High Runt Count on 6513 for Particular PC

Hi, We are currently seeing a High runt count from our 6513 Switch when we have a Desktop PC configured with a Realtek 8139 NIC installed with the lastest drivers for XP. There are no negotiation issues as both ends are setup correctly at 100/FULL. Also if we plug this device into one of our edge 3524 switches we get no errors/runts. I believe there maybe a configuration issue on our 6513. If someone could provide some info or if you require more information that would be great.
Thanks Simon

I suggest to try to enable auto-negoitation for speed and duplex to test it again. Otherwise, it may be a compatiblity issue.
It may be a silly suggestion, but please also try to replace the UTP cable and test again.

Similar Messages

I'm seeing a high runt count on my serial interfaces after upgrading to 12.

I'm seeing a high runt count on my serial interfaces after upgrading to 12.2(37).
I was looking for information on what changed in 12.2(37)and some more detailed information on runts.
I know that runts are smaller than the medium's minimum packet size. But I want more specific information and I can not find meaningfull information.
Any Ideas

On a serial interface I would contribute the runts to a timing problem which is not an easy problem to isolate esp. with a telco. Even though there may be no CRC or Frame errors.

Using aperture 3.2. How do I convert my photos back to high mg count so I can upload to a site for printing LARGE?

Help. Is it possible to convert my manipulated images (which were originally shot in RAW format) and manipulated with "plug ins/COLOR EFEX PRO" in my APERTURE 3.2 program on mac... back to a high mg count? It seems they got diluted with each layer I added. When I uploaded them to a website for BIG CANVAS printing they arrived at that site watered down to 2.-4. mgs. When they started at 18 to 20mgs.
Please I need help. Thanks.

You are welcome.
The other... I did realize that if I export and resize the photo in MOST cases I can get almost recapture the exact clarity.
Can you give an example of the cases that still look "diluted"? What image format do you use to send the images to the plug-in (in the Aperture Preferences -> Export: psd or tiff, 8bit or 16 bit), and which export do you use when exporting from Aperture?
export and resize the photo
What do you mean? At which stage of your workflow do you resize, and how exactly?
Regards
Léonie

Photoshop CC can't seem to handle complex/high poly count 3D Models. Will this be addressed?

Hello all,
I am running Photoshop CC on 3 systems and having the relatively same problems on all. The source files are exported from ZBrush- .stl or .obj files that are complex and have high poly counts. The file sizes are into the hundreds of megabytes. These are not the simple files like they show when people are using the 3D features- a racecar or simple toy rocket.
Photoshop CC doesn't seem to be able to open all the files and even when it does, the structures facings or facets don't always appear correct. I've developed a partial workaround, by merging the objects and reducing the poly count (which creates a new set of problems).
If I do get a file open, my ultimate goal is to be able to color it, add light it and render it for 2d print purposes. Again Photoshop seems to be picky- When I apply color via the airbrush tool, it usually isn't smooth. It seems to apply color by facet or facing. Same thing when I try to manually add in texture from another source file. It appears to make the detail jagged and blurry from the source file.
The appeal of using Photoshop for this process is we have people here who can do it without too much of a learning curve. Otherwise everyone else has to learn ZBrush just to color and light the models.
I've pretty much done all the troubleshooting I can and exhausted all the tools at hand. I have tried both texture painting and projections painting and all the other options. I believe the meshes are just too complicated. And if there is something incorrect in the file, such as a reversed normal, Photoshop doesn't seem to know how to deal with it. My systems have more than enough to handle the files.
Does anyone have any similar issues and is Adobe working on them in the form of a new release?
Thanks!

Hi Everyone. Thank you for writing back. I have two 2011 imacs running intel 2.93 ghz, one with 20gb or ram and one with 16gb, both have 1tb hard drives, 1gb vram, one running os 10.6 the other 10.9. I have a 3rd computer, a PC that notably handles the files more quickly, but still crashes if it doesn't like something from the original 3d model. This one has a 3.7ghz intel quadcore processor, 24gb of ram, 3tb hard drive, and a 4gb nvidia geforce video card, running Windows 8.1.
So the reason I make the statement about Photoshop and not about my computers, is that all the above computers can handle the original files in zbrush. All the above computers can handle the files in meshlab. With ease. But when I get to photoshop, I face long load times, crashing, and a lag using the tools within the 3d space. And sometimes it handles the models differently than it does in any other 3d program. It seems picky for lack of a better word.
When I say high poly count, I mean 4 million to 8 million. I am able to knock down the poly count in meshlab and that can help. But sometimes the files just don't want to open in Photoshop.
With all that said, it may be in something how some of the models were built, but again, Photoshop is the only one having an issue. And I have to add that I have been using Photoshop for 20 years and I absolutely love it. I am trying to make a case for my company to use it for coloring, lighting, and processing 3d models, but I just can't with the above issues.
Any help would be greatly appreciated.
Chris, if you need files, I can see about getting them to you. The only real issue is the work is highly proprietary and kept under wraps. So I would need to get approval and feel comfortable that is will be protected. Thanks!

High thread count on store.exe

I understand that the mdb store process utilizes as much memory as is available. My question is regarding the thread count on the process. One of the three mailbox servers tends to have a higher thread count than the other two. It
usually ranges from 150 to 200 (while the other two are usually 130 to 150) but today it is a little over 300. The rpc thread count on all the mailbox servers stays pretty low (60 or under) and the rpc thread count on the CAS servers usually
hang out around 55-65, so that's all good. All three mailbox servers also use VERY close to the same amount of memory all the time, so that doesn't seem to be making a difference. I am just trying to determine why the thread count is noticably
higher. This server and one of other mailbox servers replicate the public folder database, and I can understand why that would account for some additional activity, but you would think the thread count would be higher on the other server with the public
folder database as well, but it stays pretty low. Hardware-wise these servers are all identical. So is there something I can monitor in perf mon for instance? I don't want to use experfwiz because that monitors everything under the sun and
I need it a bit more centralized. I have googled all over the place and the only thing I can find is that with newer versions of exchange this thread count ranges from 200-300 on heavy usage, and exch07 can handle up to 500 threads, so I can't even find
which specific things to monitor that directly correlate with this issue. So while I understand that it's not really too high, I would like to find out why it deviates from the norm if the other two servers are equal for all intents and purposes (same
hardware, balanced DAG. etc). I would like to mitigate any potential issues. Thank you.

Hi pchw,
Thank you for your question.
I am sorry that we could not find the specific things to monitor this issuer directly, because there are many reason which caused it. For example: virus, big size attachment in queue, hardware performance and so on. We could refer to the following steps
to troubleshoot:
Restart the service of “Microsoft Exchange transport”;
Create a new database and move mailbox to new mailbox;
We could do some disk health check if the load test is normal;
Collect related application log and system log to
[email protected] for our troubleshooting.
We could run SDP on Exchange server and send it to
[email protected] for our troubleshooting.
http://blogs.msdn.com/b/askie/archive/2012/05/22/introduction-to-support-diagnostics-platform-sdp.aspx
We could use tools and logs to analysis if there are anything wrong or abnormal on Exchange server 2013. our bottle neck is disk IO latency, store.exe do require some CPU usage, but if our disk IO speed can keep in a normal range, the
CPU usage will be smaller. Exchange is highly rely on disk IO performance because it need lots of IO operation regarding to transaction log and database file. If Disk IO has a high latency, I will definitely impact store.exe, if it`s getting seriously sometimes
it may cause store.exe no response.
We could refer to the following link:
https://technet.microsoft.com/en-us/library/ee832791(v=exchg.141).aspx
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim

I have only a single texbox.i want to display names , date,priortiy in the same textbox when i typed @ names should be display names like when u type comment in facebook for particular person it will display name. when i type ! date should be display and

i have only a single texbox.i want to display<big style="margin:0px;padding:0px;border:0px;color:#111111;font-family:'Segoe
UI', Arial, sans-serif;line-height:normal;"> names , date,priortiy </big>in the same textbox <big
style="margin:0px;padding:0px;border:0px;color:#111111;font-family:'Segoe UI', Arial, sans-serif;line-height:normal;">when i typed @ names should be display names</big> like
when u type comment in facebook for particular person it will display name. when i type ! date should be display and when i type * priority should be display in same textbox like
example <big style="margin:0px;padding:0px;border:0px;color:#111111;font-family:'Segoe UI', Arial, sans-serif;line-height:normal;">@
names !today date or tomorrow date etc * priority high,low ,medium etc</big>

This is my first time posting here, so I'm sorry, I re-read my post several times and honestly did think I provided enough information, but you're right, it wasn't the right kind. So please (continue to) bear with me, I'm really not trying to be ignorant. I honestly assumed the issue was something I was doing wrong in Bridge, nothing to do with my computer specs.
I am using a late-2008 Macbook, running Yosemite 10.1.1 (screenshot below)
On the Mac I am using Bridge CC 6.1.1.115 and Photoshop CC 2014 (2014.2.1 release, 20141014.r.257 x64)
Here is a link to the System Info from Photoshop on the Mac
Here is a screenshot of my System Overview on the Mac
Here is a screenshot of my Photoshop performance preferences on the Mac
I am also using a Dell desktop with Windows 8, running Photoshop CC 2014 (2014.2.1 release, 20141014.r.257 x32) and Bridge CC 6.1.0.116 x32 (on a separate CC account with separate files that I don't try to sync or anything)
Here is a link to the System Info from Photoshop on the Windows computer.
Here is a screenshot of the system overview on the Windows
Here is a screenshot of my Photoshop Performance preferences on the Windows computer
I work with jpg, psd, ai, svg, and pdf files. Most of my stacks are three different file types of the same image, usually jpg, psd/ai, and pdf.
I have not recieved any error messages
I am not having issues opening raw files, I am not having printing issues, I have listed the troubleshooting steps I have taken.
Is there any information you need that I missed? I'm trying not to be a dingus, but I'll have to ask you to be patient with me in the meantime. I haven't ever looked up half the hardware/software details that were suggested and I don't know how to off the top of my head, so I provided what I already knew how to

How to get count of rows for a table?

Hi,
How to get count of rows for a table and secondly, how can i have access to a particular cell in a table?
Regards,
Devashish

Hi Devashish,
WdContext.node<Your_node_name>().size() will give you the no: of rows.
This should be the node that is bound to the table's datasource property.
WdContext.node<Your_node_name>().get<node_name>ElementAt(index_value); will select the row at that particular index.
You can access an attribute of a particular row as
WdContext.node<Your_node_name>().get<node_name>ElementAt(index_value).get<attribute_name>();
Hope this helps,
Best Regards,
Nibu.
Message was edited by: Nibu Wilson

Counting rows with a particular value

Hello. I recently posted this thread Count java problem for how to count an attribute.
Now I need that count to be limited to a certain value inside the attribute.
let me clarify. I have a table Casinos, which is connected to a table SlotsInCasinos, which is further connected to SlotMachines in a many to many with SlotsInCasinos being the intersection.
The previous post that I mentioned (thanks Timo by the way) told me how to count all the slots in a particular casino.
Now I would like to know how I could count all the slots of a particular value (for example Poker slot Machines, regular Slot machines, etc) instead of the total count in a particular object.
So on the page I would have lets say 2 output texts, one showing the number of Poker Slot Machines in that particular casino and the other showing the number of regular Slot machines in that particular casino (a third could show the number of some third kind of slot machines).
Thank you for your time

Hello everyone here is an update
I created a view object called Test, based on the entity object SlotMachinesInCasino. I then created a view link TestLink and created a master detail relationship (the same one I already had for the View Object SlotMachinesCasinosVO.
The difference is in the query for test I put the following
SELECT
    VezaTehOpTipAp.OBJEKAT_ID,
    VezaTehOpTipAp.TIP_APARATA_ID,
    VezaTehOpTipAp.VEZA_TEH_OP_TIP_AP_ID,
    TIPOVI_APARATA.NAZIV_APARATA NAZIV_APARATA
FROM
    VEZA_TEH_OP_TIP_AP VezaTehOpTipAp,
    TIPOVI_APARATA
WHERE
    TIPOVI_APARATA.NAZIV_APARATA = 'Evona'My thinking was that if I do this the estimated row count function for this will just give me the number of Evona Game machines. I tried it out in an SQL Worksheet and it gives back only the Evona machines.
Unfortunately when I create the TestIterator and then drop output text whose EL is the estimated row count for the test iterator it does not work as intended. It counts all the Slot Machines in the Object no matter the Name.
So it gives a number equal to all the slot machines instead of to the number of slot machines with name 'Evona'.
What did I do wrong?

High invalidations in v$sqlarea for 1 query tag with "SQL Analyze"

Hi All,
Hopefully post to the right forum, if not please do let me know. Thanks
I have one pre-production issue still don't have any clue how to move forward.
This is 2 RAC nodes in linux platform with Oracle 11.2.0.2
In the begininng this environment having a lot of performance issue, as huge "cursor: pin S wait on X", "latch: shared pool"
and "library cache:Mutex X" causing very bad performance in this environment. After oracle support suggest to disable few hidden paramter
and adjust some parameter, then it help to stablized the environment (according to oracle, the initial issue was caused by high version count).
But we still can find minimal "latch:shared pool" and "library cache:Mutex X" on top 5 wait event list on hourly AWR report.
This time oracle was saying it might caused by high reload and high invalidatiosn in sqlarea (not sure how true it is), luckily the event
did not caused the performance issue at this moment, but we're asking support how can we get rid of the "mutex/latch" event.
They give me one query to check the invalidations in v$sqlarea, and they suspect the high validation is causing by application.
select *
from v$sqlarea
order by invalidations DESC;
Weird thing is, there have one SQL tag with "SQL Analyze" always causing high invalidations. But we're not able to get more detail (base on SQL_ID)
in v$sql or v$session table. This SQL insert into v$sqlarea and remove within 1 or 2 seconds, hard to get more information.
And the statement is exactly the same, but don't know why SQL Analyze always checking on it.
This SQL is triggering by SYS user, and it is inserting into MLOG$ table (one of the application materialized log file)
insert into "test"."MLOG$_test1" select * from "test"."MLOG$_test1"
The v$sqlarea information as below, sometime the invalidations can hit more than 10,000
SQL_ID              SQL_TEXT                                                                                        LOADS INVALIDATIONS
0m6dhq90rg82x /* SQL Analyze(632,0) */ insert into "test"."MLOG$_test" select * from "test"."MLOG$_test 7981    7981
{code}
Anyone have any idea how can i move forward for this issue? As Oracle is asking me to use SQLTXPLAIN get the detail?
Please share with me if you have any idea. Thanks in advance.
Regards,
Klng

Hi Dom,
We have checked there have no SQL Tuning enable for this SQL_ID. Below is the optimizer parameter in this environment, the hidden parameter was changed which suggest by oracle support.
NAME                                 TYPE        VALUE
_optimizer_adaptive_cursor_sharing   boolean     FALSE
_optimizer_extended_cursor_sharing_r string      NONE
el
object_cache_optimal_size            integer     102400
optimizer_capture_sql_plan_baselines boolean     FALSE
optimizer_dynamic_sampling           integer     2
optimizer_features_enable            string      11.2.0.2
optimizer_index_caching              integer     90
optimizer_index_cost_adj             integer     10
optimizer_mode                       string      ALL_ROWS
optimizer_secure_view_merging        boolean     TRUE
optimizer_use_invisible_indexes      boolean     FALSE
optimizer_use_pending_statistics     boolean     FALSE
optimizer_use_sql_plan_baselines     boolean     TRUE
plsql_optimize_level                 integer     2
SQL> select * from dba_sql_plan_baselines;
no rows selected
SQL>yeah we did run the ash, but the high invalidation did not caputre in the report. Actually this SQL tag with sql analyze it gone from v$sqlarea very fast (only 1 or 2 seconds only).
Thanks.
Regards,
Klng

Lock particular warehouse for particular item via code

hi all,
i need particular warehouse locked for particular item via code.
i designed one form   header have item code and warehouse.
when i press the add button warehouse locked for that particular item.
Thanks & Regards
Sudhir.B

The answer is:
Using the Items Object of the DI, set yourself to the correct line and set the locked property.
for(i=0;i<oItem.WhsInfo.Count;i++)
     oItem.WhsInfo.SetCurrentLine(i);
     if(oItem.WhsInfo.WarehouseCode == "CodeOnTheForm")
          oItem.WhsInfo.Locked = SAPbobsCOM.BoYesNoEnum.tYES;

To Set Goods Receipt Indicator For Particular Line Items In SRM

Hi All,
i am working on BBP_DOC_CHANGE_BADI in SRM. i am trying to set the goods receipt indicator for particular line items based upon certain conditions. The values are being set in the badi. But when the Purchase Order is created in the backend R/3 i coudn't able to find the goods receipt indiactor being set..
i used this field to set the GR indicator
GR_IND = 'X'. " Goods Receipt Indicator
Can anyone help me in this?
helpfull answers will be rewarded....
Thanks,
Murali

To Murali and Christophe,
I have set the GR and GR non val indicator in CREATE_PO BADI but I face the following situation :
problem -
In case of multiple account assignment in the shopping cart, the R/3 transaction ME21N sets these flags.
The flag status determined as per EBP conditions is lost.
I need to retain the flag status as per EBP conditions even in this multiple account assignment scenario.
proposed solution -
- CREATE PO badi is already implemented in EBP and customised logic for GR and GR non valflag is in place.
- I create user exit in R/3 backend system in ME21N transaction
- I make RFC call in this user exit to EBP and check the table BBP_PDPSET for the shopping cart.
This is how I get the flag status as per EBP conditions and copy the same to R/3 thereby overriding the multiple account assignment check of the R/3 system.
issue -
When I tried to verify that I can check the BBP_PDPSET table from R/3, I found that this table is not having entries for all the records in CRMD_ORDERADM_I table.
For which shopping carts will the BBP_PDPSET table not be populated ?
thank you in advance,
Bhakti.

Reg:tasks are not getting displayed in the uwl mss for particular user

hi all
Tasks are not getting updated in the MSS under tasks tab for particular user in EP.can any one please share their exp and knowledge on this how to reslove it.
Thanks in advance.
Deepika

Hi Sateesh,
This message will appear if either the background jobs are not scheduled, or UWL cannot tell that the background jobs are scheduled. The message no longer appears once you ensure the background jobs are scheduled to run via the user id UWL_SERVICE and that user is mapped to my portal user ID UWL_SERVICE.
Kai

Issue to make mandatory field(SELD/BBD and Date of manufactor)in migo for particular Material type and material Number starting with'1' series.

Hi friend,
i have issue regarding mandatory self life field (SELD/BBD and Date of manufactor)in migo for Batch Tab for particular Material start with '1' Series and material type.
i want to make mandatory above field during GR from migo..any one let me know exit or badi for that to full fill this goal..
Regard's,
shaikh Khalid.

Hi Shaikh
First of all Thread is not closed seconldy as a good practice if you have resolved your issue kindly document it here so that it may help someone in future
Nabheet

Material Stock at storage location for particular date!

Dear Friend,
I need a table or bapi which gives stock for particular storage location on particular day. That is MMBE and if you go into detail list (shift+f7). I want same thing.
I have tried in MARD table, but it gives stock of a material for most current date.
Waiting for your early Reply.
Regards,
Bhavin Shah

hi check:
MB_ADD_PURCHASE_ORDER_QUANTITY
Regards
Ashok P

Total of particular items of various open sales orders for particular cust

HI.. following are my Items code :
2009, 8010, 8016, 9831, 27363, 27361, 27360, 27181, 16095.
i want the report that consists of all items to be delivered to the customer. I have created the following query :
SELECT T0.CardName AS 'Dept_Name',
(Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '2009') '2009',
(Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '8010') '8010',
(Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '8016') '8016',
(Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '9831') '9831',
(Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '27363') '27363',
(Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '27361') '27361',
(Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '27360') '27360',
(Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '27181') '27181',
(Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '16095') '16095'
FROM ORDR T0
but i want the total of particular items of various open sales orders for particular customer.
pls improve the above query.
thanks
reema

Hi,
Try this
SELECT T0.CardName AS 'Dept_Name',
(Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '2009') '2009',
(Select SUM(isnull(T1.Quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '2009') 'All 2009',
(Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '8010') '8010',
(Select SUM(isnull(T1.Quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '8010') 'All 8010',
(Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '8016') '8016',
(Select SUM(isnull(T1.Quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '8016') 'All 8016',
(Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '9831') '9831',
(Select SUM(isnull(T1.Quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '9831') 'All 9831',
(Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '27363') '27363',
(Select SUM(isnull(T1.Quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '27363') 'All 27363',
(Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '27361') '27361',
(Select SUM(isnull(T1.Quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '27361') 'All 27361',
(Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '27360') '27360',
(Select SUM(isnull(T1.Quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '27360') 'All 27360',
(Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '27181') '27181',
(Select SUM(isnull(T1.Quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '27181') 'All 27181',
(Select SUM(isnull(T1.OpenQty,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '16095') '16095'
(Select SUM(isnull(T1.Quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '16095') 'All 16095'
FROM ORDR T0
Regards,
Bala

High Runt Count on 6513 for Particular PC

Similar Messages

Maybe you are looking for