High SAR value for Nokia N79

Hi
i am planning to check out nokia n79, but the on reading the tech specs, i found it has good high SAR value, 1.40... is it advisable???..1.40 is really a high value...
Help needed....Thanks in advance...

In truth, all SAR values of all in production phones have very minimal known effects on man. This was an issue 15 years ago when SAR values were like 10x of what they are now. If you really have an issue with it, use a headset for calls.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Similar Messages

  • How to make Playlist for Nokia N79 on PC?

    Hello
    I have Nokia N79.
    I want to make playlist for it on PC.
    I tried using Ovi Player software but was not able to create playlist with it.
    Please help me out.
     Tell me easiet way to create and manage playlist for Nokia N79.
    Thanks.

    You can create a playlist on the phone in music player, or create one in Windows Media Player ans sync with phone. Or just select all songs and play random.
    Good Luck
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • Russian for Nokia N79

    Hello,
    does anybody know how to add the Russian language to Nokia N79?
    Thanks!

    Nokia doesn't provide a way for the user to add languages, though you may be able to get it done at a Nokia service point.
    Message Edited by mccbleue on 13-Apr-2009 09:03 PM

  • Full Screen Wallpaper For Nokia N79

    Hi All,
       How to set Full screen wallpaper for Nokia S60 v3 FP2 Device.Searching for this software since Long time.

    Already Used That one....
    There are lot many options other than that in that.Bit confused with that
    I installed Signed Fullscreen wallpaper .it was installed successfully.But When selecting wallper it is telling "Unable to execute Due to securtiy reasons".Its working in Fp1 devices but not with Fp2
    even with very low end phones Full scrren wallpaper is working.But y not with Nokia?

  • New FW for Nokia N79

    Europe and MEA 32.001_v9.0_N79

    bobthebob wrote:
    They fixed the screen saver! Finally!!!  
    just kidding  
     Anyway, I didn't notice any changes yet, but I only updated today.
     Also on this page it still lists v31 as the last one: http://europe.nokia.com/support/download-software/device-software-update
    I just updated my phone via FOTA this day. There is no change and  The powersaver bug not solved again.
    what does NOKIA wants to do?
    I think even they dont know what they want to fix!!!!!
    Nokia N79 4GB
    SW Version: 32.001 RM-348 MEA

  • FM Transmitter for Nokia N79

    I Bay now phone Nokia N79. The phone is great but application "FM Transmitter" is deleted.So how to back FM Transmitter in my phone.If someone now please help me.

    N79's from some countries have the FM transmitter disabled to comply with laws in those countries.
    I suggest you contact the retailer.
    The app cannot be reinstalled.

  • N8 has a higher SAR value compared with previous m...

    N8=1.02
    N97=0.66
    N96=0.82
    N95=0.50

    The SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram (W/kg) averaged over ten grams of tissue.

  • Nokia 701 SAR value

    Hello everybody, SAR value for nokia 701 has been changed from 0.69w/kg to 1.08w/kg a few months ago.What's the SAR value for nokia 701 for december made models?

    All the standard tips for reducing SAR output from phones also apply to this phone. You can find those tips by searching google.
    You may also want to check out the latest scientific studies from the last nine months or so, they may give you renewed insight on the topic.

  • Nokia N8 reduce lower SAR value

    Hi, I have noticed that nokia N8 has high SAR value of 1.02 W/kg when Samsung Galaxy 2 has SAR of 0.35 !
    I did have not found any posts about bad reception quality on samsung, so why nokia choose so high SAR value??? My old N6680 has SAR of 0.64 and thats a phone I can use anywhere, elevators, bad receptions areas you name it.
    So my quations is this:
    How can I reduce - lower the SAR value of nokia N8 with service application or plugin whatever.
    The Service manual for N8 uses software to test the transmitter with various levels of power settigns, so there should be a way to set lower power, that will increase battery life and you probably know WHO anounced that microwaves are cancerogenic don't you?
    Attachments:
    Nokia N8 reduce lower SAR.gif ‏53 KB

    It is not quite as simple as that.
    Phones always have to be below a particular SAR value, and depending on which part of the world you are in it is typically 2. That is already a very low level, so when you are comparing figures like 0.35 and 1.02 you are comparing two very small numbers below another small number that is already a threshold many times below which any harm would be caused.
    You also should know that the figure quoted is the maximum for a range of different tests and conditions including against the head, body and hand and different channels and voice and data modes, also combined with WiFi etc..
    All this means that in  a typical situation when you are just making a phone call the SAR value in most phones is below than the figure quoted - although again you are still only comparing two very small numbers....
    and the reason why Nokia doesn't allow you to change the power levels is that those are very carefully calibrated to meet the GSM and WCDMA standards otherwise the device would not be certified and allowed for sale, and would most likely not work....

  • Nokia N79 : Firmware Update

    Hi.
    Does anyone know whether there will be a firmware update for Nokia N79 soon? Its been almost 8 months since the last one. I'm on v 32.001 and there has been no update thus far.
    Kindly let me know.
    Thanks in advance.

    you just have to wait...... or contact nokia by click this link
    http://europe.nokia.com/support/contact-us
    Glad to help

  • Temperatur​e values at high fixed values

    I have two 1102/1302 with 6363 that has worked fine in the past.  After some down time I ran the vi and did not get correct values.  I investigated the virtual channels in MAX and the table has high fixed values for all channels (218-219 C) at room temperature and they are static values.  It would seem these values are not being read from any connected TCs.  Any idea as to what could cause this behavior?
    Solved!
    Go to Solution.

    teslac,
    How long has the system been sitting?
    Make sure that the hardware is physically set up correctly. Also, make sure that the correct thermocouple type is selected on your Virtual channel.
    Do you get the same values if you run the MAX Test panels?
    Do you get the same values if you run the example LabVIEW Program “Thermocouple - Continuous Input”
    Rob W.

  • Nokia n79 updated firmware 32.001 found GPS connec...

    I'm update firmware 32.001 for nokia n79 and gps signals cannot be received.
    The satellite signals usually open between 6-9 after firmware update enabled satellite just 1-2
    Please update the gps section in the next version of firmware   

    Hi, I report a bug in this firware versión. I've n79-3 rm 350 NAM. The problem is cannot acces to menu route when the languague is set in Spanish: Tools > Settings > Applications > ---- (before here appears App Settings or some else). But, when the langague set is English, this option appears
    GPS signal reception: sometimes is take too long lock the GPS signal.
    Attachments:
    CaptPantalla000012.jpg ‏12 KB
    CaptPantalla000013.jpg ‏11 KB
    CaptPantalla000014.jpg ‏9 KB

  • Unusually High MAPE Values

    Posting it again for anyone to give you some inputs.
    We ran forecast on a selection ID that has all Product-Customer combinations using Auto Model 56 in the bakground on Prod-cust level. The system has proposed a strategies like constant, croston, seasonal and so on ..which is fine.
    We have set up a limit of 80 for the Error Metric MAPE in the Diagnosis group. If I am not wrong, MAPE is a percentage value and 80 should mean 80%. But after the forcast run using 56, the system generated  abnormally high MAPE values, for example MAPE values obtained are in 10's of thousands like 2,956,009.830 and even 10,000,000.000 . These are no where close to our limit 80. MAPE is the average of absolute percentage differences between Acutals and Expost forecast. So how could system generated MAPE be so high for all the combinations . Are we supposed to read it differently, because i thought auto model though may not propose the best fit model parameters, but atleast not give us a forecast which has such high MAPE values. I was expecting MAPE within 100 or worst case 200, 300 but not thousands and millions..
    Am I missing something ? Please help - Susan

    Hello Susan
    You could use the MAPE-A. You have to implemnt it on your own in a badi.
    The MAPE-A ist a value between 0-2.
    Hope thats helps you.
    Sven

  • Why doesn't Nokia mention Lumia 920s SAR values ?

    I bought the new shiny Lumia 920 windows phone. After using it for over a day I noticed that the battery gets drained out too quickly. Also, I noticed that amount of static charge my body gets since I started working with Lumia 920 is quite more than before. 
    I am concerned about the SAR rating Lumia 920 has in India. What concerned me more was the fact that when I looked into Nokia's website, they didn't publish the SAR rating. I should have checked this before, but why is the SAR rating of Lumia phones not mentioned in Nokia's website ?
    http://www.nokia.com/global/about-nokia/people-and-planet/emf-health/sar/sar-information/ 
    -Pranav

    pranavkojha wrote:
    Also, I noticed that amount of static charge my body gets since I started working with Lumia 920 is quite more than before.
    http://www.nokia.com/global/about-nokia/people-and-planet/emf-health/sar/sar-information/ 
    No offense but this just seems ridiculous... Why would you get more static in your body beacuse of a phones SAR value? It just seems very far fetched.

  • Why am I getting very high values for the very low frequency region of a random signal?

    I am tyring to produce a power spectrum graph for a Tachogram data, related to Heart Rate Variability Analysis. This data can be thought to be as a random signal, but has a frequency spectrum range of 0 - 1HZ.
    The problem that I am facing is, I am getting very high values for very low frequency region, closer to DC value. Even the DC value is really high, in the range 10^8. It is suppose to be a low number. Any suggestions would be appreciated.
    Thanks.

    Here is what my work is all about. I am trying to develop a software for Heart Rate Variability analysis. I am not sure if you are aware of heart beat waveforms, they are bunch spikes, occuring at irregular intervals. We have to do analysis on this waveform. How ? First we have to create a plot called Tachogram. This is done by, for example, let's name the first spike R1, the second one R2, and the third one R3, and so on. This is how the co-ordinate points are created. (R1, R2-R1), (R2, R3-R2), and so on...
    Here R1 is the time instant at which the spike R1 occurs, and R2-R1 is the time difference between these peak occurences. So, if we plot these values, then it gives us one like what you saw on your time domain plot. What we have to do with this signal is, we have to apply FFT technique to produce its power spectrum for analysis. Generally the frequency range of the spectrum goes from 0 - 0.5 Hz. They part this range into VLF, LF, and HF, and analyze how much power is distributed in these regions. The distribution would tell you if you were stressed out,or have worked out, things like that. Normally, you can view spikes around LF, HF region. If you had viewed the power spectrum for the data that I sent, then that's what it pretty much looks like. I think I have said a lot about it now. Hope you get it.
    We were talking about the "other component", I can't really see where it lies, must be in the 60-80 sec. range in the graph. If you look at the spectrum, I am getting a huge value around 0.0033 Hz, how do I minimize or remove this ?
    Also, I am using Unevenly Spaced Signal Spectrum.vi, I am not sure what excactly is the unit for the Power Spectrum output. Technical Papers denote, Periodogram algorithm used by this VI, gives Power Spectral Density ? If that's right, then the unit is V^2/HZ.
    Please advise.
    Again, I should thank you for your time and effort.
    I have to meet a deadline this week in finishing this project, and your help is immense to me at this point.
    Thanks & Best Regards,

Maybe you are looking for

  • Iphone 4 battery life draining battery usage and standby has (-) sign

    I know there are forums with the same question, however, I need to know what to do if the restore as new doesn't work as well as trying to turn off the notifications. My battery life was fine until I up graded to iOS5.0.1. I've also done a hard reboo

  • Return multiple links (href)

    Hi, I am customizing a software application using Stored Procedure and XML to display information on multiple links (a href tag). My scenario is as follows. I am accepting SP parameters and returning reference cursor for 1 or more records (depending

  • Customer Re-Imbursement in F110 issue

    Hi, I have raised customer credit memo and trying to do F110 for payment program. In Edit proposl screen i am not able to do Re-Allocate transaction there. It is giving the below error. Payment method not defined in company code 1000 Payment method a

  • Message variant is missing in INBOUND IDOC.

    hi, Any one can help on this issue? The sender has confirmed that message variant was filled in outgoing file. However, When we received this Inbound IDOC, the message variant is blank. I still am confused by two questions: 1. The function module whi

  • Mail & Exchange - Sent Messages not appearing in Sent mailbox

    Once setting up an Exchange account in Mail everything seems to be working fine except that when I send any emails they don't appear in the "Sent" folder. When I log in under webmail they do appear. Anyone else find a solution to this problem? Thanks