High Severity alerts from network TAB in LMS 3.1

I have attached the screenshot of the High Severity alerts from network TAB in LMS 3.1
In that it is having alert ID also , could you please update me about this alerts.

Click on the alert ID to get more details about the event(s) in these alerts. The events will contain the informative details about the condition of the devices.

Similar Messages

Not displaying ......high severity alert.. Cisco prime 4.2.2

i have installed lms 4.2.2 fot testing purpose i can do inventory and other functions but i cant get fault event and fault monitor alert.

No one Have ans for the question...... Please help.... We r getting utilization and other alert..... like we seen in HUM in previous versions.....but we r not not getting device up down & other respective alerts in high severity alerts.

'High' Priority and 'critical' severity alerts from all MP's in SCOM 2007 R2

Hi All
Can anyone help me with the script to get all alert details from monitors and rules which are set to "high" priority and "critical" severity in SCOM 2007.
Regards
Madhavi

You can below script to show all agent which isn't health
$ReportOutput += "<h2>Agents where Health State is not Green</h2>"
$ReportOutput += Get-Agent |
where {$_.HealthState -ne "Success"} |
select Name,HealthState | ConvertTo-HTML
-fragment$ReportOutput += "<h2>Agents where the Monitoring Class is not available</h2>"
$AgentMonitoringClass = get-monitoringclass
-name "Microsoft.SystemCenter.Agent"
$ReportOutput+= Get-MonitoringObject-monitoringclass:$AgentMonitoringClass|
where{$_.IsAvailable -eq$false} |
selectDisplayName | ConvertTo-HTML-fragment
Also you can refer below links
http://www.definit.co.uk/2012/01/scom-2007-r2-daily-health-check-script/
http://www.blackops.ca/cms/blog/?p=155
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical

Device Alert from Cisco LMS

Hi All,
I am currently getting buried in a flurry of alerts from Cisco LMS. However when I check on the device in fault manager or with Device Diagnostic Tools, I do not see any issues. Anyone have any ideas as to why these alerts are being generated? ( I have removed our specific info with xxxx)
Additionally, I don't want to seem like I am bashing the LMS product, but could these alerts be made any more cryptic?
ALERT ID                = 00001LI
TIME                    = Wed 24-Mar-2010 01:21:49 GMT-06:00
STATUS                  = Active
SEVERITY                = Critical
MANAGED OBJECT          = xxxx
MANAGED OBJECT TYPE     = Switches and Hubs
EVENT DESCRIPTION       = xxxx: Cisco Configuration Management Trap:InformAlarm; xxxx [xxxx]:Unresponsive;
ALERT ID                = 00001LI
TIME                    = Wed 24-Mar-2010 06:54:37 GMT-06:00
STATUS                  = Active
SEVERITY                = Critical
MANAGED OBJECT          = xxxx
MANAGED OBJECT TYPE     = Switches and Hubs
EVENT DESCRIPTION       = xxxx: STP Topology Change:MinorAlarm; xxxx [xxxx]:Unresponsive;
ALERT ID                = 00001LI
TIME                    = Wed 24-Mar-2010 13:13:16 GMT-06:00
STATUS                  = Active
SEVERITY                = Critical
MANAGED OBJECT          = xxxx
MANAGED OBJECT TYPE     = Switches and Hubs
EVENT DESCRIPTION       = xxxx: vlanTrunkPortDynamicStatusChange Trap:InformAlarm; xxxx [xxxx]:Unresponsive;
ALERT ID                = 00001LI
TIME                    = Wed 24-Mar-2010 13:13:52 GMT-06:00
STATUS                  = Active
SEVERITY                = Critical
MANAGED OBJECT          = xxxx
MANAGED OBJECT TYPE     = Switches and Hubs
EVENT DESCRIPTION       = xxxx: STP Topology Change:MinorAlarm; ess016184.casino.sk.ca: vlanTrunkPortDynamicStatusChange Trap:InformAlarm; xxxx[xxxx]:Unresponsive;
ALERT ID                = 00001LI
TIME                    = Wed 24-Mar-2010 14:05:49 GMT-06:00
STATUS                  = Active
SEVERITY                = Critical
MANAGED OBJECT          = xxxx
MANAGED OBJECT TYPE     = Switches and Hubs
EVENT DESCRIPTION       = xxxx: vlanTrunkPortDynamicStatusChange Trap:InformAlarm; xxxx: STP Topology Change:MinorAlarm; xxxx [xxxx]:Unresponsive;
Thanks,
Rick

The alerts are quite generic. The individual EVENT details will contain many more details. Initially, it looks like DFM is showing you trap information relating to config and STP changes. If you have determined that these are not important, then you can clear the events (or mark them as acknowledged). If you're receiving these as notifications (e.g. email notifications), you might consider creating event sets to filter the events to just the ones in which you are interested, then unchecking the boxes for alerts in your Notification Group.

Wifi option disappeared from system preferences network tab

I used wifi at home in the morning, with no problem. I used ethernet during the day at work. When I got home, wifi wasn't working. At first, it was still an option in the Network tab of System Preferences (along with Ethernet, Firewire & Bluetooth PAN). When I clicked on 'Assist Me,' and started the process, I wasn't able to give the information needed. When I clicked 'Go Back' until I got to the main Network screen, the 'WiFi' option was no longer present. It is also not an option with I click on the "+" button to add a network option. In addition, on the top bar, the WiFi icon is greyed out, with an 'X' in it. Clicking on it shows: "WiFi: No Hardware Installed."
To add to the fun, when I called Apple Support, he had some resets in mind to try, but my computer will not stay off. Clicking 'Shut Down,' turns it off, but then right back on. Holding the power button turns it off, but he had me unplug the power for a minute, then plug it back in. When I do plug back in, it restarts again, on its own.
Any help would be greatly appreciated... Thanks!

In many cases, this issue is caused by a hardware fault. A short circuit or a microscopic break in a solder joint may open and close depending on temperature, making the failure intermittent.
Test after taking each of the following steps that you haven't already taken. Back up all data before making any changes.
1. If you can connect to the Internet via Ethernet, Bluetooth, or a USB network device, make sure all available OS X updates are installed. If Wi-Fi is your only means of network access, skip this step.
2. Reset the NVRAM.
3. Reset the System Management Controller.
4. Start up in Recovery mode. In the menu bar of the OS X Utilities screen, there's a Wi-Fi menu. If it works, selectInstall OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
5. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

How to stop javascript alert popups from stealing tab focus?

I have two gmail accounts, and usually a lot of tabs open. So sometimes I log into my other gmail account while a tab somewhere else still is logged in to my other. Sooner or later, the gmail with the old login session notices this, and makes a little alert() popup telling me I've been logged out, a couple minutes after I checked my emails on the other account.
Now the problem is, that firefox because of this alert() popup instantly jumps to that tab, and I lose my place in my tab-jungle. This is very annoying. How do I prevent this inactive tab from stealing my focus/alert messages autofocusing tabs?

Hello,
Yes I know, but I don't want to do this. Is there any way to stop firefox from behaving this way?
Thanks

Alerts from Norton re high memory usage by plugin-container.exe

Running Firefox 3.6.13 on Windows XP Pro Service Pack 3. The details from Norton are as follows:
1. Program Path C:\program files\Mozilla firefox\plugin-container.exe
2. Program Description - Plugin Container for Firefox
3. Memory - 1,676 MB used
4. Disk Write Activity - 10 MB (total for this process)
5. File Origin - Source File = updater.exe, File Created: firefox.exe,updater.exe,plugin-container.exe

Probably the alerts are nothing to worry about, and you may wish to suppress that particular alert.
On a couple of old spec legacy machines I recently switched. <br>Partly because of economics, and partly because , of the two, <br> Norton can perform better (in my opinion) on legacy machines.
The first thing I did notice was that Norton does pulse updates and background tasks very frequently (configurations can be changed) by default, and flags up quite a number of alerts.
The Norton (NIS) 'Insight' facility will be flagging up firefox plugin container.exe. It can be configured to suppress the alerts from firefox plugin container, but unless disabled will probably just flag up another busy process or application. It is not flagging it up because it is a known security problem, merely because of the amount of activity.
I imagine the alerts are when you are playing videos, probably with FlashPlayer, and may well depend on the resolution/quality of the videos.
If you think the results are unusual or unexpected see:
*[[High memory usage]]
*[[Firefox consumes a lot of CPU resources]]
PS not sure what is happening with this post are some phrases unacceptable eg alternative expressions about economics; one paragraph was behaving oddly in preview resorted to manually adding break tags to keep it within the container.

I bought a new MacBook Pro several months ago. I keep losing my wireless connection (my wife, sitting several feet from me has no problem with her iPad2). I find the quickest fix ix to turn Airport off and back on. Very annoying. Suggestions please?

I bought a new MacBook Pro several months ago. I keep losing my wireless connection (my wife, sitting several feet from me has no problem with her iPad2). I find the quickest fix ix to turn Airport off and back on. Very annoying. Suggestions please?

What kind of wireless router are you using? more importantly which protocol are you connecting with? Are you and wife connecting using the 2.4Ghz band? or do you have a dual band router that offers the 5GHZ band? Are you both connecting vie 802.11 a/b/g or n?
The best thing to do is to go into SYSTEM PREFERENCES and select NETWORK, then select AIRPORT and click on the ADVANCED button.
Under the AirPort tab you should delete all the preferred networks and only add back in your network with the proper security settings and passwords.
If you hold down the option key on your keyboard while clicking on the airport icon at the top on your macbook pro. you'll seesome data that will tell you what band and mode you're connecting at, as well as in an indication of signal strength (RSSI) if you write down and post back that information it'll tell us what's going on.

ORA-02068: following severe error from ....

Hi,
we have a dataguard setup for 10g databases on AIX platform as below.
host1(TALON) host2(CATALINA)
TICSPROD (PRIMARY ) TICSPROD(STANDBY)
PLSPROD (STANDBY) PLSPROD (PRIMARY)
We have decided to recreate PLSPROD STANDBY(because of some setup issues) this weekend and last night we just disabled the PLSPROD STANDBY.Means now only PLSPROD PRIMARY is working.
Last night, suddenly in the PRIMARY TICSPROD alert log file we see the below error.Is it because of the dataguard issue or any other issue.Please help as we have no clue how to resolve this.
ORA-02050: transaction 4.34.2844973 rolled back, some remote DBs may be in-doubt
ORA-02068: following severe error from PLSPROD
ORA-03113: end-of-file on communication channel

We have decided to recreate PLSPROD STANDBY(because of some setup issues) this weekend and last night we just disabled the PLSPROD STANDBY.Means now only PLSPROD PRIMARY is working.
Last night, suddenly in the PRIMARY TICSPROD alert log file we see the below error.Is it because of the dataguard issue or any other issue.Please help as we have no clue how to resolve this.
ORA-02050: transaction 4.34.2844973 rolled back, some remote DBs may be in-doubt
ORA-02068: following severe error from PLSPROD
ORA-03113: end-of-file on communication channel
What are the parameters of standby
post
show parameter dest_2
show parameter state_2ORA-02050:
     transaction string rolled back, some remote DBs may be in-doubt
Cause:      network or remote failure in 2PC.
Action:      Notify operations; remote DBs will automatically re-sync when the failure is repaired.
defer the destination state 2 also refer the below link
http://www.orafaq.com/forum/t/67115/2/

Network tab shows up as removable Volume

Hi,
For some odd reason, on my Powerbook G4, the network tab in Finder windows, shows up as a Removable Volume. That is, with the "remove" triangle, next to it. I also can't access the Network Window directly from the "Go" menu in the Finder.
Both symptoms disappear when I "Force Restart" the Finder. However they appear again when I start up the Powerbook.
Any ideas as how to fix this?
iMac G4 800 MHZ Flat Panel Mac OS X (10.4)

Ian,
Have you tried re-assigning the drive letter to a higher letter. I have ten drives on my system which would confuse the ipod so I had to use a letter above "M".

How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?

How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?
I currently run OS X 10.10.1
Now i have been trying to work on this for a while now and what i want to do should be simple but its apparently not.
Here is an example of what i want to happen.
I will have 2 tabs: Contact | Sales
Now Contacts will have the list of names and various information about a customer, While Sales will have one drop-down box for each Cell Row that will show the names of the person in tab contacts
for what i am wanting to do i cant use the data format pop-up menu because the list is edited everyday several times a day.
Now how do i do this, Excel can do this so how can numbers do it?

Hi Shegra,
Paste this into a applescript editor window and run it from there. In the script you may need to adjust the four properties to agree with your spreadsheet. Let me know if you have any questions.
quinn
Script starts:
-- This script converts column A in one table into an alphabetized list of popups. It copies the last cell in that column. Then reverts the column to text. It then refreshes popups in column A of a data table starting with a user defined row.
property DataEntrySheet : "Sheet 1" --name of sheet with popups to be refreshed
property DataEntryTable : "Sales" --name of table with popups to be refreshed
set copyRange to {}
property PopValueSheet : "Sheet 1" --name of sheet with popup values table
property PopValueTable : "Contacts" --name of table with popup values
set PopStartRow to {}
tell application "Numbers"
set d to front document
set ps to d's sheet PopValueSheet
set pt to ps's table PopValueTable
set s to d's sheet DataEntrySheet
set t to s's table DataEntryTable
set tf to t's filtered --this records filter setting on data Entry Table
display dialog "Start from row #..." default answer "" with icon 1 -- with icon file "Path:to:my.icon.icns" --a Week # row
set PopStartRow to {text returned of result}
tell pt --convert list to alphabetized popups
set ptRows to count rows
set copyRange to ("A2:" & name of cell ptRows of column "A")
set selection range to range copyRange
set selection range's format to text
sort by column 1 direction ascending
set selection range's format to pop up menu
-- popupsmade
set selection range to cell ptRows of column 1 of pt
set v to value of cell ptRows of pt
end tell
activate application "Numbers"
tell application "System Events" to keystroke "c" using command down
tell pt
set selection range to range copyRange
set selection range's format to text
end tell
tell t
set filtered to false
set tRows to count rows
set pasteRange to ((name of cell PopStartRow of column "A") & ":" & (name of cell tRows of column "A"))
set selection range to range pasteRange
tell application "System Events" to keystroke "v" using command down
set filtered to tf
end tell
end tell

I have an iphone 3G 16GB 4.2.1 - i moved back to canada and got telus mobile service. they cant get phone working because cellular data network tab/button is not on my phone. How do i get it on there

i have an iphone 3G 16GB 4.2.1 - i moved back to canada and got telus mobile service. they cant get phone working because cellular data network tab/button is not on my phone. How do i get it on there

OK. T-Mobile is NOT owned by AT&T... yet... The deal hasn't gone through yet. T-Mobie's US network is not compatible with the iPhone. Lots of things don't work right. There is not, and never has been an unlocked 3G sold in the US. Don't know where the phone originated, but more than likely it was in the US. If that's the case, the phone has been hacked/jailbroken to get it to work.
Have you tried doing a restore or restoring the phone as new? I have to warn you, if you do so and the phone is hacked/jailbroken, it will re-lock to AT&T and will become unusalbe. I think your best bet right now might be to save yourself a lot of grief and just upgrade to new phone from a legitimate source.
I would never even consider buying an iPhone on ebay. 99% or more are hacked, jailbroken and/or stolen.

Getting Selections from each Tab of a Script UI Tabbed Panel

I am in the process of creating a script to import fields from any tab delimited file. Mainly for directories but at times we have other items. The number and names of fields are always changing so it has to be flexible. The user first selects the file, then selects the field names, and orders the field names. That all works. The next step is for the user to then select the formatting to go between each field. Which is where I run into a problem.
The below is created from the array of the ordered field names, as you can see the creation of the box works fine. The tab names are the names of the field and they show up in the right order. However, no matter what I select on the other tabs my value is always defaulting to whatever the last selection (in this case the selection on the Streetname tab). What is really weird is I am getting the correct name of the tab but not the correct formatting for that tab- no matter what I've tried I get only the formatting for the last tab. I have gone through multiple rounds and numerous searches and can't seem to figure out what is wrong. Any help would be appreciated.
//|||||||||||||||||||||||||||||||||||||||||||| function formatFields(finalList) ||||||||||||||||||||||||||||||||||||||||||||
//From the selected headers arrange in the order they should be imported
function formatFields(finalList){
    //set formatting variables for preview window
    var Pvw_space = "\u00A0"; //unicode space character for preview window
    var Pvw_tab = "\u00A0\u00A0\u00A0\u00A0\u00A0\u00A0\u00A0\u00A0\u00A0\u00A0\u00A0"; //unicode space characters simulating tab for preview window
    var Pvw_flb = "\n"; //forced line break for preview
    var Pvw_comma = "," + Pvw_space;
    var Pvw_string = "";
    var selForm=[];
    //create and populate tabbed window
    var FF_win = new Window ("dialog", "Select formatting for each field", undefined, {closeButton: false});
    FF_win.alignChildren = "right";
    var tpanel = FF_win.add ("tabbedpanel");
    tpanel.alignChildren = ["fill", "fill"];
    tpanel.preferredSize = [350,300];
    //create one tab for each field
    for (i = 0; i < finalList.length; i++) {
        var tabName = finalList[i].toString();
        var general = tpanel.add ("tab", undefined, tabName,{name:tabName});
        general.alignChildren = "fill";
        var g_options = general.add ("panel", undefined, "Please select the formatting to follow this field");
        g_options.alignChildren = "left";
        g_options.tab = g_options.add ("radiobutton", undefined, "Tab");
            g_options.tab.value = true;
        g_options.flb = g_options.add ("radiobutton", undefined, "Forced Line Break");
        g_options.space = g_options.add ("radiobutton", undefined, "Space");
        g_options.comma = g_options.add ("radiobutton", undefined, "Comma");
    //Preview and Cancel buttons
    var Confrimgrp = FF_win.add("group");
    Confrimgrp.orientation="row";
    var Prev_button = Confrimgrp.add("button",undefined,"Preview",{name:"ok"});
    var Back_button = Confrimgrp.add("button",undefined,"Back",{name:"cancel"});
    //determine sorting of list
    Prev_button.onClick = function() {
        for (i = 0; i < finalList.length; i++) {
            with (FF_win.findElement(finalList[i].toString())){
                if (g_options.tab.value == true){
                    alert (finalList[i].toString() + ": tab");
                if (g_options.flb.value == true){
                    alert (finalList[i].toString() + ": FLB");
                if (g_options.space.value == true){
                    alert (finalList[i].toString() + ": space");
                if (g_options.comma.value == true){
                    alert (finalList[i].toString() + ": comma");
    Back_button.onClick = function(){$.destroy();}
    //show dialog
    FF_win.show();
    Back_button.onClick = function(){$.destroy();}
    //show dialog
    FF_win.show();

Adding an instance moves it, it does not copy it.

Get Url from all tabs

Hello,
I feel like this is something simple but I cannot write a correct script to do it.
How would I write a script that just gets the urls of all tabs in safari?
then if one exists, it selects that tab to be opened.

Would It be easier that instead of telling safari to open that tab if it exists, to set the beginning part of my script that gets info from safari to get info from all tabs, for a specific tab only?
I don't understand your goals to be able to tell you what you want. Given what you've said in earlier posts it sounded like you wanted to see if a particular URL was present in any tab and if so activate it. That doesn't seem to be the case any more. You'll need to more clearly explain what you're trying to do in order to progress.
I purchased a book http://apress.com/book/view/1430223618 which I am going to use to better help me make applescripts as well as cocoa-applescript applications in xcode. Do you think this book will be able to help, or is there another I should look at?
That book, like most others, covers a lot of the theory behind AppleScript - the concepts behind AppleScripts/Apple Events, and things like handlers, process flow, etc.
It will not tell you how to do what you want, because what you want is something very specific - unique, even. What it might do is give you the fundamental building blocks to work out how to build your script to do what you want. For example, I've shown you some examples of how to find out what tabs are present, how to activate a tab, how to switch windows, etc. The book might do the same thing (albeit spread throughout several chapters). It's a matter of putting that together in a way that achieves your goal.

How to generate alerts from the oaf page

hii.......
I need to generate simple alert from oaf page...........
can u suggest me sample code for this????????

Hi Nazeer,
Nazeer again and again you are replying the same answer and again and again I'm asking you the same question.
What do you mean by alert?? is it some mail that you want to send from OAF page??
sample code to send mail from OAF:
import java.io.*;
import java.net.*;
* This program sends e-mail using a mailto: URL
public class SendMail {
public static void main(String[] args) {
try {
// If the user specified a mailhost, tell the system about it.
if (args.length >= 1) System.getProperties().put("mail.host", args[0]);
// A Reader stream to read from the console
BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
// Ask the user for the from, to, and subject lines
System.out.print("From: ");
String from = in.readLine();
System.out.print("To: ");
String to = in.readLine();
System.out.print("Subject: ");
String subject = in.readLine();
// Establish a network connection for sending mail
URL u = new URL("mailto:" + to); // Create a mailto: URL
URLConnection c = u.openConnection(); // Create a URLConnection for it
c.setDoInput(false); // Specify no input from this URL
c.setDoOutput(true); // Specify we'll do output
System.out.println("Connecting..."); // Tell the user what's happening
System.out.flush(); // Tell them right now
c.connect(); // Connect to mail host
PrintWriter out = // Get output stream to mail host
new PrintWriter(new OutputStreamWriter(c.getOutputStream()));
// Write out mail headers. Don't let users fake the From address
out.println("From: \"" + from + "\" <"user.name") + "@" +
InetAddress.getLocalHost().getHostName() + ">");
out.println("To: " + to);
out.println("Subject: " + subject);
out.println(); // blank line to end the list of headers
// Now ask the user to enter the body of the message
System.out.println("Enter the message. " +
"End with a '.' on a line by itself.");
// Read message line by line and send it out.
String line;
for(;;) {
line = in.readLine();
if ((line == null) || line.equals(".")) break;
out.println(line);
// Close the stream to terminate the message
out.close();
// Tell the user it was successfully sent.
System.out.println("Message sent.");
System.out.flush();
catch (Exception e) { // Handle any exceptions, print error message.
System.err.println(e);
System.err.println("Usage: java SendMail [<mailhost>]");
Regards,
Reetesh Sharma
Edited by: Reetesh Sharma on Jun 30, 2010 3:27 AM

High Severity alerts from network TAB in LMS 3.1

Similar Messages

Maybe you are looking for