High speed cameras

not quite FCP related..well, sorta. anyhow, does anyone have any suggestions as far as high-speed cameras (500-1000fps) for outdoor, action-sport usage? i've checked into a few rental houses, and there's a decent variety, but i haven't used one before and don't know if there's a specific one that would work better than another. this would be used on snow (for snowboarding) but in warm temps (40-70 degrees F. You can snowboard/ski on Mt Hood in oregon in the summer, if you're wondering).
also, is there anything i need to be concerned with when importing and editing this footage in FCP?
thanks for any help!

i think, gardner, you're on the bleeding edge here. i can honestly say i've never in my several years here seen this come up.
my experience with super mo cams are reconfigured studio cams shooting 90fps into discrete r,g,b channels and then fed into an evs for even slower motion. feisty beasts i must say! also, i've yet to see a hd super mo. whenever i work an hd show and there's a mo, it's upconverted to hd from sd.
i do not have any sort of experience with handheld super mo's like the phantoms from vision research. http://www.visiblesolutions.com/?sector=htm/app&page=products&prodcatid=1
that being said, if you're working in standard definition, at the end of the day, it has to be ntsc 29.97 fps video, plain and simple. just because something was shot at 1000fps, it's still ntsc 29.97 fps video.
good luck and i find this interesting so post back with your findings and please post any video you shoot.
zeb

Similar Messages

  • Digital start trigger and high speed camera

    Is there any particular option or way available in LabVIEW to initiate the data acquisition and high speed camera using a digital start trigger? If yes, shall I create a task for high speed camera and then synchronize it with the other tasks?
    Kind Regards, 

    Hi Helen19411,
    The way to trigger data acquisition in LabVIEW is to use the 'DAQmx Start Trigger VI'. To set this up I recommend taking a look at this example: 
    http://www.ni.com/example/25282/en/
    Without any information about the high speed camera you are using, I can't give much advice. If the device is viewable in MAX then you may be able to create a task, and so long as you synchronise both channels in your code, the digital trigger should activate both events.
    Kind Regards,
    TomS
    Applications Engineer
    National Instruments

  • Replace MiDAS with labview in a high speed camera

    Has anyone out there used MiDAS for high speed camera aquisition? The camera came with MiDAS. However the camera can be operated through labview which I'd prefer for better data aquistion. Does anyone have a program for this? Or know somewhere to look? Or help me get started to build my own program.
    The camera will be connected to a NI USB 6251
    Thanks!
    Hova

    Let's consolidate these threads into one.
    Chris Bolin
    LabVIEW Partner Program, CLA

  • Timeout errors when using high speed camera.

    Hi all.
    I'm currently trying to capture images using a Mikrotron EoSens MC1363 camera at high frame rates >500fps. The issue arises when the region of interest (ROI) is decreased in the microtron software (of which screenshots are attached). The ROI must be dropped in order to increase the fps. When MAX is opened and configured to match the camera settings, and grab is initiated, the timeout error occurs. I've attached screenshots of the mikrotron software, max settings, the error and PC used. The OS is windows 7 64 bit. We use the camera config file for the mono version of the camera which i've been informed will cross over to satisfy the colour version we use. Any questions feel free to ask. Thanks.
    Attachments:
    errors.docx ‏3016 KB
    997-EoSens 3CL-MC1362-Manual.pdf ‏1209 KB

    Hi Dom.
    As you said the maximum frame rate with the ROI set to 1280 x 1024 is 505fps but according to the general information for the camera series:
    The Mikrotron EoSens camera series features extremely sensitive high-speed
    CMOS sensors available in monochrome or in colour with a resolution of 1280 x
    1024 pixels and capture rates of 110 or 500 frames per second. Depending on
    the model the image data is transferred in 8 or 10 bits via either CameraLink
    (Base, Medium or Full) or Gigabit Ethernet.The region of interest (ROI) can be
    freely selected, and the cameras can achieve even higher capture rates up to
    120,000 fps when the ROI is reduced
    Therefore it was my thought that by reducing the width of the ROI increased frame rates may be reached. Realistically we're looking for as high frame rates as possible so that the camera has capability to pass between projects. Currently the moving object enters and leaves the ROI within a 4 frame window, so frame rates of up to 1000fps would generate more data. Naturally, a point will come where the data cannot be physically written as fast as it is generated (>600MBps). Therefore it would be useful to get a handle onto why the error occurs as well as methods to fix it. Hopefully the problem is being discussed between NI and Mikrotron and we may have some answers in the near future.

  • LabVIEW 8.5 high-speed camera

    Hi,
    I'd like to take many
    high-speed images with a camera, and save them to a disk, or my computer's hard drive. I congfigure the camera (it is a Pulnix TM-6740cl camera) with the Measurement and Automation Explorer (MAX.) I take the pictures with LabVIEW. I've found an example program in LabVIEW that is close to what I want; it was written by two members of this forum, N_Holmes and reut. The only differences between that program, and
    the program that I'd like to run is that I need to be able to change
    the shutter speed of the camera (although I believe that I can do this
    with MAX), I'd like to be able to change the target
    directory (for some reason, if I change the directory with the reut
    program, the camera only takes 1 "frame" and stops), and I'd like to be
    able to save a file for each frame taken by the camera (I can only get
    the reut program to save 1 file.) I have LabVIEW version 8.5. If you
    could help me out in any way, then that would be greatly appreciated. Thanks!
    Attachments:
    grab images and Save to FileReut-11.vi ‏67 KB

    Hi Bolin,
    I'm using an NI PCI 1426 with NI-IMAQ, 18MB. Thanks for your previous help. I've actually worked on the program, and I got the camera to take multiple pictures. I also incorporated a part in the program that decodes the raw bayer image that this camera outputs.
    I do have some other questions, though. First of all, I'm not entirely sure what you mean by "trigger." I use the computer to take the pictures; MAX configures the camera, and LabVIEW sends the signals to the camera to take the pictures, and then saves them on the computer. Also, I know this is probably a bad question, but I'm not 100% sure where in MAX I can look to find out what framerate I'm acquiring at. I'd like to acquire pictures at the camera's maximum framerate, which I believe is somewhere over 1000fps. I tried many different methods in order to capture at the maximum framerate, and the best option seemed to be at the settings: manual shutter, shutter setting 0, 4X4 binning. However, my pictures were of extremely poor quality, and they were very dark.
    Also, where can I go in MAX to change the shutter speed? I've tried changing the shutter control setting and the shutter setting number; I just want to verify that this is correct.
    Thanks again for your help! Once I can figure out how to make these pictures take at maximum speed, and at the best quality, then I can finally start on my project!

  • Using the iphone to view a video recorded on a separate high speed camera

    I use a high speed video camera to film athletic motion. Can I play this back on my iphone? The files are in avi format and would I require any adaptors. Thanks, I am very new to using the iphone.

    Does anyone know what settings I should use to export a 1080p video for playback on iPhone4? I'm hoping to use the iPhone4 to playback 1080p video on 1080p monitor. Is this possible?
    No. Only the iPhone 4S, iPad3, and TV3 currently support 1080p30 content. Even then the 1080p30 playback support for your monitor may depend on how the device is connected. The iPhone 4 is limited to 720p30 playback.
    Is it possible to keep the higher quality for playback through a 1920x1080 hd monitor?  Otherwise, would I be able to sync a 1920x1080 mov file to a new iPad or other device?
    Not on your current device. As previously stated, the latest generation of iPhone, iPad, and TV devices support a maximum 1080p30 playback capability but may be limited to lower resdolutions depending on your method of connection to your monitor. This information can be found on the Apple web site TechSpecs page for each respective device.

  • Accessing high-speed camera

    I have a high-speed firewire camera, model Basler A620fc (max. fps = 100).
    Is it possible to use JMF to capture AVI movie from that kind of device?
    Note that camera must be connected to PC through firewire port.
    Any advice or code sample?

    Download the JMStudio, and see if that's listed as a capture device. Anything that JMStudio can capture from, JMF obviously can capture from.
    If your OS supports the camera, you should theoreticlly be able to use it in JMF.

  • High speed camera recommendations

    Looking to aquire 120FPS. Can someone recommend a camera and/or interface that would be very easy to integrate with labview (to decrease dev time)?
    Thanks! 
    At least I have chicken

    Hi labviewleroy,
                              There is'nt much information in your question.Please try to explain it more clearly.
    Thanks as kudos only

  • Advice on buying camera for stills and high speed video

    Hello video pros,
    I'm a music composer who occasionally dallies with some simple photographic and video work. I'm looking for some advice re picking up a camera to make some simple videos, but with the highest quality I can get with consumer grade gear.
    I am pretty much ruling out consumer grade camcorders for two reasons:  One is that I want to be able to shoot high quality stills and make stop motion videos from very high res stills.  The other is that I don't need audio recording at all because the video will always be just to accompany music - simple music videos basically.  So I'm much more interested in the recent mid range point-and-shoot bridge cameras with full HD video modes rather than camcorders - they seem to cover more realistically the range of things I want to do.
    My main question is regarding shooting at higher frame rates than 30 fps. I'd like to shoot video at a minimum of 60 fps (or higher) to then playback at 25 fps to get that smooth, slightly dreamy motion effect. There are a few cameras out there that offer high speed video modes, but most are nothing more than a gimmick because the res is so low that the resulting video is unusable.  However a few cameras now seem to hit a sweet spot, offering 60 fps recording at HD res, and also 120 fps at 640x480 which (at a pinch) is usable, at least for stuff destined for simple web use.
    The cameras I've narrowed it down to so far seem to be the Nikon Coolpix P500, the Panasonic Lumix DMC-FZ40 and possibly the Fujifilm HS20 EXR.  I also was vaguely interested in the Casio Exilim HS cameras, but they seem to only offer high speed video modes that are pointless - 1000 fps at a completely useless low res, and 120 fps only at 640x480.  The others I listed seem to offer at least 60 fps at some kind of HD res, so I'm assuming that with these cameras I could shoot decent looking video which would then play back with that slightly hyper real slow-mo effect when I import into FCP at 25 fps.  Is this correct?  Or is it the case that when they say HD video @ 60fps, it's some kind of interlaced mode which means you can't play back at a slower frame rate to get smooth slow motion?
    The other thing I've noted is that all of these cameras do record HD video, but it's always compressed in H264 format.  I understand that this puts a serious limitation on how much post-processing you can do to the video afterwards.  Highly compressed video will begin to show image artefacts very quickly when you apply effects as opposed to higher quality (bigger file size) video compression.  But I think I can live with that given that for the stuff I want to make, it will just be simply edited and only lightly graded.  However, of the cameras I'm looking at, the Lumix also records in a format called AVCHD which (I think) does full HD at 17 Mbps.  Does this mean that it's basic video quality is significantly better than the other choices?  That said, from the specs it's unclear if it actually allows shooting at higher frame rates which you can slow down at playback.. the way it describes 60fps mode makes it sound like it's just interlacing so you don't actually get a higher number of images per second to then be able to play back at a lower frame rate.  This for me might rule it out because I really want the creative effect of high speed video, even if it's only the subtle effect of 60 fps slowed down to 25.
    So in summary, I'm looking for a camera capable of creative shooting (high quality stills to make stop motion videos, usable-quality HD video along with at least some degree of high speed video at a resolution that is still usable) to make interesting and artistic footage to accompany music.  The destination medium is the web, so even though I'd like to get the best quality raw material to work with, the final destination is not exactly a cinema screen.  As a pro in a related industry, I'm all too aware of the pointlessness of buying outlandishly over-specced gear that is far beyond your level of expertise.  So I want to keep it simple and realistic, budget-wise, given the level I'm at.  Nothing more than say $800 US.  A seriously high end camera would be wasted on me, and I think it would be wiser to invest in useful accessories like a steadicam merlin and decent tripod rather than blow loads of cash on a camera far beyond my skill level.
    Apologies for the long post, any and all advice would be very welcome and appreciated!  And feel free to correct me if my assumptions are wrong, and suggest any gear that I should consider looking at.

    Hi, thanks for your input.  I'm aware of the fact that my question is a bit OT, but I'm just looking for input from people with more experience and broader information in this area than I have myself.. I know people are here to talk about FCP, but I'm betting many editors and film makers who work with FCP will have more insight in this area than I do.
    I've been reading every review I can find at dpreview, and also am watching as many test video examples I can find on the internet, mostly on vimeo because the ones on youtube look pretty awful.  I just am reaching out to get some actual experience and advice from people who might give me pointers on what to look out for.
    As for 60fps not being fast enough, I know what you're saying.  But for me, even 60 fps slowed down to 25 fps on playback is enough of an interesting effect, as long as the actual quality of the footage looks good to start off with.  I like the subtle effect of slightly slower than real motion when it's real, bona-fide high frame rate slowed down.  Artificially created slow-mo using plug ins looks cheesy to me, and the gimmicky super high frame rates of cameras like the casio exilim (where the resolution looks like a mobile phone video from ten years ago) are completely useless.
    I've seen lots of examples on vimeo of stuff shot with DSLRs from Canon and Nikon at 60fps and then played back at 25 or 24, and it looks plenty nice enough for what I'm after.  But am I kidding myself that I'd get anything near as nice with the price range I'm looking at?

  • My MacBook Air 2nd h 2011 running Mac OS X ver 10.7.5, camera disappeared. FaceTime. Photo Booth, iChat, Skype can't find it. It isnt in System Report, in USB High-Speed tree. I've browsed discussions found no solution.Pls help me

    My MacBook Air 2nd h 2011 running Mac OS X ver 10.7.5, camera disappeared. FaceTime. Photo Booth, iChat, Skype can't find it. It isnt in System Report, in USB High-Speed tree. I've browsed discussions found no solution.Pls help me

    JLeme wrote: ... camera ... isnt in System Report, in USB High-Speed tree...
    If you have tried every relevant suggestion from How to Troubleshoot iSight but your camera is still not recognized anywhere in your System Profiler's USB Device Tree, you likely have a hardware problem.
    Properly applying the Combo version of the latest update for your Mac OS can sometimes correct software problems, but, if your trouble is caused by a hardware problem, there are no user serviceable parts of the camera.  For hardware help, contact Apple or an Apple-Authorized Service Provider for service on your MacBook Air.

  • Help! Trying to record/render high speed movies (1/1000fps). Can I do this?

    I am trying to make high speed movies of the twitches. My camera can do up to 1/10000 fps analog but I cannot change the raw video fps. I believe it is 29.97, because of this each frame has 2 or more captures on it. No good! Can anyone help.

    What camera is this? How is it recording the footage?
    I had footage from a camera that shot at 2000fps to a hard drive..a high speed computer camera. That raw footage wan't something I could use in FCP, as it was some proprietary format. They needed to export it from their system as a Quicktime movie...Animation codec. And it being a computer camera, it captured with computer monitor dimensions, 800x600. So I had some resizing to do.
    How does your camera work?
    Shane

  • Nikon D2x and High Speed Crop

    Just an interesting observation....
    With Aperture and Tiger, Nikon D2x images shot with the smaller MP High Speed Crop (HSC) mode displayed 24 extra columns/rows (depending on orientation) of pixels; thus an image that should be 3216x2136 showed up in Aperture as 3240x2136. The extra pixels included several rows/columns of garish purple and green pixels than needed to be cropped. This is fine for one image, but not suitable for several hundred (such as shot at a sporting event). In addition to the lack of support for .xmp import, this is one of the most frustrating things about Aperture (for me at least).
    With Tiger this could be traced back (I'm guessing) to Core Image in the OS because other apps using it (such as Preview) displayed similar results. I was hoping for better results with Leopard and was disappointed to find the similar side effect. But I just checked and Preview, iPhoto, etc. no longer show these extra pixels in Leopard, only Aperture. My hope is that Apple will address this in an Aperture update in the near future (perhaps a RAW Fine Tuning 1.2 option).

    I doubt that it's the camera, as the issue doesn't arise on exported pics. That said, as there are only two posts on the forums (yours and the one you refer to on the Aperture forum) it's possible that a: this only arises in very limited circumstances or b: it's local to your computer rather than a bug proper.
    Create a new account (systempreferences -> accounts) and make a library there. Import a few pics and see if the problem is repeated there.
    Regards
    TD

  • Changed from dial up to high speed

    The area I live in finally has high speed (wireless), so I have a new ISP and broadband connection. Also Internet Exlporer was acting up so I now am using Firefox.
    If I put in a new cd to download to my ipod (5th gen.) I get...unable to connect to the CDDB server. Network connection timed out. I called my ISP and all is ok. also can't buy any tunes. In frustration I've downloaded itunes again with my new user name. This page had my old user name. I've flushed the DNS settings in widows. I've spent hours yesterday trying to get this, which must be a simple thing, to work and came within an eyelash of putting my fist through the monitor!
    I tried calling the help line with it's push 1 for this and 3 for that and on and on, what a joke, got nowhere.
    Does anyone know it this is firefox, or something not set correctly, and how to set it, or what the heck is the problem?

    Is this the error?
    Disk cannot be read from or written to error syncing iPod in iTunes.

  • Unable to activate my high speed internet account with a mac os 10.5

    I have a big problem with the activation of my line. I have subscribed to high speed internet.
    The agent came to my house to install the jack but when I'm trying to run the installation on my computer with the cd or directly with internet it's stops when smart acces opens (I have a Mac OS X 10.5). Could somebody help me ? Thanks

    In almost all cases, internet is "plug and play" on newer computers.
    If you need to install filters, they need to go between the phone and the jack for every phone you have on the same line as the DSL. The modem does not get a filter.
    If you need to set up your username and password, you will need to log in with your default Verizon-assigned id. If you were not given this, then contact tech support and ask for your "vzid" and have them reset your password. You should then be able to log into verizon.net and click on the My Account page. On the My Account page, you can set your username, create sub accounts, manage your billing, add an alias to your account, etc.
    Does that cover what you needed, or is there something more?
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
    "All knowledge is worth having."

  • Late 2014 iMac 5K running unusually slowly with fans running at high speed

    Problem description:
    iMac 5K
    The computer is running unusually slowly although it is not experiencing high CPU utilization.
    The computer's fans run at high speed although the computer is not experiencing heavy usage.
    Apple Diagnostics points to SMC problem.
    SMC and PRAM resets have not worked.
    See Etre Report below.
    Thanks for help.
    Herbie49
    EtreCheck version: 2.1.8 (121)
    Report generated 30. März 2015 07:32:40 MESZ
    Download EtreCheck from http://etresoft.com/etrecheck
    Hardware Information: ℹ️
        iMac (Retina 5K, 27-inch, Late 2014) (Technical Specifications)
        iMac - model: iMac15,1
        1 4 GHz Intel Core i7 CPU: 4-core
        32 GB RAM Upgradeable
            BANK 0/DIMM0
                8 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                8 GB DDR3 1600 MHz ok
            BANK 0/DIMM1
                8 GB DDR3 1600 MHz ok
            BANK 1/DIMM1
                8 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en1: 802.11 a/b/g/n/ac
    Video Information: ℹ️
        AMD Radeon R9 M295X - VRAM: 4096 MB
            iMac spdisplays_5120x2880Retina
    System Software: ℹ️
        OS X 10.10.2 (14C1514) - Time since boot: 0:31:53
    Disk Information: ℹ️
        APPLE SSD SM0512F disk1 : (500,28 GB)
            EFI (disk1s1) <not mounted> : 210 MB
            Macintosh SSHD (disk1s2) / : 499.42 GB (251.32 GB free)
            Recovery HD (disk1s3) <not mounted>  [Recovery]: 650 MB
        Samsung SSD 840 EVO 750GB disk0 : (750,16 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Herbies Daten (disk0s2) /Volumes/Herbies Daten : 749.30 GB (299.14 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple, Inc. Keyboard Hub
            Apple Inc. Apple Keyboard
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Anywhere
    Kernel Extensions: ℹ️
            /Applications/Toast 11 Titanium/Spin Doctor.app
        [not loaded]    com.hzsystems.terminus.driver (4) [Click for support]
            /Library/Application Support/Symantec/AntiVirus
        [not loaded]    com.symantec.kext.SymAPComm (11.1.2f18) [Click for support]
            /System/Library/Extensions
        [not loaded]    com.Logitech.Control Center.HID Driver (2.4.0) [Click for support]
        [not loaded]    com.symantec.kext.internetSecurity (1.3.2f5) [Click for support]
        [not loaded]    com.symantec.kext.ips (3.2f8) [Click for support]
            /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
        [not loaded]    com.roxio.TDIXController (2.0) [Click for support]
    Startup Items: ℹ️
        ProTec6b: Path: /Library/StartupItems/ProTec6b
        Startup items are obsolete in OS X Yosemite
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.CS5ServiceManager.plist [Click for support]
        [running]    com.symantec.uiagent.application.plist [Click for support]
        [not loaded]    com.teamviewer.teamviewer.plist [Click for support]
        [not loaded]    com.teamviewer.teamviewer_desktop.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.bombich.ccc.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.symantec.avscandaemon.plist [Click for support]
        [running]    com.symantec.diskMountNotify.plist [Click for support]
        [failed]    com.symantec.MissedTasks.plist [Click for support]
        [loaded]    com.symantec.navapd.plist [Click for support]
        [loaded]    com.symantec.navapdaemonsl.plist [Click for support]
        [loaded]    com.symantec.Sched503-1.plist [Click for support]
        [loaded]    com.symantec.Sched505-3.plist [Click for support]
        [running]    com.symantec.sharedsettings.plist [Click for support]
        [running]    com.symantec.symdaemon.plist [Click for support]
        [failed]    com.symantec.symSchedDaemon.plist [Click for support]
        [not loaded]    com.teamviewer.teamviewer_service.plist [Click for support]
        [loaded]    de.meilenstein.MSTFirstRunInstaller.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [failed]    com.adobe.ARM.[...].plist [Click for support] [Click for details]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [loaded]    de.starface.STARFACE-Client.plist [Click for support]
        [running]    ws.agile.1PasswordAgent.plist [Click for support]
    User Login Items: ℹ️
        Notizzettel    Programm Hidden (/Applications/Stickies.app)
        Adobe Reader    Programm  (/Applications/Adobe Reader.app)
        Dropbox    Programm  (/Applications/Dropbox.app)
        SpyderUtility    Programm  (/Applications/Datacolor/Spyder4Pro/Support/SpyderUtility.app)
        PopChar    Programm  (/Applications/PopChar.app)
        STARFACE Client    Programm  (/Users/[redacted]/Desktop/STARFACE Client.app)
    Internet Plug-ins: ℹ️
        Google Earth Web Plug-in: Version: 7.0 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
        Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 [Click for support]
        OfficeLiveBrowserPlugin: Version: 12.2.8 [Click for support]
        AdobePDFViewerNPAPI: Version: 10.1.5 [Click for support]
        FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
        Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        iPhotoPhotocast: Version: 7.0
        SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 10.1.5 [Click for support]
        JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    User internet Plug-ins: ℹ️
        RealPlayer Plugin: Version: Unknown
    Safari Extensions: ℹ️
        1Password
        ExifExt
    Audio Plug-ins: ℹ️
        DVCPROHDAudio: Version: 1.2
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Flip4Mac WMV  [Click for support]
        Growl  [Click for support]
        Norton\nQuickMenu  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: YES
        Volumes being backed up:
            Macintosh SSHD: Disk size: 499.42 GB Disk used: 248.10 GB
        Destinations:
            Backups [Network]
            Total size: 6.00 TB
            Total number of backups: 39
            Oldest backup: 2015-01-31 05:27:48 +0000
            Last backup: 2015-03-27 20:28:54 +0000
            Size of backup disk: Excellent
                Backup size 6.00 TB > (Disk size 499.42 GB X 3)
    Top Processes by CPU: ℹ️
             5%    WindowServer
             0%    Dropbox
             0%    SymDaemon
    Top Processes by Memory: ℹ️
        241 MB    Mail
        206 MB    Finder
        172 MB    Safari
        137 MB    Stickies
        137 MB    WindowServer
    Virtual Memory Information: ℹ️
        29.20 GB    Free RAM
        2.79 GB    Active RAM
        721 MB    Inactive RAM
        1.64 GB    Wired RAM
        1.34 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Mar 30, 2015, 06:58:02 AM    /Library/Logs/DiagnosticReports/deleted_2015-03-30-065802_[redacted].crash
        Mar 30, 2015, 06:55:24 AM    Self test - passed

    First uninstall your antivirus. Use only a vendor-provided uninstaller or uninstallation instructions. Never remove files by hand. Never use an "app zapper".
    If that doesn't fix it, take it back to Apple for service.

Maybe you are looking for