*High Speed Enhanced - DSL Light keeps going off and on, Losing Internet *

Issues
My DSL light starts flickering and then my internet light goes off. The DSL then comes back on but internet does not reconnect. This happens 3-4 times each hour.
My max download speed is capped at 3MB even though Im available to have 5mb
This has only happened recently i was able to get consistent 5.8 MB download for 9 months.  
I've had 2 technicians come in to check my line speed and it both clocked in at 3 MB download. They thought my line i was on was over capacity so they asked them to switch my port. But still seeing the same issue.
Im out of options here, I have a 3rd technician scheduled but im not confident this is going to get fixed. I guess last resort is for them to check the physical line to see if there is something wrong from central office to my residence?I  have to constantly turn off and turn back on the router to get the internet to come back on. This is incredibly frustrating when Im working.  Any suggestions here?
This has been going on for the past month and no end in sight.
Any help is appreciated.
Download speed various from 1.5 to 3.1 everytime the DSL light goes out the Down and Up changes.
Transceiver Statistics
Transceiver Revision
A2pB020b3.d20h
Vendor ID Code
4D54
Line Mode
ADSL_re-adsl
Data Path
FAST
Transceiver Information
Down Stream Path
Up Stream Path
DSL Speed (Kbits/Sec)
2828
696
Margin (dB)
6.9
6.6
Line Attenuation (dB)
38.0
19.8
Transmit Power (dBm)
0.0
8.4

Your noise levels are terrible, something is going on with the line. Your downstream and upstream speeds are not even at max bitrate. For a 3Mbps line, which is the least you should be running on a range extender card, you should be at 3360/864. If the DSL drops out you'll have to reset the modem to get the Internet light back on, either that or logging into 192.168.1.1 and manually reconnecting the line. Bottom line you have an issue with the line, call Verizon and get a service tech out ASAP.

Similar Messages

  • While watching a live program my voice keeps going off and on

    while watching a live program, like the news, the sound keeps going off and on sometimes takes a long time to come back on?
    I have checked my connections and they are secure so I would appreciate a little help with this, I am not a very smart computer person so have patience please.

    Make sure the manual of the monitor says it supports the frequencies you are choosing.
    Make sure the amp in use by all devices plugged in does not exceed the amps your circuitbreaker/fuse supports in that portion of the house.

  • My 1st generation Time Capsule/2007 keeps shutting off and disconnecting from internet?  What could be the problem?  How long do the Time Capsules usually last?

    My 1st generation Time Capsule/2007 keeps shutting off and disconnecting from internet?  What could be the problem?  How long do the Time Capsules usually last?

    That it is still working is miraclous.. most have died.. lots started flaking out at 18months to 2years..
    See deadtimecapsule.org
    The few that remained now seem to have reached EOL.. you can repair if you have some skills.. fairly cheaply.
    But it is well and truly time to replace.
    https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair

  • C309A keeps going off- and on-line over and over again

    I have a new C309A configured to print wirelessly.  Everything installed correctly during setup and all network tests are successful. It worked for a few days but now I can't print since the printer looks to be going offline and then on again constantly (I can actually watch it change status over and over again if the printers folder...).  If I manage to catch it when the printer is showing online I can print, so I know that my computer will talk with the printer.  And I have another computer that prints wirelessly just fine.
    I've tried tech support via chat and phone - big waste of time since they obviously have no technical knowledge and are just reading scripts. 
    I was told by one support contact that there is a fixpack, but it was for another model  (4580 I believe).  He indicated it would work on the C309A as well.  HOWEVER when I downloaded it it of course would not install since I don't have that printer.  I tried all product matches for 4580 (he said he picked the wrong one the first time so I tried again and again.  Each time was just picking the wrong one apparently.  Or could it be that he had no idea what he was talking about?) and none of them would work.  There are no fixpacks for the C309A.
    I've seen in other threads that this could be a firewall issue but I'm not so sure.  I've tried disabling mine and still had the issue. 
    I'm running windows XP professional.  my firewall is symantec.  and my printer is currently a very large and expensive paperweight.
    Anyone have any ideas???????? 
    This question was solved.
    View Solution.

    When the printer goes offline, see if you can open the printer's internal web page by browsing to its IP address.
    If you can, then we know communications between the PC and printer are working and that the offline messages are false positive indicators.
    Next, I'd like to try a manual installation of the printer queue.  Here's the sequence for Vista:
    Click >> Start >> Control panel >> Printer.
    Click the 'Add Printer' icon.  The 'Add Printer' dialog box opens.
    Click 'Next' button on the 'Welcome to the Add Printer' Wizard dialog box.
    Select 'Local printer' in the Local or Network Printer dialog box.
    Under Select a Printer Port option, select "Create a new port" and select "Standard TCP/IP Port" and click "Next" button.
    In the "Welcome to the Add Standard TCP/IP printer port wizard" make sure that the printer is turned on.  Click "Next" button.
    Under "Add Standard TCP/IP Printer Port" enter the printer's host name that is printed from the printer's netwotrk configuration page.
    Now, select HP (not Hewlett-Packard) from the list of manufacturers, select Photosmart C309 from the list of Printer models and click 'Next' button.
    The Printer name will be highlighted on the next window.  Click 'Next' button.
    It will ask for the Printer name -- leave the default value.
    Click 'Yes' for making the printer default.  Click 'Next' button.
    The Print Test Page box appears.
    Select 'Yes' to print a test page.
    Click 'Finish' button to complete the installation. 
    It should print a test page.
    BTW -- what kind of wireless-router do you have?  Also, press and release the <setup> and <#> keys.  This will print an internal connectivity diagnostic report.  Scan and email me the report to my work email:  wireless at hp dot com.
    Regards / Jim B / Wireless Enthusiasts
    ( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
    + Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

  • My light keeps going off on my iphone so i can not see the screen

    can u help with my light going off

    I believe the keys on an imac are F11 and F12, for dark / bright respectively.
    Try that, I think it'll work.
    If not, then try out all the "F" keys, one of them will work.
    Ben

  • Backlight keeps going off and I don't know why

    Every time I tilt my screen back, it goes black but my computer is still on. I have to have it probably at around 45 degrees just to have my screen working which is a pain.
    It looks just like this:
    http://www.youtube.com/watch?v=n8SxETWCRH8
    Does anyone know why is it doing this and how I can fix it? Also, how much does it cost to get it fixed? Thank so much

    Contact Apple or an authorized repair center for repair and it's cost. Nobody here would know.

  • Sound keeps going off, and "dock connector" appears in the volume window.What can I do?

    Every time I try to use the Ipad, the music stops, and the words "dock connector" appear in the volume window. The it stops.Pandora, or the ipod. Doesnt matter

    Try resetting your iPad. Hold Power + Home until the Apple logo appears.

  • IPhone text noise keeps going off

    On my iPhone 4, the text sound keeps going off and the screen doesn't light up. When I check my phone, I have text message, alert, notification, etc. please help. Is there something wrong with my phone?

    Here's the answer:
    https://discussions.apple.com/thread/3394354?start=0&tstart=0

  • My audio streams through my Apple TV keep going on and off.  This is new.  How do I fix it?

    My audio streams on Apple TV keep going off and on.  Sometimes they stay off.  This is new.  How do I fix it?

    Hi, geoff1949.
    I found a couple of resources to help troubleshoot the issue you are experiencing. 
    Apple TV (2nd and 3rd generation): Troubleshooting playback performance
    http://support.apple.com/kb/ts3623
    Apple TV: Basic troubleshooting
    http://support.apple.com/kb/ht1551
    Cheers,
    Jason H. 

  • Macbook 13.3 white, the screen goes off and only comes on when screen moved

    Hi.
    I have the macbook 13.3 in white, early 2009 model. The screen keeps going off and the only way I can get it back on is to move the screen back and forth. By the looks of things this is a common problem and it's usually related to a cable between the screen and the logic board.
    My question is, how easy is it to open the mac up and get to this cable to re-connect it properly?
    Or do Apple repair this FOC due to it being a popular problem?
    Thanks
    Mark

    My girlfriend has a white macbook that is just over the year warranty.  We were going to get the Apple care, but forgot as we got the computer at Best Buy and didn't expect to have problems.  I've always previously been a PC guy and had never had problems with my Dells. They all still run and work perfectly but are just obsolete in many ways.
    I'm very disappointed with the Macbook.  The screen freezes and fades to white and you have to move the screen to get it to work.  The computer is still running fine, it just seems like a connection to the screen that is the problem.  I brought it to the "genius bar" and they went down and opened up the computer.  When I got it back they advised it might be the cable for the screen or the screen itself.  He went on to say Apple will not just fix that problem, the only option is to have Apple do a $470 (I believe that's what I was quoted) warrantied overhaul of the entire machine.  They don't just fix the problem, they go through the whole machine for $470 and its warrantied.  He said a computer repair shop could probably fix the problem cheaper.  My problem is that this was a fairly expensive machine that is barely over a year old and its having a problem that it seems many people are having and their only solution is to spend half the money of a new one to fix something as small as a cable that is definitely their fault.  I do not think the screen needs to be replaced or the logic board as when you pinch the screen and angle it, it works amazingly.  I opened up the machine just to take a look and it seems that the cable for the video goes through the hinge and there is a pleat inside the hinge shaped to contour the outside of the machine when closed that tugs on the cable slightly.  I also saw that there was some missing screws that the "Genius Bar" may not have put back.  They told me they unplugged and inspected the video cable and the computer worked better for a while which leads me even more to believe there is something wrong with the cable and the hinge design.
    I think Apple should fix this problem.  This problem that is becoming more and more common and it is definitely a product defect.  We are paying a decent dollar for these products compared with PC laptops out there.  I'd like to see some decent service.  This is not a $470 "one fix fits all" problem for the customer, this is an easy fix for the company to make on faulty products.  It will cost them little and its the right thing to do.  I predict more and more people will be complaining about this problem in the coming year.  They should not be able to profit on this flaw after so recently profiting on the machines.
    -JC

  • The lights under my keys keep going on and off far too often ... Is there any particular reason for this or should I take it in for a service or what?

    The lights under the keys keep going on and off too much for my liking is there a particular reason for this or is there a problem with it ?

    System Preferences > Keyboard > Keyboard
    Turn off when computer is not  used for:
    Increase the time interval.

  • Apple TV won't load up. the light flashes and the logo appears on the TV then it just goes off and starts again. I've tried restoring via USB on 5 different computers and I keep getting error message 9? Can anyone please help?

    I have a black Apple TV that has recently stopped working. It loads the Apple Logo on screen then goes off and starts again. It's as if it is stuck in a loop. I've tried a re-boot and this has failed. I have tried a restore using a USB cable on 5 different computers, including a Mac Book Pro and it downloads the update file but when it tries to restore I get the error code 9 showing on screen. I just can't get it to do anything.
    Can anyone please help?

    Thanks for that information!
    I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
    In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
    When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
    Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

  • How can you watch itunes purchased movies on apple tv. A click on to movies then into purchase thn a click on a movie i want to watch then my apple tv box light starts going on and off plus the screen is blank

    How can you watch itunes purchased movies on apple tv. A click on to movies then into purchase thn a click on a movie i want to watch then my apple tv box light starts going on and off plus the screen is blank

    JasonFromSK wrote:
    With the newest Airport firmware (7.6.1), it seems I should be able to do this.
    Really? I need to check that out!
    You should certainly be able to add content by reference to itunes from such a disk (even before the update) - so long as itunes knows the location of the file (set Preferences not to copy to local library when adding the media) it will stream it to AppleTV if the disk is available.
    I hope you're right, but I'd be surprised if current Extremes can be upgarded to provide a full Home Sharing service - marvellous if they can but I'd be surprised as i've long said we need an Apple media server either based on TC or AE to do this kind of thing.
    AC

  • The wifi on my  iPod keeps keeps going off. I am going to settings but it is not allowing me to click onto my own home hub? Really frustrating

    The wifi on my iPod keeps going off. I go to settings, turn wifi back on and click on my home hub in choose a network zilch!!! message pops up 'Unable to join the network'!! Can anybody please suggest a solution. I am not really a tech type but if given clear instruction I may be able to solve this menace. Thanks

    Try:                  
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • As soon as I keep the iPhone (iPhone 5) on the desk the network goes off and when I swipe it then only it starts searching for the network and get it in 30 seconds.  If someone is calling me during that time it says mobile is either switched off or outsid

    As soon as I keep the iPhone (iPhone 5) on the desk the network goes off and when I swipe it then only it starts searching for the network and get it in 30 seconds.
    If someone is calling me during that time it says mobile is either switched off or outside the coverage area.
    Please help

    You may need to force it into recovery mode. See here: https://discussions.apple.com/message/17766427#17766427

Maybe you are looking for

  • Upload/download excel from BSP

    Hi all I am new to BSP's and and need to investigate the following: Is it possible to create an excel file, manipulate certain cells (e.g. read only, format colours etc.) then export the file to a supplier via the portal. Then read the file and updat

  • Assigning search help (F4 functionality ) for recipient field in IW32

    Hi, my requirement is to assign search help (F4 functionality) for recipient field in components tab of IW32. anybody help me to assign search help for it. same way i need to assign that in MIGO, MB21, MB1A goods recipient field.

  • SOAP Runtime: Exception message: Unallowed RFC-XML Tag (SOAP_EINVALDOC)

    Hi, Curretly I am trying to test a Webservice on ECC 5.0, Oracle, Windows. Below is the error that I am facing. SOAP Runtime: SOAP Runtime exception: 111 occurred in method XP_READ_TAG of class CL_SOAP_XP at position 1 SOAP Runtime: Exception message

  • Condition Record maintenance Doubt

    Dear SD collegures,     when i maintain a basic price condition record for example Pr00 i maintained material 'A' is costing 100. then Today i changed the value to 98 and 100 rupees validity is changed to yesterday. then i give new price 98 is valid

  • Can the current subject area be determined?

    obiee 11G I would like to create a session variable that contains the users current subject area. Does anyone know if that is possible?