High temp on cpu 2

i get 48 c on cpu 2 and 35 on cpu 1 on my k7d. What's going on 8o ??iis it a bug ? is bios update useful (i have the 1.3) ?
thx

First of all, its usually best to give some information first. What processor types are you using, where you are getting the temp readings, etc.
As a general heading, I would check to see what temp the BIOS is reading to confirm (if thats not where you are getting them). If you are using AthlonXP's then those temps are both survivable. Try putting them under load and see what you get.
Also, if you have the desire and ability, check out your heatsinks to be sure they are properly mounted. Now that I think of it, your readings may not be the same in theory. On a multiprocessor system the work is not divided evenly, but allocated as necessary. You may very well have different readings on each processor according to how much work each one is doing. Yeah, a 13 degree celsius difference sounds a bit far, but its possible. How is your airflow in your case? Is one CPU in a more isolated area?
Just things to think about.

Similar Messages

High Temps low CPU usage.

I bought a  HP ENVY TouchSmart 15-j063cl Notebook PC (ENERGY STAR) last November and have been experiencing high temps and loud fans at very little CPU usage or strain. When I am streaming video often times I will hear the fan speed up every once and awhile and the TZ00 will be at about 60 degrees Celsius. I recently tested the system by playing Arma 3 on minimum graphics with shadows disabled and within a minute of playtime the fan was blaring and the TZ00 was at just under 80 degrees Celsius. I did this test with the laptop elevated on a metal stand leaving the main exhaust completely clear and the majority of the bottom also clear. During the test the CPU usage was at about 20% maxing at 30% and I was getting about 35 FPS.
(While I was typing this TZ00 was above 50 degrees celsuis)-10minutes after closing arma
What's the problem guys?
System Specs
Spoiler (Highlight to read)
System    Manufacturer Hewlett-Packard Model HP ENVY TS 15 Notebook PC Total amount of system memory 12.0 GB RAM System type 64-bit operating system Number of processor cores 4 Storage    Total size of hard disk(s) 931 GB Disk partition (C 807 GB Free (905 GB Total) Disk partition (D 3 GB Free (26 GB Total) Graphics    Display adapter type Intel(R) HD Graphics 4600 Total available graphics memory 1792 MB       Dedicated graphics memory 0 MB       Dedicated system memory 0 MB       Shared system memory 1792 MB Display adapter driver version 9.18.10.3071 Primary monitor resolution 1920x1080 DirectX version DirectX 11 or better Network    Network Adapter Realtek PCIe GBE Family Controller Network Adapter Bluetooth Device (Personal Area Network) Network Adapter Broadcom BCM4352HMB 802.11ac 2x2 Wi-Fi Adapter Network Adapter Microsoft Wi-Fi Direct Virtual Adapter Notes    The gaming graphics score is based on the primary graphics adapter. If this system has linked or multiple graphics adapters, some software applications may see additional performance benefits.
System    Manufacturer Hewlett-Packard Model HP ENVY TS 15 Notebook PC Total amount of system memory 12.0 GB RAM System type 64-bit operating system Number of processor cores 4 Storage    Total size of hard disk(s) 931 GB Disk partition (C 807 GB Free (905 GB Total) Disk partition (D 3 GB Free (26 GB Total) Graphics    Display adapter type Intel(R) HD Graphics 4600 Total available graphics memory 1792 MB       Dedicated graphics memory 0 MB       Dedicated system memory 0 MB       Shared system memory 1792 MB Display adapter driver version 9.18.10.3071 Primary monitor resolution 1920x1080 DirectX version DirectX 11 or better Network    Network Adapter Realtek PCIe GBE Family Controller Network Adapter Bluetooth Device (Personal Area Network) Network Adapter Broadcom BCM4352HMB 802.11ac 2x2 Wi-Fi Adapter Network Adapter Microsoft Wi-Fi Direct Virtual Adapter Notes    The gaming graphics score is based on the primary graphics adapter. If this system has linked or multiple graphics adapters, some software applications may see additional performance benefits.
Ended the test to prevent damage.
Here is the HWmonitor information saved about two minutes after the test.
Spoiler (Highlight to read)
N/A Exceeds 50,000 Character rule
N/A Exceeds 50,000 Character rule

I might sound weird but sometimes CPU runs hot in a loop. If you check in Task manager, it peaks at 3.2 GHz and won't come down. This situation is because of bios problems and HP won't confirm this problems as it is their way. I solved by reducing the processor maximum power to 80% in power options. From then, CPU wont peak itself as there is a limit and won't stay in the loop. Hot air coming from left vent is solved.
But if the chasi is becoming hot while air from vents is less hot than metal chasi, then I think its CPU fan problem. I prefer you to clean the vents by disassembling the laptop though nearest HP service or local service guy. Just clean the CPU fan and coolant pipes running around the CPU and GPU. Im not an HP expert but I found these are the issues for over-heating. Remember 60 degree is considered normal temp for i7-4700 processor. But, if you feel its hotter then check it once. Don't hesitate.

MSI GT683 DXR CPU high temps

Hello,
I have this wounderful gaming laptop for 2 months but I have some problem with CPU. Few days ago I was plaing BFH and suddenly my computer started to low GPU usage and shuted off like u will hold shut down button. When I started again I hadn't screen about wrong shuting down(safe mode etc.). Now when I play BFH my CPU temp, like ThrottleStop, OCCT, CPUID Hardware Monitor shows, comes up to 97 degree, 80-85 awerage. When it comes to 90 Cooler starts to work on his highs to lower temp to 80-85 than again works normally. When I start on Cooler Boost technology CPU temp is about 70. My question: are these temp good or to high. I think this is gaming laptop and it shouldn't have any problems with BFH. Should I turn on all the time Cooler Boost ?
Of course when it comes to high temp I notice performance decrease. Normally I have 100 FPS but it lowers to 70 or even to 35.
Sorry for my English
Cheers Barbatian

No overclock! Don't be too surprised by the fact that 1333 is less than 1600. So what you should do is set the memory speed down. Down to something your AMD processor likes. Strictly speaking, running at 1600 should only be done after a heavy processor overclock.
Talk to "viper" about it: https://forum-en.msi.com/index.php?topic=152798.0
So, please set memory to run at 1333 to gain stability and fix your temp. issue.

Very high temp, but no problems at all!!!

Ok I got this k7n2-l last month. When I installed it with my 1800 xp, the temps would hover about 60 to 75 c. So I went and bought a new cpu cooler( therm vol 7) adn applied some artic silver 2. no change in temps. this cpu ran like 30 to 40c in my old k7s5a board with retail cpu fan. So I went and bought a xp 2200. and had them install it pro installed with retail cpu fan and thermal pad. now my temp hover between 70 and 100 c. the funny thing is I have never had a crash or any system problems what so ever. And I play counter-strike everyday. I ordered a ther volc 9 with some artic silver 3. But doesnt this seem weird. that I get these high temps and my system is very stable. I even oc'd the 2200 to a 2400 and get the same temp readings. I think the temp is wrong. Oh and I'm reading it from the bios and pc alert 4. what do you guys think?

With a Duron 800 and a Thermalright SK-5 and a 60 MM fan blowing about 12 CFM i was sitting around 120 F. I installed a Valcano 9 and the temp whent up to 131 F. I thougth i installed it wrong so i took it off, cleaned it and re aplied some Arctic Alumnia and the temp was stilla round 130 F. I took it off, put the SK-5 back on and it dropped to around 124 F. I took the 80 MM fan off the Valcano 9 and placed it on the SK-5. The temp whent down to around 118 F. Needless to say the Valcano 9 heatsink is a peice of . Or my first generation old ass SK-5 is badder asser. But i dought that seeing the I was getting the same temps with a $8 CoolerMaster.
Now with my Athlon 1700+ @ 195x10 I hover around 127 - 131 F with the Thermaltake fan from the Valcano 9 at its lowest setting, compleatly silent, spinning about 2500 RPM's.
I attached the sensor from the Valcano 9 to the bottem of the Proc whith some thermal tape. With a little re-wiring i ran it into my Vantec NXP 201. What ever it reports is usally around 3 - 5 C lower then the Bios. Usually around 48 C. I thought the Bios temps where way off. But now lookign at it i'm not so sure they are. If the temp in the Bios is being taken fromthe core of the Proc and the temp on the Vantec Nesus is being taken from the bottom of the proc, and theres only a free degrees difrence, i'm not sure the Bios is wrong.
This is on an ILSR BTW..

N660TI 2GB PE/OC - increased temp after cpu upgrade

so its like this, i recently upgraded my cpu from an old 3-core Athlon II to an i5-4690k, and i find that my gpu is running much warmer than it has as long as ive owned it, both in terms of peak temp and average load temp. ive had to adjust the fan profile to keep it cool, which of course makes much more noise. ive also noticed that the outboard fan (closest to the bracket&video out connectors, doesnt even spin unless the fan is set to 86%, which undoubtedly conttributes to the heat problem.
i DID take a can of compressed air to the heat sink and fans while i had my system apart installing the new cpu, but it still has a bit of dust on the underside of the fans that i cant get too, unless i take off the entire heatsink, which im not about to do. case has dustfilters on all the major intakes as well, so its not like suddenly it grew dust bunnies in the past 3 days
settings and such here: hxxp://imgur.com/a/ykjm8 (replace hxxp with http, duh)
i bought this 660ti the day they came out, so its about 2.5 years old or so. generally speaking, load temp was mid-50s C, or low 60s if its really hot. the absolute peak ive seen in all that time was 76, which is what the scale on the afterburner graph is set at. after installing the i5, load temps (guildwars 2 for sake of exmaple) are are mid-60s, and ive seen a peak of 78.
specific model again is teh msi N660TI power edition/over clock 2gb, (which i guess is one of those that had a voltage regulator bypass, according to tomshardware), gpu bios is stock, latest nvidia drivers 347.52 WHQL, msi afterburner 4.1.0, no overvolting, stock clocks (athlon couldnt keep up with overclocking anyway and it runs too warm to overclock now) graphs are shown under load with guildwars 2, high quality settings at 1920x1080 windowed, vsync@60fps, in characters home instance. the fan profile shown is after i bumped it up, high mark was around 70%/70c at the time.
droping the power level in afterburner to 57% helps the temp a bit, as does underclocking it as far as it'll go. i also have a 12cm fan i could install in my case's side panel, right next to the gpu, to draw air out (cause thats where the gpu exhausts at), i also have another 12cm fan installed at the bottom of the case blowing up towards the gpu roughly in line with the inboard gpu fan.
anything i can do about that one fan? i dont really want to have to run at 90% fan speed all the time to keep it cool (especially with summer comming up, no A/C here, gonna get hot as balls) or is it time to upgrade?

Hi,
I might be wrong here, as I don't know much about AMD CPUs, however I think that your old 3 core Athlon was bottlenecking the GPU which did not let it use its full power. Now with your i5 Haswell Refresh, it uses its full potential which cause slightly higher temps.
You could reapply thermal paste on the graphics card (done at your own risk) if you don't have warranty on it any longer. If you do, then contact MSI in your country and ask if you can do it (obviously if you damage something then warranty is void)
>>How to contact MSI.<<

Help on overclocking i7 860 on P55 Gd65 w/ high temp

I just recently resolved certain issues with my new build computer. So i now tried using OC Genie and cpu frequency overclocked to 3.41 GHZ with V core at 1.4 volts . I am already contended with that amount of increase however at 88% load the temp would reach 77 C at a room temperature 31 C. I guess that temp. is at a dangerous level so i turned off OC Genie. Then i tried to overlock it thru windows using the Control Center software provided by MSI. Under it i just went to Basic Overclocking wherein there are four (4) preset settings. I clicked on Game and the cpu overclocked to 3.116 GHZ and at 88% load the temp would reach as high as 68 C (room temp at 31 C). Temperatures were monitored thru the used of Real Temp.
I would want to reach at least 3.4 Ghz thru the use of OC Genie but those high temp made me reluctant to keep it at such speed. So at the moment i am just @ 3.1 Ghz and i am not even sure if at such speed or frequency that 68 C (88% load) is safe or not.
I changed my cpu cooler to a much larger one which is a Thermaltake Frio with 2 fans (push and pull configuration) and even reinstalled it but still no improvement.
I have read reviews wherein many where able to overclocked to as high as 3.8 Ghz and even 4 Ghz with this cpu cooler with no problems regarding temperature.
At first i thought of purchasing a Noctua NH DH14 but to my dismay that is not available here in the Philippines so i settled with Thermaltake Frio.
My case Cm Storm Sniper has enough fans but still the temp will still go that high if the cpu is overclocked to 3.4 Ghz.
I want a lower cpu temp so i can overclocked it a little bit higher.
Please help and thanks in advance.

Quote
I have yet to hear a feedback who have actually use Corsair H50.
https://forum-en.msi.com/index.php?topic=130308.0
Quote
With the use of an aircon at night the temp would reach at 56 C (88% load) at a mere 3.116 Ghz.
That's a significant 12°C drop compared to your other result @31°C:
Quote
I clicked on Game and the cpu overclocked to 3.116 GHZ and at 88% load the temp would reach as high as 68 C (room temp at 31 C).
In my opinion, this proves that the crucial factor in your case is the ambient temperature. And that means that the best way to get the system running cooler is to either keep the room temperature down or change the cooling method to something more effective @high ambient temperatures.

Help! Kernel_task using high percentage of CPU.

Hi guys,
I am using Macbook Pro with Retna. Recently my macbook started to slow down while making loud fan noise. I noticed that Kernel Task was using high percentage of CPU (aroung 600). This is not the first time. Last time I took it to apple store and got fix, but this time I can not do that because my warrenty expired.
I tried to fix it by formating the macbook, but it did not work.
Could anyone help me with this?!?

Do SMC reset. how u do it???????.... well connect the magsafe adapter to the mac, Shutdown the mac. Then Hold ctrl+opt+shift+power button for 6-8 sec. Leave all the keys and have a watch on the Magsafe, the amber should turn Green the moment u leave all the keys indicating a successfull Reset. Then unplug the magsafe wait fro 3 sec plug it again. Start the machine , still the issue is there then finally do a PRAM/NVRAM reset holding cmd+opt+p+r as u start the machine. Machine would chime Twicce on the 3rd chime leave all the keys. Even after this doesnot do good then battery reset is required for which u ll hav to take it to Apple service store.

How to get alert for app server that experienced high memory and CPU utiliz

Hi
How to get alerts configured and turned u201Conu201D for the app server that experienced high memory and CPU utilization?
And let me know where we can check this?
Regards,
Neni

hi,
Have you configured a Central Monitoring System (CEN)? This includes registering the agent on the CEN, starting it and configuring the Central Auto Reactions on CEN using RZ21 transaction.
[http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/05c80724d63836e10000000a42189b/frameset.htm|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/05c80724d63836e10000000a42189b/frameset.htm]
Jansi

GTX260-OC High Temps all of a sudden

My N260GTX-T2D896-OCv2 temperature is going up to 99C. I always had the fan speed set to 60% and before the temp wouldn't go past 65C. I cleaned whatever dust there was and tried again with same result. Now my fan speed is at 75% and the temp is holding at 74C. What's happening? Should I reinstall the nvidia drivers, maybe something is causing the reading to be inaccurate?
I checked the temp with msi afterburner(using this to increase fan speed), gpu-z, hwmonitor.
Thanks

http://www.newegg.com/Product/Product.aspx?Item=N82E16814127409 I bought the card 2/22/09
This is what I'm doing.. I launch world of warcraft and sit on the login screen and watch my temps go up. It's never been above 65C(on 60% fan speed) , ever , until now. I have to keep the fan speed above 75% or the card will get to 99C like it did earlier today when I decided to check. PCB temp is high too, 59C. I reinstall nvidia drivers and still same thing, high temps and I'm only using 84% of the GPU too.. if it was any higher who knows how hot it will get.

Strange thermocouple readings at high temps

I am having trouble reading my thermocouples at high temps. I have a 9074 cRIO with a 9211 thermocouple module connected to 3 K-type thermocouples. The thermocouples monitor 3 heat zones of a giant furnace, in which the zones can be turned on and off using a solid-state relay. When turned on, the thermocouples read the temperature normally up to 800 degrees C. However, when it goes past 800 degrees, it may seem to be reading normally, but when you switch different heater relays on or off, the thermocouple reading changes significantly some times. This does not happen below 800C. See attached pictures, and assume the first picture is the correct base temperature:
When I attached the first zone to an external thermocouple reader with its own digital display, I do not see this drastic change when switching the relays on and off. It stayed relatively constant.
Why am I seeing such a big change with the 9211 module? I am not processing the signal in any way, just a direct read-through, and the module itself is set to read K-type thermocouples. The heater contactor and the thermocouples are relatively far away.
Any help is appreciated.
Linus
Solved!
Go to Solution.

Hi Craig,
Yes, I was able to resolve this issue. a LabVIEW field engineer suggested this solution and it worked. See Section 3 Measuring Floating (Nonreferenced) Sources at this link:
http://www.ni.com/white-paper/3344/en/#toc3
The source of the problem was instrumentation amplifier input bias currents, which was causing the voltage level of the floating source to be moved out of range. I needed to add bias resistors to provide a DC path from the instrumentation amplifier inputs to the instrumentation amplifier ground and anchor this voltage level to some reference. I followed FIgure 10 and added two 100 kOhm resistors for each of my thermocouples. Since then, I did not get anymore fluctuating readings.
Hope this helps,
Linus

845PE Max.Does this board have high temp issues?

Hi.
Does it?Because i bought the 845PE Max2 but im getting high temps and it hangs on me.
Wich is best of them.I dont want another high temp mainboard,hehe.

Can you tell me more about your hang? I too am
experiencing a hang, as well as high temp readings
unfortunately. I have done low-level testing of my
RAM with no report of errors. In addition, I have
also run 3DMark2001 and it hangs when I run the demo
that has audio, however I did not get a hang when
running the non-audio benchmark.
Since another board for you did the trick, I am
wondering if I should go the same route.
- Michael Morton
845PE Max2 (MS-6704)
Antec Plus660AMG
2xKingston 512MB DDR PC2700
Plextor 48x24x48
Atec Pro III Multiple Flash Card Reader
Leadtek WinFast A250 Ultra TD
WD Special Edition 180GB HD
SoundBlaster Audigy 2

High values of CPU on our router.

Hi all,
we have router Cisco 3660 and we observe
last time high values of CPU on our
router. It happens only when we do backups. Maybe once per week.
CPU rises up to 90 % and big traffic is
only on interfaces from and where are
backups transmited. From our monitoring system we see on interfaces cca 30MB load.
So is it possible to tune this load?
Or should we upgrade IOS?
Any suggestions?
BR
jl

hi ali,
CEF is cisco express forwarding...its provide the very high speed switching of data...it maintain the FIB and aducancy table in order to achive the fast data transfer...FIB is same as our routing table and adjucany table havig hardware address binding...in CEF first packe to the destination is forwarded by the layer 3 software base lookup and then all the subsequence packet will send by the rewrite the packet using ASIC which make it faster...its also use full when you are having more cpu usage.. .
hope this will help you
rate this post if it helps
reagrds
Devang

My iPad (new 16gb) is often high temp and makes many times restarts. Is this problem? What should I do?

My iPad (new 16gb) is often high temp and makes many times restarts. Is this problem? What should I do?

Take it back. Dont try to trouble shoot. I just upgraded to the new ipad last week. Mine doesnt do that. It doesnt even get that "hot" like people say. A little warmer, yes. It should no way keep restarting due to temperature. If someone here says its normal, they are full of crap. Dont screw around with it, just take it back asap and explain it to apple. You will get another one.

Igsmux_mt consumes high amount of CPU

Hi experts
IGS is configured on 2 ports 40101 and 40102 hence 2 igspw_mt process
now there are 2 igsmux_mt process
1 is consuming around 60% of CPU
Name            PID CPU% PgSp Owner           ServerV3       0   "h" for help
igsmux_m     557252 61.5 11.9 ap5adm          ClientV3       0   "q" to quit
java         446516   8.9 59.7 root
plaixlps161:ap5adm 6> ps -ef|grep -i igsmux
ap5adm 557252 806988 480   Sep 12      - 14461:03 /usr/sap/AP5/SYS/exe/run/igsmux_mt -mode=profile -restartcount=0 pf=/usr/sap/AP5/SYS/profile/AP5_D01_plsapap501
ap5adm 590052 1306756   0 09:43:37 pts/1 0:00 grep -i igsmux
ap5adm 610450 393276   0   Sep 12      - 2:45 /usr/sap/AP5/SYS/exe/run/igsmux_mt -mode=profile -restartcount=0 pf=/usr/sap/AP5/SYS/profile/AP5_D01_plsapap501
As there are 2 port watcher process der r 2 igsmux_mt process rt so if i kill 1 the high consuming process it will be restarted
is it ok if i kill it?
any idea to troubleshoot why this is consuming high amount of CPU?
Also when i test connection it shows IGS could not be reached
Awaiting reply
Regards
Ameya
Edited by: Ameya Joshi on Sep 16, 2009 10:03 AM
Edited by: Ameya Joshi on Sep 16, 2009 10:09 AM

Thanks Juan
I already read that thread
In it is mentioned igswd_mt i.e watchdog thread automatically restarts the port watcher process igspw_mt rt
Also 1 more thing
in transaction SIGS , in the adiministration menu there are no incoming calls i mean the calls graph is at 0
now the mux process listens the call from listener and forwards it to port watcher rt
now as no calls are the mux should not be active rt?
Also when i test the chart engine it shows IGS not reached
Awaiting your reply

MSI GTX770 gaming high temp, is this normal ?

GTX770 gaming 2GB
PSU NZXT 650 i just got this one so i think it's not a problem
When i'm gaming usually is Battlefield 4 temp is always 80-84c.
but highest temp show on afterburner is 87c sometimes it's could up to 89c , i cant check it's realtime because rivastatic server do not support battlefield 4 x64.
what wrong with it, it's sound temp too high i'm not OC and not use gaming app.
I never get crash or poor performance or something else but high temp.
Indeed i wanna try to replace silicone but i can't because they have warrantry void on the screw of the card.

Quote from: flobelix on 13-December-13, 06:01:43
MSI allows to change thermal paste or even change cooler as long as not damaging anything doing so. The sticker is there to warn unexperienced users about possible risk of voiding warranty. So no worries warranty will be fine. If you want to hear from MSI contact the local branch: >>How to contact MSI.<<
Here's afterburner SS look at max temp said 88c max.
I'm read many review from any website not even see high temperature like this on msi GTX770 or other brand , that why I came here I just want to know is my tempreature normal
If yes i will not do anything.
Here's the viod on the screw , Are you sure I can remove it
I bought it's from distributor call ascenti resources in Bangkok Thailand.
http://www.ascenti.co.th/

High temp on cpu 2

Similar Messages

Maybe you are looking for