High treble left vs. bassy right speaker ?

i just noticed that the let speaker plays out higher treble sounds and the right speaker carries more bass. is this suposed to be a design of the speakers so they balance out when the output balance of both is equal (ie at the centre of the left-right bar) ?
i ve pulled it to the far left and obviously the let speaker has higher frequency - treble sounds and when only the right speaker is on, i can hear the bass thumping which is missing on the left. anyone has the same experience ?

maybe it's both

Similar Messages

[Software] Switch Left/Right speake

Hi, I want to switch my front left and front right speaker output with software, because I am unable to switch them physically. Is there any way to do this?
If its needed I am able to switch my rear speakers physically so something that switches both front and rear would be good aswell.
I am using the Sound Blaster X-FI Xtreme Audio card with a set of X-530 Logitech 5. speakers.
Thanks in advance.Message Edited by karozkap on 2-02-200708:3 PM

Should I post this somewhere else? Or is it really utopia? Thks

How to generate a sound (tone) without clicking noise, and how to select left or right speaker

Hi All,
I am trying to write write a VI that generates a pure tone of specific frequency and volume, then sends that tone to one speaker or the other (Left or right) for use in teaching students about audiology (those hearing tests you may have taken where you hear a noise in one ear or the other). I have created a rather primitive VI to accomplish this, but I am plagued by a few issues:
1) At some frequencies but not all, the VI generates a clicking sound at the start and stop of the tone (I believe this is related to repeating configuration and call of the hardware, but I don't know how to set this up ahead of time and avoid it - and why doesn't it create the clicking sound at all frequencies?).
2) At some frequencies (14000Hz and higher), I don't hear the tone at all on my computer speakers (I still hear the click before and after, but I don't hear the tone. I know what you might be thinking, but no, this is not a hearing deficit on my part :-)
3) I would like to be able to direct the tone selectively to the left speaker or right speaker, but right now my VI only allows me to pick the "number of channels" (for which I presume "2 channels" means both left and right), but I don't know how to selectively pick only one channel or the other.
Thank you for any helpful suggestions you can offer,
Eric
Solved!
Go to Solution.
Attachments:
Audiograph_Erics version.vi ‏65 KB

Eric,
Yes, I intended to include an image. Sorry. Here it is.
Thanks for the subVI. With it I hear clicks most of the time except on some of the low amplitude outputs. Interestingly, at frequencies above 10 kHz where my hearing is poor, when I do hear something it is a non-pure sound with a dominant frequency lower than the generated frequency. I am not sure whether it is something in the sound system on my computer or in my ear/brain/mind acoustic analysis system. Here is what I get with my bad ears.
This is what the graph on Generate Sound-subVI shows when I hear the lower pitched sounds. Although the frequency is low enough that it is not aliased, I suspect that I am hearing the envelope rather than the underlying carrier.
I have not played with the windowing yet to see if that reduces the clicks. They could be generated by the Sound Write turning sound on and off.
Lynn

I-trigue 3400 soundwoofer not working / right speaker low output compare with left speaker

Hi, basically i have 3 sets of creative i-trigue 3400 purchase as second hand. All these 3 sets have some minor problem. I trust my ability i able to repair it as iam a professional electronic engineer. Just need some advance information or guidance from creative big brother and sister.
i do check with the controller everything, because i have 3 sets so i able to verified the problem.
1)subwoofer not output----Is it problem with amplifier or any transistor damage? How do i start checking and verified it?
2)right speaker low output compare with left speaker----I already analysis it and would like to know is it the transistor prolem? Please let me know so i can start with my repairing.
From what i know, this model seem like going to discord soon, so is it possible send me a partial schematic on the 3400 so i can repair. Please let me know and reply me, i am waiting your answer. Thank you

seem like nobody reply my email, can creative technical provide some guide. I already mention i will repair myself.:angry:

Gt 683r right speaker pitches at high volume, suggestions ??/

Hi,
I have an gt 683r gaming laptop, however there seems to be a problem with the right speaker as at high volume it starts to pitch and it makes listening to music annoying.
Does anybody have the same problem, and how could it be solved.
Thx

Contact your reseller and send it to RMA would be my advice.
I'm not award of any apart issue on this model, probably it is an hardware issue and only solution would be RMA.

HP DV7T Quad: Audio is louder from right speaker then left speaker!

I've seen this issue posted on other sites like notebookreview, notebookforums etc but there doesn't seem to be any fix for it...which makes no sense to me. The right speaker in my notebook is louder then the left one is. The only way to compensate for the problem is to lower the "balance" in the sound properties for the right speaker (I have it all the way down to 70 if you can believe that!) Now my audio sounds even between the left and right speaker. I think it's ashame that seems to be the only fix for the problem. Not sure if this is a driver issue or a hardware issue.
NVidia installs audio drivers to the computer when installing the video drivers (which I still don't understand why...I thought NVidia was a graphics company?) Then I install the IDT drivers/software afterwards. HP has verified that this is correct so everything on my end is up to date...minus of course offical drivers for the 320M video card that everyone is still waiting on!
Any solutions to this?

Thanks for the info

My iMac sound keeps resetting to come out of left or right speaker only. Why?

I have a new iMac 5k Retina. With this purchase I also started using some speakers through the headphone jack. I've noticed this annoying pattern that quite often the sound from the iMac keeps resetting to come out of the left speaker only or the right speaker. I keep having to reset it to balance them.
Is there a way to stop this?
Thanks.

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

Left speaker loud...right speaker very low or not working?

I noticed this because when I hold the iphone I always cover the left speaker and can barely hear whatever is playing be it a song or phone call. I was wondering if this is something I should go into get repaired or if everyone is experiencing this with the iphone?
I cover the left speaker and barely hear anything at all. I cover the right speaker and the left speaker is fairly loud. I'm thinking my right speaker is just not working...too bad I thought I was in the clear sigh everything else is working fine.

Simply because the right grill is a mic, and the left one a speaker, doesn't make the mic grill soundproof to what's audible from the speaker. If sound leaks out of the right grill then that might simply be audio leaking from the playback of the speaker.
But to say it's not true? It says so clearly in the Apple User's Guide, in the keynote Steve himself made to introduce it, and the support videos all over the Apple website.
Call Apple and look into the issue.

Changing track from left to right speaker

I recently acquired a Macbook with Garageband '09. I made a recording with two mics, one recording a guitar, and one recording a drum kit (They were both recorded at once on the same track). Since I had set the input to stereo, the guitar (mic 1) played through the left speaker, and the drums (mic 2) played through the right speaker. I would like to have mono sound, but I still want to use two mics to provide better clarity and prevent spill.
Is there a way to keep the track I have (guitar=left/drums=right) and perhaps duplicate it and switch channels from left to right creating a mono sound? Basically one track would be guitar=left/drums=right and the other would be guitar=right/drums=left. Or is there perhaps a way to switch a stereo recording to mono once recorded?

I would like to make a track mono, but do not see where in the "pane" I can do that. The only option I have found is to change the input from stereo to mono. Since I have audio that is already recorded, and is unfortunately only on the left track, is there a way to get the mix down to be mono so that I'm getting the audio in both speakers?

I made a project with multiple tracks and had it all panned and mixed. Now it's only playing in the right speaker. Not even regestering a left side in the master volume? What happened, how can I get both sides back?

I made a project with multiple tracks and had it all panned and mixed. Now it's only playing in the right speaker. Not even regestering a left side in the master volume? What happened, how can I get both sides back?

Thank you for that info.
For video, the codec is MPEG-4 Video (XVID) and for audio it says MPEG Audio Layer 1/2/3 (mpga).
There are two issues with that file:
The first is the Xvid CODEC (not meant for editing), and then the MPEG Audio/MPGA. I would convert that file, to something that is more editable.
Good luck,
Hunt

How to adjust audio balance (left or right speaker) in Logic 9?

Hi,
I am playing a midi file with several instruments in Logic. Some of the instruments seem to output from the left speaker only, while others are from the right speaker only.
In each instrument there is a small circular graphic with a number (its either -50 or +50 depending on the instrument). It seems that changing this value adjusts the balance:
ie. -50 = left speaker only
+50 = right speaker only
0 = Both speakers equally.
After I change the values to 0, the audio plays through both speakers (this is what I want). But the moment I rewind the midi file, all instruments go back to their previous values of -50 or + 50. How do I make sure that the settings remain the way I want, and don't go back to what they were when I rewind?
Thanks.

Hi
It seems likely that the Regions created from the MIDI file have embeded Pan (CC10) and likely Volume (CC7) messages. Open each and every region in the Event list, and delete all CC10 (& CC7) events.
CCT

SBS245 - Right Speaker has a lound sound then Left Speaker

Hi All, I just bought a Creative Speaker SBS 245. The problem i am facing is that the Right Speaker is louder than the Left Speaker. Is it suppose to work that way? if yes any specific reason for it? Also when i run it on full volume, the voice cracks. Any resolution to it? Thanks in Advance. Regards,Jayu

Have you tried a driver update from your support page?
http://h10025.www1.hp.com/ewfrf/wc/product?product=5093402&lc=en&cc=us&dlc=en&task=&lang=en&cc=us
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

ITrigue L3800 - Where do I get extension cables for the left & right speaker ? HELP !

@ reader : I have already contacted Creative Labs themselves but they unfortunately do not offer any extension cables that run between the left or right speaker and the sub-woofer. And since the connection into the sub is a weird looking '3 pins stacked on eachother' type, I am wondering if anyone has seen extension cables for connections like these.
I am grateful for any help on the issue (adresses, weblinks etc.), because it is really bothering me and the way I want to set up the system in my living room !
Have a great day !

OMS. If you can still find it. try searching for Opcode OMS (open music system) You need it to run usb midi interfaces in OS9. Good luck, I'd seriously consider getting Logic express.

Static crackling noise, Right speaker when audio is being played

I recently purchased this Satellite C50D-A Windows 8 Laptop. I have had it for less than 3 months. Recently the right speaker has started acting up with some sort of high pitched static crackling noise whenever audio is played regardless of it being in a web browser or any other media. Even computer sounds are distorted from this. I typically use this computer for school and play music to study. How the hell can I fix this so I can actually listen to audio without this rather irritating issue?

I tried that and it didnt seem to do much of anything.
I played part of a song on spotify and recorded it to perhaps give you an example of what it sounds like?
I covered the left speaker so most of what you hear is the right speaker alone. The distortion is pretty clear when audio comes out of that speaker.
Attachments:
example.zip ‏723 KB

Right speaker is not working in my g6 1201tx.

I have a Pavillion g6 1201tx model and my right speaker is not working at all. When I switch the all balance to the right speaker, no sound comes from the laptop and shifting it to the left one or to the centre starts giving sound again. I have tried reinstalling the drivers but to no avail.I also tried removing the batteries and putting it back and running again; its not helping.
The driver installed version is: 6.10.6341.0
(IDT High Definition Audio CODEC)

Not unless your Dad has a knock-off or a fake 3GS it doesn't. The first generation iPhone, the 3G, and the 3GS include a single speaker. The opposite grill that appears the same is the iPhone's microphone. If your Dad's iPhone has two speakers, where is the microphone located on his iPhone?

High treble left vs. bassy right speaker ?

Similar Messages

Maybe you are looking for