High volume txns and concurrent users

I have a application in hand which will be reqd to support 100000 txns per day and about 500 concurrent user
. Can BEA WebLogic deliver that. Do you have a live project example of this volume done in Weblogic.
It would be nice if U can help me on this

"DT" <[email protected]> wrote:
>
I have a application in hand which will be reqd to support 100000 txns per day and about 500 concurrent userwhen you say concurrent user, do you mean to say
1. concurrent HTTP sessions or
2. max connections(TCP/IP) to the server at any point of time..
can you provide with more info regarding the requirements...
1. How big is the application?
2. What type of application?
3. MAX HTTP Sessions at any point of time
4. MAX Connections at any point of time
5. HOW fast is the application...(jsp/ejb/db or jsp/ejb to external interfaces like messaging systems...etc...)
. Can BEA WebLogic deliver that.TTBOMK and assuming jsp/ejb/db...yes,..the point is to determine the h/w required to support the requirement.
Do you have a live project example of this volume done in Weblogic.
It would be nice if U can help me on this

Similar Messages

Hign vol txns and concurrent users

          I have a application in hand which will be reqd to support 100000 txns per day and about 1000 concurrent user
          . Can BEA WebLogic deliver that. Do you have a live project example of this volume done in Weblogic. What will be the scalability
          It would be nice if U can help me on this


In article <[email protected]>, [email protected] says...
          >
          > I have a application in hand which will be reqd to support 100000 txns per day and about 1000 concurrent user
          > Can BEA WebLogic deliver that. Do you have a live project example of this volume done in Weblogic. What will be the scalability
          > It would be nice if U can help me on this
          >
          DT,
          Do call a BEA sales rep. They have the documentation and access to
          engineers to discuss this with you in person. Rob, Gene et al are not
          equipped (or authorized, I think) to disseminate this sort of
          information in this forum.
          BTW 1M tx a day is a lot as is 1000 concurrent users. I'd be more
          focused on networking and database hardware then app server.
          Jesse

Named and Concurrent users

Dear Friends,
Please help me to find named number of users in PeopleSoft specific to module.Below are the modules i am using and i wanted to know named and concurrent users using these modules
Human Resources
Benefits Administration
Pension Administration
Thanks
Uday.

Hi Bart,
Difference between named users and concurrent users:
Named user means when you buy BOXI you buy a certain amount of named user licenses and then you give each of these named users a login. It`s a cheaper type of license but you have to know exactly who your users are, and so is pretty useless if your userbase is constantly changing or your exposing Infoview over the web.
Concurrent user licenses are now only available in BOXI Edge - the equiv in BOXI Pro\Premium is a CPU license, which means you can let as many people login as your hardware will support. Concurrent user licenses are useful when you don`t know who your userbase is - you can just give a generic login for people to use. Or give people specific logins and not worry that they might not be using the system and using up a valuable named user license.
for more information follow the below links:
http://www.forumtopics.com/busobj/viewtopic.php?p=476977
http://www.forumtopics.com/busobj/printview.php?t=125096&start=0&sid=095882f7c0d636e7bca723e5930c21d3
Hope this helps.
Regards,
Deepti Bajpai

High txn vol and concurrent users

I have a application in hand which will be reqd to support 100000 txns per day and about 500 concurrent user
. Can BEA WebLogic deliver that. Do I need any tools like Tuxedo etc. Do you have a live project example of this volume done in Weblogic.
It would be nice if U can help me on this

100000 txs per day is about 1-2 tx per second. (unless my math is
off). That should be no problem for WLS.
I would suggest that you talk to your sales representative or
[email protected] for customer references.
-- Rob
DT wrote:
>
I have a application in hand which will be reqd to support 100000 txns per day and about 500 concurrent user
Can BEA WebLogic deliver that. Do I need any tools like Tuxedo etc. Do you have a live project example of this volume done in Weblogic.
It would be nice if U can help me on this

EP Performance Tunning and concurrent user login problems

Hi all.
We have a EP , integrated with Windows AD and SAP R3.
In real situation, there will be 1000 users login in EP in 0.5 hours. And their operation time will be 6-8 hours, connect to R3 or other applications.
Is EP can support such concurrent user login scenario ?
if EP fails, is there some performance monitor tool or performance tunning issue ?

Hi
EP supports this logon load, however it all depends on sizing and architecture! Also the content of the STARTPAGE can be critical (make it "light").
If the portal fails, then often it is only one J2EE server process, which fails - so by having more server-processes will be an easy/minimum form of high availability. A "real" HA solution must be considered if your business will not work without the portal og SAPGUI connections can be used as workaround/fallback in such situations.
BR
Tom Bo

Tool to export and import high volume data from/to Oracle and MS Excel

We are using certain reports (developed in XLS and CSV) to extract more than 500K to 1M records in single report. There around 1000 reports generated daily. The business users review those reports and apply certain rules to identify exceptions then they apply those corrections back to the system through XL upload.
The XL reports are developed in TIBCO BW and deployed in AMX platform. The user interface is running on TIBCO GI.
Database Version: Oracle 11.2.0.3.0 (RAC - 2 node)
The inputs around following points will be of great help:
1) Recommendation to handle such higher volumes reports and mechanism to apply bulk correction back to system?
2) Suggestions for any Oracle tool or third party tool

If you were to install Oracle client software on the PC where EXCEL is installed,
then you can utilize ODBC such that Excel can connect directly to the DB & issue SQL.

Error in High Volume Campaign

Hello Community,
I am trying to start a high volume campaign with the Marketing Manager role but it wont work. I start by setting up a segmentation model with usage "High Volume Segmentation" and start to define my target group with the modeler. After i save everything and turn back to the initial Campaign editing screen, to start the Campaign, the Job is scheduled and directly canceled. When I click on the Job Status link (which is "Job canceled") in the Column "Job Status" I get the Job overview. The Error Message I get is
Renumbering of target groups failed
This Error Message only appears, when I want to create a High Volume Segmentation. Ordinary Campaigns, without the new modeler, are running trough without any problems.
I am really struggling with this Error and it is driving me crazy! Can anyone help me?
Thank you very much in advance!
Greetz
Ole

Hello Willie,
the only error message I get is "Renumbering of target groups failed". In the Execution Monitor the Systems gives the following feedback:
(ok checkbox) High-volume execution job created; job name = JOBNAME123 = 17220900 user = XYZ123
(error checkbox) Renumbering of target groups failed
(ok checkbox) High-volume marketing execution job status set to 'Canceled'
Do you know if I can have a more detailed look at this job in SAP CRM? I might be able to give some more information on this error message if I can have "a look behind the scenes".
Thanks
Regards,
Ole

Load balancing and clustering for SQL SERVER ANALYSIS SERVER instances to access large number of concurrent users for bi site

HI
how to do analysis server clustering
we have sharepoint bi site and we published many dashboards pointers ,filters kpis
and at a time some 200 to 300 concurrent users access these dashboards pages
so for maintain this requirement how we apply clustering for ssas intances
and also it has load balancing
adil

Hi Adil,
According to your description, you want to implement SQL Server Analysis Services Clusster and Analysis Services Load Balancing, right?
In SSAS, we can design highly available solutions in Analysis Services by using: network load balancing (NLB) technologies, failover clustering technologies, or both. For the details about implemention, please refer to the links below.
http://msdn.microsoft.com/en-us/library/dn736073.aspx
http://sqlsrvanalysissrvcs.codeplex.com/wikipage?title=Analysis%20Services%20Load%20Balancing
http://technet.microsoft.com/en-us/library/bb500217(v=sql.105).aspx
Regards,
Charlie Liao
TechNet Community Support

IFS and 3000 concurrent users ?

We have tested iFS in a small scale and it works fine, but it requires a lot of resources. We now have a case with a client who wants to run iFS for 3000 concurrent users. Are there any whitepapers etc where scalability of this scale is discussed ? I have read about the Siemens-reference, do they have any numbers ?

Comments below (after your questions)
Q1) To increase the maximum heap size in iFS 1.0.8.3 on Solaris 7, we modify the -mx heap size in the ifsstart script (command below). Is this the correct location to modify this setting?
A1) No. In the iFS 1.0.8 Installation Guide, on page 1-5, it says "JVM maximum heap sizes can be configured by editing the following file:
$ORACLE_HOME/ifs/settings/IfsProtocols.def."
There you can specify the MX setting independently for each protocol.
Q2) There is an additional command in ifsstart to restart JWS. By default, this -mx heap size is smaller than the other. What is the reason behind this?
A2) It's not exactly clear, but on page 1-4 of the iFS 1.0.8 Installation Guide, it says:
Note: The Java Web Server (JWS) is actually made up of up to three processes, each of which is set to have a maximum heap size of either 64M (minimum requirements) or 128M (recommended settings). In almost all cases, only one of these processes will ever come close to consuming this maximum amount. The memory usage of the other two processes is negligible.
I believe that the "mx" is lower because it doesn't need much memory. (But I don't have a 1.0.8 install in front of me).
Q3) If you have the memory avaiable, should each of these heap sizes be set to the maximum the JVM can handle (2GB)? Drawbacks?
A3) If you have enough memory, and you are starting the iFS protocols using ifsstart, then each of the MX settings in the IfsProtocols.def file should be set as high as 2G (for each protocol you're using).
Q4) $IFS_JWS_HOME/bin/jserv -jre -vmargs -mx512m > $ORACLE_HOME/ifs/log/JWS.log 2>&1 &
A4) I think this is right.
null

My volume button for higher volume(F12) is not working whereas mute and lower volume(F10 and F11) buttons are working, what should I do?

My volume button for higher volume is not working

I think there is a Windows bootcamp application that will recognize those keys. The bootcamp stuff is here: http://www.apple.com/support/bootcamp/
I think it is called bootcamp assistant. Look here: http://www.mac-guides-and-solutions.com/boot-camp-assistant.html

When I have headphones plugged into my iphone it says warning'' high volume'' and becomes first a red and then plop a number of red pops but it will not be so for someone else I know. My sound will be much lower than anyone else in the music, and when I t

When I have headphones plugged into my iphone it says warning'' high volume'' and becomes first a red and then plop a number of red pops but it will not be so for someone else I know. My sound will be much lower than anyone else in the music, and when I talk by phone headset

Hi! I have the same problem when I use my headphones .
iPhone 4s England, iOS 6.1.2

A quick question about WebDynpro SLD and R/3 with concurrent users

Hello ,
I have a very quick question about Webdynpros and SLD connecting to an R/3 system, when you configure a webdynpro to connect to an R/3 system using SLD, you configure a user name and password from the R/3 for the SLD to use. What I would like to know is when I have concurrent users of my webdynpro, how can I know what one user did in R/3 and what another user did? Is there a way for the users of the web dynpro to use their R/3 credentials so SLD can access the R/3? Like dynamically configuring the SLD for each user?
- I would like to avoid leaving their their passwords open in the code ( configuring two variable to get the users username and password and use these variables as JCO username and password )
Thanks Ubergeeks,
Guy

Hi Guy
You will have to use Single Sign On to achieve this. In the destination you have defined to connect to R/3 , there is an option to 'useSSO' instead of userid and password. This will ensure that calls to R/3 will be with the userid that has logged into WAS. You wont need to pass any passwords because a login ticket is generated from WAS and passed on to R/3. The userid is derived from this ticket.
For this to happen you will have to maintain a trust relation ship between R/3 and your WAS ,there is detailed documentation of this in help files. Configuration is very straight forward and is easy to perform
Regards
Pran

How to prepare high volume segmentation on crm and trex 7.1

Hi,
I have trex 7.1 connected to our crm system.
I have set up esh on the web ui.
Now I would like to use high volume segmentation.
So therefore i have created a datasource in crmd_mktds on both an "Attribute Set" and InfoSet.
Then I have created attribute list for high volume segmentation.
But I can't see the columns indicating that fast find is in use.
Our CRM system is:
SAP_ABA = SAPKA70106
kr
Michael Wolff
Update:
I solved this.
I forgot to define RFC destination for TREX index and fast find under marketing -> segmentation.
So now everything works
Edited by: Michael W. Knudsen on Oct 21, 2010 6:59 AM
Edited by: Michael W. Knudsen on Oct 21, 2010 7:00 AM

Did the missing cutomizing, thx Willie for directing me in the correct direction

HT6154 HI , I am still under cotract with my iphone 5 and i can't hear anything even though i have my phone set to high volume

i am using iphone 5 and still under contract with ATT services. the phone has suddenly some technical issue. when i call some one or some one calls me, if i i turn on th emusic anything that hass to do with listening to the device, it doesnot work
i hear very very low voice eventhough it is set to high volume. will ATT will provide me free support for the phone?

Only ATT can answer that.

On-premise High-trust App and 401 (appredirect.aspx) for anomyous user

Hello,
I've developed a provider hosted App. The App can be used by authenticated and anonymous users. On my development platform the App is working in both cases as expected. Then I configured a new test Server (I did all the steps for high trusted Apps) and installed
the new App (Register app, created a new package in Visual Studio, did the changes for the TokenHelper class and so on). Now, the App ist working for authenticated users only. For anonymous users the appredirect page is asking for credentials. The SharePoint
log contains only a few Information about the problem:
client_id: i:0i.t|ms.sp.ext|..... and instance_id:
https://xxx/Pages/AppPartPage.aspx?SPHostUrl=http%3A%2F%2FXXXXXXX%2FDE%2FSP2013Standard&SPHostTitle=SP2013%20Standard%20Layout&SPAppWebUrl=""&SPLanguage=de%2DCH&SPClientTag=1&SPProductNumber=15%2E0%2E4420%2E1017&wpId=g%5F5b8feaca%5F038f%5F473d%5F8001%5F0a91849f9a05&editmode=0&SenderId=1DD84F040
from query string
redirectLaunUrl after getting it from query string, web or app instance:
https://remote-domain-app/Pages/AppPartPage.aspx?SPHostUrl=http%3A%2F%2FXXXXXXX%2FDE%2FSP2013Standard&SPHostTitle=SP2013%20Standard%20Layout&SPAppWebUrl=""&SPLanguage=de%2DCH&SPClientTag=1&SPProductNumber=15%2E0%2E4420%2E1017&wpId=g%5F5b8feaca%5F038f%5F473d%5F8001%5F0a91849f9a05&editmode=0&SenderId=1DD84F040
redirectLaunUrl after getting token replacement:
https://remote-domain-app/Pages/AppPartPage.aspx?SPHostUrl=http%3A%2F%2FXXXXXXX%2FDE%2FSP2013Standard&SPHostTitle=SP2013%20Standard%20Layout&SPAppWebUrl=""&SPLanguage=de%2DCH&SPClientTag=1&SPProductNumber=15%2E0%2E4420%2E1017&wpId=g%5F5b8feaca%5F038f%5F473d%5F8001%5F0a91849f9a05&editmode=0&SenderId=1DD84F040
m_oauthAppId after NormalizeAppIdentifier() i:0i.t|ms.sp.ext|548...... Now getting app principal info.
decided that we need to do a POST to the app.
NOTHING MORE
The remote IIS web allows anonymous access and I can open the remote web site as anonymous user. Tried to set the the App Principal permission again, but without luck. When the remote web is stopped the 401 error still exist - no other error.
I've no idea what I can check next.

Hi,
You can use PowerShell to get the AppPrincipal.
$targetWeb = Get-SPSite "http://dev.my.com"
$clientID = "82ea34fc-31ba-4e93-b89a-aa41b023fa7e"
$authRealm = Get-SPAuthenticationRealm -ServiceContext $targetWeb
$AppIdentifier = $clientID + "@" + $authRealm
$appPrincipal = Get-SPAppPrincipal -Site $targetWeb.RootWeb -NameIdentifier $AppIdentifier
I suggest you try to delete the app and use the following PowerShell script to install the APP.
param
[string]$Web = $(throw '- Need a SharePoint web site URL (e.g. "http://portal.contoso.com/")'),
[string]$Source = "ObjectModel"
Write-Host -ForegroundColor White "-------------------"
Write-Host -ForegroundColor White "| App Installer |"
Write-Host -ForegroundColor White "-------------------"
Write-Host -ForegroundColor White "- "
#Global vars
$AppPackageName = "App.app";
#Loads powershell settings
Write-Host -ForegroundColor White "- Load Powershell context.."
$0 = $myInvocation.MyCommand.Definition
$dp0 = [System.IO.Path]::GetDirectoryName($0)
#Loads the SharePoint snapin
Write-Host -ForegroundColor White "- Load SharePoint context.."
$ver = $host | select version
if ($ver.Version.Major -gt 1) {$host.Runspace.ThreadOptions = "ReuseThread"}
if ((Get-PSSnapin "Microsoft.SharePoint.PowerShell" -ErrorAction SilentlyContinue) -eq $null) {
Add-PSSnapin "Microsoft.SharePoint.PowerShell";
[void][System.Reflection.Assembly]::Load("Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c")
#Imports the App package
Write-Host -ForegroundColor White "- Import app package '$AppPackageName'..."
$appPath = "C:\Projects\App\App\bin\Debug\app.publish\1.0.0.0" + "\" + $AppPackageName;
if ($Source.Equals("ObjectModel", [System.StringComparison]::InvariantCultureIgnoreCase)) {
$sourceApp = ([microsoft.sharepoint.administration.spappsource]::ObjectModel);
elseif ($Source.Equals("Marketplace", [System.StringComparison]::InvariantCultureIgnoreCase)) {
$sourceApp = ([microsoft.sharepoint.administration.spappsource]::Marketplace);
elseif ($Source.Equals("CorporateCatalog", [System.StringComparison]::InvariantCultureIgnoreCase)) {
$sourceApp = ([microsoft.sharepoint.administration.spappsource]::CorporateCatalog);
elseif ($Source.Equals("DeveloperSite", [System.StringComparison]::InvariantCultureIgnoreCase)) {
$sourceApp = ([microsoft.sharepoint.administration.spappsource]::DeveloperSite);
elseif ($Source.Equals("RemoteObjectModel", [System.StringComparison]::InvariantCultureIgnoreCase)) {
$sourceApp = ([microsoft.sharepoint.administration.spappsource]::RemoteObjectModel);
$spapp = Import-SPAppPackage -Path "$appPath" -Site $Web -Source $sourceApp -Confirm:$false -ErrorAction SilentlyContinue -ErrorVariable err;
if ($err -or ($spapp -eq $null))
Write-Host -ForegroundColor Yellow "- An error occured during app import !"
throw $err;
Write-Host -ForegroundColor White "- Package imported with success."
#Installs the App
Write-Host -ForegroundColor White "- Install the APP in web site..."
$app = Install-SPApp -Web $Web -Identity $spapp -Confirm:$false -ErrorAction SilentlyContinue -ErrorVariable err;
if ($err -or ($app -eq $null)) {
Write-Host -ForegroundColor Yellow "- An error occured during app installation !"
throw $err;
$AppName = $app.Title;
Write-Host -ForegroundColor White "- App '$AppName' registered, please wait during installation..."
$appInstance = Get-SPAppInstance -Web $Web | where-object {$_.Title -eq $AppName};
$counter = 1;
$maximum = 150;
$sleeptime = 2;
Write-Host -ForegroundColor White "- Please wait..." -NoNewline;
$url = "$($Web)_layouts/15/appinv.aspx?AppInstanceId={$($appInstance.Id)}"
$ie = New-Object -com internetexplorer.application
try
$ie.visible=$true
$ie.navigate2($url)
while ($ie.busy)
sleep -milliseconds 60
$trustButton = $ie.Document.getElementById("ctl00_PlaceHolderMain_BtnAllow")
$trustButton.click()
sleep -Seconds 1
Write-Host "App was trusted successfully!"
catch
throw ("Error Trusting App");
while (($appInstance.Status -eq ([Microsoft.SharePoint.Administration.SPAppInstanceStatus]::Installing)) -and ($counter -lt $maximum))
Write-Host -ForegroundColor White "." -NoNewline;
sleep $sleeptime;
$counter++;
$appInstance = Get-SPAppInstance -Web $Web | where-object {$_.Title -eq $AppName}
Write-Host -ForegroundColor White ".";
if ($appInstance.Status -eq [Microsoft.SharePoint.Administration.SPAppInstanceStatus]::Installed) {
Write-Host -ForegroundColor White "- The App was successfully installed.";
$appUrl = $appInstance.AppWebFullUrl;
Write-Host -ForegroundColor White "- The App is now available at '$appUrl'.";
Write-Host -ForegroundColor White "- (Don't forget to add app host name in your host file if necessary...).";
Write-Host -ForegroundColor White "- "
else {
Write-Host -ForegroundColor Yellow "- An unknown error has occured during app installation. Read SharePoint log for more information.";
More TroubleShooting Tips for High Trust Apps on SharePoint 2013
http://blogs.technet.com/b/speschka/archive/2012/11/01/more-troubleshooting-tips-for-high-trust-apps-on-sharepoint-2013.aspx
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected].
Dennis Guo
TechNet Community Support

High volume txns and concurrent users

Similar Messages

Maybe you are looking for