Higher cpu temp

Hi! I'm new to Arch and I like it
That's my problem: the CPU temp is about 70°C, twenty degrees more than when I'm using Ubuntu.
I'm using a Dell laptop (Studio15). The cpu is an Intel Core2 Duo T5800. I also installed powernowd (and it's working).
thanks in advance
byye!!
Ser

is impossible that
powernowd
works because is the AMD cpu's module .....
because you have a INTEL you must load right module
you can see the name in OUR WIKI PAGE:  http://wiki.archlinux.org/index.php/CPU … cy_Scaling
you can configure other things ever in this wiki page to reduce temp

Similar Messages

  • High CPU temps after kernel panic.

    Recently I've seen my Mac Pro 8-core CPU temps rise pretty considerably, between 10°-15°C after a bone head move on my part.
    After setting up a new Vista x64 virtual machine in VMWare Fusion 2, I was trying to get a Linksys USB to Ethernet adapter (USB200M) to work inside this virtual machine, but with little success. After tracking down a driver online which I thought at the time was a match for the chip on the adapter, I tried to load the driver manually in the virtual machine. This unfortunately resulted in an immediate OS X kernel panic; my first and only on this machine.
    Since then, my CPU temps have been on the rise. Not sure if its even possible for a kernel panic to damage hardware, but I’m wondering if any low-level software damage resulting from the kernel panic could be causing the higher temps?
    I tried a simple restart which did nothing. I have since run the extended Apple Diagnostics and everything appeared OK. Also, ran a “fsck” check and everything appeared OK there as well.
    Any feedback, suggestions or advice?
    P.S. This is an Early ’08 2.8GHz 8-core Mac Pro with 10GB third-party RAM. RAM has been thoroughly tested and running in the machine for over a year now without incident.
    Thanks

    No, ethernet ports work fine.
    I use the adapter to connect a VMWare Virtual Machine directly to a VPN Netgear router which runs a remote VoIP service, available on Windows only. To make a long story short, I ran into all kinds of performance issues when connecting the Mac via Ethernet directly to this crappy little Netgear VPN router.
    So, the alternative was to use the USB to Ethernet adapter to connect only the VM directly to this router. Definitely not ideal, but worked fine with XP.
    It was when I upgraded the VM to Vista x64 and tried to install the driver for the adapter that I got the kernel panic and now higher CPU temps.
    Still just curious if I could have damaged any hardware?

  • High CPU temp. while playing sounds

    Hello!
    I have recently installed Archlinux on my Lenovo G560 laptop.
    The specs: Core i5 450M (2.4GHz), nvidia GF310M, 4GB RAM, Broadcom BCM4313 WiFi.
    This laptop is NOT an Optimus setup, so the on-cpu graphics is disabled and undetectable.
    Basically, it works great, cool and quiet, except when playing any sound.
    Standard idle temp. for this PC is around 45*C and battery life is about 3hrs (when 80% charged, idling). It is a bit better than on M$ Win7.
    When I start playing something (mp3's using mpg123 or audacious2 or JuK) the cpu temp skyrockets to around 55-60*C for no apparent reason.
    CPU usage is very low (around 2% for audacious2), and yet it gets hot and drains battery big time. The battery operating time is lower by an hour or so . There is no such problem when running M$ Win7 x64.
    This PC has been configured according to the articles in ArchLinux Wiki, so it runs cool, unless it plays mp3. Even playing some movies with sound output nulled won't warm this PC as much as playing music only.
    I'm stuck, as I think I configured my PC right, tried most (if not all) tweaks I could find in the Wiki and other pages, but, as you can see, can't get any further with this
    Any help will be kindly and greatly appreciated.
    Please look at my system configuration below:
    Grub "kernel" line
    kernel /boot/vmlinuz-linux root=/dev/sda6 resume=/dev/sda5 ro pcie_aspm=force pcie_ports=native usbcore.autosuspend=1 acpi_osi=Linux i915.i915_enable_rc6=1 drm_kms_helper.poll=0
    initrd /boot/initramfs-linux.img
    The kernel is from "linux 3.0.7-1" package.
    Here goes my kernel config:
    # Automatically generated make config: don't edit
    # Linux/x86_64 3.0 Kernel Configuration
    CONFIG_64BIT=y
    # CONFIG_X86_32 is not set
    CONFIG_X86_64=y
    CONFIG_X86=y
    CONFIG_INSTRUCTION_DECODER=y
    CONFIG_OUTPUT_FORMAT="elf64-x86-64"
    CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
    CONFIG_GENERIC_CMOS_UPDATE=y
    CONFIG_CLOCKSOURCE_WATCHDOG=y
    CONFIG_GENERIC_CLOCKEVENTS=y
    CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
    CONFIG_LOCKDEP_SUPPORT=y
    CONFIG_STACKTRACE_SUPPORT=y
    CONFIG_HAVE_LATENCYTOP_SUPPORT=y
    CONFIG_MMU=y
    CONFIG_ZONE_DMA=y
    CONFIG_NEED_DMA_MAP_STATE=y
    CONFIG_NEED_SG_DMA_LENGTH=y
    CONFIG_GENERIC_ISA_DMA=y
    CONFIG_GENERIC_IOMAP=y
    CONFIG_GENERIC_BUG=y
    CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
    CONFIG_GENERIC_HWEIGHT=y
    CONFIG_GENERIC_GPIO=y
    CONFIG_ARCH_MAY_HAVE_PC_FDC=y
    # CONFIG_RWSEM_GENERIC_SPINLOCK is not set
    CONFIG_RWSEM_XCHGADD_ALGORITHM=y
    CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
    CONFIG_GENERIC_CALIBRATE_DELAY=y
    CONFIG_GENERIC_TIME_VSYSCALL=y
    CONFIG_ARCH_HAS_CPU_RELAX=y
    CONFIG_ARCH_HAS_DEFAULT_IDLE=y
    CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
    CONFIG_HAVE_SETUP_PER_CPU_AREA=y
    CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
    CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
    CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
    CONFIG_ARCH_HIBERNATION_POSSIBLE=y
    CONFIG_ARCH_SUSPEND_POSSIBLE=y
    CONFIG_ZONE_DMA32=y
    CONFIG_ARCH_POPULATES_NODE_MAP=y
    CONFIG_AUDIT_ARCH=y
    CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
    CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
    CONFIG_HAVE_INTEL_TXT=y
    CONFIG_X86_64_SMP=y
    CONFIG_X86_HT=y
    CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
    # CONFIG_KTIME_SCALAR is not set
    CONFIG_ARCH_CPU_PROBE_RELEASE=y
    CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
    CONFIG_HAVE_IRQ_WORK=y
    CONFIG_IRQ_WORK=y
    # General setup
    CONFIG_EXPERIMENTAL=y
    CONFIG_INIT_ENV_ARG_LIMIT=32
    CONFIG_CROSS_COMPILE=""
    CONFIG_LOCALVERSION="-ARCH"
    CONFIG_LOCALVERSION_AUTO=y
    CONFIG_HAVE_KERNEL_GZIP=y
    CONFIG_HAVE_KERNEL_BZIP2=y
    CONFIG_HAVE_KERNEL_LZMA=y
    CONFIG_HAVE_KERNEL_XZ=y
    CONFIG_HAVE_KERNEL_LZO=y
    CONFIG_KERNEL_GZIP=y
    # CONFIG_KERNEL_BZIP2 is not set
    # CONFIG_KERNEL_LZMA is not set
    # CONFIG_KERNEL_XZ is not set
    # CONFIG_KERNEL_LZO is not set
    CONFIG_DEFAULT_HOSTNAME="(none)"
    CONFIG_SWAP=y
    CONFIG_SYSVIPC=y
    CONFIG_SYSVIPC_SYSCTL=y
    CONFIG_POSIX_MQUEUE=y
    CONFIG_POSIX_MQUEUE_SYSCTL=y
    CONFIG_BSD_PROCESS_ACCT=y
    CONFIG_BSD_PROCESS_ACCT_V3=y
    # CONFIG_FHANDLE is not set
    CONFIG_TASKSTATS=y
    CONFIG_TASK_DELAY_ACCT=y
    CONFIG_TASK_XACCT=y
    CONFIG_TASK_IO_ACCOUNTING=y
    CONFIG_AUDIT=y
    CONFIG_AUDITSYSCALL=y
    CONFIG_AUDIT_WATCH=y
    CONFIG_AUDIT_TREE=y
    CONFIG_HAVE_GENERIC_HARDIRQS=y
    # IRQ subsystem
    CONFIG_GENERIC_HARDIRQS=y
    CONFIG_HAVE_SPARSE_IRQ=y
    CONFIG_GENERIC_IRQ_PROBE=y
    CONFIG_GENERIC_IRQ_SHOW=y
    CONFIG_GENERIC_PENDING_IRQ=y
    CONFIG_IRQ_FORCED_THREADING=y
    # CONFIG_SPARSE_IRQ is not set
    # RCU Subsystem
    CONFIG_TREE_PREEMPT_RCU=y
    CONFIG_PREEMPT_RCU=y
    # CONFIG_RCU_TRACE is not set
    CONFIG_RCU_FANOUT=64
    # CONFIG_RCU_FANOUT_EXACT is not set
    # CONFIG_TREE_RCU_TRACE is not set
    # CONFIG_RCU_BOOST is not set
    CONFIG_IKCONFIG=y
    CONFIG_IKCONFIG_PROC=y
    CONFIG_LOG_BUF_SHIFT=19
    CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
    CONFIG_CGROUPS=y
    # CONFIG_CGROUP_DEBUG is not set
    CONFIG_CGROUP_FREEZER=y
    CONFIG_CGROUP_DEVICE=y
    CONFIG_CPUSETS=y
    CONFIG_PROC_PID_CPUSET=y
    CONFIG_CGROUP_CPUACCT=y
    CONFIG_RESOURCE_COUNTERS=y
    CONFIG_CGROUP_MEM_RES_CTLR=y
    CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
    # CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED is not set
    # CONFIG_CGROUP_PERF is not set
    CONFIG_CGROUP_SCHED=y
    CONFIG_FAIR_GROUP_SCHED=y
    CONFIG_RT_GROUP_SCHED=y
    CONFIG_BLK_CGROUP=y
    # CONFIG_DEBUG_BLK_CGROUP is not set
    CONFIG_NAMESPACES=y
    CONFIG_UTS_NS=y
    CONFIG_IPC_NS=y
    CONFIG_USER_NS=y
    CONFIG_PID_NS=y
    CONFIG_NET_NS=y
    CONFIG_SCHED_AUTOGROUP=y
    CONFIG_MM_OWNER=y
    # CONFIG_SYSFS_DEPRECATED is not set
    CONFIG_RELAY=y
    CONFIG_BLK_DEV_INITRD=y
    CONFIG_INITRAMFS_SOURCE=""
    CONFIG_RD_GZIP=y
    CONFIG_RD_BZIP2=y
    CONFIG_RD_LZMA=y
    CONFIG_RD_XZ=y
    CONFIG_RD_LZO=y
    # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
    CONFIG_SYSCTL=y
    CONFIG_ANON_INODES=y
    # CONFIG_EXPERT is not set
    CONFIG_UID16=y
    CONFIG_SYSCTL_SYSCALL=y
    CONFIG_KALLSYMS=y
    # CONFIG_KALLSYMS_ALL is not set
    CONFIG_HOTPLUG=y
    CONFIG_PRINTK=y
    CONFIG_BUG=y
    CONFIG_ELF_CORE=y
    CONFIG_PCSPKR_PLATFORM=y
    CONFIG_BASE_FULL=y
    CONFIG_FUTEX=y
    CONFIG_EPOLL=y
    CONFIG_SIGNALFD=y
    CONFIG_TIMERFD=y
    CONFIG_EVENTFD=y
    CONFIG_SHMEM=y
    CONFIG_AIO=y
    # CONFIG_EMBEDDED is not set
    CONFIG_HAVE_PERF_EVENTS=y
    # Kernel Performance Events And Counters
    CONFIG_PERF_EVENTS=y
    CONFIG_PERF_COUNTERS=y
    # CONFIG_DEBUG_PERF_USE_VMALLOC is not set
    CONFIG_VM_EVENT_COUNTERS=y
    CONFIG_PCI_QUIRKS=y
    CONFIG_SLUB_DEBUG=y
    # CONFIG_COMPAT_BRK is not set
    # CONFIG_SLAB is not set
    CONFIG_SLUB=y
    CONFIG_PROFILING=y
    CONFIG_TRACEPOINTS=y
    CONFIG_OPROFILE=m
    # CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
    CONFIG_HAVE_OPROFILE=y
    # CONFIG_KPROBES is not set
    CONFIG_JUMP_LABEL=y
    CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
    CONFIG_USER_RETURN_NOTIFIER=y
    CONFIG_HAVE_IOREMAP_PROT=y
    CONFIG_HAVE_KPROBES=y
    CONFIG_HAVE_KRETPROBES=y
    CONFIG_HAVE_OPTPROBES=y
    CONFIG_HAVE_ARCH_TRACEHOOK=y
    CONFIG_HAVE_DMA_ATTRS=y
    CONFIG_USE_GENERIC_SMP_HELPERS=y
    CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
    CONFIG_HAVE_DMA_API_DEBUG=y
    CONFIG_HAVE_HW_BREAKPOINT=y
    CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
    CONFIG_HAVE_USER_RETURN_NOTIFIER=y
    CONFIG_HAVE_PERF_EVENTS_NMI=y
    CONFIG_HAVE_ARCH_JUMP_LABEL=y
    # GCOV-based kernel profiling
    # CONFIG_GCOV_KERNEL is not set
    # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
    CONFIG_SLABINFO=y
    CONFIG_RT_MUTEXES=y
    CONFIG_BASE_SMALL=0
    CONFIG_MODULES=y
    CONFIG_MODULE_FORCE_LOAD=y
    CONFIG_MODULE_UNLOAD=y
    CONFIG_MODULE_FORCE_UNLOAD=y
    # CONFIG_MODVERSIONS is not set
    # CONFIG_MODULE_SRCVERSION_ALL is not set
    CONFIG_STOP_MACHINE=y
    CONFIG_BLOCK=y
    CONFIG_BLK_DEV_BSG=y
    # CONFIG_BLK_DEV_INTEGRITY is not set
    CONFIG_BLK_DEV_THROTTLING=y
    CONFIG_BLOCK_COMPAT=y
    # IO Schedulers
    CONFIG_IOSCHED_NOOP=y
    CONFIG_IOSCHED_DEADLINE=y
    CONFIG_IOSCHED_CFQ=y
    CONFIG_CFQ_GROUP_IOSCHED=y
    # CONFIG_DEFAULT_DEADLINE is not set
    CONFIG_DEFAULT_CFQ=y
    # CONFIG_DEFAULT_NOOP is not set
    CONFIG_DEFAULT_IOSCHED="cfq"
    CONFIG_PREEMPT_NOTIFIERS=y
    CONFIG_PADATA=y
    # CONFIG_INLINE_SPIN_TRYLOCK is not set
    # CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
    # CONFIG_INLINE_SPIN_LOCK is not set
    # CONFIG_INLINE_SPIN_LOCK_BH is not set
    # CONFIG_INLINE_SPIN_LOCK_IRQ is not set
    # CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
    # CONFIG_INLINE_SPIN_UNLOCK is not set
    # CONFIG_INLINE_SPIN_UNLOCK_BH is not set
    # CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
    # CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
    # CONFIG_INLINE_READ_TRYLOCK is not set
    # CONFIG_INLINE_READ_LOCK is not set
    # CONFIG_INLINE_READ_LOCK_BH is not set
    # CONFIG_INLINE_READ_LOCK_IRQ is not set
    # CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
    # CONFIG_INLINE_READ_UNLOCK is not set
    # CONFIG_INLINE_READ_UNLOCK_BH is not set
    # CONFIG_INLINE_READ_UNLOCK_IRQ is not set
    # CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
    # CONFIG_INLINE_WRITE_TRYLOCK is not set
    # CONFIG_INLINE_WRITE_LOCK is not set
    # CONFIG_INLINE_WRITE_LOCK_BH is not set
    # CONFIG_INLINE_WRITE_LOCK_IRQ is not set
    # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
    # CONFIG_INLINE_WRITE_UNLOCK is not set
    # CONFIG_INLINE_WRITE_UNLOCK_BH is not set
    # CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
    # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
    # CONFIG_MUTEX_SPIN_ON_OWNER is not set
    CONFIG_FREEZER=y
    # Processor type and features
    CONFIG_TICK_ONESHOT=y
    CONFIG_NO_HZ=y
    CONFIG_HIGH_RES_TIMERS=y
    CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
    CONFIG_SMP=y
    CONFIG_X86_MPPARSE=y
    # CONFIG_X86_EXTENDED_PLATFORM is not set
    CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
    CONFIG_SCHED_OMIT_FRAME_POINTER=y
    CONFIG_PARAVIRT_GUEST=y
    CONFIG_XEN=y
    CONFIG_XEN_DOM0=y
    CONFIG_XEN_PRIVILEGED_GUEST=y
    CONFIG_XEN_PVHVM=y
    CONFIG_XEN_MAX_DOMAIN_MEMORY=128
    CONFIG_XEN_SAVE_RESTORE=y
    # CONFIG_XEN_DEBUG_FS is not set
    # CONFIG_XEN_DEBUG is not set
    CONFIG_KVM_CLOCK=y
    CONFIG_KVM_GUEST=y
    CONFIG_PARAVIRT=y
    # CONFIG_PARAVIRT_SPINLOCKS is not set
    CONFIG_PARAVIRT_CLOCK=y
    # CONFIG_PARAVIRT_DEBUG is not set
    CONFIG_NO_BOOTMEM=y
    # CONFIG_MEMTEST is not set
    # CONFIG_MK8 is not set
    # CONFIG_MPSC is not set
    # CONFIG_MCORE2 is not set
    # CONFIG_MATOM is not set
    CONFIG_GENERIC_CPU=y
    CONFIG_X86_INTERNODE_CACHE_SHIFT=7
    CONFIG_X86_CMPXCHG=y
    CONFIG_CMPXCHG_LOCAL=y
    CONFIG_X86_L1_CACHE_SHIFT=6
    CONFIG_X86_XADD=y
    CONFIG_X86_WP_WORKS_OK=y
    CONFIG_X86_TSC=y
    CONFIG_X86_CMPXCHG64=y
    CONFIG_X86_CMOV=y
    CONFIG_X86_MINIMUM_CPU_FAMILY=64
    CONFIG_X86_DEBUGCTLMSR=y
    CONFIG_CPU_SUP_INTEL=y
    CONFIG_CPU_SUP_AMD=y
    CONFIG_CPU_SUP_CENTAUR=y
    CONFIG_HPET_TIMER=y
    CONFIG_HPET_EMULATE_RTC=y
    CONFIG_DMI=y
    CONFIG_GART_IOMMU=y
    CONFIG_CALGARY_IOMMU=y
    CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
    CONFIG_AMD_IOMMU=y
    # CONFIG_AMD_IOMMU_STATS is not set
    CONFIG_SWIOTLB=y
    CONFIG_IOMMU_HELPER=y
    CONFIG_IOMMU_API=y
    # CONFIG_MAXSMP is not set
    CONFIG_NR_CPUS=64
    CONFIG_SCHED_SMT=y
    CONFIG_SCHED_MC=y
    # CONFIG_IRQ_TIME_ACCOUNTING is not set
    # CONFIG_PREEMPT_NONE is not set
    # CONFIG_PREEMPT_VOLUNTARY is not set
    CONFIG_PREEMPT=y
    CONFIG_X86_LOCAL_APIC=y
    CONFIG_X86_IO_APIC=y
    CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
    CONFIG_X86_MCE=y
    CONFIG_X86_MCE_INTEL=y
    CONFIG_X86_MCE_AMD=y
    CONFIG_X86_MCE_THRESHOLD=y
    # CONFIG_X86_MCE_INJECT is not set
    CONFIG_X86_THERMAL_VECTOR=y
    CONFIG_I8K=m
    CONFIG_MICROCODE=m
    CONFIG_MICROCODE_INTEL=y
    CONFIG_MICROCODE_AMD=y
    CONFIG_MICROCODE_OLD_INTERFACE=y
    CONFIG_X86_MSR=m
    CONFIG_X86_CPUID=m
    CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
    CONFIG_ARCH_DMA_ADDR_T_64BIT=y
    CONFIG_DIRECT_GBPAGES=y
    CONFIG_NUMA=y
    CONFIG_AMD_NUMA=y
    CONFIG_X86_64_ACPI_NUMA=y
    CONFIG_NODES_SPAN_OTHER_NODES=y
    # CONFIG_NUMA_EMU is not set
    CONFIG_NODES_SHIFT=6
    CONFIG_ARCH_SPARSEMEM_ENABLE=y
    CONFIG_ARCH_SPARSEMEM_DEFAULT=y
    CONFIG_ARCH_SELECT_MEMORY_MODEL=y
    CONFIG_ARCH_MEMORY_PROBE=y
    CONFIG_ARCH_PROC_KCORE_TEXT=y
    CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
    CONFIG_SELECT_MEMORY_MODEL=y
    CONFIG_SPARSEMEM_MANUAL=y
    CONFIG_SPARSEMEM=y
    CONFIG_NEED_MULTIPLE_NODES=y
    CONFIG_HAVE_MEMORY_PRESENT=y
    CONFIG_SPARSEMEM_EXTREME=y
    CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
    CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
    CONFIG_SPARSEMEM_VMEMMAP=y
    CONFIG_HAVE_MEMBLOCK=y
    CONFIG_MEMORY_HOTPLUG=y
    CONFIG_MEMORY_HOTPLUG_SPARSE=y
    CONFIG_MEMORY_HOTREMOVE=y
    CONFIG_PAGEFLAGS_EXTENDED=y
    CONFIG_SPLIT_PTLOCK_CPUS=4
    CONFIG_COMPACTION=y
    CONFIG_MIGRATION=y
    CONFIG_PHYS_ADDR_T_64BIT=y
    CONFIG_ZONE_DMA_FLAG=1
    CONFIG_BOUNCE=y
    CONFIG_VIRT_TO_BUS=y
    CONFIG_MMU_NOTIFIER=y
    CONFIG_KSM=y
    CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
    CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
    CONFIG_MEMORY_FAILURE=y
    CONFIG_HWPOISON_INJECT=m
    CONFIG_TRANSPARENT_HUGEPAGE=y
    CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
    # CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
    CONFIG_CLEANCACHE=y
    CONFIG_X86_CHECK_BIOS_CORRUPTION=y
    CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
    CONFIG_X86_RESERVE_LOW=64
    CONFIG_MTRR=y
    CONFIG_MTRR_SANITIZER=y
    CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
    CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
    CONFIG_X86_PAT=y
    CONFIG_ARCH_USES_PG_UNCACHED=y
    CONFIG_EFI=y
    CONFIG_SECCOMP=y
    CONFIG_CC_STACKPROTECTOR=y
    # CONFIG_HZ_100 is not set
    # CONFIG_HZ_250 is not set
    CONFIG_HZ_300=y
    # CONFIG_HZ_1000 is not set
    CONFIG_HZ=300
    CONFIG_SCHED_HRTICK=y
    CONFIG_KEXEC=y
    # CONFIG_CRASH_DUMP is not set
    CONFIG_KEXEC_JUMP=y
    CONFIG_PHYSICAL_START=0x1000000
    CONFIG_RELOCATABLE=y
    CONFIG_PHYSICAL_ALIGN=0x1000000
    CONFIG_HOTPLUG_CPU=y
    # CONFIG_COMPAT_VDSO is not set
    # CONFIG_CMDLINE_BOOL is not set
    CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
    CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
    CONFIG_USE_PERCPU_NUMA_NODE_ID=y
    # Power management and ACPI options
    CONFIG_ARCH_HIBERNATION_HEADER=y
    CONFIG_SUSPEND=y
    CONFIG_SUSPEND_FREEZER=y
    CONFIG_HIBERNATE_CALLBACKS=y
    CONFIG_HIBERNATION=y
    CONFIG_PM_STD_PARTITION=""
    CONFIG_PM_SLEEP=y
    CONFIG_PM_SLEEP_SMP=y
    CONFIG_PM_RUNTIME=y
    CONFIG_PM=y
    CONFIG_PM_DEBUG=y
    CONFIG_PM_ADVANCED_DEBUG=y
    # CONFIG_PM_TEST_SUSPEND is not set
    CONFIG_CAN_PM_TRACE=y
    # CONFIG_PM_TRACE_RTC is not set
    CONFIG_ACPI=y
    CONFIG_ACPI_SLEEP=y
    CONFIG_ACPI_PROCFS=y
    # CONFIG_ACPI_PROCFS_POWER is not set
    CONFIG_ACPI_EC_DEBUGFS=m
    CONFIG_ACPI_PROC_EVENT=y
    CONFIG_ACPI_AC=m
    CONFIG_ACPI_BATTERY=m
    CONFIG_ACPI_BUTTON=m
    CONFIG_ACPI_VIDEO=m
    CONFIG_ACPI_FAN=m
    CONFIG_ACPI_DOCK=y
    CONFIG_ACPI_PROCESSOR=m
    CONFIG_ACPI_IPMI=m
    CONFIG_ACPI_HOTPLUG_CPU=y
    CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
    CONFIG_ACPI_THERMAL=m
    CONFIG_ACPI_NUMA=y
    # CONFIG_ACPI_CUSTOM_DSDT is not set
    CONFIG_ACPI_BLACKLIST_YEAR=0
    # CONFIG_ACPI_DEBUG is not set
    CONFIG_ACPI_PCI_SLOT=m
    CONFIG_X86_PM_TIMER=y
    CONFIG_ACPI_CONTAINER=m
    CONFIG_ACPI_HOTPLUG_MEMORY=m
    CONFIG_ACPI_SBS=m
    CONFIG_ACPI_HED=m
    CONFIG_ACPI_CUSTOM_METHOD=m
    CONFIG_ACPI_APEI=y
    CONFIG_ACPI_APEI_GHES=m
    CONFIG_ACPI_APEI_PCIEAER=y
    CONFIG_ACPI_APEI_EINJ=m
    CONFIG_ACPI_APEI_ERST_DEBUG=m
    CONFIG_SFI=y
    # CPU Frequency scaling
    CONFIG_CPU_FREQ=y
    CONFIG_CPU_FREQ_TABLE=m
    CONFIG_CPU_FREQ_STAT=m
    CONFIG_CPU_FREQ_STAT_DETAILS=y
    CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
    # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
    # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
    # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
    CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
    CONFIG_CPU_FREQ_GOV_POWERSAVE=m
    CONFIG_CPU_FREQ_GOV_USERSPACE=m
    CONFIG_CPU_FREQ_GOV_ONDEMAND=m
    CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
    # x86 CPU frequency scaling drivers
    CONFIG_X86_PCC_CPUFREQ=m
    CONFIG_X86_ACPI_CPUFREQ=m
    CONFIG_X86_POWERNOW_K8=m
    # CONFIG_X86_SPEEDSTEP_CENTRINO is not set
    CONFIG_X86_P4_CLOCKMOD=m
    # shared options
    CONFIG_X86_SPEEDSTEP_LIB=m
    CONFIG_CPU_IDLE=y
    CONFIG_CPU_IDLE_GOV_LADDER=y
    CONFIG_CPU_IDLE_GOV_MENU=y
    CONFIG_INTEL_IDLE=y
    # Memory power savings
    CONFIG_I7300_IDLE_IOAT_CHANNEL=y
    CONFIG_I7300_IDLE=m
    # Bus options (PCI etc.)
    CONFIG_PCI=y
    CONFIG_PCI_DIRECT=y
    CONFIG_PCI_MMCONFIG=y
    CONFIG_PCI_XEN=y
    CONFIG_PCI_DOMAINS=y
    # CONFIG_PCI_CNB20LE_QUIRK is not set
    CONFIG_DMAR=y
    # CONFIG_DMAR_DEFAULT_ON is not set
    CONFIG_DMAR_FLOPPY_WA=y
    # CONFIG_INTR_REMAP is not set
    CONFIG_PCIEPORTBUS=y
    CONFIG_HOTPLUG_PCI_PCIE=m
    CONFIG_PCIEAER=y
    # CONFIG_PCIE_ECRC is not set
    # CONFIG_PCIEAER_INJECT is not set
    CONFIG_PCIEASPM=y
    # CONFIG_PCIEASPM_DEBUG is not set
    CONFIG_PCIE_PME=y
    CONFIG_ARCH_SUPPORTS_MSI=y
    CONFIG_PCI_MSI=y
    # CONFIG_PCI_DEBUG is not set
    CONFIG_PCI_STUB=m
    CONFIG_XEN_PCIDEV_FRONTEND=m
    CONFIG_HT_IRQ=y
    CONFIG_PCI_IOV=y
    CONFIG_PCI_IOAPIC=y
    CONFIG_PCI_LABEL=y
    CONFIG_ISA_DMA_API=y
    CONFIG_AMD_NB=y
    CONFIG_PCCARD=m
    CONFIG_PCMCIA=m
    CONFIG_PCMCIA_LOAD_CIS=y
    CONFIG_CARDBUS=y
    # PC-card bridges
    CONFIG_YENTA=m
    CONFIG_YENTA_O2=y
    CONFIG_YENTA_RICOH=y
    CONFIG_YENTA_TI=y
    CONFIG_YENTA_ENE_TUNE=y
    CONFIG_YENTA_TOSHIBA=y
    CONFIG_PD6729=m
    CONFIG_I82092=m
    CONFIG_PCCARD_NONSTATIC=y
    CONFIG_HOTPLUG_PCI=m
    CONFIG_HOTPLUG_PCI_FAKE=m
    CONFIG_HOTPLUG_PCI_ACPI=m
    CONFIG_HOTPLUG_PCI_ACPI_IBM=m
    CONFIG_HOTPLUG_PCI_CPCI=y
    CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
    CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
    CONFIG_HOTPLUG_PCI_SHPC=m
    CONFIG_RAPIDIO=y
    CONFIG_RAPIDIO_DISC_TIMEOUT=30
    # CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
    CONFIG_RAPIDIO_TSI57X=y
    CONFIG_RAPIDIO_CPS_XX=y
    CONFIG_RAPIDIO_TSI568=y
    CONFIG_RAPIDIO_CPS_GEN2=y
    CONFIG_RAPIDIO_TSI500=y
    CONFIG_RAPIDIO_DEBUG=y
    # Executable file formats / Emulations
    CONFIG_BINFMT_ELF=y
    CONFIG_COMPAT_BINFMT_ELF=y
    # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
    # CONFIG_HAVE_AOUT is not set
    CONFIG_BINFMT_MISC=y
    CONFIG_IA32_EMULATION=y
    CONFIG_IA32_AOUT=m
    CONFIG_COMPAT=y
    CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
    CONFIG_SYSVIPC_COMPAT=y
    CONFIG_KEYS_COMPAT=y
    CONFIG_HAVE_TEXT_POKE_SMP=y
    CONFIG_NET=y
    CONFIG_COMPAT_NETLINK_MESSAGES=y
    # Networking options
    CONFIG_PACKET=y
    CONFIG_UNIX=y
    CONFIG_XFRM=y
    CONFIG_XFRM_USER=m
    # CONFIG_XFRM_SUB_POLICY is not set
    # CONFIG_XFRM_MIGRATE is not set
    # CONFIG_XFRM_STATISTICS is not set
    CONFIG_XFRM_IPCOMP=m
    CONFIG_NET_KEY=m
    # CONFIG_NET_KEY_MIGRATE is not set
    CONFIG_INET=y
    CONFIG_IP_MULTICAST=y
    CONFIG_IP_ADVANCED_ROUTER=y
    CONFIG_IP_FIB_TRIE_STATS=y
    CONFIG_IP_MULTIPLE_TABLES=y
    CONFIG_IP_ROUTE_MULTIPATH=y
    CONFIG_IP_ROUTE_VERBOSE=y
    CONFIG_IP_ROUTE_CLASSID=y
    # CONFIG_IP_PNP is not set
    CONFIG_NET_IPIP=m
    CONFIG_NET_IPGRE_DEMUX=m
    CONFIG_NET_IPGRE=m
    # CONFIG_NET_IPGRE_BROADCAST is not set
    CONFIG_IP_MROUTE=y
    # CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
    CONFIG_IP_PIMSM_V1=y
    CONFIG_IP_PIMSM_V2=y
    # CONFIG_ARPD is not set
    CONFIG_SYN_COOKIES=y
    CONFIG_INET_AH=m
    CONFIG_INET_ESP=m
    CONFIG_INET_IPCOMP=m
    CONFIG_INET_XFRM_TUNNEL=m
    CONFIG_INET_TUNNEL=m
    CONFIG_INET_XFRM_MODE_TRANSPORT=m
    CONFIG_INET_XFRM_MODE_TUNNEL=m
    CONFIG_INET_XFRM_MODE_BEET=m
    CONFIG_INET_LRO=y
    CONFIG_INET_DIAG=y
    CONFIG_INET_TCP_DIAG=y
    CONFIG_TCP_CONG_ADVANCED=y
    CONFIG_TCP_CONG_BIC=m
    CONFIG_TCP_CONG_CUBIC=y
    CONFIG_TCP_CONG_WESTWOOD=m
    CONFIG_TCP_CONG_HTCP=m
    CONFIG_TCP_CONG_HSTCP=m
    CONFIG_TCP_CONG_HYBLA=m
    CONFIG_TCP_CONG_VEGAS=m
    CONFIG_TCP_CONG_SCALABLE=m
    CONFIG_TCP_CONG_LP=m
    CONFIG_TCP_CONG_VENO=m
    CONFIG_TCP_CONG_YEAH=m
    CONFIG_TCP_CONG_ILLINOIS=m
    CONFIG_DEFAULT_CUBIC=y
    # CONFIG_DEFAULT_RENO is not set
    CONFIG_DEFAULT_TCP_CONG="cubic"
    # CONFIG_TCP_MD5SIG is not set
    CONFIG_IPV6=m
    CONFIG_IPV6_PRIVACY=y
    CONFIG_IPV6_ROUTER_PREF=y
    CONFIG_IPV6_ROUTE_INFO=y
    CONFIG_IPV6_OPTIMISTIC_DAD=y
    CONFIG_INET6_AH=m
    CONFIG_INET6_ESP=m
    CONFIG_INET6_IPCOMP=m
    CONFIG_IPV6_MIP6=m
    CONFIG_INET6_XFRM_TUNNEL=m
    CONFIG_INET6_TUNNEL=m
    CONFIG_INET6_XFRM_MODE_TRANSPORT=m
    CONFIG_INET6_XFRM_MODE_TUNNEL=m
    CONFIG_INET6_XFRM_MODE_BEET=m
    CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
    CONFIG_IPV6_SIT=m
    CONFIG_IPV6_SIT_6RD=y
    CONFIG_IPV6_NDISC_NODETYPE=y
    CONFIG_IPV6_TUNNEL=m
    CONFIG_IPV6_MULTIPLE_TABLES=y
    CONFIG_IPV6_SUBTREES=y
    # CONFIG_IPV6_MROUTE is not set
    CONFIG_NETLABEL=y
    CONFIG_NETWORK_SECMARK=y
    CONFIG_NETWORK_PHY_TIMESTAMPING=y
    CONFIG_NETFILTER=y
    # CONFIG_NETFILTER_DEBUG is not set
    CONFIG_NETFILTER_ADVANCED=y
    CONFIG_BRIDGE_NETFILTER=y
    # Core Netfilter Configuration
    CONFIG_NETFILTER_NETLINK=m
    CONFIG_NETFILTER_NETLINK_QUEUE=m
    CONFIG_NETFILTER_NETLINK_LOG=m
    CONFIG_NF_CONNTRACK=m
    CONFIG_NF_CONNTRACK_MARK=y
    CONFIG_NF_CONNTRACK_SECMARK=y
    CONFIG_NF_CONNTRACK_ZONES=y
    CONFIG_NF_CONNTRACK_EVENTS=y
    CONFIG_NF_CONNTRACK_TIMESTAMP=y
    CONFIG_NF_CT_PROTO_DCCP=m
    CONFIG_NF_CT_PROTO_GRE=m
    CONFIG_NF_CT_PROTO_SCTP=m
    CONFIG_NF_CT_PROTO_UDPLITE=m
    CONFIG_NF_CONNTRACK_AMANDA=m
    CONFIG_NF_CONNTRACK_FTP=m
    CONFIG_NF_CONNTRACK_H323=m
    CONFIG_NF_CONNTRACK_IRC=m
    CONFIG_NF_CONNTRACK_BROADCAST=m
    CONFIG_NF_CONNTRACK_NETBIOS_NS=m
    CONFIG_NF_CONNTRACK_SNMP=m
    CONFIG_NF_CONNTRACK_PPTP=m
    CONFIG_NF_CONNTRACK_SANE=m
    CONFIG_NF_CONNTRACK_SIP=m
    CONFIG_NF_CONNTRACK_TFTP=m
    CONFIG_NF_CT_NETLINK=m
    CONFIG_NETFILTER_TPROXY=m
    CONFIG_NETFILTER_XTABLES=m
    # Xtables combined modules
    CONFIG_NETFILTER_XT_MARK=m
    CONFIG_NETFILTER_XT_CONNMARK=m
    CONFIG_NETFILTER_XT_SET=m
    # Xtables targets
    CONFIG_NETFILTER_XT_TARGET_AUDIT=m
    CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
    CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
    CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
    CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
    CONFIG_NETFILTER_XT_TARGET_CT=m
    CONFIG_NETFILTER_XT_TARGET_DSCP=m
    CONFIG_NETFILTER_XT_TARGET_HL=m
    CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
    CONFIG_NETFILTER_XT_TARGET_LED=m
    CONFIG_NETFILTER_XT_TARGET_MARK=m
    CONFIG_NETFILTER_XT_TARGET_NFLOG=m
    CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
    CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
    CONFIG_NETFILTER_XT_TARGET_RATEEST=m
    CONFIG_NETFILTER_XT_TARGET_TEE=m
    CONFIG_NETFILTER_XT_TARGET_TPROXY=m
    CONFIG_NETFILTER_XT_TARGET_TRACE=m
    CONFIG_NETFILTER_XT_TARGET_SECMARK=m
    CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
    CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
    # Xtables matches
    CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
    CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
    CONFIG_NETFILTER_XT_MATCH_COMMENT=m
    CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
    CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
    CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
    CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
    CONFIG_NETFILTER_XT_MATCH_CPU=m
    CONFIG_NETFILTER_XT_MATCH_DCCP=m
    CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
    CONFIG_NETFILTER_XT_MATCH_DSCP=m
    CONFIG_NETFILTER_XT_MATCH_ESP=m
    CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
    CONFIG_NETFILTER_XT_MATCH_HELPER=m
    CONFIG_NETFILTER_XT_MATCH_HL=m
    CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
    CONFIG_NETFILTER_XT_MATCH_IPVS=m
    CONFIG_NETFILTER_XT_MATCH_LENGTH=m
    CONFIG_NETFILTER_XT_MATCH_LIMIT=m
    CONFIG_NETFILTER_XT_MATCH_MAC=m
    CONFIG_NETFILTER_XT_MATCH_MARK=m
    CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
    CONFIG_NETFILTER_XT_MATCH_OSF=m
    CONFIG_NETFILTER_XT_MATCH_OWNER=m
    CONFIG_NETFILTER_XT_MATCH_POLICY=m
    CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
    CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
    CONFIG_NETFILTER_XT_MATCH_QUOTA=m
    CONFIG_NETFILTER_XT_MATCH_RATEEST=m
    CONFIG_NETFILTER_XT_MATCH_REALM=m
    CONFIG_NETFILTER_XT_MATCH_RECENT=m
    CONFIG_NETFILTER_XT_MATCH_SCTP=m
    CONFIG_NETFILTER_XT_MATCH_SOCKET=m
    CONFIG_NETFILTER_XT_MATCH_STATE=m
    CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
    CONFIG_NETFILTER_XT_MATCH_STRING=m
    CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
    CONFIG_NETFILTER_XT_MATCH_TIME=m
    CONFIG_NETFILTER_XT_MATCH_U32=m
    CONFIG_IP_SET=m
    CONFIG_IP_SET_MAX=256
    CONFIG_IP_SET_BITMAP_IP=m
    CONFIG_IP_SET_BITMAP_IPMAC=m
    CONFIG_IP_SET_BITMAP_PORT=m
    CONFIG_IP_SET_HASH_IP=m
    CONFIG_IP_SET_HASH_IPPORT=m
    CONFIG_IP_SET_HASH_IPPORTIP=m
    CONFIG_IP_SET_HASH_IPPORTNET=m
    CONFIG_IP_SET_HASH_NET=m
    CONFIG_IP_SET_HASH_NETPORT=m
    CONFIG_IP_SET_LIST_SET=m
    CONFIG_IP_VS=m
    # CONFIG_IP_VS_IPV6 is not set
    # CONFIG_IP_VS_DEBUG is not set
    CONFIG_IP_VS_TAB_BITS=12
    # IPVS transport protocol load balancing support
    CONFIG_IP_VS_PROTO_TCP=y
    CONFIG_IP_VS_PROTO_UDP=y
    CONFIG_IP_VS_PROTO_AH_ESP=y
    CONFIG_IP_VS_PROTO_ESP=y
    CONFIG_IP_VS_PROTO_AH=y
    CONFIG_IP_VS_PROTO_SCTP=y
    # IPVS scheduler
    CONFIG_IP_VS_RR=m
    CONFIG_IP_VS_WRR=m
    CONFIG_IP_VS_LC=m
    CONFIG_IP_VS_WLC=m
    CONFIG_IP_VS_LBLC=m
    CONFIG_IP_VS_LBLCR=m
    CONFIG_IP_VS_DH=m
    CONFIG_IP_VS_SH=m
    CONFIG_IP_VS_SED=m
    CONFIG_IP_VS_NQ=m
    # IPVS application helper
    CONFIG_IP_VS_FTP=m
    CONFIG_IP_VS_NFCT=y
    CONFIG_IP_VS_PE_SIP=m
    # IP: Netfilter Configuration
    CONFIG_NF_DEFRAG_IPV4=m
    CONFIG_NF_CONNTRACK_IPV4=m
    CONFIG_NF_CONNTRACK_PROC_COMPAT=y
    CONFIG_IP_NF_QUEUE=m
    CONFIG_IP_NF_IPTABLES=m
    CONFIG_IP_NF_MATCH_AH=m
    CONFIG_IP_NF_MATCH_ECN=m
    CONFIG_IP_NF_MATCH_TTL=m
    CONFIG_IP_NF_FILTER=m
    CONFIG_IP_NF_TARGET_REJECT=m
    CONFIG_IP_NF_TARGET_LOG=m
    CONFIG_IP_NF_TARGET_ULOG=m
    CONFIG_NF_NAT=m
    CONFIG_NF_NAT_NEEDED=y
    CONFIG_IP_NF_TARGET_MASQUERADE=m
    CONFIG_IP_NF_TARGET_NETMAP=m
    CONFIG_IP_NF_TARGET_REDIRECT=m
    CONFIG_NF_NAT_SNMP_BASIC=m
    CONFIG_NF_NAT_PROTO_DCCP=m
    CONFIG_NF_NAT_PROTO_GRE=m
    CONFIG_NF_NAT_PROTO_UDPLITE=m
    CONFIG_NF_NAT_PROTO_SCTP=m
    CONFIG_NF_NAT_FTP=m
    CONFIG_NF_NAT_IRC=m
    CONFIG_NF_NAT_TFTP=m
    CONFIG_NF_NAT_AMANDA=m
    CONFIG_NF_NAT_PPTP=m
    CONFIG_NF_NAT_H323=m
    CONFIG_NF_NAT_SIP=m
    CONFIG_IP_NF_MANGLE=m
    CONFIG_IP_NF_TARGET_CLUSTERIP=m
    CONFIG_IP_NF_TARGET_ECN=m
    CONFIG_IP_NF_TARGET_TTL=m
    CONFIG_IP_NF_RAW=m
    CONFIG_IP_NF_SECURITY=m
    CONFIG_IP_NF_ARPTABLES=m
    CONFIG_IP_NF_ARPFILTER=m
    CONFIG_IP_NF_ARP_MANGLE=m
    # IPv6: Netfilter Configuration
    CONFIG_NF_DEFRAG_IPV6=m
    CONFIG_NF_CONNTRACK_IPV6=m
    CONFIG_IP6_NF_QUEUE=m
    CONFIG_IP6_NF_IPTABLES=m
    CONFIG_IP6_NF_MATCH_AH=m
    CONFIG_IP6_NF_MATCH_EUI64=m
    CONFIG_IP6_NF_MATCH_FRAG=m
    CONFIG_IP6_NF_MATCH_OPTS=m
    CONFIG_IP6_NF_MATCH_HL=m
    CONFIG_IP6_NF_MATCH_IPV6HEADER=m
    CONFIG_IP6_NF_MATCH_MH=m
    CONFIG_IP6_NF_MATCH_RT=m
    CONFIG_IP6_NF_TARGET_HL=m
    CONFIG_IP6_NF_TARGET_LOG=m
    CONFIG_IP6_NF_FILTER=m
    CONFIG_IP6_NF_TARGET_REJECT=m
    CONFIG_IP6_NF_MANGLE=m
    CONFIG_IP6_NF_RAW=m
    CONFIG_IP6_NF_SECURITY=m
    CONFIG_BRIDGE_NF_EBTABLES=m
    CONFIG_BRIDGE_EBT_BROUTE=m
    CONFIG_BRIDGE_EBT_T_FILTER=m
    CONFIG_BRIDGE_EBT_T_NAT=m
    CONFIG_BRIDGE_EBT_802_3=m
    CONFIG_BRIDGE_EBT_AMONG=m
    CONFIG_BRIDGE_EBT_ARP=m
    CONFIG_BRIDGE_EBT_IP=m
    CONFIG_BRIDGE_EBT_IP6=m
    CONFIG_BRIDGE_EBT_LIMIT=m
    CONFIG_BRIDGE_EBT_MARK=m
    CONFIG_BRIDGE_EBT_PKTTYPE=m
    CONFIG_BRIDGE_EBT_STP=m
    CONFIG_BRIDGE_EBT_VLAN=m
    CONFIG_BRIDGE_EBT_ARPREPLY=m
    CONFIG_BRIDGE_EBT_DNAT=m
    CONFIG_BRIDGE_EBT_MARK_T=m
    CONFIG_BRIDGE_EBT_REDIRECT=m
    CONFIG_BRIDGE_EBT_SNAT=m
    CONFIG_BRIDGE_EBT_LOG=m
    CONFIG_BRIDGE_EBT_ULOG=m
    CONFIG_BRIDGE_EBT_NFLOG=m
    CONFIG_IP_DCCP=m
    CONFIG_INET_DCCP_DIAG=m
    # DCCP CCIDs Configuration (EXPERIMENTAL)
    # CONFIG_IP_DCCP_CCID2_DEBUG is not set
    CONFIG_IP_DCCP_CCID3=y
    # CONFIG_IP_DCCP_CCID3_DEBUG is not set
    CONFIG_IP_DCCP_TFRC_LIB=y
    # DCCP Kernel Hacking
    # CONFIG_IP_DCCP_DEBUG is not set
    CONFIG_IP_SCTP=m
    # CONFIG_SCTP_DBG_MSG is not set
    # CONFIG_SCTP_DBG_OBJCNT is not set
    # CONFIG_SCTP_HMAC_NONE is not set
    CONFIG_SCTP_HMAC_SHA1=y
    # CONFIG_SCTP_HMAC_MD5 is not set
    # CONFIG_RDS is not set
    # CONFIG_TIPC is not set
    CONFIG_ATM=m
    CONFIG_ATM_CLIP=m
    # CONFIG_ATM_CLIP_NO_ICMP is not set
    CONFIG_ATM_LANE=m
    CONFIG_ATM_MPOA=m
    CONFIG_ATM_BR2684=m
    # CONFIG_ATM_BR2684_IPFILTER is not set
    CONFIG_L2TP=m
    # CONFIG_L2TP_DEBUGFS is not set
    CONFIG_L2TP_V3=y
    CONFIG_L2TP_IP=m
    CONFIG_L2TP_ETH=m
    CONFIG_STP=m
    CONFIG_BRIDGE=m
    CONFIG_BRIDGE_IGMP_SNOOPING=y
    # CONFIG_NET_DSA is not set
    CONFIG_VLAN_8021Q=m
    # CONFIG_VLAN_8021Q_GVRP is not set
    # CONFIG_DECNET is not set
    CONFIG_LLC=m
    CONFIG_LLC2=m
    CONFIG_IPX=m
    # CONFIG_IPX_INTERN is not set
    CONFIG_ATALK=m
    CONFIG_DEV_APPLETALK=m
    CONFIG_IPDDP=m
    CONFIG_IPDDP_ENCAP=y
    CONFIG_IPDDP_DECAP=y
    # CONFIG_X25 is not set
    # CONFIG_LAPB is not set
    # CONFIG_ECONET is not set
    # CONFIG_WAN_ROUTER is not set
    CONFIG_PHONET=m
    CONFIG_IEEE802154=m
    CONFIG_NET_SCHED=y
    # Queueing/Scheduling
    CONFIG_NET_SCH_CBQ=m
    CONFIG_NET_SCH_HTB=m
    CONFIG_NET_SCH_HFSC=m
    CONFIG_NET_SCH_ATM=m
    CONFIG_NET_SCH_PRIO=m
    CONFIG_NET_SCH_MULTIQ=m
    CONFIG_NET_SCH_RED=m
    CONFIG_NET_SCH_SFB=m
    CONFIG_NET_SCH_SFQ=m
    CONFIG_NET_SCH_TEQL=m
    CONFIG_NET_SCH_TBF=m
    CONFIG_NET_SCH_GRED=m
    CONFIG_NET_SCH_DSMARK=m
    CONFIG_NET_SCH_NETEM=m
    CONFIG_NET_SCH_DRR=m
    CONFIG_NET_SCH_MQPRIO=m
    CONFIG_NET_SCH_CHOKE=m
    CONFIG_NET_SCH_QFQ=m
    CONFIG_NET_SCH_INGRESS=m
    # Classification
    CONFIG_NET_CLS=y
    CONFIG_NET_CLS_BASIC=m
    CONFIG_NET_CLS_TCINDEX=m
    CONFIG_NET_CLS_ROUTE4=m
    CONFIG_NET_CLS_FW=m
    CONFIG_NET_CLS_U32=m
    # CONFIG_CLS_U32_PERF is not set
    # CONFIG_CLS_U32_MARK is not set
    CONFIG_NET_CLS_RSVP=m
    CONFIG_NET_CLS_RSVP6=m
    CONFIG_NET_CLS_FLOW=m
    CONFIG_NET_CLS_CGROUP=y
    # CONFIG_NET_EMATCH is not set
    CONFIG_NET_CLS_ACT=y
    CONFIG_NET_ACT_POLICE=m
    CONFIG_NET_ACT_GACT=m
    CONFIG_GACT_PROB=y
    CONFIG_NET_ACT_MIRRED=m
    CONFIG_NET_ACT_IPT=m
    CONFIG_NET_ACT_NAT=m
    CONFIG_NET_ACT_PEDIT=m
    CONFIG_NET_ACT_SIMP=m
    CONFIG_NET_ACT_SKBEDIT=m
    CONFIG_NET_ACT_CSUM=m
    CONFIG_NET_CLS_IND=y
    CONFIG_NET_SCH_FIFO=y
    # CONFIG_DCB is not set
    CONFIG_DNS_RESOLVER=y
    CONFIG_BATMAN_ADV=m
    # CONFIG_BATMAN_ADV_DEBUG is not set
    CONFIG_RPS=y
    CONFIG_RFS_ACCEL=y
    CONFIG_XPS=y
    CONFIG_HAVE_BPF_JIT=y
    CONFIG_BPF_JIT=y
    # Network testing
    CONFIG_NET_PKTGEN=m
    CONFIG_NET_DROP_MONITOR=y
    # CONFIG_HAMRADIO is not set
    # CONFIG_CAN is not set
    CONFIG_IRDA=m
    # IrDA protocols
    CONFIG_IRLAN=m
    CONFIG_IRNET=m
    CONFIG_IRCOMM=m
    CONFIG_IRDA_ULTRA=y
    # IrDA options
    CONFIG_IRDA_CACHE_LAST_LSAP=y
    CONFIG_IRDA_FAST_RR=y
    # CONFIG_IRDA_DEBUG is not set
    # Infrared-port device drivers
    # SIR device drivers
    CONFIG_IRTTY_SIR=m
    # Dongle support
    CONFIG_DONGLE=y
    CONFIG_ESI_DONGLE=m
    CONFIG_ACTISYS_DONGLE=m
    CONFIG_TEKRAM_DONGLE=m
    CONFIG_TOIM3232_DONGLE=m
    CONFIG_LITELINK_DONGLE=m
    CONFIG_MA600_DONGLE=m
    CONFIG_GIRBIL_DONGLE=m
    CONFIG_MCP2120_DONGLE=m
    CONFIG_OLD_BELKIN_DONGLE=m
    CONFIG_ACT200L_DONGLE=m
    CONFIG_KINGSUN_DONGLE=m
    CONFIG_KSDAZZLE_DONGLE=m
    CONFIG_KS959_DONGLE=m
    # FIR device drivers
    CONFIG_USB_IRDA=m
    CONFIG_SIGMATEL_FIR=m
    CONFIG_NSC_FIR=m
    CONFIG_WINBOND_FIR=m
    CONFIG_SMC_IRCC_FIR=m
    CONFIG_ALI_FIR=m
    CONFIG_VLSI_FIR=m
    CONFIG_VIA_FIR=m
    CONFIG_MCS_FIR=m
    CONFIG_BT=m
    CONFIG_BT_L2CAP=y
    CONFIG_BT_SCO=y
    CONFIG_BT_RFCOMM=m
    CONFIG_BT_RFCOMM_TTY=y
    CONFIG_BT_BNEP=m
    # CONFIG_BT_BNEP_MC_FILTER is not set
    # CONFIG_BT_BNEP_PROTO_FILTER is not set
    # CONFIG_BT_CMTP is not set
    CONFIG_BT_HIDP=m
    # Bluetooth device drivers
    CONFIG_BT_HCIBTUSB=m
    CONFIG_BT_HCIBTSDIO=m
    CONFIG_BT_HCIUART=m
    CONFIG_BT_HCIUART_H4=y
    CONFIG_BT_HCIUART_BCSP=y
    CONFIG_BT_HCIUART_ATH3K=y
    CONFIG_BT_HCIUART_LL=y
    CONFIG_BT_HCIBCM203X=m
    CONFIG_BT_HCIBPA10X=m
    CONFIG_BT_HCIBFUSB=m
    CONFIG_BT_HCIDTL1=m
    CONFIG_BT_HCIBT3C=m
    CONFIG_BT_HCIBLUECARD=m
    CONFIG_BT_HCIBTUART=m
    CONFIG_BT_HCIVHCI=m
    CONFIG_BT_MRVL=m
    CONFIG_BT_MRVL_SDIO=m
    CONFIG_BT_ATH3K=m
    CONFIG_BT_WILINK=m
    CONFIG_AF_RXRPC=m
    # CONFIG_AF_RXRPC_DEBUG is not set
    CONFIG_RXKAD=m
    CONFIG_FIB_RULES=y
    CONFIG_WIRELESS=y
    CONFIG_WIRELESS_EXT=y
    CONFIG_WEXT_CORE=y
    CONFIG_WEXT_PROC=y
    CONFIG_WEXT_SPY=y
    CONFIG_WEXT_PRIV=y
    CONFIG_CFG80211=m
    CONFIG_NL80211_TESTMODE=y
    # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
    # CONFIG_CFG80211_REG_DEBUG is not set
    CONFIG_CFG80211_DEFAULT_PS=y
    # CONFIG_CFG80211_DEBUGFS is not set
    # CONFIG_CFG80211_INTERNAL_REGDB is not set
    CONFIG_CFG80211_WEXT=y
    CONFIG_WIRELESS_EXT_SYSFS=y
    CONFIG_LIB80211=m
    CONFIG_LIB80211_CRYPT_WEP=m
    CONFIG_LIB80211_CRYPT_CCMP=m
    CONFIG_LIB80211_CRYPT_TKIP=m
    # CONFIG_LIB80211_DEBUG is not set
    CONFIG_MAC80211=m
    CONFIG_MAC80211_HAS_RC=y
    CONFIG_MAC80211_RC_MINSTREL=y
    CONFIG_MAC80211_RC_MINSTREL_HT=y
    CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
    CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
    CONFIG_MAC80211_MESH=y
    CONFIG_MAC80211_LEDS=y
    # CONFIG_MAC80211_DEBUGFS is not set
    # CONFIG_MAC80211_DEBUG_MENU is not set
    CONFIG_WIMAX=m
    CONFIG_WIMAX_DEBUG_LEVEL=8
    CONFIG_RFKILL=m
    CONFIG_RFKILL_LEDS=y
    CONFIG_RFKILL_INPUT=y
    CONFIG_RFKILL_REGULATOR=m
    CONFIG_NET_9P=m
    CONFIG_NET_9P_VIRTIO=m
    # CONFIG_NET_9P_DEBUG is not set
    CONFIG_CAIF=m
    # CONFIG_CAIF_DEBUG is not set
    CONFIG_CAIF_NETDEV=m
    CONFIG_CEPH_LIB=m
    # CONFIG_CEPH_LIB_PRETTYDEBUG is not set
    # Device Drivers
    # Generic Driver Options
    CONFIG_UEVENT_HELPER_PATH=""
    CONFIG_DEVTMPFS=y
    # CONFIG_DEVTMPFS_MOUNT is not set
    CONFIG_STANDALONE=y
    CONFIG_PREVENT_FIRMWARE_BUILD=y
    CONFIG_FW_LOADER=y
    CONFIG_FIRMWARE_IN_KERNEL=y
    CONFIG_EXTRA_FIRMWARE=""
    # CONFIG_DEBUG_DRIVER is not set
    # CONFIG_DEBUG_DEVRES is not set
    CONFIG_SYS_HYPERVISOR=y
    CONFIG_CONNECTOR=m
    CONFIG_MTD=m
    # CONFIG_MTD_DEBUG is not set
    CONFIG_MTD_TESTS=m
    CONFIG_MTD_REDBOOT_PARTS=m
    CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
    # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
    # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
    CONFIG_MTD_AR7_PARTS=m
    # User Modules And Translation Layers
    CONFIG_MTD_CHAR=m
    CONFIG_MTD_BLKDEVS=m
    CONFIG_MTD_BLOCK=m
    CONFIG_MTD_BLOCK_RO=m
    CONFIG_FTL=m
    CONFIG_NFTL=m
    CONFIG_NFTL_RW=y
    CONFIG_INFTL=m
    CONFIG_RFD_FTL=m
    CONFIG_SSFDC=m
    # CONFIG_SM_FTL is not set
    CONFIG_MTD_OOPS=m
    CONFIG_MTD_SWAP=m
    # RAM/ROM/Flash chip drivers
    CONFIG_MTD_CFI=m
    CONFIG_MTD_JEDECPROBE=m
    CONFIG_MTD_GEN_PROBE=m
    # CONFIG_MTD_CFI_ADV_OPTIONS is not set
    CONFIG_MTD_MAP_BANK_WIDTH_1=y
    CONFIG_MTD_MAP_BANK_WIDTH_2=y
    CONFIG_MTD_MAP_BANK_WIDTH_4=y
    # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
    # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
    # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
    CONFIG_MTD_CFI_I1=y
    CONFIG_MTD_CFI_I2=y
    # CONFIG_MTD_CFI_I4 is not set
    # CONFIG_MTD_CFI_I8 is not set
    CONFIG_MTD_CFI_INTELEXT=m
    CONFIG_MTD_CFI_AMDSTD=m
    CONFIG_MTD_CFI_STAA=m
    CONFIG_MTD_CFI_UTIL=m
    CONFIG_MTD_RAM=m
    CONFIG_MTD_ROM=m
    CONFIG_MTD_ABSENT=m
    # Mapping drivers for chip access
    CONFIG_MTD_COMPLEX_MAPPINGS=y
    # CONFIG_MTD_PHYSMAP is not set
    CONFIG_MTD_SC520CDP=m
    CONFIG_MTD_NETSC520=m
    CONFIG_MTD_TS5500=m
    # CONFIG_MTD_SBC_GXX is not set
    # CONFIG_MTD_AMD76XROM is not set
    # CONFIG_MTD_ICHXROM is not set
    # CONFIG_MTD_ESB2ROM is not set
    # CONFIG_MTD_CK804XROM is not set
    CONFIG_MTD_SCB2_FLASH=m
    # CONFIG_MTD_NETtel is not set
    # CONFIG_MTD_L440GX is not set
    CONFIG_MTD_PCI=m
    # CONFIG_MTD_PCMCIA is not set
    # CONFIG_MTD_GPIO_ADDR is not set
    # CONFIG_MTD_INTEL_VR_NOR is not set
    CONFIG_MTD_PLATRAM=m
    # CONFIG_MTD_LATCH_ADDR is not set
    # Self-contained MTD device drivers
    CONFIG_MTD_PMC551=m
    # CONFIG_MTD_PMC551_BUGFIX is not set
    # CONFIG_MTD_PMC551_DEBUG is not set
    # CONFIG_MTD_DATAFLASH is not set
    # CONFIG_MTD_M25P80 is not set
    # CONFIG_MTD_SST25L is not set
    # CONFIG_MTD_SLRAM is not set
    CONFIG_MTD_PHRAM=m
    CONFIG_MTD_MTDRAM=m
    CONFIG_MTDRAM_TOTAL_SIZE=4096
    CONFIG_MTDRAM_ERASE_SIZE=128
    CONFIG_MTD_BLOCK2MTD=m
    # Disk-On-Chip Device Drivers
    # CONFIG_MTD_DOC2000 is not set
    # CONFIG_MTD_DOC2001 is not set
    # CONFIG_MTD_DOC2001PLUS is not set
    CONFIG_MTD_NAND_ECC=m
    CONFIG_MTD_NAND_ECC_SMC=y
    CONFIG_MTD_NAND=m
    # CONFIG_MTD_NAND_VERIFY_WRITE is not set
    # CONFIG_MTD_NAND_ECC_BCH is not set
    CONFIG_MTD_SM_COMMON=m
    # CONFIG_MTD_NAND_MUSEUM_IDS is not set
    # CONFIG_MTD_NAND_DENALI is not set
    CONFIG_MTD_NAND_IDS=m
    CONFIG_MTD_NAND_RICOH=m
    CONFIG_MTD_NAND_DISKONCHIP=m
    # CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
    CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
    # CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
    # CONFIG_MTD_NAND_CAFE is not set
    CONFIG_MTD_NAND_NANDSIM=m
    # CONFIG_MTD_NAND_PLATFORM is not set
    CONFIG_MTD_ALAUDA=m
    # CONFIG_MTD_ONENAND is not set
    # LPDDR flash memory drivers
    CONFIG_MTD_LPDDR=m
    CONFIG_MTD_QINFO_PROBE=m
    CONFIG_MTD_UBI=m
    CONFIG_MTD_UBI_WL_THRESHOLD=4096
    CONFIG_MTD_UBI_BEB_RESERVE=1
    # CONFIG_MTD_UBI_GLUEBI is not set
    # CONFIG_MTD_UBI_DEBUG is not set
    CONFIG_PARPORT=m
    CONFIG_PARPORT_PC=m
    CONFIG_PARPORT_SERIAL=m
    CONFIG_PARPORT_PC_FIFO=y
    CONFIG_PARPORT_PC_SUPERIO=y
    CONFIG_PARPORT_PC_PCMCIA=m
    # CONFIG_PARPORT_GSC is not set
    CONFIG_PARPORT_AX88796=m
    CONFIG_PARPORT_1284=y
    CONFIG_PARPORT_NOT_PC=y
    CONFIG_PNP=y
    # CONFIG_PNP_DEBUG_MESSAGES is not set
    # Protocols
    CONFIG_PNPACPI=y
    CONFIG_BLK_DEV=y
    CONFIG_BLK_DEV_FD=m
    # CONFIG_PARIDE is not set
    CONFIG_BLK_CPQ_DA=m
    CONFIG_BLK_CPQ_CISS_DA=m
    # CONFIG_CISS_SCSI_TAPE is not set
    CONFIG_BLK_DEV_DAC960=m
    # CONFIG_BLK_DEV_UMEM is not set
    # CONFIG_BLK_DEV_COW_COMMON is not set
    CONFIG_BLK_DEV_LOOP=m
    CONFIG_BLK_DEV_CRYPTOLOOP=m
    CONFIG_BLK_DEV_DRBD=m
    # CONFIG_DRBD_FAULT_INJECTION is not set
    CONFIG_BLK_DEV_NBD=m
    CONFIG_BLK_DEV_OSD=m
    CONFIG_BLK_DEV_SX8=m
    # CONFIG_BLK_DEV_UB is not set
    CONFIG_BLK_DEV_RAM=m
    CONFIG_BLK_DEV_RAM_COUNT=16
    CONFIG_BLK_DEV_RAM_SIZE=16384
    # CONFIG_BLK_DEV_XIP is not set
    CONFIG_CDROM_PKTCDVD=m
    CONFIG_CDROM_PKTCDVD_BUFFERS=8
    # CONFIG_CDROM_PKTCDVD_WCACHE is not set
    CONFIG_ATA_OVER_ETH=m
    CONFIG_XEN_BLKDEV_FRONTEND=m
    CONFIG_XEN_BLKDEV_BACKEND=m
    CONFIG_VIRTIO_BLK=m
    # CONFIG_BLK_DEV_HD is not set
    CONFIG_BLK_DEV_RBD=m
    CONFIG_SENSORS_LIS3LV02D=m
    CONFIG_MISC_DEVICES=y
    CONFIG_AD525X_DPOT=m
    CONFIG_AD525X_DPOT_I2C=m
    CONFIG_AD525X_DPOT_SPI=m
    # CONFIG_IBM_ASM is not set
    CONFIG_PHANTOM=m
    CONFIG_INTEL_MID_PTI=m
    CONFIG_SGI_IOC4=m
    CONFIG_TIFM_CORE=m
    CONFIG_TIFM_7XX1=m
    CONFIG_ICS932S401=m
    CONFIG_ENCLOSURE_SERVICES=m
    CONFIG_CS5535_MFGPT=m
    CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
    CONFIG_CS5535_CLOCK_EVENT_SRC=m
    CONFIG_HP_ILO=m
    CONFIG_APDS9802ALS=m
    CONFIG_ISL29003=m
    CONFIG_ISL29020=m
    CONFIG_SENSORS_TSL2550=m
    CONFIG_SENSORS_BH1780=m
    CONFIG_SENSORS_BH1770=m
    CONFIG_SENSORS_APDS990X=m
    CONFIG_HMC6352=m
    CONFIG_DS1682=m
    CONFIG_TI_DAC7512=m
    CONFIG_VMWARE_BALLOON=m
    CONFIG_BMP085=m
    CONFIG_PCH_PHUB=m
    CONFIG_C2PORT=m
    CONFIG_C2PORT_DURAMAR_2150=m
    # EEPROM support
    CONFIG_EEPROM_AT24=m
    CONFIG_EEPROM_AT25=m
    CONFIG_EEPROM_LEGACY=m
    CONFIG_EEPROM_MAX6875=m
    CONFIG_EEPROM_93CX6=m
    CONFIG_CB710_CORE=m
    # CONFIG_CB710_DEBUG is not set
    CONFIG_CB710_DEBUG_ASSUMPTIONS=y
    CONFIG_IWMC3200TOP=m
    # CONFIG_IWMC3200TOP_DEBUG is not set
    # CONFIG_IWMC3200TOP_DEBUGFS is not set
    # Texas Instruments shared transport line discipline
    CONFIG_TI_ST=m
    CONFIG_SENSORS_LIS3_I2C=m
    CONFIG_HAVE_IDE=y
    CONFIG_IDE=m
    # Please see Documentation/ide/ide.txt for help/info on IDE drives
    CONFIG_IDE_XFER_MODE=y
    CONFIG_IDE_TIMINGS=y
    CONFIG_IDE_ATAPI=y
    # CONFIG_BLK_DEV_IDE_SATA is not set
    CONFIG_IDE_GD=m
    CONFIG_IDE_GD_ATA=y
    CONFIG_IDE_GD_ATAPI=y
    CONFIG_BLK_DEV_IDECS=m
    CONFIG_BLK_DEV_DELKIN=m
    CONFIG_BLK_DEV_IDECD=m
    CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
    CONFIG_BLK_DEV_IDETAPE=m
    CONFIG_BLK_DEV_IDEACPI=y
    # CONFIG_IDE_TASK_IOCTL is not set
    CONFIG_IDE_PROC_FS=y
    # IDE chipset support/bugfixes
    CONFIG_IDE_GENERIC=m
    CONFIG_BLK_DEV_PLATFORM=m
    CONFIG_BLK_DEV_CMD640=m
    # CONFIG_BLK_DEV_CMD640_ENHANCED is not set
    CONFIG_BLK_DEV_IDEPNP=m
    CONFIG_BLK_DEV_IDEDMA_SFF=y
    # PCI IDE chipsets support
    CONFIG_BLK_DEV_IDEPCI=y
    # CONFIG_BLK_DEV_OFFBOARD is not set
    CONFIG_BLK_DEV_GENERIC=m
    CONFIG_BLK_DEV_OPTI621=m
    CONFIG_BLK_DEV_RZ1000=m
    CONFIG_BLK_DEV_IDEDMA_PCI=y
    CONFIG_BLK_DEV_AEC62XX=m
    CONFIG_BLK_DEV_ALI15X3=m
    CONFIG_BLK_DEV_AMD74XX=m
    CONFIG_BLK_DEV_ATIIXP=m
    CONFIG_BLK_DEV_CMD64X=m
    CONFIG_BLK_DEV_TRIFLEX=m
    CONFIG_BLK_DEV_CS5520=m
    CONFIG_BLK_DEV_CS5530=m
    CONFIG_BLK_DEV_HPT366=m
    CONFIG_BLK_DEV_JMICRON=m
    CONFIG_BLK_DEV_SC1200=m
    CONFIG_BLK_DEV_PIIX=m
    CONFIG_BLK_DEV_IT8172=m
    CONFIG_BLK_DEV_IT8213=m
    CONFIG_BLK_DEV_IT821X=m
    CONFIG_BLK_DEV_NS87415=m
    CONFIG_BLK_DEV_PDC202XX_OLD=m
    CONFIG_BLK_DEV_PDC202XX_NEW=m
    CONFIG_BLK_DEV_SVWKS=m
    CONFIG_BLK_DEV_SIIMAGE=m
    CONFIG_BLK_DEV_SIS5513=m
    CONFIG_BLK_DEV_SLC90E66=m
    CONFIG_BLK_DEV_TRM290=m
    CONFIG_BLK_DEV_VIA82CXXX=m
    CONFIG_BLK_DEV_TC86C001=m
    CONFIG_BLK_DEV_IDEDMA=y
    # SCSI device support
    CONFIG_SCSI_MOD=m
    CONFIG_RAID_ATTRS=m
    CONFIG_SCSI=m
    CONFIG_SCSI_DMA=y
    CONFIG_SCSI_TGT=m
    CONFIG_SCSI_NETLINK=y
    CONFIG_SCSI_PROC_FS=y
    # SCSI support type (disk, tape, CD-ROM)
    CONFIG_BLK_DEV_SD=m
    CONFIG_CHR_DEV_ST=m
    CONFIG_CHR_DEV_OSST=m
    CONFIG_BLK_DEV_SR=m
    CONFIG_BLK_DEV_SR_VENDOR=y
    CONFIG_CHR_DEV_SG=m
    CONFIG_CHR_DEV_SCH=m
    CONFIG_SCSI_ENCLOSURE=m
    CONFIG_SCSI_MULTI_LUN=y
    # CONFIG_SCSI_CONSTANTS is not set
    # CONFIG_SCSI_LOGGING is not set
    # CONFIG_SCSI_SCAN_ASYNC is not set
    CONFIG_SCSI_WAIT_SCAN=m
    # SCSI Transports
    CONFIG_SCSI_SPI_ATTRS=m
    CONFIG_SCSI_FC_ATTRS=m
    # CONFIG_SCSI_FC_TGT_ATTRS is not set
    CONFIG_SCSI_ISCSI_ATTRS=m
    CONFIG_SCSI_SAS_ATTRS=m
    CONFIG_SCSI_SAS_LIBSAS=m
    CONFIG_SCSI_SAS_ATA=y
    CONFIG_SCSI_SAS_HOST_SMP=y
    CONFIG_SCSI_SRP_ATTRS=m
    CONFIG_SCSI_SRP_TGT_ATTRS=y
    CONFIG_SCSI_LOWLEVEL=y
    CONFIG_ISCSI_TCP=m
    CONFIG_ISCSI_BOOT_SYSFS=m
    CONFIG_SCSI_CXGB3_ISCSI=m
    CONFIG_SCSI_CXGB4_ISCSI=m
    CONFIG_SCSI_BNX2_ISCSI=m
    CONFIG_SCSI_BNX2X_FCOE=m
    CONFIG_BE2ISCSI=m
    CONFIG_BLK_DEV_3W_XXXX_RAID=m
    CONFIG_SCSI_HPSA=m
    CONFIG_SCSI_3W_9XXX=m
    CONFIG_SCSI_3W_SAS=m
    CONFIG_SCSI_ACARD=m
    CONFIG_SCSI_AACRAID=m
    CONFIG_SCSI_AIC7XXX=m
    CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
    CONFIG_AIC7XXX_RESET_DELAY_MS=15000
    # CONFIG_AIC7XXX_DEBUG_ENABLE is not set
    CONFIG_AIC7XXX_DEBUG_MASK=0
    CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
    # CONFIG_SCSI_AIC7XXX_OLD is not set
    CONFIG_SCSI_AIC79XX=m
    CONFIG_AIC79XX_CMDS_PER_DEVICE=32
    CONFIG_AIC79XX_RESET_DELAY_MS=15000
    # CONFIG_AIC79XX_DEBUG_ENABLE is not set
    CONFIG_AIC79XX_DEBUG_MASK=0
    CONFIG_AIC79XX_REG_PRETTY_PRINT=y
    CONFIG_SCSI_AIC94XX=m
    # CONFIG_AIC94XX_DEBUG is not set
    CONFIG_SCSI_MVSAS=m
    # CONFIG_SCSI_MVSAS_DEBUG is not set
    CONFIG_SCSI_DPT_I2O=m
    CONFIG_SCSI_ADVANSYS=m
    CONFIG_SCSI_ARCMSR=m
    CONFIG_SCSI_ARCMSR_AER=y
    CONFIG_MEGARAID_NEWGEN=y
    CONFIG_MEGARAID_MM=m
    CONFIG_MEGARAID_MAILBOX=m
    CONFIG_MEGARAID_LEGACY=m
    CONFIG_MEGARAID_SAS=m
    CONFIG_SCSI_MPT2SAS=m
    CONFIG_SCSI_MPT2SAS_MAX_SGE=128
    # CONFIG_SCSI_MPT2SAS_LOGGING is not set
    CONFIG_SCSI_HPTIOP=m
    CONFIG_SCSI_BUSLOGIC=m
    CONFIG_VMWARE_PVSCSI=m
    CONFIG_LIBFC=m
    CONFIG_LIBFCOE=m
    CONFIG_FCOE=m
    CONFIG_FCOE_FNIC=m
    CONFIG_SCSI_DMX3191D=m
    CONFIG_SCSI_EATA=m
    # CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
    # CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
    CONFIG_SCSI_EATA_MAX_TAGS=16
    CONFIG_SCSI_FUTURE_DOMAIN=m
    CONFIG_SCSI_GDTH=m
    CONFIG_SCSI_ISCI=m
    CONFIG_SCSI_IPS=m
    CONFIG_SCSI_INITIO=m
    CONFIG_SCSI_INIA100=m
    CONFIG_SCSI_PPA=m
    CONFIG_SCSI_IMM=m
    # CONFIG_SCSI_IZIP_EPP16 is not set
    # CONFIG_SCSI_IZIP_SLOW_CTR is not set
    CONFIG_SCSI_STEX=m
    CONFIG_SCSI_SYM53C8XX_2=m
    CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
    CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
    CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
    CONFIG_SCSI_SYM53C8XX_MMIO=y
    CONFIG_SCSI_IPR=m
    # CONFIG_SCSI_IPR_TRACE is not set
    # CONFIG_SCSI_IPR_DUMP is not set
    CONFIG_SCSI_QLOGIC_1280=m
    CONFIG_SCSI_QLA_FC=m
    CONFIG_SCSI_QLA_ISCSI=m
    CONFIG_SCSI_LPFC=m
    # CONFIG_SCSI_LPFC_DEBUG_FS is not set
    CONFIG_SCSI_DC395x=m
    CONFIG_SCSI_DC390T=m
    # CONFIG_SCSI_DEBUG is not set
    CONFIG_SCSI_PMCRAID=m
    CONFIG_SCSI_PM8001=m
    CONFIG_SCSI_SRP=m
    CONFIG_SCSI_BFA_FC=m
    CONFIG_SCSI_LOWLEVEL_PCMCIA=y
    CONFIG_PCMCIA_AHA152X=m
    CONFIG_PCMCIA_FDOMAIN=m
    CONFIG_PCMCIA_QLOGIC=m
    CONFIG_PCMCIA_SYM53C500=m
    CONFIG_SCSI_DH=m
    CONFIG_SCSI_DH_RDAC=m
    CONFIG_SCSI_DH_HP_SW=m
    CONFIG_SCSI_DH_EMC=m
    CONFIG_SCSI_DH_ALUA=m
    CONFIG_SCSI_OSD_INITIATOR=m
    CONFIG_SCSI_OSD_ULD=m
    CONFIG_SCSI_OSD_DPRINT_SENSE=0
    # CONFIG_SCSI_OSD_DEBUG is not set
    CONFIG_ATA=m
    # CONFIG_ATA_NONSTANDARD is not set
    CONFIG_ATA_VERBOSE_ERROR=y
    CONFIG_ATA_ACPI=y
    CONFIG_SATA_PMP=y
    # Controllers with non-SFF native interface
    CONFIG_SATA_AHCI=m
    CONFIG_SATA_AHCI_PLATFORM=m
    CONFIG_SATA_INIC162X=m
    CONFIG_SATA_ACARD_AHCI=m
    CONFIG_SATA_SIL24=m
    CONFIG_ATA_SFF=y
    # SFF controllers with custom DMA interface
    CONFIG_PDC_ADMA=m
    CONFIG_SATA_QSTOR=m
    CONFIG_SATA_SX4=m
    CONFIG_ATA_BMDMA=y
    # SATA SFF controllers with BMDMA
    CONFIG_ATA_PIIX=m
    CONFIG_SATA_MV=m
    CONFIG_SATA_NV=m
    CONFIG_SATA_PROMISE=m
    CONFIG_SATA_SIL=m
    CONFIG_SATA_SIS=m
    CONFIG_SATA_SVW=m
    CONFIG_SATA_ULI=m
    CONFIG_SATA_VIA=m
    CONFIG_SATA_VITESSE=m
    # PATA SFF controllers with BMDMA
    CONFIG_PATA_ALI=m
    CONFIG_PATA_AMD=m
    CONFIG_PATA_ARASAN_CF=m
    CONFIG_PATA_ARTOP=m
    CONFIG_PATA_ATIIXP=m
    CONFIG_PATA_ATP867X=m
    CONFIG_PATA_CMD64X=m
    CONFIG_PATA_CS5520=m
    CONFIG_PATA_CS5530=m
    CONFIG_PATA_CS5536=m
    CONFIG_PATA_CYPRESS=m
    CONFIG_PATA_EFAR=m
    CONFIG_PATA_HPT366=m
    CONFIG_PATA_HPT37X=m
    CONFIG_PATA_HPT3X2N=m
    CONFIG_PATA_HPT3X3=m
    # CONFIG_PATA_HPT3X3_DMA is not set
    CONFIG_PATA_IT8213=m
    CONFIG_PATA_IT821X=m
    CONFIG_PATA_JMICRON=m
    CONFIG_PATA_MARVELL=m
    CONFIG_PATA_NETCELL=m
    CONFIG_PATA_NINJA32=m
    CONFIG_PATA_NS87415=m
    CONFIG_PATA_OLDPIIX=m
    CONFIG_PATA_OPTIDMA=m
    CONFIG_PATA_PDC2027X=m
    CONFIG_PATA_PDC_OLD=m
    CONFIG_PATA_RADISYS=m
    CONFIG_PATA_RDC=m
    CONFIG_PATA_SC1200=m
    CONFIG_PATA_SCH=m
    CONFIG_PATA_SERVERWORKS=m
    CONFIG_PATA_SIL680=m
    CONFIG_PATA_SIS=m
    CONFIG_PATA_TOSHIBA=m
    CONFIG_PATA_TRIFLEX=m
    CONFIG_PATA_VIA=m
    CONFIG_PATA_WINBOND=m
    # PIO-only SFF controllers
    CONFIG_PATA_CMD640_PCI=m
    CONFIG_PATA_MPIIX=m
    CONFIG_PATA_NS87410=m
    CONFIG_PATA_OPTI=m
    CONFIG_PATA_PCMCIA=m
    CONFIG_PATA_RZ1000=m
    # Generic fallback / legacy drivers
    CONFIG_PATA_ACPI=m
    CONFIG_ATA_GENERIC=m
    CONFIG_PATA_LEGACY=m
    CONFIG_MD=y
    CONFIG_BLK_DEV_MD=m
    CONFIG_MD_LINEAR=m
    CONFIG_MD_RAID0=m
    CONFIG_MD_RAID1=m
    CONFIG_MD_RAID10=m
    CONFIG_MD_RAID456=m
    # CONFIG_MULTICORE_RAID456 is not set
    CONFIG_MD_MULTIPATH=m
    CONFIG_MD_FAULTY=m
    CONFIG_BLK_DEV_DM=m
    # CONFIG_DM_DEBUG is not set
    CONFIG_DM_CRYPT=m
    CONFIG_DM_SNAPSHOT=m
    CONFIG_DM_MIRROR=m
    CONFIG_DM_RAID=m
    CONFIG_DM_LOG_USERSPACE=m
    CONFIG_DM_ZERO=m
    CONFIG_DM_MULTIPATH=m
    CONFIG_DM_MULTIPATH_QL=m
    CONFIG_DM_MULTIPATH_ST=m
    CONFIG_DM_DELAY=m
    CONFIG_DM_UEVENT=y
    CONFIG_DM_FLAKEY=m
    CONFIG_TARGET_CORE=m
    CONFIG_TCM_IBLOCK=m
    CONFIG_TCM_FILEIO=m
    CONFIG_TCM_PSCSI=m
    CONFIG_LOOPBACK_TARGET=m
    # CONFIG_LOOPBACK_TARGET_CDB_DEBUG is not set
    CONFIG_TCM_FC=m
    CONFIG_FUSION=y
    CONFIG_FUSION_SPI=m
    CONFIG_FUSION_FC=m
    CONFIG_FUSION_SAS=m
    CONFIG_FUSION_MAX_SGE=128
    CONFIG_FUSION_CTL=m
    # CONFIG_FUSION_LOGGING is not set
    # IEEE 1394 (FireWire) support
    CONFIG_FIREWIRE=m
    CONFIG_FIREWIRE_OHCI=m
    CONFIG_FIREWIRE_OHCI_DEBUG=y
    CONFIG_FIREWIRE_SBP2=m
    CONFIG_FIREWIRE_NET=m
    CONFIG_FIREWIRE_NOSY=m
    CONFIG_I2O=m
    CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
    CONFIG_I2O_EXT_ADAPTEC=y
    CONFIG_I2O_EXT_ADAPTEC_DMA64=y
    CONFIG_I2O_CONFIG=m
    CONFIG_I2O_CONFIG_OLD_IOCTL=y
    CONFIG_I2O_BUS=m
    CONFIG_I2O_BLOCK=m
    CONFIG_I2O_SCSI=m
    CONFIG_I2O_PROC=m
    CONFIG_MACINTOSH_DRIVERS=y
    CONFIG_MAC_EMUMOUSEBTN=y
    CONFIG_NETDEVICES=y
    CONFIG_IFB=m
    CONFIG_DUMMY=m
    CONFIG_BONDING=m
    CONFIG_MACVLAN=m
    CONFIG_MACVTAP=m
    CONFIG_EQUALIZER=m
    CONFIG_TUN=m
    CONFIG_VETH=m
    CONFIG_NET_SB1000=m
    # CONFIG_ARCNET is not set
    CONFIG_MII=m
    CONFIG_PHYLIB=m
    # MII PHY device drivers
    CONFIG_MARVELL_PHY=m
    CONFIG_DAVICOM_PHY=m
    CONFIG_QSEMI_PHY=m
    CONFIG_LXT_PHY=m
    CONFIG_CICADA_PHY=m
    CONFIG_VITESSE_PHY=m
    CONFIG_SMSC_PHY=m
    CONFIG_BROADCOM_PHY=m
    CONFIG_ICPLUS_PHY=m
    CONFIG_REALTEK_PHY=m
    CONFIG_NATIONAL_PHY=m
    CONFIG_STE10XP=m
    CONFIG_LSI_ET1011C_PHY=m
    CONFIG_MICREL_PHY=m
    # CONFIG_MDIO_BITBANG is not set
    CONFIG_NET_ETHERNET=y
    CONFIG_HAPPYMEAL=m
    CONFIG_SUNGEM=m
    CONFIG_CASSINI=m
    CONFIG_NET_VENDOR_3COM=y
    CONFIG_VORTEX=m
    CONFIG_TYPHOON=m
    CONFIG_ENC28J60=m
    # CONFIG_ENC28J60_WRITEVERIFY is not set
    CONFIG_ETHOC=m
    CONFIG_DNET=m
    CONFIG_NET_TULIP=y
    CONFIG_DE2104X=m
    CONFIG_DE2104X_DSL=0
    CONFIG_TULIP=m
    # CONFIG_TULIP_MWI is not set
    # CONFIG_TULIP_MMIO is not set
    # CONFIG_TULIP_NAPI is not set
    CONFIG_DE4X5=m
    CONFIG_WINBOND_840=m
    CONFIG_DM9102=m
    CONFIG_ULI526X=m
    CONFIG_PCMCIA_XIRCOM=m
    CONFIG_HP100=m
    # CONFIG_IBM_NEW_EMAC_ZMII is not set
    # CONFIG_IBM_NEW_EMAC_RGMII is not set
    # CONFIG_IBM_NEW_EMAC_TAH is not set
    # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
    # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
    # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
    # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
    CONFIG_NET_PCI=y
    CONFIG_PCNET32=m
    CONFIG_AMD8111_ETH=m
    CONFIG_ADAPTEC_STARFIRE=m
    CONFIG_KSZ884X_PCI=m
    CONFIG_B44=m
    CONFIG_B44_PCI_AUTOSELECT=y
    CONFIG_B44_PCICORE_AUTOSELECT=y
    CONFIG_B44_PCI=y
    CONFIG_FORCEDETH=m
    CONFIG_E100=m
    CONFIG_FEALNX=m
    CONFIG_NATSEMI=m
    CONFIG_NE2K_PCI=m
    CONFIG_8139CP=m
    CONFIG_8139TOO=m
    # CONFIG_8139TOO_PIO is not set
    CONFIG_8139TOO_TUNE_TWISTER=y
    CONFIG_8139TOO_8129=y
    # CONFIG_8139_OLD_RX_RESET is not set
    CONFIG_R6040=m
    CONFIG_SIS900=m
    CONFIG_EPIC100=m
    CONFIG_SMSC9420=m
    CONFIG_SUNDANCE=m
    # CONFIG_SUNDANCE_MMIO is not set
    CONFIG_TLAN=m
    CONFIG_KS8842=m
    CONFIG_KS8851=m
    CONFIG_KS8851_MLL=m
    CONFIG_VIA_RHINE=m
    # CONFIG_VIA_RHINE_MMIO is not set
    CONFIG_SC92031=m
    CONFIG_NET_POCKET=y
    CONFIG_ATP=m
    CONFIG_DE600=m
    CONFIG_DE620=m
    CONFIG_ATL2=m
    CONFIG_NETDEV_1000=y
    CONFIG_ACENIC=m
    # CONFIG_ACENIC_OMIT_TIGON_I is not set
    CONFIG_DL2K=m
    CONFIG_E1000=m
    CONFIG_E1000E=m
    CONFIG_IP1000=m
    CONFIG_IGB=m
    CONFIG_IGB_DCA=y
    CONFIG_IGBVF=m
    CONFIG_NS83820=m
    CONFIG_HAMACHI=m
    CONFIG_YELLOWFIN=m
    CONFIG_R8169=m
    CONFIG_SIS190=m
    CONFIG_SKGE=m
    # CONFIG_SKGE_DEBUG is not set
    CONFIG_SKY2=m
    # CONFIG_SKY2_DEBUG is not set
    CONFIG_VIA_VELOCITY=m
    CONFIG_TIGON3=m
    CONFIG_BNX2=m
    CONFIG_CNIC=m
    CONFIG_QLA3XXX=m
    CONFIG_ATL1=m
    CONFIG_ATL1E=m
    CONFIG_ATL1C=m
    CONFIG_JME=m
    CONFIG_STMMAC_ETH=m
    # CONFIG_STMMAC_DA is not set
    CONFIG_STMMAC_DUAL_MAC=y
    CONFIG_PCH_GBE=m
    CONFIG_NETDEV_10000=y
    CONFIG_MDIO=m
    CONFIG_CHELSIO_T1=m
    CONFIG_CHELSIO_T1_1G=y
    CONFIG_CHELSIO_T3=m
    CONFIG_CHELSIO_T4=m
    CONFIG_CHELSIO_T4VF=m
    CONFIG_ENIC=m
    CONFIG_IXGBE=m
    CONFIG_IXGBE_DCA=y
    CONFIG_IXGBEVF=m
    CONFIG_IXGB=m
    CONFIG_S2IO=m
    CONFIG_VXGE=m
    # CONFIG_VXGE_DEBUG_TRACE_ALL is not set
    CONFIG_MYRI10GE=m
    CONFIG_MYRI10GE_DCA=y
    CONFIG_NETXEN_NIC=m
    CONFIG_NIU=m
    CONFIG_MLX4_EN=m
    CONFIG_MLX4_CORE=m
    CONFIG_MLX4_DEBUG=y
    CONFIG_TEHUTI=m
    CONFIG_BNX2X=m
    CONFIG_QLCNIC=m
    CONFIG_QLGE=m
    CONFIG_BNA=m
    CONFIG_SFC=m
    CONFIG_SFC_MTD=y
    CONFIG_BE2NET=m
    # CONFIG_TR is not set
    CONFIG_WLAN=y
    CONFIG_PCMCIA_RAYCS=m
    CONFIG_LIBERTAS_THINFIRM=m
    # CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
    CONFIG_LIBERTAS_THINFIRM_USB=m
    CONFIG_AIRO=m
    CONFIG_ATMEL=m
    CONFIG_PCI_ATMEL=m
    CONFIG_PCMCIA_ATMEL=m
    CONFIG_AT76C50X_USB=m
    CONFIG_AIRO_CS=m
    CONFIG_PCMCIA_WL3501=m
    CONFIG_PRISM54=m
    CONFIG_USB_ZD1201=m
    CONFIG_USB_NET_RNDIS_WLAN=m
    CONFIG_RTL8180=m
    CONFIG_RTL8187=m
    CONFIG_RTL8187_LEDS=y
    CONFIG_ADM8211=m
    # CONFIG_MAC80211_HWSIM is not set
    CONFIG_MWL8K=m
    CONFIG_ATH_COMMON=m
    # CONFIG_ATH_DEBUG is not set
    CONFIG_ATH5K=m
    # CONFIG_ATH5K_DEBUG is not set
    # CONFIG_ATH5K_TRACER is not set
    CONFIG_ATH5K_PCI=y
    CONFIG_ATH9K_HW=m
    CONFIG_ATH9K_COMMON=m
    CONFIG_ATH9K=m
    CONFIG_ATH9K_PCI=y
    CONFIG_ATH9K_AHB=y
    # CONFIG_ATH9K_DEBUGFS is not set
    CONFIG_ATH9K_RATE_CONTROL=y
    CONFIG_ATH9K_HTC=m
    # CONFIG_ATH9K_HTC_DEBUGFS is not set
    CONFIG_CARL9170=m
    CONFIG_CARL9170_LEDS=y
    CONFIG_CARL9170_WPC=y
    CONFIG_B43=m
    CONFIG_B43_PCI_AUTOSELECT=y
    CONFIG_B43_PCICORE_AUTOSELECT=y
    CONFIG_B43_PCMCIA=y
    CONFIG_B43_SDIO=y
    CONFIG_B43_PIO=y
    CONFIG_B43_PHY_N=y
    CONFIG_B43_PHY_LP=y
    CONFIG_B43_LEDS=y
    CONFIG_B43_HWRNG=y
    # CONFIG_B43_DEBUG is not set
    CONFIG_B43LEGACY=m
    CONFIG_B43LEGACY_PCI_AUTOSELECT=y
    CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
    CONFIG_B43LEGACY_LEDS=y
    CONFIG_B43LEGACY_HWRNG=y
    # CONFIG_B43LEGACY_DEBUG is not set
    CONFIG_B43LEGACY_DMA=y
    CONFIG_B43LEGACY_PIO=y
    CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
    # CONFIG_B43LEGACY_DMA_MODE is not set
    # CONFIG_B43LEGACY_PIO_MODE is not set
    CONFIG_HOSTAP=m
    CONFIG_HOSTAP_FIRMWARE=y
    # CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
    CONFIG_HOSTAP_PLX=m
    CONFIG_HOSTAP_PCI=m
    CONFIG_HOSTAP_CS=m
    CONFIG_IPW2100=m
    CONFIG_IPW2100_MONITOR=y
    # CONFIG_IPW2100_DEBUG is not set
    CONFIG_IPW2200=m
    CONFIG_IPW2200_MONITOR=y
    CONFIG_IPW2200_RADIOTAP=y
    CONFIG_IPW2200_PROMISCUOUS=y
    CONFIG_IPW2200_QOS=y
    # CONFIG_IPW2200_DEBUG is not set
    CONFIG_LIBIPW=m
    # CONFIG_LIBIPW_DEBUG is not set
    CONFIG_IWLAGN=m
    # Debugging Options
    # CONFIG_IWLWIFI_DEBUG is not set
    CONFIG_IWLWIFI_DEVICE_TRACING=y
    CONFIG_IWLWIFI_DEVICE_SVTOOL=y
    CONFIG_IWL_P2P=y
    CONFIG_IWLWIFI_LEGACY=m
    # Debugging Options
    # CONFIG_IWLWIFI_LEGACY_DEBUG is not set
    # CONFIG_IWLWIFI_LEGACY_DEVICE_TRACING is not set
    CONFIG_IWL4965=m
    CONFIG_IWL3945=m
    CONFIG_IWM=m
    # CONFIG_IWM_DEBUG is not set
    CONFIG_IWM_TRACING=y
    CONFIG_LIBERTAS=m
    CONFIG_LIBERTAS_USB=m
    CONFIG_LIBERTAS_CS=m
    CONFIG_LIBERTAS_SDIO=m
    CONFIG_LIBERTAS_SPI=m
    # CONFIG_LIBERTAS_DEBUG is not set
    CONFIG_LIBERTAS_MESH=y
    CONFIG_HERMES=m
    CONFIG_HERMES_PRISM=y
    CONFIG_HERMES_CACHE_FW_ON_INIT=y
    CONFIG_PLX_HERMES=m
    CONFIG_TMD_HERMES=m
    CONFIG_NORTEL_HERMES=m
    CONFIG_PCI_HERMES=m
    CONFIG_PCMCIA_HERMES=m
    CONFIG_PCMCIA_SPECTRUM=m
    CONFIG_ORINOCO_USB=m
    CONFIG_P54_COMMON=m
    CONFIG_P54_USB=m
    CONFIG_P54_PCI=m
    CONFIG_P54_SPI=m
    CONFIG_P54_SPI_DEFAULT_EEPROM=y
    CONFIG_P54_LEDS=y
    CONFIG_RT2X00=m
    CONFIG_RT2400PCI=m
    CONFIG_RT2500PCI=m
    CONFIG_RT61PCI=m
    CONFIG_RT2800PCI=m
    CONFIG_RT2800PCI_RT33XX=y
    CONFIG_RT2800PCI_RT35XX=y
    CONFIG_RT2800PCI_RT53XX=y
    CONFIG_RT2500USB=m
    CONFIG_RT73USB=m
    CONFIG_RT2800USB=m
    CONFIG_RT2800USB_RT33XX=y
    CONFIG_RT2800USB_RT35XX=y
    CONFIG_RT2800USB_RT53XX=y
    CONFIG_RT2800USB_UNKNOWN=y
    CONFIG_RT2800_LIB=m
    CONFIG_RT2X00_LIB_PCI=m
    CONFIG_RT2X00_LIB_USB=m
    CONFIG_RT2X00_LIB=m
    CONFIG_RT2X00_LIB_FIRMWARE=y
    CONFIG_RT2X00_LIB_CRYPTO=y
    CONFIG_RT2X00_LIB_LEDS=y
    # CONFIG_RT2X00_DEBUG is not set
    CONFIG_RTL8192CE=m
    CONFIG_RTL8192SE=m
    CONFIG_RTL8192CU=m
    CONFIG_RTLWIFI=m
    CONFIG_RTL8192C_COMMON=m
    CONFIG_WL1251=m
    CONFIG_WL1251_SPI=m
    CONFIG_WL1251_SDIO=m
    CONFIG_WL12XX_MENU=m
    CONFIG_WL12XX=m
    CONFIG_WL12XX_HT=y
    CONFIG_WL12XX_SPI=m
    CONFIG_WL12XX_SDIO=m
    CONFIG_WL12XX_SDIO_TEST=m
    CONFIG_WL12XX_PLATFORM_DATA=y
    CONFIG_ZD1211RW=m
    # CONFIG_ZD1211RW_DEBUG is not set
    CONFIG_MWIFIEX=m
    CONFIG_MWIFIEX_SDIO=m
    # WiMAX Wireless Broadband devices
    CONFIG_WIMAX_I2400M=m
    CONFIG_WIMAX_I2400M_USB=m
    CONFIG_WIMAX_I2400M_SDIO=m
    # CONFIG_WIMAX_IWMC3200_SDIO is not set
    CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8
    # USB Network Adapters
    CONFIG_USB_CATC=m
    CONFIG_USB_KAWETH=m
    CONFIG_USB_PEGASUS=m
    CONFIG_USB_RTL8150=m
    CONFIG_USB_USBNET=m
    CONFIG_USB_NET_AX8817X=m
    CONFIG_USB_NET_CDCETHER=m
    CONFIG_USB_NET_CDC_EEM=m
    CONFIG_USB_NET_CDC_NCM=m
    CONFIG_USB_NET_DM9601=m
    CONFIG_USB_NET_SMSC75XX=m
    CONFIG_USB_NET_SMSC95XX=m
    CONFIG_USB_NET_GL620A=m
    CONFIG_USB_NET_NET1080=m
    CONFIG_USB_NET_PLUSB=m
    CONFIG_USB_NET_MCS7830=m
    CONFIG_USB_NET_RNDIS_HOST=m
    CONFIG_USB_NET_CDC_SUBSET=m
    CONFIG_USB_ALI_M5632=y
    CONFIG_USB_AN2720=y
    CONFIG_USB_BELKIN=y
    CONFIG_USB_ARMLINUX=y
    CONFIG_USB_EPSON2888=y
    CONFIG_USB_KC2190=y
    CONFIG_USB_NET_ZAURUS=m
    CONFIG_USB_NET_CX82310_ETH=m
    CONFIG_USB_NET_KALMIA=m
    CONFIG_USB_HSO=m
    CONFIG_USB_NET_INT51X1=m
    CONFIG_USB_CDC_PHONET=m
    CONFIG_USB_IPHETH=m
    CONFIG_USB_SIERRA_NET=m
    CONFIG_USB_VL600=m
    CONFIG_NET_PCMCIA=y
    CONFIG_PCMCIA_3C589=m
    CONFIG_PCMCIA_3C574=m
    CONFIG_PCMCIA_FMVJ18X=m
    CONFIG_PCMCIA_PCNET=m
    CONFIG_PCMCIA_NMCLAN=m
    CONFIG_PCMCIA_SMC91C92=m
    CONFIG_PCMCIA_XIRC2PS=m
    CONFIG_PCMCIA_AXNET=m
    # CONFIG_WAN is not set
    CONFIG_ATM_DRIVERS=y
    # CONFIG_ATM_DUMMY is not set
    CONFIG_ATM_TCP=m
    CONFIG_ATM_LANAI=m
    CONFIG_ATM_ENI=m
    # CONFIG_ATM_ENI_DEBUG is not set
    # CONFIG_ATM_ENI_TUNE_BURST is not set
    CONFIG_ATM_FIRESTREAM=m
    CONFIG_ATM_ZATM=m
    # CONFIG_ATM_ZATM_DEBUG is not set
    CONFIG_ATM_NICSTAR=m
    # CONFIG_ATM_NICSTAR_USE_SUNI is not set
    # CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
    CONFIG_ATM_IDT77252=m
    # CONFIG_ATM_IDT77252_DEBUG is not set
    # CONFIG_ATM_IDT77252_RCV_ALL is not set
    CONFIG_ATM_IDT77252_USE_SUNI=y
    CONFIG_ATM_AMBASSADOR=m
    # CONFIG_ATM_AMBASSADOR_DEBUG is not set
    CONFIG_ATM_HORIZON=m
    # CONFIG_ATM_HORIZON_DEBUG is not set
    CONFIG_ATM_IA=m
    # CONFIG_ATM_IA_DEBUG is not set
    CONFIG_ATM_FORE200E=m
    # CONFIG_ATM_FORE200E_USE_TASKLET is not set
    CONFIG_ATM_FORE200E_TX_RETRY=16
    CONFIG_ATM_FORE200E_DEBUG=0
    CONFIG_ATM_HE=m
    # CONFIG_ATM_HE_USE_SUNI is not set
    CONFIG_ATM_SOLOS=m
    CONFIG_IEEE802154_DRIVERS=m
    CONFIG_IEEE802154_FAKEHARD=m
    # CAIF transport drivers
    CONFIG_CAIF_TTY=m
    CONFIG_CAIF_SPI_SLAVE=m
    CONFIG_CAIF_SPI_SYNC=y
    CONFIG_XEN_NETDEV_FRONTEND=m
    CONFIG_XEN_NETDEV_BACKEND=m
    CONFIG_RIONET=m
    CONFIG_RIONET_TX_SIZE=128
    CONFIG_RIONET_RX_SIZE=128
    # CONFIG_FDDI is not set
    # CONFIG_HIPPI is not set
    CONFIG_PLIP=m
    CONFIG_PPP=m
    CONFIG_PPP_MULTILINK=y
    CONFIG_PPP_FILTER=y
    CONFIG_PPP_ASYNC=m
    CONFIG_PPP_SYNC_TTY=m
    CONFIG_PPP_DEFLATE=m
    CONFIG_PPP_BSDCOMP=m
    CONFIG_PPP_MPPE=m
    CONFIG_PPPOE=m
    CONFIG_PPTP=m
    CONFIG_PPPOATM=m
    CONFIG_PPPOL2TP=m
    CONFIG_SLIP=m
    # CONFIG_SLIP_COMPRESSED is not set
    CONFIG_SLHC=m
    # CONFIG_SLIP_SMART is not set
    # CONFIG_SLIP_MODE_SLIP6 is not set
    # CONFIG_NET_FC is not set
    CONFIG_NETCONSOLE=m
    CONFIG_NETCONSOLE_DYNAMIC=y
    CONFIG_NETPOLL=y
    # CONFIG_NETPOLL_TRAP is not set
    CONFIG_NET_POLL_CONTROLLER=y
    CONFIG_VIRTIO_NET=m
    CONFIG_VMXNET3=m
    CONFIG_ISDN=y
    CONFIG_ISDN_I4L=m
    CONFIG_ISDN_PPP=y
    CONFIG_ISDN_PPP_VJ=y
    CONFIG_ISDN_MPP=y
    CONFIG_IPPP_FILTER=y
    CONFIG_ISDN_PPP_BSDCOMP=m
    CONFIG_ISDN_AUDIO=y
    CONFIG_ISDN_TTY_FAX=y
    # ISDN feature submodules
    CONFIG_ISDN_DIVERSION=m
    # ISDN4Linux hardware drivers
    # Passive cards
    CONFIG_ISDN_DRV_HISAX=m
    # D-channel protocol features
    CONFIG_HISAX_EURO=y
    CONFIG_DE_AOC=y
    # CONFIG_HISAX_NO_SENDCOMPLETE is not set
    # CONFIG_HISAX_NO_LLC is not set
    # CONFIG_HISAX_NO_KEYPAD is not set
    CONFIG_HISAX_1TR6=y
    CONFIG_HISAX_NI1=y
    CONFIG_HISAX_MAX_CARDS=8
    # HiSax supported cards
    CONFIG_HISAX_16_3=y
    CONFIG_HISAX_TELESPCI=y
    CONFIG_HISAX_S0BOX=y
    CONFIG_HISAX_FRITZPCI=y
    CONFIG_HISAX_AVM_A1_PCMCIA=y
    CONFIG_HISAX_ELSA=y
    CONFIG_HISAX_DIEHLDIVA=y
    CONFIG_HISAX_SEDLBAUER=y
    CONFIG_HISAX_NETJET=y
    CONFIG_HISAX_NETJET_U=y
    CONFIG_HISAX_NICCY=y
    CONFIG_HISAX_BKM_A4T=y
    CONFIG_HISAX_SCT_QUADRO=y
    CONFIG_HISAX_GAZEL=y
    CONFIG_HISAX_HFC_PCI=y
    CONFIG_HISAX_W6692=y
    CONFIG_HISAX_HFC_SX=y
    CONFIG_HISAX_ENTERNOW_PCI=y
    # CONFIG_HISAX_DEBUG is not set
    # HiSax PCMCIA card service modules
    CONFIG_HISAX_SEDLBAUER_CS=m
    CONFIG_HISAX_ELSA_CS=m
    CONFIG_HISAX_AVM_A1_CS=m
    CONFIG_HISAX_TELES_CS=m
    # HiSax sub driver modules
    CONFIG_HISAX_ST5481=m
    CONFIG_HISAX_HFCUSB=m
    CONFIG_HISAX_HFC4S8S=m
    CONFIG_HISAX_FRITZ_PCIPNP=m
    # Active cards
    CONFIG_ISDN_CAPI=m
    CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
    CONFIG_CAPI_TRACE=y
    CONFIG_ISDN_CAPI_MIDDLEWARE=y
    CONFIG_ISDN_CAPI_CAPI20=m
    CONFIG_ISDN_CAPI_CAPIDRV=m
    # CAPI hardware drivers
    CONFIG_CAPI_AVM=y
    CONFIG_ISDN_DRV_AVMB1_B1PCI=m
    CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
    CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
    CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
    CONFIG_ISDN_DRV_AVMB1_T1PCI=m
    CONFIG_ISDN_DRV_AVMB1_C4=m
    CONFIG_CAPI_EICON=y
    CONFIG_ISDN_DIVAS=m
    CONFIG_ISDN_DIVAS_BRIPCI=y
    CONFIG_ISDN_DIVAS_PRIPCI=y
    CONFIG_ISDN_DIVAS_DIVACAPI=m
    CONFIG_ISDN_DIVAS_USERIDI=m
    CONFIG_ISDN_DIVAS_MAINT=m
    CONFIG_ISDN_DRV_GIGASET=m
    CONFIG_GIGASET_CAPI=y
    # CONFIG_GIGASET_I4L is not set
    # CONFIG_GIGASET_DUMMYLL is not set
    CONFIG_GIGASET_BASE=m
    CONFIG_GIGASET_M105=m
    CONFIG_GIGASET_M101=m
    # CONFIG_GIGASET_DEBUG is not set
    CONFIG_HYSDN=m
    CONFIG_HYSDN_CAPI=y
    CONFIG_MISDN=m
    CONFIG_MISDN_DSP=m
    CONFIG_MISDN_L1OIP=m
    # mISDN hardware drivers
    CONFIG_MISDN_HFCPCI=m
    CONFIG_MISDN_HFCMULTI=m
    CONFIG_MISDN_HFCUSB=m
    CONFIG_MISDN_AVMFRITZ=m
    CONFIG_MISDN_SPEEDFAX=m
    CONFIG_MISDN_INFINEON=m
    CONFIG_MISDN_W6692=m
    CONFIG_MISDN_NETJET=m
    CONFIG_MISDN_IPAC=m
    CONFIG_MISDN_ISAR=m
    CONFIG_ISDN_HDLC=m
    # CONFIG_PHONE is not set
    # Input device support
    CONFIG_INPUT=y
    CONFIG_INPUT_FF_MEMLESS=m
    CONFIG_INPUT_POLLDEV=m
    CONFIG_INPUT_SPARSEKMAP=m
    # Userland interfaces
    CONFIG_INPUT_MOUSEDEV=y
    CONFIG_INPUT_MOUSEDEV_PSAUX=y
    CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
    CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
    CONFIG_INPUT_JOYDEV=m
    CONFIG_INPUT_EVDEV=m
    # CONFIG_INPUT_EVBUG is not set
    # Input Device Drivers
    CONFIG_INPUT_KEYBOARD=y
    CONFIG_KEYBOARD_ADP5588=m
    CONFIG_KEYBOARD_ADP5589=m
    CONFIG_KEYBOARD_ATKBD=y
    CONFIG_KEYBOARD_QT1070=m
    CONFIG_KEYBOARD_QT2160=m
    # CONFIG_KEYBOARD_LKKBD is not set
    CONFIG_KEYBOARD_GPIO=m
    CONFIG_KEYBOARD_GPIO_POLLED=m
    CONFIG_KEYBOARD_TCA6416=m
    CONFIG_KEYBOARD_MATRIX=m
    # CONFIG_KEYBOARD_LM8323 is not set
    # CONFIG_KEYBOARD_MAX7359 is not set
    CONFIG_KEYBOARD_MCS=m
    CONFIG_KEYBOARD_MPR121=m
    # CONFIG_KEYBOARD_NEWTON is not set
    # CONFIG_KEYBOARD_OPENCORES is not set
    # CONFIG_KEYBOARD_STOWAWAY is not set
    # CONFIG_KEYBOARD_SUNKBD is not set
    # CONFIG_KEYBOARD_XTKBD is not set
    CONFIG_INPUT_MOUSE=y
    CONFIG_MOUSE_PS2=m
    CONFIG_MOUSE_PS2_ALPS=y
    CONFIG_MOUSE_PS2_LOGIPS2PP=y
    CONFIG_MOUSE_PS2_SYNAPTICS=y
    CONFIG_MOUSE_PS2_LIFEBOOK=y
    CONFIG_MOUSE_PS2_TRACKPOINT=y
    CONFIG_MOUSE_PS2_ELANTECH=y
    CONFIG_MOUSE_PS2_SENTELIC=y
    # CONFIG_MOUSE_PS2_TOUCHKIT is not set
    CONFIG_MOUSE_SERIAL=y
    CONFIG_MOUSE_APPLETOUCH=m
    CONFIG_MOUSE_BCM5974=m
    CONFIG_MOUSE_VSXXXAA=m
    CONFIG_MOUSE_GPIO=m
    CONFIG_MOUSE_SYNAPTICS_I2C=m
    CONFIG_INPUT_JOYSTICK=y
    CONFIG_JOYSTICK_ANALOG=m
    CONFIG_JOYSTICK_A3D=m
    CONFIG_JOYSTICK_ADI=m
    CONFIG_JOYSTICK_COBRA=m
    CONFIG_JOYSTICK_GF2K=m
    CONFIG_JOYSTICK_GRIP=m
    CONFIG_JOYSTICK_GRIP_MP=m
    CONFIG_JOYSTICK_GUILLEMOT=m
    CONFIG_JOYSTICK_INTERACT=m
    CONFIG_JOYSTICK_SIDEWINDER=m
    CONFIG_JOYSTICK_TMDC=m
    CONFIG_JOYSTICK_IFORCE=m
    CONFIG_JOYSTICK_IFORCE_USB=y
    CONFIG_JOYSTICK_IFORCE_232=y
    CONFIG_JOYSTICK_WARRIOR=m
    CONFIG_JOYSTICK_MAGELLAN=m
    CONFIG_JOYSTICK_SPACEORB=m
    CONFIG_JOYSTICK_SPACEBALL=m
    CONFIG_JOYSTICK_STINGER=m
    CONFIG_JOYSTICK_TWIDJOY=m
    CONFIG_JOYSTICK_ZHENHUA=m
    CONFIG_JOYSTICK_DB9=m
    CONFIG_JOYSTICK_GAMECON=m
    CONFIG_JOYSTICK_TURBOGRAFX=m
    CONFIG_JOYSTICK_AS5011=m
    CONFIG_JOYSTICK_JOYDUMP=m
    CONFIG_JOYSTICK_XPAD=m
    CONFIG_JOYSTICK_XPAD_FF=y
    CONFIG_JOYSTICK_XPAD_LEDS=y
    CONFIG_JOYSTICK_WALKERA0701=m
    CONFIG_INPUT_TABLET=y
    CONFIG_TABLET_USB_ACECAD=m
    CONFIG_TABLET_USB_AIPTEK=m
    CONFIG_TABLET_USB_GTCO=m
    CONFIG_TABLET_USB_HANWANG=m
    CONFIG_TABLET_USB_KBTAB=m
    CONFIG_TABLET_USB_WACOM=m
    CONFIG_INPUT_TOUCHSCREEN=y
    CONFIG_TOUCHSCREEN_ADS7846=m
    CONFIG_TOUCHSCREEN_AD7877=m
    CONFIG_TOUCHSCREEN_AD7879=m
    CONFIG_TOUCHSCREEN_AD7879_I2C=m
    CONFIG_TOUCHSCREEN_AD7879_SPI=m
    CONFIG_TOUCHSCREEN_ATMEL_MXT=m
    CONFIG_TOUCHSCREEN_BU21013=m
    CONFIG_TOUCHSCREEN_CY8CTMG110=m
    CONFIG_TOUCHSCREEN_DYNAPRO=m
    CONFIG_TOUCHSCREEN_HAMPSHIRE=m
    CONFIG_TOUCHSCREEN_EETI=m
    CONFIG_TOUCHSCREEN_FUJITSU=m
    CONFIG_TOUCHSCREEN_GUNZE=m
    CONFIG_TOUCHSCREEN_ELO=m
    CONFIG_TOUCHSCREEN_WACOM_W8001=m
    CONFIG_TOUCHSCREEN_MAX11801=m
    CONFIG_TOUCHSCREEN_MCS5000=m
    CONFIG_TOUCHSCREEN_MTOUCH=m
    CONFIG_TOUCHSCREEN_INEXIO=m
    CONFIG_TOUCHSCREEN_MK712=m
    CONFIG_TOUCHSCREEN_PENMOUNT=m
    CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
    CONFIG_TOUCHSCREEN_TOUCHWIN=m
    CONFIG_TOUCHSCREEN_UCB1400=m
    CONFIG_TOUCHSCREEN_WM831X=m
    CONFIG_TOUCHSCREEN_WM97XX=m
    CONFIG_TOUCHSCREEN_WM9705=y
    CONFIG_TOUCHSCREEN_WM9712=y
    CONFIG_TOUCHSCREEN_WM9713=y
    CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
    CONFIG_TOUCHSCREEN_MC13783=m
    CONFIG_TOUCHSCREEN_USB_EGALAX=y
    CONFIG_TOUCHSCREEN_USB_PANJIT=y
    CONFIG_TOUCHSCREEN_USB_3M=y
    CONFIG_TOUCHSCREEN_USB_ITM=y
    CONFIG_TOUCHSCREEN_USB_ETURBO=y
    CONFIG_TOUCHSCREEN_USB_GUNZE=y
    CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
    CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
    CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
    CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
    CONFIG_TOUCHSCREEN_USB_GOTOP=y
    CONFIG_TOUCHSCREEN_USB_JASTEC=y
    CONFIG_TOUCHSCREEN_USB_E2I=y
    CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y
    CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y
    CONFIG_TOUCHSCREEN_USB_NEXIO=y
    CONFIG_TOUCHSCREEN_TOUCHIT213=m
    CONFIG_TOUCHSCREEN_TSC2005=m
    CONFIG_TOUCHSCREEN_TSC2007=m
    CONFIG_TOUCHSCREEN_PCAP=m
    CONFIG_TOUCHSCREEN_ST1232=m
    CONFIG_TOUCHSCREEN_TPS6507X=m
    CONFIG_INPUT_MISC=y
    CONFIG_INPUT_AB8500_PONKEY=m
    CONFIG_INPUT_AD714X=m
    CONFIG_INPUT_AD714X_I2C=m
    CONFIG_INPUT_AD714X_SPI=m
    CONFIG_INPUT_PCSPKR=m
    CONFIG_INPUT_APANEL=m
    CONFIG_INPUT_ATLAS_BTNS=m
    CONFIG_INPUT_ATI_REMOTE=m
    CONFIG_INPUT_ATI_REMOTE2=m
    CONFIG_INPUT_KEYSPAN_REMOTE=m
    CONFIG_INPUT_POWERMATE=m
    CONFIG_INPUT_YEALINK=m
    CONFIG_INPUT_CM109=m
    CONFIG_INPUT_UINPUT=m
    CONFIG_INPUT_PCF50633_PMU=m
    CONFIG_INPUT_PCF8574=m
    CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
    CONFIG_INPUT_WM831X_ON=m
    # CONFIG_INPUT_PCAP is not set
    CONFIG_INPUT_ADXL34X=m
    CONFIG_INPUT_ADXL34X_I2C=m
    CONFIG_INPUT_ADXL34X_SPI=m
    CONFIG_INPUT_CMA3000=m
    CONFIG_INPUT_CMA3000_I2C=m
    CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
    # Hardware I/O ports
    CONFIG_SERIO=y
    CONFIG_SERIO_I8042=y
    CONFIG_SERIO_SERPORT=m
    CONFIG_SERIO_CT82C710=m
    CONFIG_SERIO_PARKBD=m
    CONFIG_SERIO_PCIPS2=m
    CONFIG_SERIO_LIBPS2=y
    CONFIG_SERIO_RAW=m
    CONFIG_SERIO_ALTERA_PS2=m
    CONFIG_SERIO_PS2MULT=m
    CONFIG_GAMEPORT=m
    CONFIG_GAMEPORT_NS558=m
    CONFIG_GAMEPORT_L4=m
    CONFIG_GAMEPORT_EMU10K1=m
    CONFIG_GAMEPORT_FM801=m
    # Character devices
    CONFIG_VT=y
    CONFIG_CONSOLE_TRANSLATIONS=y
    CONFIG_VT_CONSOLE=y
    CONFIG_HW_CONSOLE=y
    CONFIG_VT_HW_CONSOLE_BINDING=y
    CONFIG_UNIX98_PTYS=y
    CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
    # CONFIG_LEGACY_PTYS is not set
    CONFIG_SERIAL_NONSTANDARD=y
    CONFIG_ROCKETPORT=m
    CONFIG_CYCLADES=m
    # CONFIG_CYZ_INTR is not set
    # CONFIG_MOXA_INTELLIO is not set
    # CONFIG_MOXA_SMARTIO is not set
    CONFIG_SYNCLINK=m
    CONFIG_SYNCLINKMP=m
    # CONFIG_SYNCLINK_GT is not set
    CONFIG_NOZOMI=m
    # CONFIG_ISI is not set
    CONFIG_N_HDLC=m
    CONFIG_N_GSM=m
    CONFIG_TRACE_ROUTER=m
    CONFIG_TRACE_SINK=m
    # CONFIG_DEVKMEM is not set
    # CONFIG_STALDRV is not set
    # Serial drivers
    CONFIG_SERIAL_8250=y
    CONFIG_SERIAL_8250_CONSOLE=y
    CONFIG_FIX_EARLYCON_MEM=y
    CONFIG_SERIAL_8250_PCI=y
    CONFIG_SERIAL_8250_PNP=y
    CONFIG_SERIAL_8250_CS=m
    CONFIG_SERIAL_8250_NR_UARTS=32
    CONFIG_SERIAL_8250_RUNTIME_UARTS=4
    # CONFIG_SERIAL_8250_EXTENDED is not set
    # Non-8250 serial port support
    CONFIG_SERIAL_MAX3100=m
    CONFIG_SERIAL_MAX3107=m
    CONFIG_SERIAL_MFD_HSU=m
    CONFIG_SERIAL_UARTLITE=m
    CONFIG_SERIAL_CORE=y
    CONFIG_SERIAL_CORE_CONSOLE=y
    CONFIG_SERIAL_JSM=m
    CONFIG_SERIAL_TIMBERDALE=m
    CONFIG_SERIAL_ALTERA_JTAGUART=m
    CONFIG_SERIAL_ALTERA_UART=m
    CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
    CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
    CONFIG_SERIAL_IFX6X60=m
    CONFIG_SERIAL_PCH_UART=m
    CONFIG_SERIAL_XILINX_PS_UART=m
    CONFIG_PRINTER=m
    # CONFIG_LP_CONSOLE is not set
    CONFIG_PPDEV=m
    CONFIG_HVC_DRIVER=y
    CONFIG_HVC_IRQ=y
    CONFIG_HVC_XEN=y
    CONFIG_VIRTIO_CONSOLE=m
    CONFIG_IPMI_HANDLER=m
    # CONFIG_IPMI_PANIC_EVENT is not set
    CONFIG_IPMI_DEVICE_INTERFACE=m
    CONFIG_IPMI_SI=m
    CONFIG_IPMI_WATCHDOG=m
    CONFIG_IPMI_POWEROFF=m
    CONFIG_HW_RANDOM=y
    CONFIG_HW_RANDOM_TIMERIOMEM=m
    CONFIG_HW_RANDOM_INTEL=m
    CONFIG_HW_RANDOM_AMD=m
    CONFIG_HW_RANDOM_VIA=m
    CONFIG_HW_RANDOM_VIRTIO=m
    CONFIG_NVRAM=m
    CONFIG_R3964=m
    CONFIG_APPLICOM=m
    # PCMCIA character devices
    CONFIG_SYNCLINK_CS=m
    CONFIG_CARDMAN_4000=m
    CONFIG_CARDMAN_4040=m
    CONFIG_IPWIRELESS=m
    CONFIG_MWAVE=m
    # CONFIG_RAW_DRIVER is not set
    CONFIG_HPET=y
    CONFIG_HPET_MMAP=y
    CONFIG_HANGCHECK_TIMER=m
    CONFIG_TCG_TPM=m
    CONFIG_TCG_TIS=m
    CONFIG_TCG_NSC=m
    CONFIG_TCG_ATMEL=m
    CONFIG_TCG_INFINEON=m
    CONFIG_TELCLOCK=m
    CONFIG_DEVPORT=y
    CONFIG_RAMOOPS=m
    CONFIG_I2C=m
    CONFIG_I2C_BOARDINFO=y
    CONFIG_I2C_COMPAT=y
    CONFIG_I2C_CHARDEV=m
    CONFIG_I2C_MUX=m
    # Multiplexer I2C Chip support
    CONFIG_I2C_MUX_GPIO=m
    CONFIG_I2C_MUX_PCA9541=m
    CONFIG_I2C_MUX_PCA954x=m
    CONFIG_I2C_HELPER_AUTO=y
    CONFIG_I2C_SMBUS=m
    CONFIG_I2C_ALGOBIT=m
    CONFIG_I2C_ALGOPCA=m
    # I2C Hardware Bus support
    # PC SMBus host controller drivers
    CONFIG_I2C_ALI1535=m
    CONFIG_I2C_ALI1563=m
    CONFIG_I2C_ALI15X3=m
    CONFIG_I2C_AMD756=m
    CONFIG_I2C_AMD756_S4882=m
    CONFIG_I2C_AMD8111=m
    CONFIG_I2C_I801=m
    CONFIG_I2C_ISCH=m
    CONFIG_I2C_PIIX4=m
    CONFIG_I2C_NFORCE2=m
    CONFIG_I2C_NFORCE2_S4985=m
    CONFIG_I2C_SIS5595=m
    CONFIG_I2C_SIS630=m
    CONFIG_I2C_SIS96X=m
    CONFIG_I2C_VIA=m
    CONFIG_I2C_VIAPRO=m
    # ACPI drivers
    CONFIG_I2C_SCMI=m
    # I2C system bus drivers (mostly embedded / system-on-chip)
    CONFIG_I2C_GPIO=m
    CONFIG_I2C_INTEL_MID=m
    CONFIG_I2C_OCORES=m
    CONFIG_I2C_PCA_PLATFORM=m
    # CONFIG_I2C_PXA_PCI is not set
    CONFIG_I2C_SIMTEC=m
    CONFIG_I2C_XILINX=m
    CONFIG_I2C_EG20T=m
    # External I2C/SMBus adapter drivers
    CONFIG_I2C_DIOLAN_U2C=m
    CONFIG_I2C_PARPORT=m
    CONFIG_I2C_PARPORT_LIGHT=m
    CONFIG_I2C_TAOS_EVM=m
    CONFIG_I2C_

    Thanks for the replies on helping me out.
    With the OC I actually have a Corsair A70 installed doing push pull fan configuration. I was actually talking about the stock speed of the chip when I was doing temperature runs.
    For Real Temp I just ran prime95 for about an 20mins and this was the results:
    Then in control center the cpu temp was crazy high:
    Real Temp shows everything to be fine temp wise I think. Should I just ignore the cpu temp in control center or be cautious and figure out what exactly is going on?

  • Macbook pro 13' 2012 fan problem? (high cpu temp)

    my macbook gets cpu temp at 98C and then the fan starts raising speed from the default rpm(2000rpm).
    with heavy cpu usage and cpu temp at 93-100C, tha fan waits about  2-5 minutes and then kicks in and increase the rpm( the higher rpm i saw was 4000rpm at 101C cpu temp). all the other time the fan speed is between 1995-2004rpm.
    Is this normal?
    I've already tried SMC and PRAM reset and clean OSX installation.

    thank you for your answer.
    But is it normal for the fan to wait so long 2-5 minutes and then start raising the rpm?
    I expected that the rpm will go up simultaneously with the Cpu temp. Like if the Cpu starts increasing temp (about 70-80C) the fan will kick in...
    I know from a friend with a Macbook retina that his fans keep spinning at 3000-4000rpm and always keep the Cpu temp close to 60C. I know that the architecture is diferent but the cooling logic should remain the same. right?

  • Mid-2009 macbook pro high cpu temp ( 100C) after every cold boot

    Hi everyone,
    Every time I cold-boot my MBP, the CPU temperature sky rockets to 100C within 3 minutes at idle with the fans barely kicking in until that point. The activity monitor shows 97% idle with no major processes running and this issue is reproducible every time I turn on the computer. However, if I immediately reboot the computer (warm boot), the computer runs normally (~70C CPU temp, fans @ 2000 rpm). If I do a SMC reset, the computer boots normally for the next immediate single cold boot but symptoms return thereafter. The only way to prevent the high CPU temperatures is to do a SMC reset before ever cold boot.
    I'm wondering if someone else has had these symptoms with their laptop and how they fixed it. The system is still under apple care and the symptoms are reproducible but I'd rather not bring it in as this is my daily-use machine.
    mid-2009 MBP (3.06 ghz)

    PRAM/NVRAM
    http://support.apple.com/kb/HT1379
    Hardware Test
    http://support.apple.com/kb/HT1509
    Check your Acitivity monitor for runaway processes
    Backup files to external drive and disconnect
    Lion
    Reboot holding command + r and use the Recovery Partition if on Lion, over-install/re-install
    Snow Leopard
    or hold c and boot off 10.6 disk and over-install OS X, then use the 10.6.8 Combo Update
    http://support.apple.com/kb/DL1399

  • High CPU temp on new SR MBPs

    I have posted this on other (not apple.com) forums, without many replies. I am hoping that posting it here will reach more SR MBP users.
    I load tested a Santa Rosa MBP (stock 2.4 GHz model) at a local Apple store, running 3 quicktime videos and one Final Cut Pro demo video to fully load the CPU (and GPU). Monitored the temp and CPU load with istat. The MBP was on a flat display table and the store was your usual mall room temp.
    The CPU ran between 82-91C, averaging about 84C. Really high. The fans stayed at a constant 2000 rpm, if I remember correctly -- I only looked at the fan rpm a couple times.
    (1) Has anyone else seen this high a CPU temp on a SR MBP?
    (2) Has anyone opened a new MBP up to inspect the thermal paste application?
    (3) Would the Apple Store exchange a brand-new MBP for another one, if running at 85C or higher was its only problem?
    I am worried about buying a new MBP now, because of heat. Thank you for any replies.
    SR MBP 2.4 GHz stock model Mac OS X (10.4.9) in-store

    I have an own the latest MBP to hit the market, for a
    couple of days I've notice the CPU temp floating
    around 59-61°C and this is just idling, doing nothing
    other then playing itunes. After spending sometime
    working in Photoshop the temp sores to 71-75°C, the
    system feels like it's slowing down ><</div>
    Using Photoshop with (presumably) one core loaded or sporadic load on both cores, and getting a CPU temp of 71-75C would seem to correspond well to my report of ~84C under full dual core load. Did your fans not go up in rpm as the CPU temp got higher, or the CPU load increased?
    It seems that the default fan configuration in SR MBPs, or perhaps the actual application of thermal paste inside (remember that old problem?), leads to systems that run extremely hot. This will shorten the life of the MBP, and it's just plain less comfortable to use!
    Not good. Thank you for the reply; hopefully more first-hand reports are coming.

  • New Install..Higher CPU temps??

    Just installed a new 80g Hard Drive.. Had to do a fresh install :-).. as it was mentioned here.. gohsting was "iffy"
    You guys were absolutely Right.
    So: New Drive Fresh XP pro install (Kt3 U2 Board, XP tbrd Cpu.. no overclock anything))
    Previous harddrive setup read 35 to 37 C onna PC alert pop up.. New install reads 43 to 46 onna Cpu...Case readout has only gone up maybe 1c.. WHY??
    there have been NO other changes except the new WD80JBand a fresh XP install drive. Case was and is Wide open, as in NO sides.
    Should I be concerned about this
    Help?

    I have the current setup to get good cooling;
    2 x IBM drives with adapters in 5.25" bays, with a "nose fan" taking in air blowing it over the harddrives to keep them cool and take in air into the case.
    1 x rear case fan that blows out of the case.
    1 x Thermal Take Silent Viking II too cool the CPU, and modded case with holes so that the rather high ducting mod and fan (which makes contact with case side) can take in air from outside the case.
    1 Topower 430W PSU with dual fans that exhaust from the case.
    This gives me the following temps;
    CPU: Idle 43C Load 49C
    Chipset: 34
    Harddrives: 29 and 28C
    Ambient temperature: 26C

  • High CPU temps with HT turned off?!

    There is a piece of hardware in my system that does not like hyperthreading, so I recently turned it off.  To my surprise, the CPU temperature went up by 8-10 C!!  Shows up in powerfan, and in the system temp readings in the setup screen, so I think the temps are real.  Any idea why such a dramatic temp increase??

    My hardware live in a harmony.... . I read somewhere, I'd be able to increase FSB, if "HT" is disable.... . I did it, but I achieved nothing, but high temps (idle 47"C very stable )? Then, I was shocked and turned on "HT"?
    I guess it is because when HT is off, the CPU is more loaded..... , but I am not sure ?

  • Very high kernel_task.. high cpu temp

    i dont know what happen to my macbook recently.. every time boot seems to be very slow.. and when reach to log in..i have to wait a few minutes before i can type my password. each time i try to view video from youtube system will freeze. i check cpu temperature im surprise it went up to almost 80 degrees. i look at activity monitor my kernel_task usage maintain 100-160% .. i remove all recent applications and even start in safe mode but nothing good.
    i need help guys.. my last resort is to reinstall everything but i have lotsa documents and files. takes time to backup everything. i know no hardware problems cos i bootcamp in windows everything is fine.

    thanks lyssa .. ok i just reinstall everything. reinstall all applications one by one to see if the apps that cause my macbook slow down..
    everything seem fine..but still i have to wait few minutes before i can type or click during login. i can move around the cursor but cant click anything.

  • B3 bios reports cpu temp 10c higher than b5 bios on k7n2 plat

    Dear list,
    b3 bios reports cpu temp 10c higher than b5 bios on k7n2 plat after reading posts that b3 is more stable changed back to that so far so good, seems more stable its just that cpu temp was 45-50 c on b5 bios but on b3 in the bios is says 60 c and in core center it now says 40c but was 70c before I re booted very odd indeed, its stable but soemtimes doesn't shutdown have to turn off but thats probely a widnows probelm somewhere.
    cheers
    brummie
    ps do I need to clear cmos when I have put new bios in or will it doit as part of the process ??

    dear os navi,
    yep
    http://www.thermaltake.com/coolers/volcano/rs/a1889.htm
    I got this one with a heat duct on it. yes its all seated well and clean, just downloaded a corecenter update, cleared the cmos and started again. I am now getting 44 c for the temp now. What the bios says I dont know, could be that I hadnt cleared the bios that the temp was reading wrong.
    cheers
    brummie

  • Kernel task over 100%. High CPU Load. High Temp. Problem Solved.

    Hi,
         I thought i would make a post as i had been having trouble with my 13 inch mid 2009 MBP for sometime (6 months), with runaway kernel tasks causing high CPU loads. I had searched through forums and discussions for a long time trying to find the problem and isolate it. Initially i discovered some problems with finder preferances that were chewing up CPU which i solved by deleting the prefereance file, allowing the system to recreate a non corrupted version. This helped but still i had problems. I tried maintainance suites like onyx, reseting PRAM, booting into safe mode, hardware checks and diagnostics, and more little tricks than i can remember. Nothing i tried really seemed to make a differance. Through reading on this forum and others i found out the kernel tasks can be a direct result of hi CPU core temps as the system runs a lot of small kernel tasks to try and take some of the CPU load away from processor intensive processes that may be contributing to hi CPU load. The thing which solved my problem in the end was opening up my MBP, being careful not to touch the logic board and literally puting my vacuum cleaner over the fan, sucking dust and dirt and dust out of my latop. This computer has been through the dirt with me, literally its been dragged through rural south east asia for a year and accompianied me to warhouse parties to perform and run lighting and visuals. Its little wonder the fan was obviously clogged. I know people tend to be holier than though with their mac products and treat them with the upmost respect, but my love for the MBP has come from how sturdy and reliable it has been under less than desirable conditions.
    Now im not telling people this is what they should do, i had just noticed alot of people with this problem in my attempts to solve mine, and in the end this is what helped. My MBP now runs at a temperature where i can touch the metal near the CPU without being worried about a 3rd degree burn and the CPU load is acceptable with no run away kernel tasks. Like i saw this might not be the cause of your porblem, as my laptop has lived a rough and fun life so far, but i thought i would share this with you all as i have had contstant help from this forum and others searches for solutions to problems with my apple products.

    Already tried SMC and PRAM-reset with no luck.
    On my MacBook late 2008 it's the same effect.

  • MBP 2.33GHz Core 2 Duo, CPU temp constant 90 degrees C at high load

    I have a 2.33GHz Core 2 Duo MBP. Not sure which chipset, but not Santa Rosa. I'm still running 10.5.2 because I don't want to stop the process I'm running at the moment.
    Anyhow, I'm running both CPUs at full load, and the program I'm running is very SSE-heavy. iStatPro reads the CPU as running at 90 degrees C with the fans running at about 3800RPM. It's been running like this for several days straight because this is the fastest compute hardware I own. I have three PC case fans pointing at the notebook, so the exterior is relatively cool, as are the other temp readings, but the CPU temp makes me nervous. Various things I've read suggest that about 85C isn't so healthy for the processor. Is that true?
    I did try calling Apple Care, but they basically blew me off, suggesting I use external cooling. I could take it to the Genius bar, but that'll be a good 3 hours of my time, so I need to make sure it's worth it.
    Comments?
    Thanks.

    See this article regarding runaway applications:
    http://docs.info.apple.com/article.html?artnum=304882
    and use that technique to make sure that no other heavy applications are crashing the party. There will be a number of smaller system apps and processes running; you're looking for a big hitter that you did not want.
    I hear that the MBP is good for 100°C/ 212°F. I'm a little surprised that you're getting only 3800 rpm at 90°. Fans should be able to turn up to 6000 rpm. You may wish to download smcFanControl.
    I use that program to increase the resting rpm from 2000 to about 2500 to give a head-start on any heat issues. At 2500, the fans are not noticeable unless I put my ear an inch from the the computer. The program also has a quick-change setting that lets you quickly bump the fan speed to the max of 6000 if things get too hot too fast.

  • 2.7 GHz Intel Core i7 CPU TEMP 90c Too high?

    Hi I have a mac mini (mid 2011)  spec:
    Processor  2.7 GHz Intel Core i7
    Memory  8 GB 1333 MHz DDR3
    Graphics  AMD Radeon HD 6630M 256 MB
    Software  Mac OS X Lion 10.7.2 (11C74)
    22" + 17" monitors
    and my CPU temp is around the 85c to 90c degree. Is this normal? Currently just surfing the net, and i think its making my mouse loss connections sometimes.
    thanks for your help guys,

    If you are in fact only surfing web and don't have a myriad
    of background apps running, then 85 to 90C is in fact to
    hot.
    I have a new Mac Mini Server connected to a Thunderbolt
    Display and have been surfing for a couple of hours and
    have a CPU temp of 47C and fan at ~2300 RPM. 
    (Note: room temp is 21C)
    If your Mini is running that hot, the fans should be roaring!
    What is your fan speed?
    BTW, the only time I hit temps like that is when I am using
    Handbrake to do video conversions, which will max out all
    cores available.  The fan gets up to ~4500-4800 RPM.
    The only time the Mini should get that hot is if you have
    something running that will max out CPU usage.  Check
    activity monitor to see if there is some process that is
    "running away" and forcing CPU to max out.
    If the fan is not working properly, you may need to do
    an SMC reset.  If it is not working at all, get it fixed.
    So, in conclusion, light CPU usage should not make the
    Mini that hot!

  • Attn: ALL APPLE PORTABLE OWNERS -Macbook Pro, MacBook Air Apple portable slowdown / kernel high CPU solution

    Attn: ALL APPLE PORTABLE OWNERS -MacBook Pro, MacBook Air, Mac mini slowdown kernel / high CPU use problem and solution.
    YOU COULD FRY YOUR COMPUTER IF YOU DO NOT FIX THIS PROBLEM SO PLEASE READ THIS ENTIRE MESSAGE!
    YOUR MAC WILL THANK YOU  
    Hey all.
    Like many of you I've got a newer Apple portable which slows down to an unusable level for an unknown reason. In my case a 13" mid 2009 Intel MacBook Pro Core 2 duo laptop. After many failed attempts to figure out what this nutty problem is I have discovered the problem, the solution and I have solved this for my own MacBook Pro. Since this fix it has been working immediately and consistently -without issue 
    I am sharing this with you in hopes that you to can fix your Apple portable yourself or so you know what to tell the Apple techs so they can quickly fix your Mac from this wacky and unfortunate kernel CPU hogging problem.
    User Software Symptoms :
    Your Apple portable computer periodically for an unknown reason slows down making everything frustratingly slow. This happens even when running previous apps that were never a problem; things that your Mac should be able to handle easily but for some reason now it can't.
    Slowdown most often happens during high CPU use such as gaming, video playback/editing, etc. or when running multiple apps (even non CPU intensive apps) at the same time.
    Possible Hardware Symptoms:
    Your computer is making more noise than it did previously.
    Your computer occasionally makes more noise but then gets quieter.
    Your computer is always extremely quiet (too quiet) even during high CPU apps -worst case scenario.
    It feels hotter than it normally does. Test: After several minutes of the slowness/high kernel CPU touch the computer to feel if it's hotter than normal.
    Looking at Activity Monitor (in the Utilities folder) shows the kernel_task is going bonkers eating up CPU but you have no idea why.
    After trying many different things to solve this problem such as :
    PR ram reset, SMC reset, fresh OS install of 10.5 and 10.6 on external hard-drives, calling and speaking to various Apple tech people who had no ideas/solutions, etc. I had no luck.
    Btw, if you're having the symptoms I've decscribed above I would not run the Apple Hardware check (read below as to why). You could fry your Mac!
    After much testing I found the problem :
    It is my belief that "recent" Apple portable computers are using low quality internal fans which soon stop working!
    Fail time period seems to be about 1.0 years to 2.5 years of use but this fail rate could vary depending on use.
    First noticeable symptoms (depending on what you notice) could be computer slowdown or your fan is making more noise than it normally does. This is your fan's lubrication slowly eroding making your fan spin slower and less smooth resulting in the louder noise and slower rpm spin speed. The slower fan spin speed means less cooling is happening for your computer. The effect on your computer is that the CPU and other chips are heating up! Overheating to be more specific. When your computer's chips overheat they get wonky and screw things up. Most often this seems to have the effect of making the kernel hog CPU resulting in a frustratingly slow user experience! Heat kills computer chips and it is extremely bad for them. Extreme overheat or repeated overheating has been said to shorten the life of computer chips or in extreme cases even fry them completely!
    The longer this goes on without being fixed your fan loses more lubrication and spins slower and slower cooling lesser and lesser resulting in your CPU heating up more and more possibly shortening the life of your Mac! Eventually your fan will stop completely and you could fry your chips! My fan stopped completely and my MBP was running very quietly, too quietly. Luckily I did not fry my chips because I was avoiding using high CPU apps because I knew something was wrong due to the massive slow down and wonkiness when I'd run them.
    Side Note:I'm a bit concerned about all those Mac mini servers which may be using the same defective low quality fans which cannot be easily serviced by their owners as they are co-located in some server facility. One positive thing is those facilities are usually well airconditioned keeping temps low.
    I suggest you do not run the Apple hardware test if you suspect your computer is overheating because the hardware test can seriously heat up your Mac! I tried running this test and my Mac got so hot I had to shut it down forcefully and I was concerned I damaged the chips. If you want to run the Apple hardware check make sure your CPU temperature is ok and that your fan works well before you run the test.
    IF YOU DON'T FIX THIS PROBLEM YOU COULD FRY YOUR COMPUTER DUE TO HEAT DAMAGE!
    DO NOT IGNORE THIS PROBLEM YOUR MACS LIFE MAY DEPEND ON IT!
    First you need to properly diagnose this problem and see if your CPU is getting to hot and you need to see if your fans are spinning at high rpms giving proper cooling, or if they are spinning at low rpms when running high intensive apps as your CPU temp increases.
    TEST IF YOUR FAN(s) IS WORKING CORRECTLY :
    Unfortunately Apple does not include CPU temperature reading software nor fan rpm speed software that I am aware of.
    However, There are two free ways that I know of to check your CPU tempurature and your fan speed :
    One app shows fan speed, and CPU heat, etc.
    One app shows fan speed, CPU heat and allows you to adjust your fan speed settings.
    One app is a dashboard widget, the other is a system preference.
    I suggest you download both of these to check your computer statistics.
    http://www.eidac.de/?p=134
    http://www.islayer.com/apps/istatpro/
    http://fan-control.en.softonic.com/mac
    I am not exactly sure what proper CPU temperatures are for the different Apple computers and this will change given different CPU loads.
    My MBP doesn't seem to function properly with anything around 90 degrees or higher (celcius).
    It seems when the fan is operating normally the CPU temp should not stay above 78 degrees even under heavy load, at least with the apps I'm running in the room temperature I'm in.
    I can post back later with more specific temps under longer load, etc. but I wanted to get this post up for people to read as soon as possible so they don't fry their Macs.
    If a bad fan is your problem :
    THERE ARE ONLY TWO SOLUTIONS FOR THIS PROBLEM :
    Fix or replace your fan so it cools the CPU and other chips properly.
    I fixed my fan myself and I didn't need to buy a new one. Total cost was about $8.00 because I had to buy a #00 sized screwdriver and had it shipped to me. Price includes shipping.
    On my mid 2009 model MacBook Pro fixing the fan was incredibly easy :
    Before I started doing this I wasn't 100% this was the problem so I decided to try to fix my fan instead of ordering a new one and replacing it. As it turns out I didn't need a new fan, I only needed to clean the existing fan and relube it's axl so it could spin easier like when it was new.  It also didn't make sense to buy a brand new fan from an Apple authorized parts reseller selling me the same low quality fan for $49.00 which would probably fail in 2 years again. Prices for new comparable fans from different manufactures range from about $15.00 USD + shipping to around $49.00 USD + shipping depending on where you order them from and what brand you get.
    How to fix / replace your internal fan on a mid 2009 MacBook Pro :
    Please note : I am not a hardware technician, nor expert. If you decide to fix your Mac yourself you do so at your own risk through no fault of my own. Prior to opening up your Mac you should google around and learn how to do it correctly and safely so you won't damage your Mac. For example, it is possible for you to damage your Mac by static electricity from your body. To avoid this I believe proper procedure is that you wear a 'ground strap' (around your wrist) which  you clip to your Mac's metal body so your body will not excude a charge into your Mac. I believe the idea here is to keep your body's charge level and your Mac's similar. Since I do not have a ground strap and fixing/replacing the fan doesn't require touching any chips I did not wear a ground strap during my fan fix. What I did was periodically repeatedly touch the metal case of my MBP hoping that would be enough and it was. Avoid unecessary actions that can build up a static charge in you. Once I started the repair I did not walk around the room building up an electrical charge in my body. Walking on carpet can often build up a large charge in us so it is better to be avoided while working on your Mac. Certain clothing can build up static charges. Combing hair, etc. If you need to get up from your repair when you come back make sure you first touch the Mac's metal case and not anything inside.
    Now that we're done with the scary paranoia, below you will find some instructions on how I fixed my MBP's internal fan
    Before you begin:
    Check out someone's video (not mine) on how to remove / replace the fan (but not take it apart and repair it):
    http://www.youtube.com/watch?v=AghE9newvbs
    Check out someone's web page (not mine) on how to replace the fan in a mid 2009 MacBook Pro:
    http://www.ifixit.com/Guide/Installing-MacBook-Pro-13-Inch-Unibody-Mid-2009-Fan/ 1338/1
    How to repair your mid 2009 MacBook Pro fan:
    Make sure you are in a 'secure' environment. No pets, no kids running around, no drinks near the Mac, etc. 
    Make sure your computer is unplugged from it's power supply and turned off. NOT slept. Totally off / powered down.
    1. Get a size #00 phillips screwdriver (Hobby store, Radioshack, Amazon).
    2. Open up your MBP by unscrewing the bottom (yes flip it over so it's resting upsidedown). Note where each screw goes because some are different lengths. I placed each one around my MBP where they go, insuring I know their order (don't jumble them up). Note which direction your MBP is facing when it's upside down so if you spin it around while working on it you still know where the screws go.
    2b. Some recommend removing the MBP's battery but I didn't do this step. You probably should, just to be safe. Follow the online instructions from the web page I listed about disconnecting the battery.
    3. Unscrew the fan's 3 holding screws.
    4. Unplug the fan's electrical connection (lift it straight up off the board). If you need to you can try to pry it up while you lift with a non metal/non electrical conductive object like a spudger if you have one or -perhaps a pen cap. Before you remove it, look closely at how it's attached so when you put it back on you won't wonder if you're doing it correctly. There's only one way it can go because it cannot fit 'the wrong way' but looking at it closely will make you feel more confident popping it back on when the time comes.
    5. Remove the fan - it easily lifts out.
    6. Take the fan apart by unscrewing it's one screw then unlatching the  plastic clips which hold it together.
    7. Seperate the fan blades from the housing. Lift the fan blades off of the fan housing by pulling it straight out away from the housing.
    8. Clean off the dust that's gathered. A can of compressed air helps here (I didn't have one). I used a little brush from my electric shaver kit which worked well. Once you've removed all the dust from the fan and surrounding areas proceed to the next step.
    9. Reapply new lubrication. You need less than 1 drop. Be sure it covers the entire fan blade axl as this is what needs to be well lubricated. Make sure there isn't excess oil that will fly around when the axl/fan spins at high rpms. I used the only oil I had which was olive oil (for cooking!) but I do not suggest this. At the time I was doing this I didn't know my fan was the problem so I wasn't even sure I was going to relube it. You should probably use something more appropriate perhaps like 3 in 1 oil. A good idea would be to call the manufatures of these little fans and ask them. Maybe a hobby store knows of good lubricants for these purposes?
    DO NOT use things like WD 40 as it's not a long term lubricant or so I've read.
    10. Once your fan is now clean and oiled (make sure there isn't too much oil) reassmble the fan.
    Push the fan blades/axl back into the housing shaft. Give it a few spins with your finger.
    Screw together the fan housing then reclip the clips.
    11. Place the now reassembled fan back into your Mac and screw it in place (3 screws).
    12. Reattach the fan's electrical wiring by gently pushing it into place. Make sure you've got the right end facing down before you push it in place.
    13. Once your Mac's internals are clean and reassembled, place the rear cover back on your Mac and screw it in place.
    14. Double check you didn't forget anything like screws, tools, etc.
    15. Boot up your Mac and monitor the temperature and fan speed using those programs.
    Compare the previous temps/fan speed to the current temp/fan speed.
    Run a high CPU intensive app where your computer has been slowing down.
    You should now have a happy Mac
    If you have this problem and this solution fixed it for you please post in this thread letting me and everyone else know!
    Hope that helps.

    Thanks for your lengthy reminder dude, I have a similar Mac with yours. I suspect its a software fault because it happens after I upgraded to Lion, 10.7.2.

  • Mac Pro 2.66 (2006) CPU Temps

    It's been a while since I took a look at the my temps and what not using Hardware Monitor but the other day I reached behind my Mac Pro... it seemed to me that it was awfully warm... so it peeked my curiosity...
    Today I checked and my CPU temps are all around 135F... as I said, it's been a while since I looked but I seem to remember them being sub-100F at idle...
    Am I not remembering correctly?
    Thoughts?
    Thanks!
    -Justin

    See if installing SmcFanControl 2.2+ to create profiles and change default fan speed works, changes the fans.
    Rather than wait for the system to heat up, switch to a higher rpm profile for that purpose, say 900-1000 rpm is still just barely audible but moves much more air and cooling. 1200-1500 for high.
    Once the fans kick in, or cpus are under a work load, it can end up being cooler than it was.
    The new 2009s with HT can be forced to use more power, create more heat. For 2006, the big issue is/was the ATI X1900 and clogging with dust and overheating, which needs to be pulled and cleaned every 3 months.

Maybe you are looking for