Higher Eucation condition type for services
Dear All
SD CIN (Country India Version) experts pls help me out to know the condition type for higher education cess for services
regds
mujju
Hello,
please have a look at the note 1032265. This is a master note concerning your request.
Hope that the information are helpful.
Regards
Claudia
Similar Messages
-
Condition Type for Service PO Items
Hi all expert,
May i know that where to define the condition type for Service PO items?
For item of service PO, there have Service Tab, under this tab, there may have few items and each of the item have condition type. thus, i would like to know that where to define this condition type. it is because i found that this condition type is different with PO condition type.
Hope can get ur reply soon.
Thanks~Hi,
Appreciated for your reply:)
I am confusing on "Variable Condition Schema For External Service" Step, as i view from the table, it seem look like a access sequence and assign to which document type to use pricing procedures.
If let's say i assigned this pricing procedures to PO category and normal PO document type, then does it crash with condition type which config for normal PO (Condition Tab of PO)?
if i assigned my procedures at "Variable Condition Schema For External Service" Step, where i can view my config result?
Waiting for your reply.
Thanks:) -
STD CONDITION TYPES FOR SERVICES
What are the std Condition types for
Service tax =
EDUCATION CESS ON SERVICE TAX
SECONDARY EDUCATION CESS ON EDUCATION CESSHi
You can use J<b>CES JCED for CESS
and JECS JECX for EDU-CESS
For further details Refer sap help doc below
http://help.sap.com/erp2005_ehp_02/helpdata/en/0e/db7eb4e9114d85a9335fb1df617504/frameset.htm -
Condition types for service tax
Hi,
We are configuring the system for TAXINN.
Which condition types to be usd for service tax, ECess on service tax and HECess on service tax?
are their any standard condition types for it or we need to create those?
Regards,Hi,
For Deductible;
JSRT IN:A/P Service Tax %
JEC3 IN: A/P ECS for ST %
JES3 IN:A/P SECess on ST
For Non-deductible; (Copy of Above with A/c Key "NVV")
ZSRT IN:A/P Service Tax %
ZEC3 IN: A/P ECS for ST %
ZES3 IN:A/P SECess on ST -
MM-PUR default scales for condition types for service (ME31K
Hi,
We have faced the following problem:
The business case was, to have default scales for certain condition types for a service for a purchasing contract.
We didn't find it in SAP, so we wrote an OSS. SAP answered that it's not possible now, nor in the future.
So we decided to look around in SAP, and found out that it was half possible.
I've abused the exit USEREXIT_XKOMV_BEWERTEN_INIT of program RV61AFZB.
In this exit I provide the internal table staffel for program SAPMV13A with the correct information (via ASSIGN ('(SAPMV13A)STAFFEL[]') to <staffel>.)
In this way, if a user adds a service, this exit will get reached and the scales are filled. If the user then clicks on conditions and then double clicks the condition type with the scales, all the default scales are shown to the user. If you then click on save, the next screen is the service screen, if you then click on save again, all the date is stored in the database. (bit of a work around, but this works)
However, I can't figure out how to save the scales data, when you only add a service and then push the save button without viewing the conditions. Quite logically actually because I'm skipping two whole screens with pbo and pai modules, in these modules internal converting takes place.
Has anyone encountered this problem before and how did you solve it then ?
Alternatively what is the SAP standard way to add pricing condition scales on condition types of a service of a purchasing contract? As you know there is no BAPI yet to change/create a purchasing contract.
I was thinking, to add the scales by updating the tables directly via ABAP, I know that's not a clean way to do it, although it isn't too risky.
Kind regards, Rob DielemansDear Rob,
Is this solution properly working for you?
I think my problem is similar: purchasing outline agreement (contract) refuses to apply relevant scale prices in the item line. Always uses the first price - without considering order quantity depencies.
Regards,
Tamás
Edited by: Tamas Szabo on Mar 31, 2009 3:50 PM -
CIN Higher Education cess condtion type for service
Dear All
SD CIN Experts Pls let me know the Tax condtion type for Higher Education Cess for service
thank
mujjuThere is no condition type for Higher edn cess in the standard system. SAP suggests creation of a neew one and assiging it to AT1. So go ahead and create a condition type by copying the ECS condition type and renaming it. Ensure that you tick the laible for At1 to be ticked and also in the deafault condition types put the Condition type in the AT1 field. Also do the account detemination for AT1 accounts for Rg23A,C and PLA. This will configure the S&H ECS.
regards
Jude -
Wrong calculation for condition type for misc. provision in service PO
Hi Gurus,
In service PO line item, we have maintained customised condition type for misc provision. this is % based on net price. It has been assigned account key and accrual key. It's manual. Logically, it should calculate the value based on the total of the net values of all service lines and post a single entry for all concerned service lines. What system is actually doing, it calculates the value correctly for total of net values of service lines in that PO line item but post it to the account as many number of times as the number of service lines in that line item.
This is when service based IV is active for the PO line item. If I deactivate this, then it post the account once only which is ok.
Please explain this behaviour. Also, I want to activate service based IV, what should I do to this condition type. Is there any condtion base formula or condtion value formual to be assigned in the pricing procedure?
Thanks in advance,
Sudhir DahakeHi,
Check if some user exit/ routine is written for the condition type.
Check user exit RV60AFZZ, RV60AFZA, RV60AFZB,RV60AFZC for some code.
If it is a manual condition check COPY CONTROLS or if it is automatic check condition records from which it is calculated based on qty, price, material type, etc.
Regards,
Amit -
Condition Records For Tax Condition types for SAP 4.7
Dear Experts,
What is the procedure to maintain condition records for tax condition types like CST , VAT and Service Tax. We are not using CIN. In MM01 and XD02 tax classifications i have maintained UTXJ condition Type and also maintained the above mention tax condition types.. But when i create condition records for UTXJ in VK11 the sysytem is asking for Tax code. In FTXP when i defined Tax code A1 for Tax ProcedureTAXIN1 where i maintained all the Tax condition types there.But i am unable to save the Tax % in FTXP.When i try to save the tax code it is not saving.
Is there any other procedure to maintain Tax condition types for SAP4.7.
My Pricing procedure that i maintained in V/08 is Z00001.
Regards
JyotiHi Jyoti
Since you are not using CIN, you can do the follwing for tax conditions
Check the assignment of the TAx procedure to country
once u do this , you will be able to maintin the vendor and customer records for MWST type for taxes
then create condition records for MWSt with access sequence MWST in condiution type or design one suited to your needs
alternatevely in the current procedure you can change access sequence for condition type UTXJ form the current one to MWST and then maintain condition records
hope this helps
thanks
Akasha -
Condition type for rounding-off
Dear all,
Is there any pricing condition for rounding off the PO values,
For example if the total PO Value is comes Rs 5990/- & i want to make it Rs 6000/-.In the same way i want to deduct some amount to make the rounding off like total PO Value comes as Rs 10015/-, & i want to make it Rs 10000/- by applying the same condition.
Or Can i create a new condition type for this type of scenerios.
Quick reply will be highly appreciated.
Thanks & Regards
Prasant sekharin condition type u have a filed for rounding off
so use the relveant option from f4 help in that field and u can round of the value as u want to be
go to tcode m/06
and select ur conditoin type and click on the detail button and do the relevant settings -
Hi,
Is there any Standard Condition Type for VAT (both deductable & non-deductable) & Service Tax?
Also we want to maintain excise related information thru J1ID for Materials to be procured externally from vendors. Is there any additional configuration to be done?
Regards,Dear Aditi,
Please find the following details as required by you
Conditions related to VAT:
JVRD- A/P VAT RM Deductibl (JVRD is with reference to JIPC)
JVRN-A/P VAT RM Non Deduc (JVRN is with reference to JIPC)
JVCD-A/P VAT CG Deductibl (JVCD is with reference to JIPC)
JVCN-A/P VAT CG Non Deduc (JVCN is with reference to JIPC)
JVCS A/P CST Non Deductible under VAT (JVCS is with reference to JIPC)
JSTX-A/P ServiceTax (JSTX is with reference to JIPC)
You will have to incorporate it in TAXINN
And you will have to maintain the Conditon for Plant/MAterial and vendor combination in FV11
with % of VAT and TAX code (it can be created by FTXP (input/Output tax))
Account keys for The Above condition types
EC1 A/PE-CessExcise
EC2 A/PECess-ServiceTax
EC3 A/PSECess-ServiceTax
ESA Outputacquisitntax
ESE Inputacquisitntax
JI6 A/PSECEss
JP4 A/PCSTNonDeductib
JP5 A/PVATRMDeductibl
JP6 A/PVATRMNonDeduc
JP7 A/PVATCGDeductibl
JP8 A/PVATCGNonDeduc
NVV Non-d.inputtaxdist
ST1 A/PServiceTax
VS1 Salestax1
VS2 Salestax2
VS3 Sales tax 3
VS5 InputTaxPSTGross
VS6 InputTaxHSTs/a
VS7 InputtaxGSTs/a
Hope it will help you
Regds
shailesh -
Creating a output type for service PO
Dear All,
I want to create a Output type for Service PO, Can any one tell me step by step process.
Regards,
Thanuskodi T.Hi Antony,
I have maintained the same access sequence i.e. 0001 and also the combination for condition control in MN04 is maintained same i.e. Document type as maintained in NEU and same for ZNEU.
Still I am not getting automatically, though while putting manually in Message in PO, it's picking perfectly and doing fine for rest of the cycle.
Pl help.
Regards,
Jyoti Bhusha Sharma -
List of sales condition types for a material
Hi,
I have a material and maintained pricing and discount condition types for that material. I guess VK33 helps to view what condition types maintained for that material.
However when I tried VK33 and selected the material from the conditions from the node on the left hand side and entered the sales org, dist. channel and material and executed after I clicked on the display icon on the condition type, Sales org, Dchl material no conditions are displayed.
Please let me know how I can view the list of sales condition maintained for a specific material.
Thanks.Hi Giri,
Thanks for the response.
In VK13 I should enter the condition type then I can hit condition information so that the details of all records maintained for a specific condition type will only be displayed but not for other condition types.
In V/LD, I am getting the list only for individual prices. If I insert 17 u2013 Discounts and surcharges by customer or 18 u2013 Discounts and surcharges by material, I am unable to get the list. Is it anything because of the u2018release statusu2019? We had not checked the u2018release statusu2019 field for the tables assigned to access sequence for the condition types.
As per the requirement business wants to view the list of u201CDiscounts and surcharges by customer/materialu201D. I think this is possible if I run the report provided by inserting values 17 or 18 but the unable to view the list. Any config settings required to activate?
Please let me know how to view the list of condition types.
Thanks -
New Condition type for pricing
Hi,
I have a requirement wherein I want to create new condition type for add on cost of material with manaual entry . this condition is to be given in inforecord.
How to proceed? also, this contion type to be inserted in pricing schema??Dear Smitha,
You may ask what is the condition type?
For example:
- discounts, surcharges or tax taxes add to net price
- delivery costs, cash discounts add to effective price
Discounts or surcharges may be percentage based, quantity dependent, or absolute.
Best Regards,
ian, Wong Loke Foong -
New condition type for freight
hi,
i want to create new condition type for freight like some different ways of transportation like (roadrailair), three are at a time, which user exit i want to take and where it will triggerhi,
as you have to have three condition types for sales order
ROAD - VENDOR1 - ZVE1
RAIL - VENDOR2 - ZVE2
ROAD - VENDOR3 - ZVE3 - into sales order.
create a screen exit and add this in your delivery addational tab page - MANUAL ENTRY BY THE USER.
with
LEG 1 - ROAD - VENDOR1 - ZVE1
LEG 2 - RAIL - VENDOR2 - ZVE2
LEG 3 - ROAD - VENDOR3 - ZVE3
create a Z table which captures the information for this.
and link this table to FB70 - t.code
and settle it individually as per FFA.
balajia -
Hi,
I have got a scenario where the customer is going to maintain "Z" condition types for a material(1 for sales price and 1 for purchase price). I can read the correct price for this material at the Sales Order maintenance and PO maintenance using some standard function modules
SALES_CONDITION_READ/ME_PO_PRICE_SIMULATION.
as these condition types are maintained in the pricing schema and hence are returned in the correctly.
I have problem when I try to read the purchasing price for this condition type(material) while creating the sales order. Here I have only the material information to read the price. Can anybody suggest how I can read the correct purchase price while creating the sales order.
Thanks in advance.
Best Regards
MalthiHI Malthi
I would recommend you use BAPI: <b>BAPI_SALESORDER_SIMULATE</b>. This will give you the conditions how the sales order is going to look when itz created.
This BAPI is mainly used for:
1. Checking ATP Qunatities
2. Conditions/Prices
Hope this helps.
Kind Regards
Eswar
Maybe you are looking for
-
How can I to send an email with a longer than 50 characters subject?
I'm trying to send an email through an abap program ( report ), but when the email arrives to the SOST transaction the subject is cut to 50 characters. How can I send an email with a longer than 50 characters subject?
-
Exception in thread "main" oracle.apps.fnd.cache.CacheException
Dear Experts, I am getting the below error. $AFJVAPRG -classpath $AF_CLASSPATH -Dprotocol=imap \ -Ddbcfile=$FND_SECURE/TEST.dbc \ -Dport=993 -Dssl=Y \ -Dtruststore=/home/applprod/.keystore \ -Dserver=xxxxxxxxxxxxx \ [email protected] -Dpasswo
-
Accessing photos outside of iphoto
I would like to be able to access photos in the iphoto library without having to export them or create a separate file. Though I like how iphoto organizes and displays photos I tend to use my photos outside it- using the as part of artwork in photosh
-
How can create and change PCA line items.
How can create and change PCA line items. Please tell me the process and t.codes.
-
Dreamweaver CS4 RDS not working with CF9
While on CF8 Enterprise (Jrun4 multi-server edition) I had a vendor sandbox established and they were connecting flawlessly via RDS. The vendor also has DW CS4, and I could duplicate their connection from my CS4 locally with no problem. Now I recent