Highlight boxes show in preview but not in published work - Captivate 5

Hello,
I'm hoping someone can help me with this as I'm utterly confused at the moment. I'm working on a software simulation and have been working alot with highlight boxes. I have done at least 3 modules (25-60 slides each) with highlighting and haven't had a problem until now. My problem is that I can't get the highlight boxes to show up on the published document. This is only for 1 single slide! All the rest work!! When I preview in the program the boxes show up and work perfectly but they don't show up in the published doc. I have duplicated slides and rerecorded that specific slide and nothing works. Any theories??
Please help!

Hi there
The image isn't crystal clear, but it would appear the top element is a Click Box configured to pause the slide at 1.5 seconds? Again it's difficult to see because it's not exactly clear, but it would also appear that your highlight boxes aren't configured to present until about 6 seconds in. So in this case it would seem the Click Box is pausing the slide too soon. Try adjusting the timing of the Click Box.
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

Similar Messages

Works in preview but not when published in captivate 8?

My youtube widget used in captivate 8 works just fine in the preview, but when published there's nothing where the video should be, any idea as to why?

Hi Robert,
as far as I understand your post, you are missing some kind of "button-artwork" in the published file, but do not report a problem with the "action" that the script should perform.
My guess would be that it will be hard to help you without having a better understanding what your trying to achive and how (are you using a prebuilt component, or did you build the button fron scratch etc....)
It might be even necessary to have a look at the fla itself.
M

Button hyperlinks work in project preview but not in published .swf

Captivate 6, button hyperlinks work in project preview but not in published .swf, the cursor changes the “the hand” but the hyperlink does not redirect.
Any ideas?
Like I said my buttons work great in preview mode after publishing, one click and the PDF opens in a new browser window. Open the project through the published .swf files and the links will not work.
Using Captivate 6 on WIndows 7

Hello,
Welcome to Adobe Forums.
Once your project published, add the .swf file in Flash Global Setting :
1) Right Click on the content (Published .swf file) and click on Global Settings
2) Go to Advanced Tab and Click on Trusted Location Settings (Scrool down to see this button)
3) Click on "Add" button and then "Add file", browse for the Captivate 6 published file and click on OK
4) Launch the .htm file again (Location where Captivate publish your project)
Hope this helps !!
Thanks,
Vikram

Load swf works in Publish Preview but not when published

Hi Folks,
I having a problem where im trying to load two 1mb SWF movies into my Flash piece. It works fine in Publish Preview but not when I finally publish. I get this error in IE:
SecurityError: Error #2000: No active security context.
I have googled around and there is some talk online of a hack where by you get a timeout to overcome this. However im not so technical do I dont really know how to do this to my code in AS3. My code at the moment is below.
Any help would be much appreciated and rewarded with Karma
movieClip_12.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_9);
var fl_Loader_9:Loader;
//This variable keeps track of whether you want to load or unload the SWF
var fl_ToLoad_9:Boolean = true;
function fl_ClickToLoadUnloadSWF_9(event:MouseEvent):void
if(fl_ToLoad_9)
fl_Loader_9 = new Loader();
fl_Loader_9.load(new URLRequest("search.swf"));
addChild(fl_Loader_9);
else
fl_Loader_9.unload();
removeChild(fl_Loader_9);
fl_Loader_9 = null;
// Toggle whether you want to load or unload the SWF
fl_ToLoad_9 = !fl_ToLoad_9;
movieClip_14.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF_10);
var fl_Loader_10:Loader;
//This variable keeps track of whether you want to load or unload the SWF
var fl_ToLoad_10:Boolean = true;
function fl_ClickToLoadUnloadSWF_10(event:MouseEvent):void
if(fl_ToLoad_10)
fl_Loader_10 = new Loader();
fl_Loader_10.load(new URLRequest("refunds.swf"));
addChild(fl_Loader_10);
else
fl_Loader_10.unload();
removeChild(fl_Loader_10);
fl_Loader_10 = null;
// Toggle whether you want to load or unload the SWF
fl_ToLoad_10 = !fl_ToLoad_10;

I think this is either a problem with my site preLoader or my external .swf Loader. I was checking out the bandwith profiler and saw something weird and I wondered if anyone could explain...I've added a picture. I have a blank frame on only my actions layer to export classes to and it seems that frame 2 is "bleeding" into frame 1. Could this be my problem? Why would this happen? Thanks

PayPal button action works in preview but not when published

Hi!
Any thoughts as to why this works correctly in CS5 publish preview but when I publish it I either get no action or (XP comupter) or a blank page (vista). Any thoughts or insight would be appreciated. Also, I'm new to flash and here's the button action:
on (release) {
        //create the LoadVars that will hold our paypal information
        var paypal = new LoadVars();
        //specify the business, amount of the item, shipping, etc.
        paypal.cmd="_xclick";
        paypal.upload="1";
      paypal.business="[email protected]";
        paypal.currency_code="USD";
        paypal.amount="275.00";
        //paypal.handling = "0";
        //paypal.no_shipping = "0";
        paypal.item_name="One Session";
        //added
        //paypal.lc="GB";
        paypal.bn="PP-BuyNowBF";
        //paypal.no_note="1";
        //send our information to PayPal, including all the optional variables we have collected from customer
         paypal.send("https://www.paypal.com/cgi-bin/webscr","_blank","POST");
Thanks!
Robert

Hi Robert,
as far as I understand your post, you are missing some kind of "button-artwork" in the published file, but do not report a problem with the "action" that the script should perform.
My guess would be that it will be hard to help you without having a better understanding what your trying to achive and how (are you using a prebuilt component, or did you build the button fron scratch etc....)
It might be even necessary to have a look at the fla itself.
M

Comments show in iWeb, but not on published site (on Mobileme)

Does anyone know how I can get the comments I see on my blog entries in the iWeb app to show up on my website when published (I'm using Apple's Mobileme service).
They have always worked in the past, and I recently redesigned the site. I changed the theme from a predesigned one to the blank white one (and then designed my own look). As stated before I can see the people's comments in iWeb, but when I published all the previous entries (in the new design), the comments aren't showing in the archive page nor the individual entry pages. Is there a fix?

Oh, rats. Do I need to remove the folder that I published to? I'm not even sure where to find it. I have republished successfully with the comments still in iweb but they don't show up on-line. I'd really like to get them back on if possible.

Masking works in preview but not when published

I am dynamically loading higher-res images into a movie clip
that
correspond to the place in a 360 degree rotation the main
clip is at,
then resizing that movie clip to "zoom" the image. Since I
don't want
to overflow the whole screen, I've created another movie clip
that
masks the loader movie clip.
When I preview the flash file, it works perfectly. When I
publish the
file, the mask doesn't get applied. Thoughts?
zoom_btn.onPress = function(){
if(iszoomed == false){
loadMovie("zoomimages/" + Math.floor((_currentframe-4)/3) +
"big.jpg", image_mc);
stop();
zoom_btn.onRelease = function(){
if(iszoomed == false){
Loading progress loop begins, extra code
removed...
if (pcLoaded >= 99){loader_mc._alpha = 0;
image_mc._visible = true;
myMask_mc._visible = true;
image_mc.setMask(myMask_mc);
.....Loading progress loop ends}
iszoomed = true;
}

Hi Robert,
as far as I understand your post, you are missing some kind of "button-artwork" in the published file, but do not report a problem with the "action" that the script should perform.
My guess would be that it will be hard to help you without having a better understanding what your trying to achive and how (are you using a prebuilt component, or did you build the button fron scratch etc....)
It might be even necessary to have a look at the fla itself.
M

How do you get your email content to display? Mine shows in preview but not when I open the email, How do you get your email content to display? Mine shows in preview but not when I open the email

How do you get your email content to display? Yesterday, I suddenly could only see the content in preview.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

Page background images show in preview but not after uploading

Hi -
I've built a page with a flash animation, and some other
minimal information below the movie. I have a page background image
that should be repeating horizontally behind everything. When I
preview it, all looks great! After I upload it to the actual site
the background images disappear. The code is all within the page.
Any ideas?

never mind... problem resolved.
my error in not checking my files over. oops.

Photo shows in preview but not in camera roll 5s

I take a picture with my iphone 5s and I see the photo in the preview. When I go to click the preview, it goes to my camera roll and I can't see the photo I just took. I do see the previous picture.

Hi there twinklethumper,
I would recommend taking a look at the troubleshooting steps found in the article below.
iCloud: Troubleshooting missing information after restoring an iOS device
http://support.apple.com/kb/TS4605
-Griff W.

Website displays fine in Preview but not when 'Published' to BC

Hi
I've posted this question twice in the Adobe Muse discussion forums and had zero response so hopefully people with more experience form the BC perspective might be able to shed some light on this.
Basically I have a subscription to Muse and with that the ability to host one site with Business Catalyst. When checking the first site I designed I'd use 'Preview in Browser' and the site occasionaly displayed incorrectly, so I changed my habits to publishing the work-in-progress site to the BC url with this current site.
Unfortunately there are multiple display problems with doing this; the two images below show the difference between 'Publish' to the BC domain and 'Preview site in browser'.
I've cleared the cache of the browser multiple times and used both Firefox and Safari and the problem still remains. I'm assuming it's a problem with Business Catalyst?
Does anyone have a solution for this? Has data become corrupted in BC, and if so is there a way of 'flushing' the data held on the BC site clean to start from scratch?
Would really appreciate some help here as it's impossible to show my client the current state of the site
Thanks in advance
Phil

Hi Liam
Tried it in Safari and Firefox (I'm on a Mac), cleared the cache and still was getting issues.
http://httpwiles06businesscatalystcom.businesscatalyst.com/clients.html
If you go to the client page there I'm getting the images behing strangely like the top pic I posted, also the top type image has moved over.
i set up a subdomain on my own site to use as a test space for this client site and it works perfectly; that's on
http://martinedwardstest.phunction.net/
Appreciate any fedback, opinions or help on what might or might not be wrong.
Cheers
Phil

SWF plays in preview but not when published

I have seen similar issues posted but none dealing with this
precise problem. I have two SWFs, one of which loads at the end of
the other. When SWF 1 is played back in Flash or when published in
HTML format, SWF2 plays as is should. When SWF is exported to
another program (e.g. Frontpage or Ektron, CMS), SWF2 will not
play. Interestingly, when SWF2 is exported to the other program on
its own, it plays fine so font support is not an issue.
I have also tried altering the level in the LoadMovieNum
script (0, 1, 2) as well as republishing both SWFs from the
original FLA file. So far zippo.
Any ideas??

At least on my side it only plays the first video and does not progress. There are twenty-five videos after this, they are all very short but they progress. Is this progressing for you? Perhaps it is my computer if so. Please let me know.
Thanks again,
Mark.

Unchecked show icon preview but still showed icon preeviews / ikon preview (thumbnail) can not disable,

Systems and Network
2 iMac Intel i5, 8 GB Ram, 1 TB SATA HDD, Mountain Lion (10.8.5 or 10.8.4 )
1 iMac Snow Leopard (10.6.8)
1 Mac pro Intel Xeon, 6 GB Ram, 1 TB HDD, Tiger (10.4.11)
A few power PC G4 Tiger (10.4.11)
1 Linux SME Server 7.5 (Samba Server)
We are works on the Server(Linux). There ara many pictures and Text Files (tif, jpeg, rtf, doc, txt etc.) in server folders.
     On the 2 iMac (Mountain Lion)
          Text files in the folder have viewed normal(optimum) time. But Pictures in the folder have viewed very slow and very long time.Because showing pictures icon (show icon preview) very slow on the Mountain Lion. We tried List View/ColumnView.We have waited very long time(for pictures in the folder) when we selected a folder every time.
          We unchecked show icon preview but still showed icon previews, icon preview (thumbnail) can not disable, We tried "Finder preferences", "View > Show View Options > Show icon preview(unchecked)" and "Show icon column(unchecked)" but still "Show icon preview(checked)" and "Show icon column(checked)"
     On the Power PC G4, Mac pro or iMac (Leopar/snow Leopar or Tiger)
          Everythings ok. There isn't any problem. Text files and Pictures in the folder have viewed normal(optimum) time
This problem only on the Mountain Lion, on the other OS (Leopar/snow Leopar or Tiger) no problem.
How to resolve this problem?
Best Regards

Good news: I found a solution.
Start iTunes, remove all your voice memos from your library (back them up if you need them), quit iTunes. Restart Finder. Done. I hope that helps!

Captivate 3 shows skin in preview but not when I run after published?

Captivate 3 shows skin in preview but not when I run after published. It shows it is included, what's up?

Is the Skin externalised? If so, perhaps Flash Global Security is interfering:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/how-to-set-up-flash-global -security
You could also try NOT externalising the skin.

Getting values in preview but not on paper

hi gurus,
the variables on a window is showing values in preview but not on paper the window is above a top-left portion of other window..
i need to display those variables on paper at print time...as alignment is perfect ..suggest me how to do?
thnx in advance!!

DEAR SEE THE POSITIONING OF WINDOWS,
FOR THE BOTH WINDOWS WHICH ARE COLLIDING,
GO TO OUTPUT OPTIONS AND MAKE UPPERMARGIN AND HEIGHT IN SUCH A MANNER THAT THEY NO LONGER COLLIDE.
SEE THE OUTPUT.
I THINK THEY ARE COMING NOW.
REWARD IF USEFUL.
aMIT sINGLA

Highlight boxes show in preview but not in published work - Captivate 5

Similar Messages

Maybe you are looking for