Highlight Text for Lookup Fields

I hope this question isn't too silly.
I have a large database that I have used the wizard to create a look-up table for one of the repetitive fields. The text names are now all numbers in the primary table and at run time are displayed as text via the look-up table. Everything works very well the only thing I would like to do is to have the 'Highlight Words' work when I do a search. Usually something like '&P42_REPORT_SEARCH.' works. The problem is that the database table does hold those values any more. Does anyone have any ideas?
Kind Regards,
Steve Welch

Similar Messages

HOw to find the text for PERSK field in infotype 0001

hi all
HOw to find the text for PERSK field in infotype 0001

Hi
T503T : contained the similar informative text for PERSK . read this for T503T-PTEXT.
..lakhan

Highlight text for Print

I am trying to find a way to be able to highlight text in a document and and then print it with the text highlighted (as you would when reading an article and marking thru important points with a pen highlighter) Also how would I highlight multiple but different text lines so that they all show? I can't seem to find a key that will allow it. (ie. control or option key)
Thanks for your advice,
Glen

ApleWorks doesn't provide for any method to directly "highlight text for printing," or for display on a monitor, for that matter. The 'highlighting' you see after dragging across a line or block of text is an indication that the text is Selected, and may now be manipulated, but tat highlighting will not appear on a printed page.
You can "place a colour block behind" the text to create an effect similar to running a hi-liter across the text on a printed page, it's fairly easy, and the result will print.
Show the Tools palette (Window > Show tools, or click the red toolbox at the lower left of the document window).
Use the Rectangle tool to draw a rectangle that just covers the text you want to highlight.
Use the Fill formatting button then the color palette to select a highlight colour. Repeat using the formatting button then the color palette to set the line colour to the same value as the fill colour.
Copy the rectangle so that you can re-use it.
Go Arrange > Move to back to place the rectangle behind the (now highlighted) text.
Still in Draw mode (you should have the Arrow mouse pointer—if not, click on the Selection tool {arrow} in the tools palette), Paste another copy of the coloured rectangle, drag it to the next line of text you want to highlight, and adjust the length to cover the text to be highlighted. Move to back as above. Repeat as necessary.
NOTE that these rectangles are not part of the text, but floating objects. If you edit text above the highlighted portion, change fonts or size, or change style (eg. to bold), the text to be highlighted will move, but the rectangles will not. Best to leave this highlighting until you've finished otherwise revising text.
NOTE2: When resizing small rectangles like this, it's easy to change their height when trying to change only their length.
TIP: When you have one the right size for the text size and font you are using, select it, then go Options > Object size... and note the height of the object, reported in the second box in the right column. For subsequent highlight rectangles, after adjusting the length to fit the text to be highlighted, open the Object size dialogue, enter the correct size into the Height box, then press tab to confirm the entry.
Regards,
Barry

Crawled Property - Related fields for Lookup Fields

I have two lists -
List1
AuthorName
AuthorCountry
List2
Book
AuthorName (lookup from List1)
AuthorCountry (additional field from List1 based on lookup field AuthorName)
I can see ows_AuthorName as a crawled property. But if I want to get the associated AuthorCountry is there a way to get it? Even though I have a column for related AuthorCountry field there is no crawled property for it.
Thanks in advance,
Jake.

If you create a Site Column and add it to the list instead of a regular list column, it automatically creates a corresponding crawled property & managed property. this would be the easiest
automatic creation of crawled properties:
http://technet.microsoft.com/en-us/library/jj613136(v=office.15).aspx
SP2013 Search Schema Management (crawled/managed property management):
http://technet.microsoft.com/en-us/library/jj219667(v=office.15).aspx
Christopher Webb | MCM: SharePoint 2010 | MCSM: SharePoint Charter | MCT | http://christophermichaelwebb.com

Highlighting TEXT - not the field - and clearing the set value for a new one

I have a form in which various text fields are set with a message to inform the user as to what kind of information I want typed in. My goals are:
1. Have the text get highlighted so when the user starts typing, the "old" value gets replaced with the "new"
2. Or, when the user tabs or clicks in the field all of the "old" value is deleted and they can start typing the "new" value from the beginning of the field.
I am trying to eliminate having to manually highlight the field in order to type in the needed information. But each field needs to start with a value so the user knows what kind of information I am looking for.
Does this make sense? By the way, I have no JavaScript experience...uh oh!

Use the Media Manager (under the File menu bar item).
Link:
What Can You Do with the Media Manager?

How to change heading text for parameter field of type date

Hi,
    After creating a parameter field with the type " Date Time" when I open the report for entering the parameter then it displays the given parameter with the following text:
" Please enter Date in format "yyyy-mm-dd". "
I want to change it to some other text like as:
" You have to enter the date and time in format yyyy-mm-dd . "
Is there any way by which I can change this given header to some other text.
Let me know if anyone needs some more information in this regard so as to solve my given query soon.

Hi Garrett,
              Well first of all I can change only the prompt text that is user defined. I cannot change any parameter as of now whose type is let suppose Date. Since in this case the Business Object itself shows the text which is something like this " Please enter Date in format "yyyy-mm-dd". " .
   Here I want to change this given text to some other format like " You have to enter the date in the format yyyy-mm-dd" or in any other manner.
Also the current Crystal Report version which I am using is 11.0.0.1282.

Long text for a field in Additional Data tab of DMS

i have a field in additional data tab called Name , how can a long text be assigned to that field

Hello Mr. Vijay,
Classification Configuration master data which we need in Additional Data tab. Presently In our SAP system we have limitation for just 30 character for each characteristic if i correct just confirm me please
Regards
Arun kaul

Drill down report display of text for z fields

Hi All,
I am workig on Drildown Reports.
The report is working perfectly and it is dispaing the output correctly.
I am able to see my Report output in Grid dispay.
The probem is I have some Z fields in my report.
Whn i am dispaying with Charactersic Display-->Key and Name
For the standard fields i am able to see the vaue and its description but i am not able to see the description for the Z fields.
What would be the probem.
This fields has the checktabe with the Text.
Please help me.
Thanks,
Feroz.

hi
check whether the z field is attached with the same table or structure.
Edited by: AP on Mar 18, 2009 5:12 AM

Header Text for Standard Field

I have a standard text field in RQEVA structure and field is SGTXT04 ,I want to fetch data from this field using READ_TEXT but for this I m not able to get the Header text information like ID,Name ,Object.
Please suggest how to get these information for this feld which is in QA11 used for Rejection Reason.

Its still not working, need ur help
I just want to tell you one more thing is that the field SGTXT04 is standard text field
I have written this following code :-
DATA : begin of IT_QALS OCCURS 0,
PRUEFLOS like QALS-PRUEFLOS,
end of IT_QALS.
data : begin of IT_QAVE OCCURS 0,
kzart like qave-kzart,
end of IT_QAVE.
PARAMETERS: S_PRUE LIKE QALS-PRUEFLOS,
            S_KZART LIKE QAVE-KZART.
SELECT PRUEFLOS FROM QALS INTO corresponding fields of IT_QALS where PRUEFLOS = S_PRUE .
ENDSELECT.
SELECT KZART FROM QAVE INTO corresponding fields of IT_QAVE where KZART = S_KZART .
ENDSELECT.
data:
        BEGIN OF header OCCURS 0,
          ld_txt1(163),
          ld_txt2(163),
          ld_txt3(163),
        END OF header.
DATA: li_lines LIKE STANDARD TABLE OF tline WITH HEADER LINE,
        ID like THEAD-TDID,
        TNAME LIKE THEAD-TDNAME,
        TNAME1 LIKE THEAD-TDNAME,
        TDOBJECT like THEAD-TDOBJECT.
        concatenate sy-mandt IT_qals-prueflos IT_qave-kzart into TNAME1.
        ID = 'QAVE'.
        TNAME = TNAME1.
        TDOBJECT = 'QPRUEFLOS'.
CALL FUNCTION 'READ_TEXT'
    EXPORTING
      id       = ID
      language = sy-langu
      name     = TNAME
      object   = TDOBJECT
    TABLES
      lines    = li_lines.
READ TABLE li_lines INDEX 1.
IF sy-subrc = 0.
    header-ld_txt1 = li_lines-tdline.
ENDIF.
READ TABLE li_lines INDEX 2.
IF sy-subrc = 0.
    header-ld_txt2 = li_lines-tdline.
ENDIF.
READ TABLE li_lines INDEX 3.
IF sy-subrc = 0.
    header-ld_txt3 = li_lines-tdline.
ENDIF.
WRITE:/ header-ld_txt1.
WRITE:/ header-ld_txt2.
WRITE:/ header-ld_txt3.
Edited by: Nishantbhargava on Aug 1, 2011 9:30 AM

Feature request...rich-text for notes field

I hope Adobe reads these posts! Notes in Presenter would be much better if they accepted rich-text. This only makes sense since the Notes field in PowerPoint is rich-text. Please add this feature in future releases.

Hello,
You could get directly to the Adobe team if you filled out a proper feature request. Here is the link:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&product=5
Then you will be sure that they read your request, and they do, believe me,
Lilybiri

FB60: how to block the list of possible texts for the field "Text"?

Dear Experts,
In FB60, i want to restrict user to select line item text field (SGTXT) from search help only. Is their any way to restrict?
Thanks in advance,
Denish Patel

This thing is possible with BTE.

Need to display text for the field bukrs

hi
i am having a requirement of displaying (company code & descripion) from infotype pa0001
in a single field
can any one help with the code
regards
sachin

hi sachin,
select single b~bukrs c~name1
from pa0001 as a
inner join t001 as b on b~bukrs eq a~bukrs
inner join adrc as c on c~addrnumber eq b~adrnr
into (ld_bukrs, ld_name1)
where a~pernr eq '00000003'.
concatenate ld_bukrs ld_name1 into ld_combi.
regards,
Peter

Tool Tip Text for field values in ALV report

Hi,
How to get the tool tip text for the field values in ALV report.
Thanks & Regards,
Pallavi.

Hi,
In fieldcatalog specify the TOOLTIP.
<b>
LVC_S_FCAT-TOOLTIP
</b>
In this speicfyteh tooltip you want.
Then append this to the fieldcatalog.
Hope this solves ur problem.

"Additional Text" set for messageTextInput fields in Classic Table

i have set "Additional Text" for messageTextInput fields in Classic Table and am expecting that to display when the mouse is hovering on that field. however, that is not happening...
what am i doing wrong ? and what can i do to achieve that (NOTE - i cannot do either short or Long Tip because that looks wierd when data is displayed in a table (multiple rows))
thank you.
UPDATE - could anyone tell me where/when/how does the "Additional Text" data get displayed when the page is rendered ? there is hardly any info on this in the devguide and forum. If "Addtional Text" is not the right way to provide additional information on a field what else can be used (note these fields are in a classic table so i cannot use short/long tip)......
Edited by: user11972136 on Feb 4, 2013 10:33 AM

Hi,
I tried this case and its working for me.
Could you tell us what version of Jdev and OAF you are using? There might be some issue with that version.
Regards,
Sandeep M.

Header Text for Field Catalog ALV Grid doubt ..

Hi everybody
I have an ALV Grid List Report (REUSE_ALV_LIST_DISPLAY)
but i have a trouble: the header texts for the fields are always truncated to 10 positions.
The code for fill the Field Catalog are:
CLEAR l_field_cat.
l_field_cat-COL_POS       = 2.
l_field_cat-FIELDNAME     = 'AVERAGE'.
l_field_cat-TABNAME       = 'T_REPORT'.
l_field_cat-REF_TABNAME   = 'RPSCO'.
l_field_cat-REF_FIELDNAME = 'WLP00'.
l_field_cat-SELTEXT_S   = TEXT-004. <- 'AverageAmount' 20 lenght
l_field_cat-DDICTXT       = 'S'.
l_field_cat-KEY           = ' '.
l_field_cat-KEY_SEL       = ' '.
APPEND l_field_cat TO p_field_cat.
But, although the column appears with 20 characters lenght, the header text appears 'AverageAmo', and it is in the same way for all the fields, even with fields with 40 characters lenght.
What am i doing incorrect ?
Thanks in Advanced
Frank

That is because of field I_field_cat-SELTEXT_S.
This will always display 10 char long text.
To avoid truncating you can specify length for the header.
Try this
        x_fieldcat-seltext_l = TEXT-004.
        x_fieldcat-outputlen = 20.
        x_fieldcat-ddictxt   = c_l.
Message was edited by: Ashish Gundawar
Message was edited by: Ashish Gundawar

Highlight Text for Lookup Fields

Similar Messages

Maybe you are looking for