Highlighted Fields in forms to be switched off when opening a pdf form

I have created a simple form and understand that when different machines open the forms that the "Highlight Fields" is either on or off depending on how each user has their reader setup. Is there any way that when I create the form and tell reader when it is opened to have the highlight fields switched off?

Yes, but it's an app-wide setting and it's is considered "rude" behaivour
to make such changes without at least informing the user of it, or (better
yet) ask for their permission to do so.

Similar Messages

My iphone 4s camera is getting switch off when i use

My iphone 4s camera is getting switch off when i use and when i use HDR function in the camera its getting switch off after taking picture and I wont see the picture where I have taken, can any one help me out in this or I should go to service center

Uninstall the app and reinstall it. If it persists dont use it. simple

3GS switching off when getting e-mail (push)

My 3GS is going switch off when getting e-mail (push or fetch). It's happen when phone loose 3G network covering - changed to EDGE or GPRS, or during the call (3G enabled). If I switch off push and scheduled fetch here no more problem.
It's happen everywhere in the world.
Any same case or any solution?

Doses the iPhone has that option?
Unfortunately, no.

Nokia 5530 switches off when making/receiving call

Hello , i have strange problem with nokia 5530. Its just switches off when making/recieving a call. I read nokia discussion of Europe and USA. there are number users who have same problems i have it now.
I've gone to nokia care and hope they can give me a perfect solutions. As i have read all the posts about this problem , i m bit worried whether my mobile will be repaired or not. Stil now i havent found any post which 100 tells me about solution for this problem

nokia 5530, this very frusting Fone, I try to update nokia software,after which it happens again, I've tried to update, I've tried chargethen call, it happened again, this is confusing me. please anyonehelp me. I've tried to remove the micro SD, it happens again, I'veno idea how to solve, please help me, after this if not I will throwthe solution near the wall and try it, very tired, treat this nokia5530, please who want help me?

HT1386 my iphone is switched off when i started updating the new version of iphone. what is the solution???

my iphone is switched off when i started updating the new version of iphone. what is the solution???

Turn it on.
If it will not power on, try a reset by pressing and holding the home and power buttons until the white Apple logo appears.

Iphone 5 switches off when battery still has 15%

After updated to iOS 7, my iphone 5 always switched off when battery still have 15%. Anybody have the same issues?

Sounds as if the battery may need to be recalibrated. Let the battery drain until it turns off. Then connect the phone to the charger and let it charge to 100%. Disconnect and then use it. It should get it back to a better read. The batteries are designed to shut down when the battery has a certain amount of power left. The battery percentage is not always that accurate.
You can take a look at this link from Apple about batteries. http://www.apple.com/batteries/iphone.html

IPad 4 switches off when i am using it, even when battery is fully charged. Restore function (holding down both buttons) often does not work. Cannot power up iPad. I have updated software, restarted computer, but no success. Please help

IPad 4 switches off when i am using it, even when battery is fully charged. Restore function (holding down both buttons) often does not work. Cannot power up iPad. I have updated software, restarted computer, but no success. I did restore the iPad about 8 times during the past 2 weeks. Just completed another restore. iTunes says the the iPad has been restored and will restart automatically and appear in iTunes when it is ready. That was 30 minutes ago. iPad still won't start. I am looking down the barrel of yet another fruitless restore. What a crap product.

Try a reset:
Hold the Sleep and Home button down until you see the Apple logo.

My laptop crashes and switches off when I sync with my ipad 3. Can anyone help me resolve?

My laptop crashes and switches off when I sync my IPAD 3. Can anyone help me resolve please?

Is that a Windows laptop?
If so, in the course of your troubleshooting to date, have you worked through the following document?
iPhone, iPad, or iPod touch: Windows displays a blue screen message or restarts when connecting your device

[SOLVED] KDE switches activities when opening a new File

First off, I've been using KDE Plasma Workspaces for a few months now, and for the most part am largely satisfied. Thanks to both the developers of KDE and to the contributors on Arch who made setting everything up a breeze.
One thing that does annoy me however is how it switches Activities when opening a new file, if the default application already has a running instance. For instance, say I have one Activity which I am using as a development environment and have Kate open to view source. Now I switch to a second Activity where I am working on editing style sheets for my web page and again wish to use Kate. If I open Dolphin and click on one of my style sheets (launching Kate as the default editor) I will be switched back to my first Activity and have the style sheet opened in the already running instance of Kate.
To me this behavior is not ideal, I would rather have the DE spawn a new instance of kate for that Activity. I've perused through some of the settings options but haven't seen anything obvious.
Last edited by brewlius_cesar (2013-08-14 10:29:32)

Thanks for the response schmidtbag, but these are both suggestions for opening a file in an existing instance of Kate, when I am looking to instead spawn a new instance (at least for the current Activity). Also, these suggestions are specific to Kate, where I would like this behavior to extend across KDE.
Maybe I am just making a big fuss over nothing, but for me it seems more appropriate to spawn a new instance of a program if I click on a file from a file browser, such as Dolphin. If I wanted to open a file in an already running instance of a program I would use Ctrl+O from that program, or drag the file over to the program as schmidtbag suggested.
I'm thinking about reposting over at kde.org, I'll be sure to follow up back over here, no matter what the outcome is.

Text getting cut off when printing to PDF from Excel

Hello,
     I've seen a lot related to this subject but nothing that shows a real solution.
     Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
     It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
     Any assistance is appreciated.
Thanks,
Kevin Murphy

please delete me from your mailing list. tks.
Date: Wed, 10 Feb 2010 11:20:28 -0700
From: [email protected]
To: [email protected]
Subject: Text getting cut off when printing to PDF from Excel
Hello,
     I've seen a lot related to this subject but nothing that shows a real solution.
     Using Excel 2003-sp3 and Adobe Acrobat v.9 Standard, the right half of the last character in the string gets cut off. It prints from excel fine.
     It's not always the text that is the right-most on the page either. An affected PDF file is attached - note the cut off "S" on the last line (NET ASSETS OF GOVERNMENTAL ACTIVITIES).
     Any assistance is appreciated.
Thanks,
Kevin Murphy
>

Extreme switches off when updating podcasts (too much data?) - the saga

Issue:
When refreshing podcasts the extreme can actually switch off, the status light on the extreme will switch off and it will not appear in the airport status menu. to recover I have to power cycle the extreme. There is no difference if I download only one podcast or allow for simultaneous downloads at a time. After about 1 or 2 times the extreme will just switch off.
Under this same configuration, my iTunes library has no issue playing back any of the content only podcast refreshing causes the Extreme to shutdown after the specified time.
Configuration:
Three disks connected to the airport extreme using an unpowered hub by technika. All three disks are powered through their own power supplies and are formatted in HFS+ Extended (Journaled)
You can find a youtube review of the hub here, http://www.youtube.com/watch?v=fihYOsQ1SQ8
iMac running Mac OS X 10.6.5 and all the latest updates. Disk Utility already run on the internal Macintosh HD and there are no errors to report.
Mac is connected wirelessly to the extreme's wifi network using 802.11a (I have yet to get it to connect using 802.11g.
Workarounds:
Despite the two other disks not being accessed by the mac, as a workaround I conducted two isolation steps.
I removed the other two disks from the hub while keeping the one disk with my iTunes Library connected through the hub, selected podcasts from the left hand side of iTunes and clicked refresh on the lower right corner of the iTunes window to get the latest podcasts to download.
-With the one disk connected to the hub, music playing back and podcasts downloading everything seems fine.
-I am now wondering if it's the hub or a limitation of the extreme or if it's because I am connected using 802.11a.
-Although I didn't finish downloading all the podcasts, I paused all intentionally and switched my mac to 802.11g successfully by changing the radio mode on the extreme to 802.11n only (5GHz) - 802.11b/g
-relaunched iTunes
-refreshed podcasts again
-The podcasts all stopped due to an error (sorry for not noting it)
-connected to hard drive directly to the extreme and restarted the extreme for good measure
-airport extreme not visible by mac wirelessly, reset extreme by pressing the button on back of extreme, which didn't do anything for some reason, power-cycled extreme.
-Launched iTunes and refreshed iTunes Library
-I noticed a few things, podcasts stop downloading due to err= -3150 or -3259
-more spinning beach balls in uTunes than usual (disk and network activity are the likely causes.)
-This setup seems flaky at best. Apple does not document this so I don't believe it's directly supported but it would be nice but I can see a lot of caveats beyond what I described.
I don't know if this helps anyone who is trying to do the same but I would say this should be avoided as I don't think the firmware on the extreme can support this, iTunes 10.1 doesn't seem to work well with this setup as there are errors when downloading and it gets a bit sluggish with iTunes experiencing so many disk and network activity issues (beach balls)
Moral of the story, I will go back to connecting my iTunes library disk directly to my mac unless someone has some clever solution or suggestion.
Here are the setting as per Airport Utility in Manual Setup
Airport Icon>Summary
Version 7.4.2
Wireless Mode: Create a Wireless Network
Wireless Security: WPA2 Personal
Internet Icon>Internet Connection
Connection Sharing: Off (Bridge Mode)
Disks Icon>Disks
3 hard drives connected.
Tried with iTunes Library Disk alone connected through the USB hub and directly into the Airport Extreme in an effort to isolate the issue.
Disk Icon>File Sharing
Enable File Sharing - on
Secure Shared Disks: With Airport Extreme password
Airport Disk Guest Access: Not allowed

Hi... mine crashes too, but it has to do with erasing a large amount of files.
I got my airport extreme the other day, very excited to be able to plug my 500 gb drive into it so my wife and I can back up our machines using wireless (time machine). I had already had a years worth of backup on the hard drive, and didn't realize that over the base station the way its backed up is different from when the HD is just hooked directly to the computer.
So, well... took forever to do a fresh back up, and then I went to erase my old time machine folder on my drive and every time I would request the delete over the network... crash the airport. I tried several more times, incl just doing a little folder. I ended up having to plug the drive directly into my machine and erasing it that way (over 700,000 files... so, not sure the Airport is designed to handle all that).
This might explain why the time machine works differently over Airport (and Time Capsule?) as the hardware that Apple uses just isn't up to handling large files. Over Airport it creates a disk image which it writes to, somehow, rather than directly writing a large amount of files to the drive. Seems like a work engineering work around to me, otherwise why change the method?
Cheers.

Iphone 3gs ios 6.0.1 keeps switching off when trying to use cellular data

Hi everybody
bought an used iphone 3gs a few days ago, the guy gave it updated to ios 6.0.1. I noticed as i put the phone on cellular data it switches off. and when turned on it comes till the unloack screen, and as i try to unlock it switches off again.
Read a few threads and removed sim put the charger on and started and it starts and works like an ipod with no issues. After a while if i put the sim card and if its on charge it will work perfect with no problems.
As i remove it from charge works until the battery level comes to approx 60 % and then turns off.
Then i must again put it on charge , not because the battery is low but to start the phone.
i have no idea whats goig on, first t ime apple usr and such horrible experience, any ideas?
P.S - read many threads saying toggling on /off for cellular data. I cant do it without sim as i am on 6.0.1 .
Please help phones really not doing what its supposed to. just switches off anywhere in meetings or on the go when i need to make calls.
Thanks

wyattrv wrote:
Thanks Keith
3g now working, didn't need the info after Password no filed on my settings for them. Don't suppose you know thw MMS settings do you?
cheers
rich
On my phone it says BT GPRS MMS settings are
btmobile.bt.com
username bt
password bt
proxy not set
port not set
server not set
MMMSC http://mms.bt.com/servelets/mms
MMS proxy 212.183.137.12
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Iphone still switching off when I'm restoring it!

I've got a 3GS 16g and when down loading a new app the other day (after only getting it for Christmas) it crashed and then went into recovery mode. I've hooked it up to my computer and when i try to restore it, the phone seams to reboot or switch off mid sinc. At the end of the download my computer says that it lost network connection and to try the download again after having checked all my settings. I've done this about 20 times now and it still doesn't work. Does anyone have any ideas please? I'm trying to aviod taking it back to the shop as they'll send it off!
(I did have a reply and thought I had the solution but have just realised that I have Windows XP Professional!)

You're welcome.
Are you saying your OS detail provided is accurate? You have a PC running Windows 2000?
If so, Windows 2000 is not supported. You need Windows XP or Vista with a PC, which is included on the retail sales box.

Mac Book Pro switches off when you open Safari!

Hi people.
I am new Mac Book Pro user, have had it for a few months now and all is good, however I have an issue and that is that everytime I open safari and open a new tab the machine switches off! To turn it back on I need to wait for 30 seconds or so and then power it on. An error report is shown upon login and it happens again when safari opens.
Any ideas??

Take it to an Apple store or AASP.

Iphone switches off when I'm restoring it!

I've got a 3GS 16g and when down loading a new app the other day (after only getting it for Christmas) it crashed and then went into recovery mode. I've hooked it up to my computer and when i try to restore it, the phone seams to reboot or switch off mid sinc. At the end of the download my computer says that it lost network connection and to try the download again after having checked all my settings. I've done this about 20 times now and it still doesn't work. Does anyone have any ideas please? I'm trying to aviod taking it back to the shop as they'll send it off!

You're welcome.
Are you saying your OS detail provided is accurate? You have a PC running Windows 2000?
If so, Windows 2000 is not supported. You need Windows XP or Vista with a PC, which is included on the retail sales box.

Highlighted Fields in forms to be switched off when opening a pdf form

Similar Messages

Maybe you are looking for