Highlighted of the start and the end of html tag

[En] : Hello all and all,
I wonder if it is possible to display the start and end of a html tag highlighting (or with a different background) when it is selected.
thx
Sorry for my english.
[Fr] Bonjour a toutes et a tous,
J'aimerais savoir si il est possible d'afficher le début et la fin d'une balise html en surbrillance (ou avec un fond différent) lorsque celui ci est selectionné .
Merci

En Anglais: In Code view, Select Parent Tag. See screenshot below.
En Français: En mode Code, Sélectionner balise parente. Voir capture d'écran ci-dessous.
Nancy O.

Similar Messages

How PO validity start and validity end works

In the PO Header (tab Additional data), there are fields: validity start and validity end. The help text states the following:
Start of validity period
Date as of which services can be performed or materials delivered.
In the case of purchase orders:
Start of the period in which the service is to be performed or thematerial delivered.
End of validity period
Date up to which services can be performed or materials delivered.
In the case of POs:
End of the period in which the service is to be performed or thematerial delivered.
I maintained a validity date range 01/01/2007 to 01/10/2007. When i tried to receive the item with posting date 01/15/2007, the system saved the GR without even a warning message that the GR was outside the PO validity date.
How does this field work? Is this standard configuration or does this only work with a user-exit?
I would appreciate any input.
Regards,
Dominique

hi ,
use transaction OMCQ,
set the status of message for M7 163 to error. if this message is not present in the list , then go to new entries and select this message and enter it into the list
after this set the status to "E".
let me know if this works
Regards
Mangesh.

Validity start and Validity End date in PO

HI gurus
can you plz tell me how to activate validity start and Validity End date in PO
Neha

Hi,
It is applicable for PO done for Frame work oder with Doc type - FO(Frame work order)as its an agreement of supply of stock only between specified period.For this kind of Doc type system makes it mandatory to enter the valisity start and end date.
Thanks

Shipment completion check is erasing load start and load end dates & times

Once the load start, load end is clicked during the pack process, the system reads this just fine. Once ship complete happens, the system is erasing the load start load end.
We are capturing the difference between Load end and Load start as Packing time in a custom report. Similarly the difference between Shipment end and Shipment start as Loading time. But we post goods issue the delivery by ship complete button the dates and times are gone. Any idea of how and where I can configure this not to disappear even after the ship complete. Thank you.

Have you checked the table VTTK with different fields before completing PGI? In other words you are wiping out the loading start and loading end details some how. You should have a value in your VTTk value before PGI. Check that.
Regards,

Add Validity Start and Validity End On PO Header

Dear SAP,
need your help, I am trying to add Validity Start and Validity End Field on Additional Tab in Purchase Order header.
How do i add this field ?
i already check on MM define screen layout a document level, but there is not setting for this two field.

Hi Nizam,
The validity start date & end date are used only for service orders. In configuration goto IMG>MM>Purchasing>PO>Define screen layout at document level and check into Administrative data, header of ME21N , the field selection key attached to your document type (Say NBF) and for field selection key AKTH.
The fields Start of validity period & Validity period end of field selection key ME21N, NBF & AKTH should be set as optional then only required fields will be visible on screen.

Send email notification in latest start and latest end

Hi all,
My requirement is to send email notification on latest start and latest end. For latest start, a notification needs to be sent to the manager asking him to start processing the Leave request.
Am not too concerned about the latest end, since the latest end takes the workitem(MODELED ACtion) to the next manager, where I can insert a email step in the workflow.
My concern is how can i send an email to the manager if he has not started processing the lave request within say 3 days
thanks a ton.
regards

Hi,
If you are looking to send notification ASA work item reaches a latest end then follow the below steps.
1. Open the step for which you have set the latest end and click latest end tab.
2. Under the same tab you will find a Drop down box you will find two entries 1 Display Text 2 Modeled choose the 1 option. and define the text in the task description by choosing Latest End description.
3. Choose the container element you might have populated the email address.
Now the configuration that you need to make sure to send a mail to external email id is SCOT settings if SMTP node is configured then this node would be sending mails to the
Regards
Pavan

Can I turn off CSS in DW CS4 and use good ole HTML tags?

Can I turn off CSS in DW4 and use good ole HTML tags?
I can in DW CS3 but can't see how to in CS4.
Thanks.

Having just been though a similar issue as described in another thread, I thought you might find this useful:
http://forums.adobe.com/thread/522805?tstart=0

[svn:fx-trunk] 11664: Update ASDoc comments on new MXItemRenderer classes, and fix a broken HTML tag in Range.as

Revision: 11664
Author:   [email protected]
Date:     2009-11-11 11:42:00 -0800 (Wed, 11 Nov 2009)
Log Message:
Update ASDoc comments on new MXItemRenderer classes, and fix a broken HTML tag in Range.as
QE notes: -
Doc notes: -
Bugs: -
Reviewer: -
Tests run: - Checkintests
Is noteworthy for integration: No
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/mx/controls/dataGridClasses/MXDataGridItemRe nderer.as
    flex/sdk/trunk/frameworks/projects/spark/src/mx/controls/listClasses/MXItemRenderer.as
    flex/sdk/trunk/frameworks/projects/spark/src/mx/controls/treeClasses/MXTreeItemRenderer.a s
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/Range.as

Revision: 11664
Author:   [email protected]
Date:     2009-11-11 11:42:00 -0800 (Wed, 11 Nov 2009)
Log Message:
Update ASDoc comments on new MXItemRenderer classes, and fix a broken HTML tag in Range.as
QE notes: -
Doc notes: -
Bugs: -
Reviewer: -
Tests run: - Checkintests
Is noteworthy for integration: No
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/mx/controls/dataGridClasses/MXDataGridItemRe nderer.as
    flex/sdk/trunk/frameworks/projects/spark/src/mx/controls/listClasses/MXItemRenderer.as
    flex/sdk/trunk/frameworks/projects/spark/src/mx/controls/treeClasses/MXTreeItemRenderer.a s
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/Range.as

How to set a default start and/or end date for New Events based on trigger date.

I'm using the CalendarActivityListener to get current row when clicking on an existing event. As per previous posts this listener gives you access to event detail including Start Date, End Date, etc.
However, what I want to do is to default the start (and end) dates for New Events based on the trigger date.
I've tried the CalendarListener and can grab the Trigger Date from it - however, I can't see a way to pass this directly to the popup/dialog I'm using to create the new event.
At present I'm putting the TriggerDate into the ADFContext session scope e.g. ADFContext.getCurrent().getSessionScope().put("TriggerDate",calendarEvent.getTriggerDate());
Then, I've tried multiple approaches to try and "get" the TriggerDate from session scope to drop it into my new Calendar Event basically, I'm trying to default the InputField(s) associated with the Start Date using the value from the session - I've tried
1. setting the default value for the InputField in the jspx using a binding expression i.e. value="#{sessionScope.TriggerDate}" - this actually sets the value appropriately when the jspx is rendered but, when I go to create I get a NPE and I can't debug. I assumed that it might be a Date type issue - it would appear that CalendarListener provides a date of type java.util.Date and that the StartDate attribute of my VO/EO/table is a DATE and therefore requires oracle.jbo.domain.Date so I tried casting it - to no effect
2. Using a Groovy expression *(StartDate==null?adf.context.sessionScope.TriggerDate:StartDate)* in my calendar's EventVO to default the Start Date to the same result
Any thoughts or ideas?

John,
Thanks for that suggestion - could not get it to work. However, I did manage a different approach. I finally determined the sequence of events in terms of how the various events and listeners fire (I think).
Basically, the CalendarActivityListener fires, followed by the listener associated with the Calendar object's Create facet, followed finally by the CalendarEventListener - the final is where the TriggerEvent is available and then finally, control is passed to the popup/dialog in the Create facet. So, my approach of trying to set/get the TriggerDate in the user's HTTP session was doomed to failure because it was being get before it had been set :(
Anyway, I ended up adding a bit of code to the CalendarEvent listener - it grabs the current BindingContext, navigates through the DCBindingContainer to derive an Iterator for the ViewObject which drives the calendar and then grabs the currently active row. I then do a few tests to make sure we're working with a "new" row because I don't want to alter start & end dates associated with an existing calendar entry and then I define the Start and End dates to be the Trigger Date.
Works just fine. Snippet from the listener follows
BindingContext bindingContext = BindingContext.getCurrent();+
*if ( bindingContext != null ) {*+
DCBindingContainer dcBindings = (DCBindingContainer) bindingContext.getCurrentBindingsEntry();+
DCIteratorBinding iterator = dcBindings.findIteratorBinding("EventsView1Iterator");+
Row currentRow = iterator.getCurrentRow();+
if ( currentRow.getAttribute("StartDate") == null)+
currentRow.setAttribute("StartDate", calendarEvent.getTriggerDate());+
if (currentRow.getAttribute("EndDate")==null)+
currentRow.setAttribute("EndDate", calendarEvent.getTriggerDate());+
*}*

Video start and media end time stamps get lost

Premiere Pro CS4 is not keeping the tape's media start and end times as well as the Video In and Out Points.
It never was a problem with earlier versions but this began the on the very first use of CS4.
I use these time stamps to keep track of the chronilogical order of the clips.
Anyone ever had this problem.
Thanks

This problem occurs after mini DV tapes have been loaded in. It has happened with both my older panasonic AG-DVC30 and my newer AG DVX100.
It is really annoying because I count on using those time stamps to coordinate the addition to the clips into the editor.
It seems that I've lost some of the time stamps after they have all been loaded in. Like when I start up Premiere Pro CS4 a second time on the, the next day, I find even more of the time stamps missing, over in the project pane. I probably should carefully document that to be sure. Could be significant in the troubleshooting process.

Detect "touch start" and "touch end" event in windows phone default browser.

Hi,
We have a BIG problem, because in all browsers we can detect the "touch start" event and "touch end" event. For iOS, firefox, internet Explorer, safari, Android work well. But in the windows phone default browser the "touch end"
doesn't work.
Do you know what we can do ?
Thanks.

Hi gogogate,
>>But in the windows phone default browser the "touch end" doesn't work
There is no simply way to achieve this, in my experience, I would recommend that you can handle touch event using JavaScript and retrieve information you need form the webpage using the window.external.notify(string) function:
https://msdn.microsoft.com/library/windows/apps/br227713
#How to receive information from the WebView
http://blogs.msdn.com/b/wsdevsol/archive/2012/10/18/nine-things-you-need-to-know-about-webview.aspx#AN5
About how to handle touch event using JS, please refer to this article:
http://blogs.windows.com/buildingapps/2012/11/15/adapting-your-webkit-optimized-site-for-internet-explorer-10/#step4
You also need to inject javascript into the WebView page, please read this article:
http://blogs.msdn.com/b/wsdevsol/archive/2012/10/18/nine-things-you-need-to-know-about-webview.aspx#AN6
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Capture Latest start and latest end - date and time through PI category.

Hi Guys,
I want to capture latest start and latest date and time of each of the individual phases through PI categories. i.e these values should flow from process order.What characteristic do i have to include? I know PPPI_EVENT_DATE and time will not work for this.

Thanks for your response Avinash.
Btw, I have viewed all these notes 368289.1, 603233.1, 399056.1, 329692.1, 1146414.1 already, but these don't seem to solve my problem because in each of these are under assumption that the initial Joining Date of the employee (i.e. Effective Start Date and Latest Start Date) is entered correctly without an issue, and these notes talk about dealing with 'Updating or Correcting' the data.
But In my case the pre-conditions are different, although those are making the system to respond in the same way (i.e. showing same error) some how.
As far as deleting the employees is concerned, yes that could be one option, but I am not really sure about adapting this solution as the dates I used in my case were just example dates, and in actual these employees are created almost 1 month back and they are already used in Projects module, CRM module and others.

Square at the end of all tags

hey... i am using id3v2.4 UTF-8 for tagging my mp3. When i import them to itunes all the names have square at the end. what is the problem? can i solve this by not changing the tag version? other programs seem to read the tag properly.

Please read this thread http://discussions.apple.com/thread.jspa?messageID=3302592#3302592
PC Windows XP Pro

[RB 6i] Format text in the field using HTML-tags. Or another way...

If some fields of tables in database contain html tags such as 'H<sub>2</sub>O' (here is html tag 'sub') or 'some<b>text</b>'(here is html tag 'b') how can I to make Report Builder 6i to understand these tags or at least don't show them?
Or how in another way can I format a part of text inside the field?
thanx before
Max

Hi Maxim,
If the output is PDF, the only way is to filter the incoming values yourself. You will need to create a PL/SQL column and remove the HTML markup tags. This, of course, leaves you without attributes you wanted in text (ie: the no "Bold" characters). You can still do this in with the same report basing the output from the PL/SQl formula column on the "desformat" input parameter.
Reports doesn't have any "markup" capability. ie: A field only has one font & one colour. You can have multiple fonts for boilerplate text but, again, only a single colour.
Robin.

Help needed in formating the text using HTML tags in reports 10g

Hi all,
I have a situation here. We have an application which prints out Reports with a few lines of text in it. This text is entered by the user through our forms application in a field. That particular text is stored in each row of a particular long column. Here I want to modify the text, while printing, on the report like underline, bold, italics etc,.
As of now I am using the HTML tags, in the forms, to do so as most the times the text in the report is same.
I want to know if this can be done by the user itself while he is entering the data in the field through the form.
Thanks in advance . I will explain you more clearly if you need.

Hi,
The code did work. But I am not sucessfully able to display the values entered in 2nd page in the 3rd page.Please find the code below:
<html>
<head>
<script language="LiveScript">
function WinOpen() {
if (document.form1.cap.value == "")
alert("Enter value in text box");
return;
msg=open("","DisplayWindow","toolbar=no,directories=no,menubar=no, scrollbars=yes");
msg.document.write("<HTML><HEAD><TITLE>Yo!</TITLE></HEAD>");
msg.document.write("<CENTER><h1><B>This is really cool!</B></h1></CENTER>");
msg.document.write('<BODY><form name="form2">');
for(var i =0; i < document.form1.cap.value; i++)
msg.document.write("<INPUT type=text name=tbAlphaNumeric>");
msg.document.write("<br>");
msg.document.write('<input type="button" name="Button2" value="Steal" onClick="javascript:window.opener.WinShow();">');
msg.document.write('</form></BODY></HTML>');
function WinShow() {
msg=open("","DisplayWindow","toolbar=no,directories=no,menubar=no, scrollbars=yes");
msg.document.write("<HTML><HEAD><TITLE>Great!</TITLE></HEAD>");
msg.document.write("<CENTER><h1><B>Display of second page text elements!</B></h1></CENTER>");
msg.document.write('<BODY><form name="form3">');
for(var j =0; j < document.form1.cap.value; j++)
msg.document.write(document.form2.tbAlphaNumeric[j].value);
msg.document.write("<br>");
msg.document.write('</form></BODY></HTML>');
</script>
</head>
<body>
<form name="form1">
<INPUT type= "text" name=cap>
<input type="button" name="Button1" value="Push me" onClick="WinOpen()">
</form>
</body>
</html>

Highlighted of the start and the end of html tag

Similar Messages

Maybe you are looking for