Highlighted text in Normal report.

Hi,
My client requirements is that one report has to display in higlighted text for every alternative line items. This is a normal classical report, In alv we can achive this. But in normal report how it can be possilbe. Please suggest me on this..
Thanks in Advance.
Regards,
Ramana

Hi
Use the following code
FORMAT COLOR COL_KEY INTENSIFIED OFF.
WRITE: 'Hello World'.
FORMAT COLOR OFF.
Hopefully, it will help you.
Thanks & Regards,
Ibrar

Similar Messages

Illustrator CS 6 won't paste into a text box/paragraph of text, instead pastes a new line of text in the upper left corner of my document. How can I get it to paste into the selected paragraph or highlighted text like normal?

I've done it a million times, I copy a selection of type...I select the type that I want to replace it with, and then I paste. Now, Illustrator will only paste the text as a "point text" (a single line) somewhere else on the artboard—it seems to always be the upper left corner of the art board.

peg,
In cases of sudden appearance of strangenesses, the list may be relevant, hopefully the easy part at the top.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Text in bold in normal report

hi to all,
plz help me in this issue
how can we make text heading bold in the normal report
thanks in advance
kiran kumar.

hi,
If you are using WRITE statements, use
FORMAT INTENSIFIED ON.
WRITE : / 'welcome'.
FORMAT INTENSIFIED OFF.
rgds
Anver

Highlighting text in a table cell

Im trying to get text in a table have it background shaded a different colour to the rest of the table cell but it doesnt work. No exceptions are thrown does anyone have any idea.
public Component getTableCellRendererComponent(JTable table,
        Object value,
        boolean isSelected,
        boolean hasFocus,
        int row,
        int column)
        setFont(table.getFont());
        this.setText(value));
        this.selectAll();
        this.setSelectionColor(new Color(0,0,255,100);
        return this;
    }

The answer is similar to what someone else asked recently for highlighting text in a JFormattedTextField cell.
class MyFocusListener extends FocusAdapter
public void focusGained(FocusEvent e)
SwingUtilities.invokeLater(new Runnable()
public void run()
selectAll();
Put that in your cell editor or its base class. You can change the color or whatever you want. I think the problem is a timing thing where normal focus processing is interrupting your changes. So give the focus processing time to run with this Runnable triggering your processing to occur on the Awt thread (as is proper) after the system is doing whatever it wants to do. Let us know if it works for you.

Can i use classes or grid control (alv) in normal report

Hai,
Can i use Grid control or classes in normal report.If yes what are the steps that i have to go for.
thanks
kiran

Sure... here is a sample of an ALV in a report. All you need to do is call a screen. I believe that there is also a way to do it without having to create a screen.
REPORT ZRICH_0001.
DATA: BEGIN OF I_ALV OCCURS 0,
      MATNR TYPE MARA-MATNR,
      MAKTX TYPE MAKT-MAKTX,
      END OF I_ALV.
DATA: ALV_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
DATA: ALV_GRID       TYPE REF TO CL_GUI_ALV_GRID.
DATA: LAYOUT    TYPE LVC_S_LAYO.
DATA: FIELDCAT TYPE LVC_T_FCAT.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001 .
SELECT-OPTIONS: S_MATNR FOR i_ALV-MATNR.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
PERFORM GET_DATA.
CALL SCREEN 100.
*      Module status_0100 OUTPUT
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS '0100'.
SET TITLEBAR '0100'.
DATA: VARIANT TYPE DISVARIANT.
VARIANT-REPORT = SY-REPID.
VARIANT-USERNAME = SY-UNAME.
* Create Controls
CREATE OBJECT ALV_CONTAINER
         EXPORTING
               CONTAINER_NAME    = 'ALV_CONTAINER'.
CREATE OBJECT ALV_GRID
         EXPORTING
               I_PARENT          = ALV_CONTAINER.
* ALV Specific. Data selection.
* Populate Field Catalog
PERFORM GET_FIELDCATALOG.
CALL METHOD ALV_GRID->SET_TABLE_FOR_FIRST_DISPLAY
      EXPORTING
           IS_LAYOUT              = LAYOUT
           IS_VARIANT             = VARIANT
           I_SAVE                 = 'U'
           I_STRUCTURE_NAME       = 'I_ALV'
      CHANGING
           IT_OUTTAB       = I_ALV[]
           IT_FIELDCATALOG = FIELDCAT[].
ENDMODULE.
*      Module USER_COMMAND_0100 INPUT
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
    WHEN 'BACK' OR 'CANC'.
      IF NOT ALV_CONTAINER IS INITIAL.
        CALL METHOD ALV_CONTAINER->FREE.
        CLEAR: ALV_CONTAINER.
        FREE : ALV_CONTAINER.
      ENDIF.
      IF SY-SUBRC = 0.
        SET SCREEN 0.
        LEAVE SCREEN.
      ELSE.
        LEAVE PROGRAM.
      ENDIF.
    WHEN 'EXIT'.
      IF NOT ALV_CONTAINER IS INITIAL.
        CALL METHOD ALV_CONTAINER->FREE.
        CLEAR: ALV_CONTAINER.
        FREE : ALV_CONTAINER.
      ENDIF.
      LEAVE PROGRAM.
ENDCASE.
ENDMODULE.
* FORM GET_DATA
FORM GET_DATA.
SELECT * INTO CORRESPONDING FIELDS OF TABLE I_ALV
        FROM MARA
          INNER JOIN MAKT
            ON MARA~MATNR = MAKT~MATNR
               WHERE MARA~MATNR IN S_MATNR
                 AND MAKT~SPRAS = SY-LANGU.
SORT I_ALV ASCENDING BY MATNR.
ENDFORM.
*      Form Get_Fieldcatalog - Set Up Columns/Headers
FORM GET_FIELDCATALOG.
DATA: LS_FCAT TYPE LVC_S_FCAT.
REFRESH: FIELDCAT.
CLEAR: LS_FCAT.
LS_FCAT-REPTEXT    = 'Material Number'.
LS_FCAT-COLTEXT    = 'Material Number'.
LS_FCAT-FIELDNAME = 'MATNR'.
LS_FCAT-REF_TABLE = 'I_ALV'.
LS_FCAT-OUTPUTLEN = '18'.
LS_FCAT-COL_POS    = 1.
APPEND LS_FCAT TO FIELDCAT.
CLEAR: LS_FCAT.
LS_FCAT-REPTEXT    = 'Material Description'.
LS_FCAT-COLTEXT    = 'Material Description'.
LS_FCAT-FIELDNAME = 'MAKTX'.
LS_FCAT-REF_TABLE = 'I_ALV'.
LS_FCAT-OUTPUTLEN = '40'.
LS_FCAT-COL_POS    = 2.
APPEND LS_FCAT TO FIELDCAT.
ENDFORM.
Regards,
Rich Heilman

I have a normal report , i need to make it into ALV,

Hi,
i have a normal report and i need to make it into ALV Report in ECC5.0version. when i making it into ALV its giving blank.
can any one help me out to make below code in to ALV report.
REPORT ZSAMPLE line-size 260
                  line-count 65
                  no standard page heading.
====================================================================
TABLES *********************************
====================================================================
tables : bseg,
         bkpf,
         kna1,
         bsid,
         bsad,
         knb1.
data : begin of customer_tab occurs 0,
          kunnr         like kna1-kunnr,
          name1         like kna1-name1,
          flag(1)       type c,
       end of customer_tab.
data : begin of customerdoc_tab occurs 0,
          kunnr         like kna1-kunnr,
          belnr         like bkpf-belnr,
          gjahr         like bkpf-gjahr,
          monat         like bkpf-monat,
       end of customerdoc_tab.
data : begin of doc_tab occurs 0,
          belnr         like bkpf-belnr,
          gjahr         like bkpf-gjahr,
          monat         like bkpf-monat,
       end of doc_tab.
DATA: BEGIN OF BSID_TAB OCCURS 0,
         BUKRS LIKE BSID-BUKRS,
         PRCTR LIKE BSID-PRCTR,
         KUNNR LIKE BSID-KUNNR,
         FLAG(1),
         UMSKZ LIKE BSID-UMSKZ,
         BLART LIKE BSID-BLART,
         BELNR LIKE BSID-BELNR,
         BUZEI LIKE BSID-BUZEI,
         NETDT LIKE BSID-ZFBDT,
         ZFBDT LIKE BSID-ZFBDT,
         BUDAT LIKE BSID-BUDAT,
         BLDAT LIKE BSID-BLDAT,
         BSCHL LIKE BSID-BSCHL,
         DMBTR LIKE BSID-DMBTR,
         SHKZG LIKE BSID-SHKZG,
         ZBD1T LIKE BSID-ZBD1T,
         ZBD2T LIKE BSID-ZBD2T,
         ZBD3T LIKE BSID-ZBD3T,
         REBZG LIKE BSID-REBZG,
         REBZT LIKE BSID-REBZT,
         KOART LIKE BSEG-KOART,
         SK1DT LIKE FAEDE-SK1DT,
         SK2DT LIKE FAEDE-SK2DT,
         DAYSD LIKE SY-TABIX,
      END OF BSID_TAB.
ranges : r_bukrs for bsid-bukrs,
         r_kunnr for kna1-kunnr.
===================================================================
VARIABLES *******************************
===================================================================
data : v_belnr     like bseg-belnr,
       v_gjahr     like bkpf-gjahr,
       v_monat     like bkpf-monat,
       v_ttlc      type p,
       v_flag(1)   type c,
       V_COUNT1(4) TYPE N,
       V_COUNT2(4) TYPE N,
       V_COUNT3(4) TYPE N,
       V_COUNT4(4) TYPE N,
       V_COUNT5(4) TYPE N,
       V_COUNT6(4) TYPE N,
       V_COUNT7(4) TYPE N,
       V_COUNT8(4) TYPE N,
       V_COUNT9(4) TYPE N,
       V_COUNT10(4) TYPE N,
       V_NET1      LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 1
       V_NET2      LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 2
       V_NET3      LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 3
       V_NET4      LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 4
       V_NET5      LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 5
       V_NET6      LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 6
       V_NET7      LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 7
       V_NET8      LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 8
       V_NET9      LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 9
       V_NET10      LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 10
       V_NET11      LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 11
       V_NET       LIKE BSID-DMBTR, "Total Balance of Customer
       V_ttlNET1   LIKE BSID-DMBTR,
       V_ttlNET2   LIKE BSID-DMBTR,
       V_ttlNET3   LIKE BSID-DMBTR,
       V_ttlNET4   LIKE BSID-DMBTR,
       V_ttlNET5   LIKE BSID-DMBTR,
       V_ttlNET6   LIKE BSID-DMBTR,
       V_ttlNET7   LIKE BSID-DMBTR,
       V_ttlNET8   LIKE BSID-DMBTR,
       V_ttlNET9   LIKE BSID-DMBTR,
       V_ttlNET10   LIKE BSID-DMBTR,
       V_ttlNET11   LIKE BSID-DMBTR,
       V_ttlNET    LIKE BSID-DMBTR,
       v_kunnr     like bseg-kunnr,
       V_BUTXT     like t001-butxt.
===================================================================
SELECTION SCREEN ****************************
===================================================================
selection-screen begin of block b1 with frame title text-001.
parameters :     p_bukrs    like bseg-bukrs obligatory.
select-options : s_kunnr    for kna1-kunnr,
                 s_BRSCH    for kna1-BRSCH,
                 s_REGIO    for kna1-REGIO,
                 s_KTOKD    for kna1-KTOKD,
                 s_BUSAB    for knb1-BUSAB.
selection-screen: end of block b1.
selection-screen begin of block b2 with frame title text-003.
PARAMETERS: DAT LIKE SY-DATUM DEFAULT SY-DATUM.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(30) TEXT-002.
SELECTION-SCREEN POSITION POS_LOW.
*PARAMETERS: RASTBIS1 LIKE RFPDO1-ALLGROGR DEFAULT '000'.
*PARAMETERS: RASTBIS2 LIKE RFPDO1-ALLGROGR DEFAULT '030'.
*PARAMETERS: RASTBIS3 LIKE RFPDO1-ALLGROGR DEFAULT '060'.
*PARAMETERS: RASTBIS4 LIKE RFPDO1-ALLGROGR DEFAULT '090'.
*PARAMETERS: RASTBIS5 LIKE RFPDO1-ALLGROGR DEFAULT '120'.
PARAMETERS: RASTBIS1(4) type n DEFAULT '0000'.
PARAMETERS: RASTBIS2(4) type n DEFAULT '0030'.
PARAMETERS: RASTBIS3(4) type n DEFAULT '0060'.
PARAMETERS: RASTBIS4(4) type n DEFAULT '0090'.
PARAMETERS: RASTBIS5(4) type n DEFAULT '0120'.
PARAMETERS: RASTBIS6(4) type n DEFAULT '0150'.
PARAMETERS: RASTBIS7(4) type n DEFAULT '0180'.
PARAMETERS: RASTBIS8(4) type n DEFAULT '0210'.
PARAMETERS: RASTBIS9(4) type n DEFAULT '0240'.
PARAMETERS: RASTBIS0(4) type n DEFAULT '0270'.
SELECTION-SCREEN END OF LINE.
Noted item removed as per FI instruction
PARAMETERS: P_STAND AS CHECKBOX default 'X',
           P_NOTED AS CHECKBOX ,
            P_SPCAL AS CHECKBOX .
selection-screen: end of block b2.
selection-screen begin of block b3 with frame.
PARAMETERS: allgline like RFPDO1-allgline .
Parameters : p_balyes type c radiobutton group grp9 default 'X',
             p_balno type c radiobutton group grp9.
selection-screen: end of block b3.
Check for the Select option
AT SELECTION-SCREEN.
IF P_STAND = '' AND P_SPCAL = '' .
MESSAGE E398(00) WITH 'PLEASE CHOOSE AT LEAST ONE G/L INDICATOR!'.
ENDIF.
Check for Company code Authorization
authority-check object 'F_BKPF_BUK'
     ID 'BUKRS' FIELD p_bukrs
     ID 'ACTVT' FIELD '03'.
if sy-subrc ne 0.
   message e398(00) with 'You are not Authorized for CC ' p_bukrs.
Endif.
===================================================================
START-OF-SELECTION ****************************
===================================================================
START-OF-SELECTION.
V_COUNT1 = RASTBIS1 + 1.
V_COUNT2 = RASTBIS2 + 1.
V_COUNT3 = RASTBIS3 + 1.
V_COUNT4 = RASTBIS4 + 1.
V_COUNT5 = RASTBIS5 + 1.
V_COUNT6 = RASTBIS6 + 1.
V_COUNT7 = RASTBIS7 + 1.
V_COUNT8 = RASTBIS8 + 1.
V_COUNT9 = RASTBIS9 + 1.
V_COUNT10 = RASTBIS0 + 1.
perform extract_data.
===================================================================
At line Selection *****************************
===================================================================
at line-selection.
if sy-lilli >= 9 .
   refresh r_bukrs.
   move p_bukrs to r_bukrs-low.
   move 'I' to r_bukrs-sign.
   move 'EQ' to r_bukrs-option.
   append r_bukrs.
   refresh r_kunnr.
   move customer_tab-kunnr to r_kunnr-low.
   move 'I' to r_kunnr-sign.
   move 'EQ' to r_kunnr-option.
   append r_kunnr.
   submit ZFARVR0040 and return
    with p_bukrs = p_bukrs
    with dat     = dat
    with p_stand = p_stand
    with p_spcal = P_SPCAL
    with s_kunnr in r_kunnr.
endif.
===================================================================
Top of Page *******************************
===================================================================
TOP-OF-PAGE.
SELECT SINGLE BUTXT FROM T001 INTO V_BUTXT
                      WHERE BUKRS = p_BUKRS .
WRITE:/73'Customers Aging Analysis',140'PAGE NO.',
SY-PAGNO.
WRITE:/002 'COMPANY',
         011 P_BUKRS,
         017 V_BUTXT,
         055 allgline centered,
         140 'DATE :',
         150 sy-datum .
write:/002 'User',
         011 sy-UNAME,
         140 'Time :',
         150 sy-UZEIT.
SKIP.
format color col_heading intensified off.
WRITE:/ SY-ULINE,
              SY-VLINE,002 'Customer',
          012 SY-VLINE,013 'Name',
          043 SY-VLINE,048 'CURRENT',
          061 SY-VLINE,065 'FROM ',V_COUNT1,
          079 SY-VLINE,083 'FROM ',V_COUNT2,
          097 SY-VLINE,101 'FROM ',V_COUNT3,
          115 SY-VLINE,119 'FROM ',V_COUNT4,
          133 SY-VLINE,137 'FROM ',V_COUNT5,
          151 SY-VLINE,155 'FROM ',V_COUNT6,
          169 SY-VLINE,173 'FROM ',V_COUNT7,
          187 SY-VLINE,191 'FROM ',V_COUNT8,
          205 SY-VLINE,209 'FROM ',V_COUNT9,
          223 SY-VLINE,228 'FROM ',V_COUNT10,
          243 SY-VLINE,248 'TOTAL',
          268 SY-VLINE.
WRITE:/      SY-VLINE,002 'Number',
           12 SY-VLINE,
           43 SY-VLINE,
           061 SY-VLINE,065 'TO    ',RASTBIS2,
           079 SY-VLINE,083 'TO    ',RASTBIS3,
           097 SY-VLINE,101 'TO    ',RASTBIS4,
           115 SY-VLINE,119 'TO    ',RASTBIS5,
           133 SY-VLINE,137 'FROM ',RASTBIS6,
           151 SY-VLINE,155 'FROM ',RASTBIS7,
           169 SY-VLINE,173 'FROM ',RASTBIS8,
           187 SY-VLINE,191 'FROM ',RASTBIS9,
           205 SY-VLINE,209 'FROM ',RASTBIS0,
           223 SY-VLINE,
           243 SY-VLINE,
           268 SY-VLINE,
           SY-ULINE.
format color off.
===================================================================
END-OF-SELECTION ***************************
===================================================================
end-of-selection.
===================================================================
Form : Extract_Data *
===================================================================
form extract_data.
Select the Customers
   Select t1~kunnr t2~name1
     into corresponding fields of table customer_tab
     from knb1 as t1 inner join kna1 as t2
          on t2~kunnr = t1~kunnr
               where t1~bukrs = p_bukrs
                 and t1~kunnr in s_kunnr
                 and t1~BUSAB in s_busab
                 and t2~regio in s_regio
                 and t2~BRSCH in s_BRSCH
                 and t2~KTOKD in s_KTOKD.
   if sy-subrc <> 0.
      message e398(00) with 'No Customers Selected'.
   endif.
   sort customer_tab.
   describe table customer_tab lines v_ttlc.
   v_ttlc = v_ttlc + 10.
   loop at customer_tab.
      v_net1 = 0.
      v_net2 = 0.
      v_net3 = 0.
      v_net4 = 0.
      v_net5 = 0.
      v_net6 = 0.
      v_net7 = 0.
      v_net8 = 0.
      v_net9 = 0.
      v_net10 = 0.
      v_net11 = 0.
      v_net = 0.
      perform calculate_ageing
                using
                  p_bukrs
                  customer_tab-kunnr
                  dat
                  RASTBIS1
                  RASTBIS2
                  RASTBIS3
                  RASTBIS4
                  RASTBIS5
                  RASTBIS6
                  RASTBIS7
                  RASTBIS8
                  RASTBIS9
                  RASTBIS0
                  P_STAND
                  ' ' "noted item
                  P_SPCAL
               changing
                  v_net1
                  v_net2
                  v_net3
                  v_net4
                  v_net5
                  v_net6
                  v_net7
                  v_net8
                  v_net9
                  v_net10
                  v_net11
                  v_net.
      if p_balyes = 'X' or v_net > 0.
        format color col_total.
        write:/ sy-vline,
                002 customer_tab-kunnr,
                012 SY-VLINE,013(30) customer_tab-name1,
                043 SY-VLINE,044(16) v_net1,
                061 SY-VLINE,062(16) v_net2,
                079 SY-VLINE,080(16) v_net3,
                097 SY-VLINE,098(16) v_net4,
                115 SY-VLINE,116(16) v_net5,
                133 SY-VLINE,134(16) v_net6,
                151 SY-VLINE,152(16) v_net7,
                169 SY-VLINE,170(16) v_net8,
                187 SY-VLINE,188(16) v_net9,
                205 SY-VLINE,206(16) v_net10,
                223 SY-VLINE,224(16) v_net11,
                239 SY-VLINE,240(16) v_net,
                258 SY-VLINE.
         format color off.
         hide : customer_tab-kunnr.
         v_ttlnet1 = v_ttlnet1 + v_net1.
         v_ttlnet2 = v_ttlnet2 + v_net2.
         v_ttlnet3 = v_ttlnet3 + v_net3.
         v_ttlnet4 = v_ttlnet4 + v_net4.
         v_ttlnet5 = v_ttlnet5 + v_net5.
         v_ttlnet6 = v_ttlnet6 + v_net6.
         v_ttlnet7 = v_ttlnet7 + v_net7.
         v_ttlnet8 = v_ttlnet8 + v_net8.
         v_ttlnet9 = v_ttlnet9 + v_net9.
         v_ttlnet10 = v_ttlnet10 + v_net10.
         v_ttlnet11 = v_ttlnet11 + v_net11.
         v_ttlnet = v_ttlnet + v_net.
      endif.
   endloop.
   ULINE.
       format color col_total.
       write:/ sy-vline,
                012 SY-VLINE,012(30) ' T O T A L',
                043 SY-VLINE,044(16) v_ttlnet1,
                061 SY-VLINE,062(16) v_ttlnet2,
                079 SY-VLINE,080(16) v_ttlnet3,
                097 SY-VLINE,098(16) v_ttlnet4,
                115 SY-VLINE,116(16) v_ttlnet5,
                133 SY-VLINE,134(16) v_ttlnet6,
                151 SY-VLINE,152(16) v_ttlnet7,
                169 SY-VLINE,170(16) v_ttlnet8,
                187 SY-VLINE,188(16) v_ttlnet9,
                205 SY-VLINE,206(16) v_ttlnet10,
                223 SY-VLINE,224(16) v_ttlnet11,
                239 SY-VLINE,240(16) v_ttlnet,
                258 SY-VLINE.
      format color off.
   ULINE.
endform.
Function to Calculate Aging.
Form calculate_ageing using
                        bukrs
                        kunnr
                        dat
                        RASTBIS1
                        RASTBIS2
                        RASTBIS3
                        RASTBIS4
                        RASTBIS5
                        RASTBIS6
                        RASTBIS7
                        RASTBIS8
                        RASTBIS9
                        RASTBIS0
                        P_STAND
                        P_NOTED
                        P_SPCAL
                      changing
                        v_net1
                        v_net2
                        v_net3
                        v_net4
                        v_net5
                        v_net6
                        v_net7
                        v_net8
                        v_net9
                        v_net10
                        v_net11
                        v_net.
DATA: BEGIN OF BSID_TAB1 OCCURS 0,
         BUKRS LIKE BSID-BUKRS,
         PRCTR LIKE BSID-PRCTR,
         KUNNR LIKE BSID-KUNNR,
         FLAG(1),
         UMSKZ LIKE BSID-UMSKZ,
         BLART LIKE BSID-BLART,
         BELNR LIKE BSID-BELNR,
         BUZEI LIKE BSID-BUZEI,
         NETDT LIKE BSID-ZFBDT,
         ZFBDT LIKE BSID-ZFBDT,
         BUDAT LIKE BSID-BUDAT,
         BLDAT LIKE BSID-BLDAT,
         BSCHL LIKE BSID-BSCHL,
         DMBTR LIKE BSID-DMBTR,
         SHKZG LIKE BSID-SHKZG,
         ZBD1T LIKE BSID-ZBD1T,
         ZBD2T LIKE BSID-ZBD2T,
         ZBD3T LIKE BSID-ZBD3T,
         REBZG LIKE BSID-REBZG,
         REBZT LIKE BSID-REBZT,
         KOART LIKE BSEG-KOART,
         SK1DT LIKE FAEDE-SK1DT,
         SK2DT LIKE FAEDE-SK2DT,
         DAYSD LIKE SY-TABIX,
      END OF BSID_TAB1.
RANGES: R_UMSKZ FOR BSID-UMSKZ.
Data : V_ZFBDT     Like bsid-ZFBDT,
       V_ZBD1T     Like bsid-ZBD1T,
       V_ZBD2T     Like bsid-ZBD2T,
       V_ZBD3T     Like bsid-ZBD3T,
       V_LINES(8) TYPE n.
IF P_NOTED = 'X'.     "CHECK NOTED ITEMS
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'D'.
APPEND R_UMSKZ.
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'L'.
APPEND R_UMSKZ.
ENDIF.
IF P_STAND = 'X'.    "CHECK STANDARD ITEMS
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = ' '.
APPEND R_UMSKZ.
ENDIF.
IF P_SPCAL = 'X'.    "CHECK SPECIAL G/L TRANSACTION
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'A'.
APPEND R_UMSKZ.
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'B'.
APPEND R_UMSKZ.
ENDIF.
SELECT * FROM BSID INTO CORRESPONDING FIELDS OF TABLE BSID_TAB
           WHERE BUKRS = BUKRS AND
                 budat <= dat AND
                 KUNNR = KUNNR AND
                 UMSKZ in R_UMSKZ.
SELECT * FROM BSAD appending CORRESPONDING FIELDS OF TABLE BSID_TAB
           WHERE BUKRS = BUKRS AND
                 budat <= dat AND
                 augdt >= dat AND
                 KUNNR = KUNNR AND
                 UMSKZ in R_UMSKZ.
DESCRIBE TABLE BSID_TAB LINES V_LINES.
LOOP AT BSID_TAB.
    if bsid_tab-BLART = 'DZ'.
      Select single ZFBDT ZBD1T ZBD2T ZBD3T
        into (V_ZFBDT,V_ZBD1T,V_ZBD2T,V_ZBD3T)
        from bsid where BUKRS = BUKRS
                    and kunnr = bsid_tab-kunnr
                    and BELNR = bsid_tab-REBZG.
      if sy-subrc = 0.
         bsid_tab-ZFBDT = V_ZFBDT.
         bsid_tab-ZBD1T = V_ZBD1T.
         bsid_tab-ZBD2T = V_ZBD2T.
         bsid_tab-ZBD3T = V_ZBD3T.
      else.
         Select single ZFBDT ZBD1T ZBD2T ZBD3T
           into (V_ZFBDT,V_ZBD1T,V_ZBD2T,V_ZBD3T)
           from bsad where BUKRS = BUKRS
                       and kunnr = bsid_tab-kunnr
                       and BELNR = bsid_tab-REBZG.
         if sy-subrc <> 0.
           bsid_tab-ZFBDT = V_ZFBDT.
           bsid_tab-ZBD1T = V_ZBD1T.
           bsid_tab-ZBD2T = V_ZBD2T.
           bsid_tab-ZBD3T = V_ZBD3T.
         endif.
      endif.
    endif.
    IF BSID_TAB-SHKZG = 'H'.
      BSID_TAB-DMBTR = BSID_TAB-DMBTR * ( - 1 ).
    ENDIF.
    bsid_tab-netdt = bsid_tab-ZFBDT.
bsid_tab-netdt = bsid_tab-budat.
    bsid_tab-koart = 'D'.
    MODIFY BSID_TAB.
   PERFORM CALC_DUE_DATE USING BSID_TAB.
    BSID_TAB-DAYSD = DAT - BSID_TAB-NETDT.
    IF BSID_TAB-DAYSD <= RASTBIS1.
      V_NET1 = V_NET1 + BSID_TAB-DMBTR.
    ELSEIF BSID_TAB-DAYSD <= RASTBIS2.
      V_NET2 = V_NET2 + BSID_TAB-DMBTR.
    ELSEIF BSID_TAB-DAYSD <= RASTBIS3.
      V_NET3 = V_NET3 + BSID_TAB-DMBTR.
    ELSEIF BSID_TAB-DAYSD <= RASTBIS4.
      V_NET4 = V_NET4 + BSID_TAB-DMBTR.
    ELSEIF BSID_TAB-DAYSD <= RASTBIS5.
      V_NET5 = V_NET5 + BSID_TAB-DMBTR.
    ELSEIF BSID_TAB-DAYSD <= RASTBIS6.
      V_NET6 = V_NET6 + BSID_TAB-DMBTR.
    ELSEIF BSID_TAB-DAYSD <= RASTBIS7.
      V_NET7 = V_NET7 + BSID_TAB-DMBTR.
    ELSEIF BSID_TAB-DAYSD <= RASTBIS5.
      V_NET8 = V_NET8 + BSID_TAB-DMBTR.
    ELSEIF BSID_TAB-DAYSD <= RASTBIS9.
      V_NET9 = V_NET9 + BSID_TAB-DMBTR.
    ELSEIF BSID_TAB-DAYSD <= RASTBIS0.
      V_NET10 = V_NET10 + BSID_TAB-DMBTR.
    ELSEIF BSID_TAB-DAYSD > RASTBIS0.
      V_NET11 = V_NET11 + BSID_TAB-DMBTR.
    ENDIF.
    V_NET = V_NET + BSID_TAB-DMBTR.
    MODIFY BSID_TAB.
ENDLOOP.
endform.
Calculate Due Date
FORM CALC_DUE_DATE USING P_BSID_TAB STRUCTURE BSID_TAB.
DATA : REFE TYPE P.
IF P_BSID_TAB-KOART = 'K' OR P_BSID_TAB-KOART = 'D'.
IF P_BSID_TAB-ZFBDT IS INITIAL.
    P_BSID_TAB-ZFBDT = P_BSID_TAB-BLDAT.
ENDIF.
*Nettofälligkeit bestimmen--
IF NOT P_BSID_TAB-ZBD3T IS INITIAL.
    REFE = P_BSID_TAB-ZBD3T.
ELSE.
    IF NOT P_BSID_TAB-ZBD2T IS INITIAL.
      REFE = P_BSID_TAB-ZBD2T.
    ELSE.
      REFE = P_BSID_TAB-ZBD1T.
    ENDIF.
ENDIF.
*Nichtrechnungsbezogene Gutschriften sind sofort fällig--
IF P_BSID_TAB-KOART = 'D' AND P_BSID_TAB-SHKZG = 'H'
OR P_BSID_TAB-KOART = 'K' AND P_BSID_TAB-SHKZG = 'S'.
    IF P_BSID_TAB-REBZG IS INITIAL.
      REFE = 0.
    ENDIF.
ENDIF.
P_BSID_TAB-NETDT = P_BSID_TAB-ZFBDT + REFE.
*Skontofälligkeiten bestimmen--
IF NOT P_BSID_TAB-ZBD2T IS INITIAL.
    P_BSID_TAB-SK2DT = P_BSID_TAB-ZFBDT + P_BSID_TAB-ZBD2T.
ELSE.
    P_BSID_TAB-SK2DT = P_BSID_TAB-NETDT.
ENDIF.
IF NOT P_BSID_TAB-ZBD1T IS INITIAL
OR NOT P_BSID_TAB-ZBD2T IS INITIAL.
    P_BSID_TAB-SK1DT = P_BSID_TAB-ZFBDT + P_BSID_TAB-ZBD1T.
ELSE.
    P_BSID_TAB-SK1DT = P_BSID_TAB-NETDT.
ENDIF.
*Nichtrechnungsbezogene Gutschriften sind sofort fällig--
IF P_BSID_TAB-KOART = 'D' AND P_BSID_TAB-SHKZG = 'H'
OR P_BSID_TAB-KOART = 'K' AND P_BSID_TAB-SHKZG = 'S'.
    IF P_BSID_TAB-REBZG IS INITIAL.
      P_BSID_TAB-SK2DT = P_BSID_TAB-NETDT.
      P_BSID_TAB-SK1DT = P_BSID_TAB-NETDT.
    ENDIF.
ENDIF.
ELSE.
   MESSAGE E122 RAISING ACCOUNT_TYPE_NOT_SUPPORTED.
ENDIF.
E_FAEDE = FAEDE.
ENDFORM.

Hi,
As vijay said...
1.Declare One final Internal table which you want to show the data
2 . populate the fieldcatalog using the FM or Manually using the itab in step1
3. Collect the Data into final internal table which you created in Step 1.
4. pass the fieldcat and Internal table to ALV FM.
chk out the prg below i have created your program but i donn knw wht are the output fields... chk your prg
*REPORT ZALVTEST .
REPORT ZSAMPLE line-size 260
line-count 65
no standard page heading.
TYPE-POOLS: SLIS.
====================================================================
TABLES *********************************
====================================================================
tables : bseg,
bkpf,
kna1,
bsid,
bsad,
knb1.
data : begin of customer_tab occurs 0,
kunnr like kna1-kunnr,
name1 like kna1-name1,
flag(1) type c,
end of customer_tab.
data : begin of customerdoc_tab occurs 0,
kunnr like kna1-kunnr,
belnr like bkpf-belnr,
gjahr like bkpf-gjahr,
monat like bkpf-monat,
end of customerdoc_tab.
data : begin of doc_tab occurs 0,
belnr like bkpf-belnr,
gjahr like bkpf-gjahr,
monat like bkpf-monat,
end of doc_tab.
DATA: BEGIN OF BSID_TAB OCCURS 0,
BUKRS LIKE BSID-BUKRS,
PRCTR LIKE BSID-PRCTR,
KUNNR LIKE BSID-KUNNR,
FLAG(1),
UMSKZ LIKE BSID-UMSKZ,
BLART LIKE BSID-BLART,
BELNR LIKE BSID-BELNR,
BUZEI LIKE BSID-BUZEI,
NETDT LIKE BSID-ZFBDT,
ZFBDT LIKE BSID-ZFBDT,
BUDAT LIKE BSID-BUDAT,
BLDAT LIKE BSID-BLDAT,
BSCHL LIKE BSID-BSCHL,
DMBTR LIKE BSID-DMBTR,
SHKZG LIKE BSID-SHKZG,
ZBD1T LIKE BSID-ZBD1T,
ZBD2T LIKE BSID-ZBD2T,
ZBD3T LIKE BSID-ZBD3T,
REBZG LIKE BSID-REBZG,
REBZT LIKE BSID-REBZT,
KOART LIKE BSEG-KOART,
SK1DT LIKE FAEDE-SK1DT,
SK2DT LIKE FAEDE-SK2DT,
DAYSD LIKE SY-TABIX,
END OF BSID_TAB.
ranges : r_bukrs for bsid-bukrs,
r_kunnr for kna1-kunnr.
===================================================================
VARIABLES *******************************
===================================================================
data : v_belnr like bseg-belnr,
v_gjahr like bkpf-gjahr,
v_monat like bkpf-monat,
v_ttlc type p,
v_flag(1) type c,
V_COUNT1(4) TYPE N,
V_COUNT2(4) TYPE N,
V_COUNT3(4) TYPE N,
V_COUNT4(4) TYPE N,
V_COUNT5(4) TYPE N,
V_COUNT6(4) TYPE N,
V_COUNT7(4) TYPE N,
V_COUNT8(4) TYPE N,
V_COUNT9(4) TYPE N,
V_COUNT10(4) TYPE N,
V_NET1 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 1
V_NET2 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 2
V_NET3 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 3
V_NET4 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 4
V_NET5 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 5
V_NET6 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 6
V_NET7 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 7
V_NET8 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 8
V_NET9 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 9
V_NET10 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 10
V_NET11 LIKE BSID-DMBTR, "CALCULATE CUSTOMER AGE 11
V_NET LIKE BSID-DMBTR, "Total Balance of Customer
V_ttlNET1 LIKE BSID-DMBTR,
V_ttlNET2 LIKE BSID-DMBTR,
V_ttlNET3 LIKE BSID-DMBTR,
V_ttlNET4 LIKE BSID-DMBTR,
V_ttlNET5 LIKE BSID-DMBTR,
V_ttlNET6 LIKE BSID-DMBTR,
V_ttlNET7 LIKE BSID-DMBTR,
V_ttlNET8 LIKE BSID-DMBTR,
V_ttlNET9 LIKE BSID-DMBTR,
V_ttlNET10 LIKE BSID-DMBTR,
V_ttlNET11 LIKE BSID-DMBTR,
V_ttlNET LIKE BSID-DMBTR,
v_kunnr like bseg-kunnr,
V_BUTXT like t001-butxt.
********Declare Data Areas for List Viewer ***********
DATA: FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
      FIELDCAT_LN LIKE LINE OF FIELDCAT,
      FIELD TYPE SLIS_FIELDNAME,
      COL_POS TYPE I ,
      PGM LIKE SY-REPID,
      FIELD_VALUE(20),
      TABLE_NAME(10).
===================================================================
SELECTION SCREEN ****************************
===================================================================
selection-screen begin of block b1 with frame title text-001.
parameters : p_bukrs like bseg-bukrs obligatory.
select-options : s_kunnr for kna1-kunnr,
s_BRSCH for kna1-BRSCH,
s_REGIO for kna1-REGIO,
s_KTOKD for kna1-KTOKD,
s_BUSAB for knb1-BUSAB.
selection-screen: end of block b1.
selection-screen begin of block b2 with frame title text-003.
PARAMETERS: DAT LIKE SY-DATUM DEFAULT SY-DATUM.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 01(30) TEXT-002.
SELECTION-SCREEN POSITION POS_LOW.
*PARAMETERS: RASTBIS1 LIKE RFPDO1-ALLGROGR DEFAULT '000'.
*PARAMETERS: RASTBIS2 LIKE RFPDO1-ALLGROGR DEFAULT '030'.
*PARAMETERS: RASTBIS3 LIKE RFPDO1-ALLGROGR DEFAULT '060'.
*PARAMETERS: RASTBIS4 LIKE RFPDO1-ALLGROGR DEFAULT '090'.
*PARAMETERS: RASTBIS5 LIKE RFPDO1-ALLGROGR DEFAULT '120'.
PARAMETERS: RASTBIS1(4) type n DEFAULT '0000'.
PARAMETERS: RASTBIS2(4) type n DEFAULT '0030'.
PARAMETERS: RASTBIS3(4) type n DEFAULT '0060'.
PARAMETERS: RASTBIS4(4) type n DEFAULT '0090'.
PARAMETERS: RASTBIS5(4) type n DEFAULT '0120'.
PARAMETERS: RASTBIS6(4) type n DEFAULT '0150'.
PARAMETERS: RASTBIS7(4) type n DEFAULT '0180'.
PARAMETERS: RASTBIS8(4) type n DEFAULT '0210'.
PARAMETERS: RASTBIS9(4) type n DEFAULT '0240'.
PARAMETERS: RASTBIS0(4) type n DEFAULT '0270'.
SELECTION-SCREEN END OF LINE.
Noted item removed as per FI instruction
PARAMETERS: P_STAND AS CHECKBOX default 'X',
P_NOTED AS CHECKBOX ,
P_SPCAL AS CHECKBOX .
selection-screen: end of block b2.
selection-screen begin of block b3 with frame.
PARAMETERS: allgline like RFPDO1-allgline .
Parameters : p_balyes type c radiobutton group grp9 default 'X',
p_balno type c radiobutton group grp9.
selection-screen: end of block b3.
Check for the Select option
AT SELECTION-SCREEN.
IF P_STAND = '' AND P_SPCAL = '' .
MESSAGE E398(00) WITH 'PLEASE CHOOSE AT LEAST ONE G/L INDICATOR!'.
ENDIF.
Check for Company code Authorization
authority-check object 'F_BKPF_BUK'
ID 'BUKRS' FIELD p_bukrs
ID 'ACTVT' FIELD '03'.
if sy-subrc ne 0.
message e398(00) with 'You are not Authorized for CC ' p_bukrs.
Endif.
===================================================================
START-OF-SELECTION ****************************
===================================================================
START-OF-SELECTION.
V_COUNT1 = RASTBIS1 + 1.
V_COUNT2 = RASTBIS2 + 1.
V_COUNT3 = RASTBIS3 + 1.
V_COUNT4 = RASTBIS4 + 1.
V_COUNT5 = RASTBIS5 + 1.
V_COUNT6 = RASTBIS6 + 1.
V_COUNT7 = RASTBIS7 + 1.
V_COUNT8 = RASTBIS8 + 1.
V_COUNT9 = RASTBIS9 + 1.
V_COUNT10 = RASTBIS0 + 1.
perform extract_data.
Build Field Catalogs **************************
PERFORM BUILD_FIELDCAT.
*******Start List Viewer *******************************
PERFORM START_LIST_VIEWER.
===================================================================
At line Selection *****************************
===================================================================
at line-selection.
if sy-lilli >= 9 .
refresh r_bukrs.
move p_bukrs to r_bukrs-low.
move 'I' to r_bukrs-sign.
move 'EQ' to r_bukrs-option.
append r_bukrs.
refresh r_kunnr.
move customer_tab-kunnr to r_kunnr-low.
move 'I' to r_kunnr-sign.
move 'EQ' to r_kunnr-option.
append r_kunnr.
submit ZFARVR0040 and return
with p_bukrs = p_bukrs
with dat = dat
with p_stand = p_stand
with p_spcal = P_SPCAL
with s_kunnr in r_kunnr.
endif.
===================================================================
Top of Page *******************************
===================================================================
TOP-OF-PAGE.
SELECT SINGLE BUTXT FROM T001 INTO V_BUTXT
WHERE BUKRS = p_BUKRS .
WRITE:/73'Customers Aging Analysis',140'PAGE NO.',
SY-PAGNO.
WRITE:/002 'COMPANY',
011 P_BUKRS,
017 V_BUTXT,
055 allgline centered,
140 'DATE :',
150 sy-datum .
write:/002 'User',
011 sy-UNAME,
140 'Time :',
150 sy-UZEIT.
SKIP.
format color col_heading intensified off.
WRITE:/ SY-ULINE,
SY-VLINE,002 'Customer',
012 SY-VLINE,013 'Name',
043 SY-VLINE,048 'CURRENT',
061 SY-VLINE,065 'FROM ',V_COUNT1,
079 SY-VLINE,083 'FROM ',V_COUNT2,
097 SY-VLINE,101 'FROM ',V_COUNT3,
115 SY-VLINE,119 'FROM ',V_COUNT4,
133 SY-VLINE,137 'FROM ',V_COUNT5,
151 SY-VLINE,155 'FROM ',V_COUNT6,
169 SY-VLINE,173 'FROM ',V_COUNT7,
187 SY-VLINE,191 'FROM ',V_COUNT8,
205 SY-VLINE,209 'FROM ',V_COUNT9,
223 SY-VLINE,228 'FROM ',V_COUNT10,
243 SY-VLINE,248 'TOTAL',
268 SY-VLINE.
WRITE:/ SY-VLINE,002 'Number',
12 SY-VLINE,
43 SY-VLINE,
061 SY-VLINE,065 'TO ',RASTBIS2,
079 SY-VLINE,083 'TO ',RASTBIS3,
097 SY-VLINE,101 'TO ',RASTBIS4,
115 SY-VLINE,119 'TO ',RASTBIS5,
133 SY-VLINE,137 'FROM ',RASTBIS6,
151 SY-VLINE,155 'FROM ',RASTBIS7,
169 SY-VLINE,173 'FROM ',RASTBIS8,
187 SY-VLINE,191 'FROM ',RASTBIS9,
205 SY-VLINE,209 'FROM ',RASTBIS0,
223 SY-VLINE,
243 SY-VLINE,
268 SY-VLINE,
SY-ULINE.
format color off.
===================================================================
END-OF-SELECTION ***************************
===================================================================
end-of-selection.
===================================================================
Form : Extract_Data *
===================================================================
form extract_data.
Select the Customers
Select t1~kunnr t2~name1
into corresponding fields of table customer_tab
from knb1 as t1 inner join kna1 as t2
on t2~kunnr = t1~kunnr
where t1~bukrs = p_bukrs
and t1~kunnr in s_kunnr
and t1~BUSAB in s_busab
and t2~regio in s_regio
and t2~BRSCH in s_BRSCH
and t2~KTOKD in s_KTOKD.
if sy-subrc <> 0.
message e398(00) with 'No Customers Selected'.
endif.
sort customer_tab.
describe table customer_tab lines v_ttlc.
v_ttlc = v_ttlc + 10.
loop at customer_tab.
v_net1 = 0.
v_net2 = 0.
v_net3 = 0.
v_net4 = 0.
v_net5 = 0.
v_net6 = 0.
v_net7 = 0.
v_net8 = 0.
v_net9 = 0.
v_net10 = 0.
v_net11 = 0.
v_net = 0.
perform calculate_ageing
using
p_bukrs
customer_tab-kunnr
dat
RASTBIS1
RASTBIS2
RASTBIS3
RASTBIS4
RASTBIS5
RASTBIS6
RASTBIS7
RASTBIS8
RASTBIS9
RASTBIS0
P_STAND
' ' "noted item
P_SPCAL
changing
v_net1
v_net2
v_net3
v_net4
v_net5
v_net6
v_net7
v_net8
v_net9
v_net10
v_net11
v_net.
if p_balyes = 'X' or v_net > 0.
format color col_total.
write:/ sy-vline,
002 customer_tab-kunnr,
012 SY-VLINE,013(30) customer_tab-name1,
043 SY-VLINE,044(16) v_net1,
061 SY-VLINE,062(16) v_net2,
079 SY-VLINE,080(16) v_net3,
097 SY-VLINE,098(16) v_net4,
115 SY-VLINE,116(16) v_net5,
133 SY-VLINE,134(16) v_net6,
151 SY-VLINE,152(16) v_net7,
169 SY-VLINE,170(16) v_net8,
187 SY-VLINE,188(16) v_net9,
205 SY-VLINE,206(16) v_net10,
223 SY-VLINE,224(16) v_net11,
239 SY-VLINE,240(16) v_net,
258 SY-VLINE.
format color off.
hide : customer_tab-kunnr.
v_ttlnet1 = v_ttlnet1 + v_net1.
v_ttlnet2 = v_ttlnet2 + v_net2.
v_ttlnet3 = v_ttlnet3 + v_net3.
v_ttlnet4 = v_ttlnet4 + v_net4.
v_ttlnet5 = v_ttlnet5 + v_net5.
v_ttlnet6 = v_ttlnet6 + v_net6.
v_ttlnet7 = v_ttlnet7 + v_net7.
v_ttlnet8 = v_ttlnet8 + v_net8.
v_ttlnet9 = v_ttlnet9 + v_net9.
v_ttlnet10 = v_ttlnet10 + v_net10.
v_ttlnet11 = v_ttlnet11 + v_net11.
v_ttlnet = v_ttlnet + v_net.
endif.
endloop.
ULINE.
format color col_total.
write:/ sy-vline,
012 SY-VLINE,012(30) ' T O T A L',
043 SY-VLINE,044(16) v_ttlnet1,
061 SY-VLINE,062(16) v_ttlnet2,
079 SY-VLINE,080(16) v_ttlnet3,
097 SY-VLINE,098(16) v_ttlnet4,
115 SY-VLINE,116(16) v_ttlnet5,
133 SY-VLINE,134(16) v_ttlnet6,
151 SY-VLINE,152(16) v_ttlnet7,
169 SY-VLINE,170(16) v_ttlnet8,
187 SY-VLINE,188(16) v_ttlnet9,
205 SY-VLINE,206(16) v_ttlnet10,
223 SY-VLINE,224(16) v_ttlnet11,
239 SY-VLINE,240(16) v_ttlnet,
258 SY-VLINE.
format color off.
ULINE.
endform.
Function to Calculate Aging.
Form calculate_ageing using
bukrs
kunnr
dat
RASTBIS1
RASTBIS2
RASTBIS3
RASTBIS4
RASTBIS5
RASTBIS6
RASTBIS7
RASTBIS8
RASTBIS9
RASTBIS0
P_STAND
P_NOTED
P_SPCAL
changing
v_net1
v_net2
v_net3
v_net4
v_net5
v_net6
v_net7
v_net8
v_net9
v_net10
v_net11
v_net.
DATA: BEGIN OF BSID_TAB1 OCCURS 0,
BUKRS LIKE BSID-BUKRS,
PRCTR LIKE BSID-PRCTR,
KUNNR LIKE BSID-KUNNR,
FLAG(1),
UMSKZ LIKE BSID-UMSKZ,
BLART LIKE BSID-BLART,
BELNR LIKE BSID-BELNR,
BUZEI LIKE BSID-BUZEI,
NETDT LIKE BSID-ZFBDT,
ZFBDT LIKE BSID-ZFBDT,
BUDAT LIKE BSID-BUDAT,
BLDAT LIKE BSID-BLDAT,
BSCHL LIKE BSID-BSCHL,
DMBTR LIKE BSID-DMBTR,
SHKZG LIKE BSID-SHKZG,
ZBD1T LIKE BSID-ZBD1T,
ZBD2T LIKE BSID-ZBD2T,
ZBD3T LIKE BSID-ZBD3T,
REBZG LIKE BSID-REBZG,
REBZT LIKE BSID-REBZT,
KOART LIKE BSEG-KOART,
SK1DT LIKE FAEDE-SK1DT,
SK2DT LIKE FAEDE-SK2DT,
DAYSD LIKE SY-TABIX,
END OF BSID_TAB1.
RANGES: R_UMSKZ FOR BSID-UMSKZ.
Data : V_ZFBDT Like bsid-ZFBDT,
V_ZBD1T Like bsid-ZBD1T,
V_ZBD2T Like bsid-ZBD2T,
V_ZBD3T Like bsid-ZBD3T,
V_LINES(8) TYPE n.
IF P_NOTED = 'X'. "CHECK NOTED ITEMS
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'D'.
APPEND R_UMSKZ.
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'L'.
APPEND R_UMSKZ.
ENDIF.
IF P_STAND = 'X'. "CHECK STANDARD ITEMS
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = ' '.
APPEND R_UMSKZ.
ENDIF.
IF P_SPCAL = 'X'. "CHECK SPECIAL G/L TRANSACTION
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'A'.
APPEND R_UMSKZ.
R_UMSKZ-SIGN = 'I'.
R_UMSKZ-OPTION = 'EQ'.
R_UMSKZ-LOW = 'B'.
APPEND R_UMSKZ.
ENDIF.
SELECT * FROM BSID INTO CORRESPONDING FIELDS OF TABLE BSID_TAB
WHERE BUKRS = BUKRS AND
budat <= dat AND
KUNNR = KUNNR AND
UMSKZ in R_UMSKZ.
SELECT * FROM BSAD appending CORRESPONDING FIELDS OF TABLE BSID_TAB
WHERE BUKRS = BUKRS AND
budat <= dat AND
augdt >= dat AND
KUNNR = KUNNR AND
UMSKZ in R_UMSKZ.
DESCRIBE TABLE BSID_TAB LINES V_LINES.
LOOP AT BSID_TAB.
if bsid_tab-BLART = 'DZ'.
Select single ZFBDT ZBD1T ZBD2T ZBD3T
into (V_ZFBDT,V_ZBD1T,V_ZBD2T,V_ZBD3T)
from bsid where BUKRS = BUKRS
and kunnr = bsid_tab-kunnr
and BELNR = bsid_tab-REBZG.
if sy-subrc = 0.
bsid_tab-ZFBDT = V_ZFBDT.
bsid_tab-ZBD1T = V_ZBD1T.
bsid_tab-ZBD2T = V_ZBD2T.
bsid_tab-ZBD3T = V_ZBD3T.
else.
Select single ZFBDT ZBD1T ZBD2T ZBD3T
into (V_ZFBDT,V_ZBD1T,V_ZBD2T,V_ZBD3T)
from bsad where BUKRS = BUKRS
and kunnr = bsid_tab-kunnr
and BELNR = bsid_tab-REBZG.
if sy-subrc <> 0.
bsid_tab-ZFBDT = V_ZFBDT.
bsid_tab-ZBD1T = V_ZBD1T.
bsid_tab-ZBD2T = V_ZBD2T.
bsid_tab-ZBD3T = V_ZBD3T.
endif.
endif.
endif.
IF BSID_TAB-SHKZG = 'H'.
BSID_TAB-DMBTR = BSID_TAB-DMBTR * ( - 1 ).
ENDIF.
bsid_tab-netdt = bsid_tab-ZFBDT.
bsid_tab-netdt = bsid_tab-budat.
bsid_tab-koart = 'D'.
MODIFY BSID_TAB.
PERFORM CALC_DUE_DATE USING BSID_TAB.
BSID_TAB-DAYSD = DAT - BSID_TAB-NETDT.
IF BSID_TAB-DAYSD <= RASTBIS1.
V_NET1 = V_NET1 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS2.
V_NET2 = V_NET2 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS3.
V_NET3 = V_NET3 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS4.
V_NET4 = V_NET4 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS5.
V_NET5 = V_NET5 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS6.
V_NET6 = V_NET6 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS7.
V_NET7 = V_NET7 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS5.
V_NET8 = V_NET8 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS9.
V_NET9 = V_NET9 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD <= RASTBIS0.
V_NET10 = V_NET10 + BSID_TAB-DMBTR.
ELSEIF BSID_TAB-DAYSD > RASTBIS0.
V_NET11 = V_NET11 + BSID_TAB-DMBTR.
ENDIF.
V_NET = V_NET + BSID_TAB-DMBTR.
MODIFY BSID_TAB.
ENDLOOP.
endform.
Calculate Due Date
FORM CALC_DUE_DATE USING P_BSID_TAB STRUCTURE BSID_TAB.
DATA : REFE TYPE P.
IF P_BSID_TAB-KOART = 'K' OR P_BSID_TAB-KOART = 'D'.
IF P_BSID_TAB-ZFBDT IS INITIAL.
P_BSID_TAB-ZFBDT = P_BSID_TAB-BLDAT.
ENDIF.
*Nettofälligkeit bestimmen--
IF NOT P_BSID_TAB-ZBD3T IS INITIAL.
REFE = P_BSID_TAB-ZBD3T.
ELSE.
IF NOT P_BSID_TAB-ZBD2T IS INITIAL.
REFE = P_BSID_TAB-ZBD2T.
ELSE.
REFE = P_BSID_TAB-ZBD1T.
ENDIF.
ENDIF.
*Nichtrechnungsbezogene Gutschriften sind sofort fällig--
IF P_BSID_TAB-KOART = 'D' AND P_BSID_TAB-SHKZG = 'H'
OR P_BSID_TAB-KOART = 'K' AND P_BSID_TAB-SHKZG = 'S'.
IF P_BSID_TAB-REBZG IS INITIAL.
REFE = 0.
ENDIF.
ENDIF.
P_BSID_TAB-NETDT = P_BSID_TAB-ZFBDT + REFE.
*Skontofälligkeiten bestimmen--
IF NOT P_BSID_TAB-ZBD2T IS INITIAL.
P_BSID_TAB-SK2DT = P_BSID_TAB-ZFBDT + P_BSID_TAB-ZBD2T.
ELSE.
P_BSID_TAB-SK2DT = P_BSID_TAB-NETDT.
ENDIF.
IF NOT P_BSID_TAB-ZBD1T IS INITIAL
OR NOT P_BSID_TAB-ZBD2T IS INITIAL.
P_BSID_TAB-SK1DT = P_BSID_TAB-ZFBDT + P_BSID_TAB-ZBD1T.
ELSE.
P_BSID_TAB-SK1DT = P_BSID_TAB-NETDT.
ENDIF.
*Nichtrechnungsbezogene Gutschriften sind sofort fällig--
IF P_BSID_TAB-KOART = 'D' AND P_BSID_TAB-SHKZG = 'H'
OR P_BSID_TAB-KOART = 'K' AND P_BSID_TAB-SHKZG = 'S'.
IF P_BSID_TAB-REBZG IS INITIAL.
P_BSID_TAB-SK2DT = P_BSID_TAB-NETDT.
P_BSID_TAB-SK1DT = P_BSID_TAB-NETDT.
ENDIF.
ENDIF.
ELSE.
MESSAGE E122 RAISING ACCOUNT_TYPE_NOT_SUPPORTED.
ENDIF.
E_FAEDE = FAEDE.
ENDFORM.
*&      Form BUILD_FIELDCAT
FORM BUILD_FIELDCAT .
PGM = SY-REPID.
FIELD      = 'give field name'.
TABLE_NAME = 'give table name'.
PERFORM FIELDCAT_FILL USING FIELD.
and so on for the no. of fields you want to display
ENDFORM.                    " BUILD_FIELDCAT
*&      Form START_LIST_VIEWER
FORM START_LIST_VIEWER.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
   I_INTERFACE_CHECK              = ' '
     I_CALLBACK_PROGRAM             = PGM
   I_CALLBACK_PF_STATUS_SET       = ' '
     I_CALLBACK_USER_COMMAND        = 'USER_COMMAND'
   I_STRUCTURE_NAME               =
   IS_LAYOUT                      =
     IT_FIELDCAT                    = FIELDCAT
   IT_EXCLUDING                   =
   IT_SPECIAL_GROUPS              =
   IT_SORT                        =
   IT_FILTER                      =
   IS_SEL_HIDE                    =
     I_DEFAULT                      = 'X'
     I_SAVE                         = 'A'
   IS_VARIANT                     =
   IT_EVENTS                      =
   IT_EVENT_EXIT                  =
   IS_PRINT                       =
   IS_REPREP_ID                   =
   I_SCREEN_START_COLUMN          = 0
   I_SCREEN_START_LINE            = 0
   I_SCREEN_END_COLUMN            = 0
   I_SCREEN_END_LINE              = 0
   IR_SALV_LIST_ADAPTER           =
   IT_EXCEPT_QINFO                =
   I_SUPPRESS_EMPTY_DATA          = ABAP_FALSE
IMPORTING
   E_EXIT_CAUSED_BY_CALLER        =
   ES_EXIT_CAUSED_BY_USER         =
   TABLES
     T_OUTTAB                       = FINAL TAB(OUTPUT STATEMENTS TABLE)
EXCEPTIONS
    PROGRAM_ERROR                   = 1
    OTHERS                          = 2.
ENDFORM.                    " START_LIST_VIEWER
*&      Form FIELDCAT_FILL
      text
FORM FIELDCAT_FILL USING FIELD_VALUE.
ADD 1 TO COL_POS.
FIELDCAT_LN-REF_TABNAME = TABLE_NAME.
FIELDCAT_LN-FIELDNAME = FIELD_VALUE.
FIELDCAT_LN-KEY = SPACE.
FIELDCAT_LN-DO_SUM = SPACE.
FIELDCAT_LN-COL_POS = COL_POS.
FIELDCAT_LN-NO_OUT = SPACE.
FIELDCAT_LN-QFIELDNAME = SPACE.
FIELDCAT_LN-HOTSPOT = SPACE.
APPEND FIELDCAT_LN TO FIELDCAT.
ENDFORM.                    " FIELDCAT_FILL
Reward points if you find this helpful
Regards,
Harini

How to design Customized ALV report like normal report !

Hello Friends,
              I like to design a ALV report, with sub headers, sub totals, summary total and other summary details like percentage sale, which is not relavent to the fields displayed in the ALV.
I know it is possible to get total of the displayed field, but is it possible to design flexible ALV report like normal report.
Could U please provide example code, if available.
Thank you,
Senthil

HI,
Just check this example.
REPORT ZLAXMI_ALVEXER2 MESSAGE-ID ZZ                       .
*& TABLES DECLARATION                                                  *
TABLES: VBAK.
*& TYPE POOLS DECLARATION                                              *
TYPE-POOLS: SLIS.
*& INTERNAL TABLE DECLARATION                                          *
DATA: BEGIN OF ITAB OCCURS 0,
       ICON TYPE ICON-ID,
       VBELN LIKE VBAK-VBELN,
       AUDAT LIKE VBAK-AUDAT,
       VBTYP LIKE VBAK-VBTYP,
       AUART LIKE VBAK-AUART,
       AUGRU LIKE VBAK-AUGRU,
       NETWR LIKE VBAK-NETWR,
       WAERK LIKE VBAK-WAERK,
    END OF ITAB.
*INTERNAL TABLE FOR FIELD CATALOG
DATA: WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
    IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
IT_FIELDCAT TYPE STANDARD TABLE OF SLIS_FIELDCAT_ALV
           WITH HEADER LINE,
*INTERNAL TABLE FOR EVENTS
DATA:    IT_EVENT TYPE SLIS_T_EVENT,
      WA_EVENT TYPE SLIS_ALV_EVENT,
*INTERNAL TABLE FOR SORTING
      IT_SORT TYPE SLIS_T_SORTINFO_ALV,
      WA_SORT TYPE SLIS_SORTINFO_ALV,
*INTERNAL TABLE FOR LAYOUT
      WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
*& VARIABLE DECLARATION                                                *
DATA : V_REPID TYPE SY-REPID,
       V_PAGNO(4) TYPE N,
       V_DATE(8) TYPE C.
*& CONSTANTS                                                           *
CONSTANTS: C_X TYPE C VALUE 'X'.
*& SELECTION SCREEN                                                    *
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_VBELN FOR VBAK-VBELN,
                S_VBTYP FOR VBAK-VBTYP DEFAULT 'C'.
SELECTION-SCREEN: END OF BLOCK B1.
SELECTION-SCREEN: BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
SELECTION-SCREEN : BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(20) TEXT-003.
PARAMETERS: P_LIST RADIOBUTTON GROUP RAD1 DEFAULT 'X'.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(20) TEXT-004.
PARAMETERS: P_GRID RADIOBUTTON GROUP RAD1.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN: END OF BLOCK B2.
AT SELECTION-SCREEN.
PERFORM VALIDATE_SCREEN.
*& START OF SELECTION                                               *
START-OF-SELECTION.
CLEAR: ITAB, ITAB[].
V_REPID = SY-REPID.
PERFORM GET_DATA.
PERFORM DISPLAY_DATA.
*& END OF SELECTION                                                    *
END-OF-SELECTION.
*--DO ALV Process
V_REPID = SY-REPID.
*--Sort the Output Fields
PERFORM SORT_FIELDS.
*--Build Field catalog for the Output fields
PERFORM BUILD_FIELDCAT.
*--Set the Layout for ALV
PERFORM SET_LAYOUT.
*&      Form GET_DATA
      text
TO GET THE DATA FROM TABLES INTO ITAB
FORM GET_DATA .
SELECT VBELN
         AUDAT
         VBTYP
         AUART
         AUGRU
         NETWR
         WAERK
         INTO CORRESPONDING FIELDS OF TABLE ITAB
         FROM VBAK
         WHERE VBELN IN S_VBELN AND
         AUDAT > '04.04.2005'
         AND NETWR > 0.
LOOP AT ITAB.
    IF ITAB-NETWR < 10000.
      ITAB-ICON = '@08@'.
    ELSEIF ITAB-NETWR > 10000 AND ITAB-NETWR < 100000.
      ITAB-ICON = '@09@'.
    ELSEIF ITAB-NETWR > 100000.
      ITAB-ICON = '@0A@'.
    ENDIF.
    MODIFY ITAB INDEX SY-TABIX.
ENDLOOP.
ENDFORM.                    " GET_DATA
*&      Form sort_fields
FORM SORT_FIELDS .
CLEAR WA_SORT.
WA_SORT-FIELDNAME = 'VBTYP'.
WA_SORT-SPOS = '1'.
WA_SORT-UP = 'X'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
WA_SORT-FIELDNAME = 'NETWR'.
WA_SORT-SPOS = '2'.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO IT_SORT.
ENDFORM.                    " sort_fields
*&      Form build_fieldcat
*FORM BUILD_FIELDCAT .
IT_FIELDCAT-COL_POS    = '1'.
IT_FIELDCAT-FIELDNAME = 'ICON'.
IT_FIELDCAT-KEY        = 'X'.
IT_FIELDCAT-OUTPUTLEN = '10'.
IT_FIELDCAT-SELTEXT_L = 'LIGHT'.
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
IT_FIELDCAT-COL_POS    = '2'.
IT_FIELDCAT-FIELDNAME = 'VBELN'.
IT_FIELDCAT-KEY        = 'X'.
IT_FIELDCAT-OUTPUTLEN = '10'.
IT_FIELDCAT-SELTEXT_L = 'SALES DOC NUMBER'(009).
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
IT_FIELDCAT-COL_POS    = '3'.
IT_FIELDCAT-FIELDNAME = 'AUDAT'.
IT_FIELDCAT-KEY        = 'X'.
IT_FIELDCAT-OUTPUTLEN = '4'.
IT_FIELDCAT-SELTEXT_L = 'DOCUMENT DATE'(010).
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
IT_FIELDCAT-COL_POS    = '4'.
IT_FIELDCAT-FIELDNAME = 'VBTYP'.
IT_FIELDCAT-KEY        = 'X'.
IT_FIELDCAT-OUTPUTLEN = '4'.
IT_FIELDCAT-SELTEXT_L = 'CATEGORY'(011).
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
IT_FIELDCAT-COL_POS    = '5'.
IT_FIELDCAT-FIELDNAME = 'AUART'.
IT_FIELDCAT-OUTPUTLEN = '4'.
IT_FIELDCAT-SELTEXT_L = 'DOCUMENT TYPE'(012).
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
IT_FIELDCAT-COL_POS    = '6'.
IT_FIELDCAT-FIELDNAME = 'AUGRU'.
IT_FIELDCAT-OUTPUTLEN = '12'.
IT_FIELDCAT-SELTEXT_L = 'Order reason'(013).
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
IT_FIELDCAT-COL_POS    = '7'.
IT_FIELDCAT-FIELDNAME = 'NETWR'.
IT_FIELDCAT-OUTPUTLEN = '12'.
IT_FIELDCAT-SELTEXT_L = 'NET VALUE'(014).
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
IT_FIELDCAT-COL_POS    = '8'.
IT_FIELDCAT-FIELDNAME = 'WAERK'.
IT_FIELDCAT-OUTPUTLEN = '12'.
IT_FIELDCAT-SELTEXT_L = 'SD DOC CURR'(015).
APPEND IT_FIELDCAT.
CLEAR IT_FIELDCAT.
*ENDFORM.                    " build_fieldcat
*&      Form set_layout
FORM SET_LAYOUT .
IF P_LIST = C_X .
    WA_LAYOUT-WINDOW_TITLEBAR = 'LIST DISPLAY'(016).
    WA_LAYOUT-ZEBRA = 'X'.
*-- ALV LIST DISPLAY
    PERFORM LIST_DISPLAY TABLES ITAB.
*-- ALV GRID DISPLAY
ELSEIF P_GRID = C_X.
    WA_LAYOUT-WINDOW_TITLEBAR = 'GRID DISPLAY'(017).
    WA_LAYOUT-ZEBRA = 'X'.
    PERFORM GRID_DISPLAY TABLES ITAB.
ENDIF.
ENDFORM.                    " set_layout
*&      Form list_display
FORM LIST_DISPLAY TABLES   P_ITAB .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM = V_REPID
      IS_LAYOUT          = WA_LAYOUT
      IT_FIELDCAT        = IT_FIELDCAT[]
      IT_SORT            = IT_SORT[]
      I_SAVE             = 'U'
    TABLES
      T_OUTTAB           = ITAB
    EXCEPTIONS
      PROGRAM_ERROR      = 1
      OTHERS             = 2.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " list_display
*&      Form GRID_DISPLAY
FORM GRID_DISPLAY TABLES   P_ITAB .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM = V_REPID
      IS_LAYOUT          = WA_LAYOUT
      IT_FIELDCAT        = IT_FIELDCAT[]
      IT_SORT            = IT_SORT[]
      IT_EVENTS          = IT_EVENT
    TABLES
      T_OUTTAB           = ITAB
    EXCEPTIONS
      PROGRAM_ERROR      = 1
      OTHERS             = 2.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " GRID_DISPLAY
*&      Form VALIDATE_SCREEN
      text
--> p1        text
<-- p2        text
FORM VALIDATE_SCREEN .
DATA: LV_VBELN LIKE VBAK-VBELN.
IF NOT S_VBELN IS INITIAL.
    SELECT VBELN
    INTO LV_VBELN
    UP TO 1 ROWS
    FROM VBAK
    WHERE VBELN IN S_VBELN.
    ENDSELECT.
    IF SY-SUBRC <> 0.
      MESSAGE E000 WITH 'INVALID SALES DOC'.
    ENDIF.
ENDIF.
ENDFORM.                    " VALIDATE_SCREEN
*&      Form display_data
      text
--> p1        text
<-- p2        text
FORM DISPLAY_DATA .
DEFINE M_FIELDCAT.
    ADD 1 TO WA_FIELDCAT-COL_POS.
    WA_FIELDCAT-FIELDNAME   = &1.
    WA_FIELDCAT-REF_TABNAME = 'VBAK'.
    WA_FIELDCAT-DO_SUM      = &2.
    WA_FIELDCAT-CFIELDNAME = &3.
    APPEND WA_FIELDCAT TO IT_FIELDCAT.
END-OF-DEFINITION.
DATA:
    LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
    LT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
M_FIELDCAT 'ICON' '' ''.
M_FIELDCAT 'VBELN' '' ''.
M_FIELDCAT 'AUDAT' '' ''.
M_FIELDCAT 'VBTYP' '' ''.
M_FIELDCAT 'AUART' '' ''.
M_FIELDCAT 'AUGRU' '' ''.
M_FIELDCAT 'NETWR' 'C' 'WAERK'.
M_FIELDCAT 'WAERK' '' ''.
ENDFORM.                    " display_data
Regards
Laxmi

How to I activate the "insert link" function which accepts a saved/pasted address for highlighted text in V31.0?

It worked perfectly in prior versions, but now in this version 31.0, when I try to paste a saved URL as a link into highlighted text, it returns this error message: "(No named anchors or headings in this page)", and refuses to accept a paste. Note that this is broken both when clicking on the little blue screen icon as well as when selecting "insert/link" from the function bar. I've looked everywhere for some sort of new configuration option to correct this, but to no avail. What am I missing?

No, that's not the issue. I am writing simple text in an outgoing message, then highlighting a few words (such as "click here to visit the site"), then when I use any of the three methods to assign a link to those highlighted words (Ctrl L, insert/link, or clicking on the little blue screen icon), the normal window opens with a box to insert the URL, but when I try to PASTE such a saved URL into that box, the aforementioned error message appears. Note that I can manually TYPE a URL into that box with no problem, but version 31 will not allow me to PASTE one. I've always successfully used exactly that procedure with prior versions.
Note also that when I insert an image into an outgoing message and try to paste a link to it in the same way, the same error message pops up. That also always worked in prior versions.
Because e-mail is crucial to me, I have now re-installed a prior version (24.6.0) of Thunderbird in which this function works perfectly, so for now, problem solved. But I hope you can fix this so I can use future versions.
BTW ... I'm using Windows 7 Professional on a PC running an Intel 64-bit 7 core processor.

[SOLVED] Highlighted text in the shell, appearance rxvt-unicode

Hi,
Short question, when I highlight text in the shell or when text get highlighted in ncmpcpp or outer app running in the shell it gets basically impossible to read. Because background to text get the same color and strength then the text.
what setting should I look for to change what it look like when I mark and highlight text in the shell?
Thank you!
All the best,
Christer
Last edited by agkbill (2012-10-13 20:41:41)

Additional info.
I am using i3 as window manager and terminal emulator "rxvt-unicode-256color"
.xinitrc
# set the cursor
xsetroot -cursor_name left_ptr
# set German keyboard layout
# setxkbmap -layout de
# start xmonad
#Power management turn off monitor etc
#xset dpms 0 7200 10800 &
xset -dpms; xset s off
# xloadimage laddar bakgrundsbild fick det inte att fungera tillsamans med xcompmgr som man
# använder för att få genomskinliga terminal fönster mm. Ersätter med bildvisaren "feh"
#xloadimage -onroot -fullscreen /home/christer/devices-extern/windows7/archlinux/stone_wall_ce.png
xrdb -merge ~/.Xresources # Denna rad behövs ifall man vill använda TERMINAL/emulator "urxvt"
feh --bg-scale /home/christer/devices-extern/windows7/archlinux/stone_wall_ce.png
setxkbmap -layout "us, se" -option "grp:alt_shift_toggle" #alt"grp:caps_toggle"
xcompmgr -c &
#xmonad
#awesome
exec /usr/bin/i3 -V -d all >~/i3log/i3log-$(date +'%F-%k-%M-%S') 2>&1
.Xresources
# transparency - true or false (default)
#URxvt*transparent: true
# tint with any color; i.e., blue, red, tomato4, olivedrab2, etc.
# some nice listings are at:
# http://www.nisrv.com/drupal/?q=node/11
# http://www.htmlgoodies.com/tutorials/colors/article.php/3478921
URxvt*tintColor: white
URxvt*inheritPixmap: true
# shading - 0 to 99 darkens, 101 to 200 lightens.
# Don't use with tintColor; just use a darker or lighter color instead.
#URxvt*shading: 40
# scrollback buffer lines - 65535 is max on most machines (64 is default)
URxvt*saveLines: 12000
# font color (default is black)
URxvt*foreground: DarkSlateGray1
# background color (prior to tinting) (default is white)
URxvt.depth: 32
URxvt.background: [10]#black
# Xft (X FreeType) with Bitstream, DejaVu, Liberation, or Terminus fonts:
# Fedora/debian packages: libXft/libxft2
# An anti-aliased font setup with Xft looks fantastic; it can be a bit choppy
# on older systems. You can always turn off anti-aliasing (antialias=false) if
# your terminal is sluggish. Use only ONE of the Xft pairs below:
# Xft: Bitstream fonts
# Fedora/debian packages: bitstream-vera-sans-mono-fonts/ttf-bitstream-vera
#URxvt*font: xft:Bitstream Vera Sans Mono:pixelsize=12:antialias=true:hinting=true
#URxvt*boldFont: xft:Bitstream Vera Sans Mono:bold:pixelsize=12:antialias=true:hinting=true
# Xft: DejaVu fonts
# Fedora/debian packages: dejavu-sans-mono-fonts/ttf-dejavu
URxvt*font: xft:DejaVu Sans Mono:pixelsize=12:antialias=true:hinting=true
URxvt*boldFont: xft:DejaVu Sans Mono:bold:pixelsize=12:antialias=true:hinting=true
# Xft: Liberation fonts
# Fedora/debian packages: liberation-mono-fonts/ttf-liberation
#URxvt*font: xft:Liberation Mono:pixelsize=13:antialias=true:hinting=true
#URxvt*boldFont: xft:Liberation Mono:bold:pixelsize=13:antialias=true:hinting=true
# Xft: Terminus fonts
# Fedora/debian packages: terminus-fonts/xfonts-terminus
#URxvt*font: xft:terminus:pixelsize=15
#URxvt*boldFont: xft:terminus:bold:pixelsize=15
# Traditional fonts - a more traditional font setup in lieu of xft
#URxvt*font:-*-courier-medium-r-normal-*-14-*-*-*-*-*-iso8859-1
#URxvt*boldFont:-*-courier-bold-r-normal-*-14-*-*-*-*-*-iso8859-1
# Replace blue folder colors with a lighter shade for clarity. To
# set colored folders and files within urxvt, xterm, and aterm, add
# the following line to your ~/.bashrc ($HOME/.bashrc) file under
# the heading "# User specific aliases and functions":
# alias ls="ls -h --color=auto"
URxvt*color4: RoyalBlue
URxvt*color12: RoyalBlue
# scrollbar - true (default) or false
URxvt*scrollBar: false
# scrollbar position - left=false (default) or right=true
URxvt*scrollBar_right: false
# scrollbar style - rxvt (default), plain, next, or xterm
URxvt*scrollstyle: plain
#Fade the text by the given percentage when focus is lost.
URxvt*enable-fading on
URxvt*fade 50
URxvt*fadecolor black
Biggest problem is when I running console based applications like ncmpcpp or ranger.
Last edited by agkbill (2012-10-13 08:34:28)

Is there any class similar as cl_GUi_alv_grid for normal report

we have a requirement to put one report some part of in the screen.
so we know there is class on which we can display ALV
i.e "cl_GUi_alv_grid".in the same way is there any class in which we can use as a normal report.
right now i have an idea of keeping a container on the screen and i want some class whcih can handle as normal report.
please help. this is very urgent.
Thanks & Regards
Anil Kumar K

END_OF_LIST will trigger at the end of list only. but to see the o/p u have to pass print parameters into set_table_for firstdisplay.
DATA: lt_lvcfieldcat type lvc_t_fcat,
ls_lvcfieldcat type lvc_s_fcat,
LS_PRINT TYPE LVC_S_PRNT.
CLASS LCL_EVENT_RECEIVER DEFINITION.
PUBLIC SECTION.
    METHODS HANDLE_TOP_OF_PAGE
    FOR EVENT PRINT_TOP_OF_PAGE OF CL_GUI_ALV_GRID.
    METHODS HANDLE_END_OF_LIST
    FOR EVENT PRINT_END_OF_LIST OF CL_GUI_ALV_GRID.
ENDCLASS.                    "cl_event_receiver DEFINITION
      CLASS CL_EVENT_RECEIVER IMPLEMENTATION
CLASS LCL_EVENT_RECEIVER IMPLEMENTATION.
METHOD HANDLE_TOP_OF_PAGE.
    perform top_of_page.
ENDMETHOD .                    "handle_top_of_page
METHOD HANDLE_END_OF_LIST .
    PERFORM END_OF_LIST.
ENDMETHOD .                    "handle_end_of_list
ENDCLASS .                    "cl_event_receiver IMPL
*&      Form TOP_OF_PAGE
      text
FORM TOP_OF_PAGE.
DATA: V_HEAD LIKE YBUYOFFQA_QDMST-QA_DESC.
SKIP 1.
SELECT SINGLE QA_DESC FROM YBUYOFFQA_QDMST INTO V_HEAD
WHERE QUALITYAUDIT = S_AUDIT-LOW.
FORMAT INTENSIFIED OFF.
WRITE: 40 'V-MSD/AM8',70 'DATE :'.
WRITE:/40 'REVISION NO.01', 70 'SHIFT:'.
SKIP 1.
WRITE:/35 V_HEAD .
ENDFORM.                    "TOP_OF_PAGE
*&      Form END_OF_LIST
      text
FORM END_OF_LIST.
SKIP.
uline at 1(44).
WRITE:/ sy-vline,
8 'No. Of Vehicles without any defects',44 sy-vline.
write:/ sy-vline, 'FRC%=',10 sy-uline(35).
write:/ sy-vline,12 'No. Of Vehicles Checked',44
sy-vline.
write:/ sy-uline(44).
uline at 1(44).
skip.
uline at 1(47).
WRITE:/ sy-vline,
8 'No. Of Vehicles worked within tact time',47 sy-vline.
write:/ sy-vline, 'FBO%=',10 sy-uline(38).
write:/ sy-vline,12 'No. Of Vehicles Checked',47
sy-vline.
write:/ sy-uline(47).
uline at 1(47).
ENDFORM.                    "END_OF_LIST
*&      Form PRINT_PARAMS
      text
--> p1        text
<-- p2        text
FORM PRINT_PARAMS .
LS_PRINT-GRPCHGEDIT = 'X'.
LS_PRINT-RESERVELNS = '3'.
LS_PRINT-NO_COLWOPT = 'X'.
ENDFORM.                    " PRINT_PARAMS
********display data******
perform PRINT_PARAMS.
CALL METHOD GO_GRID->SET_TABLE_FOR_FIRST_DISPLAY
    EXPORTING
      IS_LAYOUT            = LS_LVCLAYOUT
      IS_PRINT             = LS_PRINT
      IT_TOOLBAR_EXCLUDING = IT_EXCLUDE
    CHANGING
      IT_OUTTAB            = <TEMP_TAB>
      IT_FIELDCATALOG      = LT_LVCFIELDCAT[]
      IT_SORT              = LVC_TSORT[].
ENDFORM.                    " DISP_DATA

Highlight text for Print

I am trying to find a way to be able to highlight text in a document and and then print it with the text highlighted (as you would when reading an article and marking thru important points with a pen highlighter) Also how would I highlight multiple but different text lines so that they all show? I can't seem to find a key that will allow it. (ie. control or option key)
Thanks for your advice,
Glen

ApleWorks doesn't provide for any method to directly "highlight text for printing," or for display on a monitor, for that matter. The 'highlighting' you see after dragging across a line or block of text is an indication that the text is Selected, and may now be manipulated, but tat highlighting will not appear on a printed page.
You can "place a colour block behind" the text to create an effect similar to running a hi-liter across the text on a printed page, it's fairly easy, and the result will print.
Show the Tools palette (Window > Show tools, or click the red toolbox at the lower left of the document window).
Use the Rectangle tool to draw a rectangle that just covers the text you want to highlight.
Use the Fill formatting button then the color palette to select a highlight colour. Repeat using the formatting button then the color palette to set the line colour to the same value as the fill colour.
Copy the rectangle so that you can re-use it.
Go Arrange > Move to back to place the rectangle behind the (now highlighted) text.
Still in Draw mode (you should have the Arrow mouse pointer—if not, click on the Selection tool {arrow} in the tools palette), Paste another copy of the coloured rectangle, drag it to the next line of text you want to highlight, and adjust the length to cover the text to be highlighted. Move to back as above. Repeat as necessary.
NOTE that these rectangles are not part of the text, but floating objects. If you edit text above the highlighted portion, change fonts or size, or change style (eg. to bold), the text to be highlighted will move, but the rectangles will not. Best to leave this highlighting until you've finished otherwise revising text.
NOTE2: When resizing small rectangles like this, it's easy to change their height when trying to change only their length.
TIP: When you have one the right size for the text size and font you are using, select it, then go Options > Object size... and note the height of the object, reported in the second box in the right column. For subsequent highlight rectangles, after adjusting the length to fit the text to be highlighted, open the Object size dialogue, enter the correct size into the Height box, then press tab to confirm the entry.
Regards,
Barry

How to refresh screen in normal reports?

Hi Experts,
I am developing normal report. I am writing the output using write statement.
In my out put one filed is check box.
Suppose I have 12 records in the output, if I tick the 2 records and process these records using application tool bar button,
After that I need to refresh the screen and output should be only 10 records needs to be displayed.
How to do this requirement? Please suggest on this.
Thanks in Advance,
Uru2019s Harsha

Hai Harsha,
Please look at the following given Code May be helpful for you.
TYPES : BEGIN OF str_mard ,
        matnr TYPE mard-matnr,
        lgort TYPE mard-lgort,
        werks TYPE mard-werks,
        END OF str_mard.
DATA : wa_mard TYPE str_mard,
       it_mard TYPE TABLE OF str_mard.
data : BEGIN OF str_makt occurs 0,
chkbx type checkbox,
matnr TYPE makt-matnr,
maktg TYPE makt-maktg,
END OF str_makt.
DATA : wa_makt.
data: it_makt like str_makt OCCURS 0 WITH HEADER LINE.
data: lines type i.
PARAMETERS : plant TYPE mard-werks,
             stor LIKE mard-lgort.
DATA: matnr like mseg-matnr,
      maktx like makt-maktx.
SET PF-STATUS 'MYLIST'.
START-OF-selection.
perform fetch_data.
PERFORM display_data.
*&      Form fetch_data
*       text
FORM fetch_data.
if sy-ucomm <> 'SAVE'.
    SELECT matnr lgort werks FROM mard
       INTO CORRESPONDING FIELDS OF TABLE it_mard
                                WHERE lgort = stor
                                  AND werks = plant.
    SELECT matnr maktg FROM makt
INTO CORRESPONDING FIELDS OF TABLE it_makt FOR ALL ENTRIES IN it_mard
                            WHERE matnr = it_mard-matnr AND spras = 'E'.
endif.
if sy-ucomm = 'SAVE'.
    describe table it_makt lines lines.
    do lines times.
      READ LINE sy-index FIELD VALUE it_makt-chkbx it_makt-matnr
                                     it_makt-maktg.
      IF it_makt-chkbx = 'X'.
        matnr = it_makt-matnr.
        maktx = it_makt-maktg.
        read table it_makt WITH KEY matnr = it_makt-matnr
                               maktg = it_makt-maktg.
        clear it_makt.
        modify it_makt index sy-tabix.
      endif.
    enddo.
endif.
endform.                    "fetch_data
*&      Form display_data
*       text
form display_data.
LOOP AT it_makt.
    WRITE : /1 it_makt-matnr COLOR 1,
            40 it_makt-maktg COLOR 2,
            85 it_makt-chkbx as CHECKBOX input on.
    HIDE: it_makt-matnr,it_makt-chkbx.
ENDLOOP.
endform.                    "display_data
At USER-COMMAND.
clear it_makt.
case sy-ucomm.
    when 'SAVE'.
      perform fetch_data.
      perform display_data.
endcase.
Edited by: shelly Malik on Aug 1, 2009 8:58 AM

Can't highlight text in blue to edit

My Pages has just started doing this recently. When I go to highlight text it only highlights in gray and not the usual blue. And of course it will not let me edit. Has any one seen this or have any idea what is causing this?
I have an iMac running 10.10 and I am using Pages 4.3 I also have Pages 5.5.2 open because I need to view other files.

Blue is normal selected text.
Orange is placeholder text.
Grey can be a link. Of course it doesn't have to be a link, just declared as one. Clicking on it should have the Link edit dialog pop up, click on edit and remove.
Peter

Diff between normal report and Smart forms

Hi Experts,
I am a fresher, i have only a basic knowledge in sap. please help me to improve my knowledge...
I have some doubts???
1) What the difference between normal report(created using SE38 interactive and classic) and smart forms report???
2) whether we will use any even in script and smart form???
Please do the needfull...
thanesh

Hi
in smartforms and in scripts we write a driver program to execute the smatform /script.
we can write the code in the smartform iteself also.
1. The adaption of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc

IBooks won't let me highlight text that is inside a table!

Hey All,
This seems really silly but when I create a table inside iBooks author and preview it on my iPad, I cannot select text inside the table to highlight, search, or make notes on. It's just a static table. In the book I'm creating, there is so much info inside tables that students will want to highlight and use as study cards so I've got to find a workaround. I know you can highlight text added inside a shape and I've thought about making a bunch of rectangles and fitting the text in there but it's much more work for me and seems like a "mickey mouse" way of doing things. Does anyone have any better solutions I could try?
Any help would be greatly appreciated, thanks!
Caleb

Try deleting it and redownloading. If that doesn't work, try using the Report a Problem link on your receipt.

Highlighted text in Normal report.

Similar Messages

Maybe you are looking for