Highlighting button picture doesn't work CS3

Hello all,
i made my buttons in Photoshop CS3, imported them into Encore CS3.
When the button is active i want use as highlighted a image.
The menu works, also the highlighted function but it doesn't show the
image like in photoshop, it only shows a single-painted image (most grey).
Does anyone have a suggestion?

Herbert Posch,
Unfortunately, because of the DVD-spec., a Highlight is only a 2-bit color image from one of the Menu Highlight Color swatches. Now, you can create variations of multiple colors, but nothing approximating a continuous tone image.
You can "fool" the user, by creating a duplicate menu with the images in place of the normal Highlight. You'd have your Highlight on the original Menu transparent and the Button to Auto-Activate. You'll need a duplicate Menu for each Button though.
It takes a bit of work and it will help to have a navigational flowchart drawn out ahead of time, but the effect can look quite convincing. If you go this route, do a test burn to DVD RW, as you will likely get a black flash in Preview, that should not be on the burned DVD.
Good luck,
Hunt

Similar Messages

HT201365 I just updated to ios 7 on my iPhone 4 how do you turn the apps off when your not using them? The old way of double clicking and then pressing the app until a red minus button comes doesn't work it opens it back up!?

I just updated to ios 7 on my iPhone 4 how do you turn the apps off when your not using them? The old way of double clicking and then pressing the app until a red minus button comes doesn't work it opens it back up!?

Double click home button, then swipe up on app picture (not the icon itself)

Undo button indesign doesn't work

Hey guys,
I made a dossier in indesign (mac) for my design class and I worked over 24 hours on it.
Tomorrow, I have to hand it in, but then yesterday suddenly my SAVE, SAVE AS, and UNDO and REDO buttons didn't work anymore! So I let the laptop like it was and today I worked again on it,
but I accidentally deleated the wrong layer and now THE WHOLE DOSSIER IS DELEATED!
I can't undo it, because the button still doesn't work and I'm lucky that some hours ago, I exported the data as a PDF-file which thankfully worked, but there are still hours of hard work missing and now my project is not finished!
Can anyone help me? Please, I'm freaking out right now!!

No, you'll never get back any changes you made between the last save and the time the file was closed. If that was three hours work, that's unfortunate. My advice was simply a way for you to recover as much of your work as possible so you wouldn't need to start over from nothing.
Consider this as a good lesson in workflow habits. Save often, and I recommend doing a Save As with a new versioning name (I append a number) at each major change point where you are about to branchin a new direction. This gives you not only a set of backup files, but the ability to easily go back to a previous version and go in a new direction.
It's also good to develop the habit of hitting Cmd-Z (Ctrl-Z on Windows) for Undo immediately after you make a mistake, though it sounds like you actually tried to do this. File > Revert can be helpful too, if you've been saving right along.

S60 menu buttons lighting doesn't work

Hello all, On Lenovo S60, menu buttons lighting doesn't work. Is that normal and supposed to be like that, or it is some kind of bug?
Thanks!

S60 does not have backlit on the Recent, Home and Back button.
Thanks.

Could someone help me and telling me how I do a copy from one song. don't tell me press the button copy - doesn't work anymore!!!

could someone help me and telling me how I do a copy from one song. don't tell me press the button copy - doesn't work anymore!!!???

i made a "playlist" and did some aac-version, because i need the songs for different length of time. but some of this songs i need the same way (i teaching aqua gym lessons). and earlier i could made a copy and past and it worked. but now, nothing worked! everytime something is different.
sorry, actually i am not so good in english to explain my problems i prefere german.

I got problem with home button it doesn't work but the touch ID is working ( I have 5S)

I have the new iPhone 5S.
And the problem is the home button it doesn't work but the touch ID is working.
I don't think the button is broken.

Hey! I just read something about it on a post by iPhone 4S Stuck at boot showing [NAND] ? at the end of the second page..... It is a lot of work by it depends on you if you want to try.... at the end if not working as varjak paw quoted you may have to replace it...... but don't give up!!!!

Sharing pictures doesn't work anymore

I used to be able to snap a picture, see the picture, and then on that screen, hit the picture and hit the sharing button to message it to someone (or do other things with it).
Since the last two ios upgrades (6 and above), this feature doesn't work correctly.
Before:
1) Click home button
2) Launch camera using an upswipe on the camera
3) Take picture
4) Click on thumbnail in lower left corner
5) Click on picture that comes up
6) Select outgoing arrow on bottom
7) Select message and send pic
After:
1) Click home button
2) Launch camera using an upswipe on the camera
3) Take picture (btw, my iphone5 pics are *fuzzier* than iphone4!!)
4) Click on thumbnail in lower left corner
5) Click on picture that comes up
6) Try to select outgoing arrow on bottom, but doesn't show up
7) Click home button
-- Either --
8) Launch camera again from home page camera icon
9) Click on thumbnail on lower left corner of last picture taken
10) Select outgoing arrow on bottom that *now shows up the second time, but didn't show up the first time* [BUG]
11) Select message and send pic
-- OR --
8) Launch the photos gallery from the photos icon
9) Choose Camera roll from albums
10) Try to figure out which picture it was from the thumbnails
11) Select the picture thumbnail by clicking on it
12) On the image that comes up, click on it to bring up context menu
13) Select the outgoing arrow on bottom (the one that doesn't show up in the camera app view) [BUG]
14) Select message and send pic
The bottom line is, something I do several times a day, used to work great on pre-ios6 and iphone4, now really *****. I keep waiting for this to get fixed, but apparently it's not, so I wanted to document the process.

Hi,
It should work.
Sending any pic file format that Preview can open should be viable.
Check that you are using port 443 in iChat Menu > Preferences > Accounts > Server Settings rather than the default port of 5190
iChat by default logs in to the AIm servers on port 5190 ON TCP protocol
Pics in Chat are sent on port 5190 but on UDP Protocol
Some routers and modems do not like this dual use of the port and changing the Login port is a works around and the only port you an change.
Ralph

IPhone won't start.What to do if the home button also doesn't work anymore ?

Hallo,mein IPhone ist ausgegangen ohne dass ich es gemerkt habe und geht nun nicht mehr an und mein Akku war bis vor 10 min noch bei 60 %..ln anderen Beiträgen habe ich gelesen,dass man den Home-Button und den Ein/Ausschaltknopf gleichzeitig betätigen soll und dann sollte es wieder funktionieren,aber mein Problem ist nun,dass mein Home-Button sich ebenfalls seit 3 Wochen nicht mehr betätigen lässt..Was soll ich jetzt machen ?
Hey guys,my english isnt good but I will try it.So my Iphone will not start and I don't know what to do..my accu wasn't empty but nevertheless it turned off.
My home button doesn't work also..so what I have to do ?

iphone: hardware troubleshooting http://support.apple.com/kb/TS2802

Power button that doesn't work?

My power button is not working. I have tried to force reboot by holding down the power button and the circle button but its not working. Also, all of the sudden when I'm talking on the phone, all the buttons get triggered while I'm talking on the phone: like mute, facetime, hold.
Any ideas of what is going on? Thanks.

Mine did this the other day and it was a result of getting wet while I was running. I let it sit a while and air dry and it worked fine afterwards.

IPhone 5 power button sometimes doesn't work under iOS 7

Hi, my wife has noticed the problem which started to appear on her iPhone 5 after she has recently upgraded to IOS 7.0.2
Power button randomly doesn't respond to power off the phone but never to power it on. Does anyone has similar issue?

The issue could be a faulty power button. There's nothing, that I'm aware of, in iOS 7 that would cause inconsistent power button functionality.
Make sure you depress/hold the power button long enough to see the RED power off slider.

Satellite A300-24z - VAP - buttons illumination doesn't work properly

Sorry about my English.
I have notebook Satellite A300-24z, Model number PSAG8E and Vista 32 bit.
I try to setup this driver and keys up the numbers are not having light.
I try to do this 3 times and still is not working.
Can somebody help me?

To be honest I don't know what do you mean with format the windows with the folder of drivres by mistake.
Can you use these buttons? Do they work?
Do you have problem with illumination only?
Open Toshiba Assist (shortcut is on desktop) and go to optimize. I think there you can find option to start Toshiba hardware settings. if I am remembering well there is tab called illumination or so. Check if this option is enabled or disabled there.
Check also BIOS settings. In advanced option you can also find settings for ON/OFF illumination.

Button Event doesn't work after interactive pdf form creation

Hi everyone,
I have an interactive form created after clicking on a button in view 1. The interactive form ui element is then in a view 2, with a button "back" to return to view 1. The problem is that this button no longer works (it worked on 2004, i'm upgrading to 2004s).
By its behaviour, i can say it doesn't even go to the server anymore. I allready checked if the plug data was lost or the event onAction was empty, but in the dev studio eveything looks fine.
Does anyone has any ideas that could help ?
thank you in advance.

Hi,
Can you please let me know where I need to set the property to false for adobe as i am facing the same problem.
Thank you
With Regrds
Sunil

On/Off button light doesn't work.

Have a new W2071d monitor...turned the computer on this AM and everything turned on, but the on/off light on the monitor doesn't light up at all...Clicked the button a few times, but nothing....I do have the manual saved to my computer, but I couldn't find anything about it to solve the problem.......Anyone have any ideas?.....Thanks, Pipa
This question was solved.
View Solution.

OK!!! That's great that its working fine now.
If you have any future questions don't hesitate to ask.
Thank You
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

[SOLVED] Highlight Window effect doesn't work

Hello
I have KDE 4.4 installed and it's working really fine, with one exeption: The desktop effect "highlight window" is not working, no mater what I try (disabling all other effects, enabling just a few, disabling and reenabling compositing). Nothing helped!
The other "related" desktop effect, where you can maximize windows by dragging them to the borders of your screen, is working like a charm, also the preview of a window in the taskbar (if you hover over it with your mouse), all fine.
But not "highlight window"
Does somebody know what to do, where to look, what to try?
Thanks
n8schicht
EDIT: Never mind, I just realized I had to go to the task bar settings and enable "Highlight windows" there, too
Last edited by n8schicht (2010-02-11 09:06:09)

Go to 'System Settings' -> 'Application Appearance' -> 'Style' -> 'Fine Tuning' and change 'Menubar style' to 'Only export'. Just checked, works fine with qt applications.
I'm not sure about gtk apps, though. I recall reading somewhere that, in addition to installing appmenu-gtk and its dependencies, one needed to specify something in the .gtkrc and/or .config/gtk-3.0/settings.ini file(s). Well that or my memory might just be playing tricks on me.
EDIT:
If for some reason gtk apps refuse to export their menus, you might want to look at this webupd8 article. Good luck!
Last edited by andy_v (2013-06-22 12:36:50)

No "Submit to SAP" button, the submit button offered doesn't work

Hello everyone,
I am working with the interactive forms and I have tried going through the PDF about how to use an RFC with the interactive forms. During the tutorial, they say to add a button called "Submit to SAP", but I don't have one. I have groupings for Web Dynpro ActiveX and Web Dynpro Native, but neither of those have a "Submit to SAP" button, only regular submit buttons. I have tried adding these submit buttons, but neither one actually submits my data. When I click on them in the form nothing happens.
I am running NWDS 7.0.10
Thanks for the help,
Logan

We had the same problem and when we installed ACF on the client machine it resolved the problem.
If you are using 04s you can use this link https://sapmats-de.sap-ag.de/download/download.cgi?id=HUU1XMYWJNEKKEXB7EG33N5LBBAXUEP4LBRZXKWFEZHBR74SWY
to download ACF.
Also, does this problem exist even when the Submit button is placed outside the Adobe form?
thanks,
Sanketh

Highlighting button picture doesn't work CS3

Similar Messages

Maybe you are looking for