Highlighting for edit

I am breathing a sigh of relief that I was able to retreat to FFv3.57 after installing 4.
FF4 promised blinding speed, useful tabs and improvements. In reality those cosmetic changes did not compensate for the mess it made of page manipulation. For some pages it locked out the use of ctrl with or minus to change the font size which I find very important with a laptop screen. Even worse though, I constantly highlight text for copy and paste using either shift and the arrow keys or left click and the touch pad. When the highlight hits the screen top, bottom or sides and there is more info 'off screen' it automatically scrolls, or did. FF4 only scrolled up and just hit the wall for down or sideways requiring some non intuitive combinations of arrow and click work that easily broke the highlighting to pieces. No way I could live with that.
I tried FF5 beta to see if it fixed the problem but it didn't. I then got worried and cranky until luckily I found 3.57 saved in my download directory. Reinstalled that and joy, it all works as it should again. My advice is make sure you have a v3 copy to go back to before you try v4 on your machine.
Geoff.

In your own interests, you should update to v3.5.19 by clicking Help | Check For Updates.
The version you've reinstalled is vulnerable to attack in many ways and you risk system security by installing it. The most prevalent threat concerns a recent security breach at an SSL Provider called Comodo whereby a number of fraudulent certificates were released. These can be used to create any site like online banking and v3.5.7 will not warn you that the site is a fake. These certificates were blacklisted in 3.5.19, 3.6.16 and above and the current version.
For more info on the subject, see: http://blogs.comodo.com/it-security/data-security/the-recent-ra-compromise/

Similar Messages

I have updated to the new version of iPhoto but it will no longer let me edit text in the preset text boxes. The text is highlighted for a nanosecond but will not stay highlighted so I can amend it. Can anyone help me with this. Many thanks.

I have updated to the latest version of iPhoto. But now iPhoto will not let me amend the preset text in the text boxes.
the text is highlighted for a nano second but it will not stay highlighted so that I can add my own text.
can anyone help me with this issue.
Many thanks

You might try using the add-on 'NoSquint' which allows numerous zoom options specific to each page you visit & keeps your settings - https://addons.mozilla.org/en-US/firefox/addon/nosquint/
If you want to go back to 3.6x, you will find it here:
http://www.mozilla.com/en-US/firefox/all-older.html
In most cases you can simply "upgrade" (meaning downgrade) directly from the installation. It would be a good idea to save your passwords & bookmarks just to be on the safe side.

Pacman.conf file syntax highlighting for nano

Hi, here is pacman.conf file syntax highlighting for nano. It may be useful for those who edit their pacman.conf regularly.
Just put this lines in the end of your /etc/nanorc or ~/.nanorc file:
# syntax highlithing in pacman.conf
syntax "pacman.conf" "pacman\.conf$"
color brightwhite start="\[" end="\]"
color brightyellow ".*="
color brightred "=.*"
color white "="
color brightblue "\[|\]"
color brightcyan start="/|http|ftp" end=".*"
color green "#.*"
In this thread you can find rc.conf file syntax highlighting.

thank you! i always accidentally open up nano, find out text is practically unreadable with its default colours, close it and then wait the horrific 4 seconds it takes for emacs to spring to life.

Rc.conf file syntax highlighting for nano

Hey, here is rc.conf file syntax highlighting for nano. It may be useful for those who edit their rc.conf regularly.
# syntax highlithing in rc.conf
syntax "rc.conf" "rc\.conf$"
color brightwhite ""(\\.|[^\"])*""
color brightwhite "$(\\.|[^\"])*$"
color brightred "![^> ]+"
color brightcyan "@[^> ]+"
color brightyellow ".*="
color white "="
color brightblue ""|$|$"
color green "#.*"
Put this lines into /etc/nanorc or ~/.nanorc

thank you! i always accidentally open up nano, find out text is practically unreadable with its default colours, close it and then wait the horrific 4 seconds it takes for emacs to spring to life.

How do I enable syntax highlighting for jspf files on Dreamweaver CS6 on Windows?

I followed the instructions (which I modified for CS6) in this posting: http://blog.metameister.com/blog/2011/04/08/open-new-file-types-and-add-syntax-highlightin g-in-dreamweaver-cs5-on-window…
but it did not work for CS6.
How do I enable syntax highlighting for jspf files on Dreamweaver CS6 on Windows 7?
cheers
Marvin in Edmonton

Ok, I figured it out after hunting for a few hours.
Step 1. Add the File Type
In Dreamweaver’s toolbar:
Select Edit > Preferences;
under File Types / Editors, add .jspf to the line “Open in Code View:”.
Step 2. Extensions.txt
Add file type .jspf to the Extensions.txt files. There are two of these files:
C:\Users\[username]\AppData\Roaming\Adobe\Dreamweaver CS6\en_US\Configuration
C:\Program Files (x86)\Adobe\Adobe Dreamweaver CS6\configuration
Step 3. MMDocumentTypes.xml
Add jspf to the MMDocumentTypes.xml files. Open this file in Notepad or Text Editor. Do not modify the Dreamweaver configuration files within Dreamweaver.
There are three MMDocumentTypes.xml files to be modified:
C:\Program Files (x86)\Adobe\Adobe Dreamweaver CS6\configuration\DocumentTypes
C:\Users\mhaagsma\AppData\Roaming\Adobe\Dreamweaver CS6\en_US\Configuration
C:\Users\mhaagsma\AppData\Roaming\Adobe\Dreamweaver CS6\en_US\Configuration\DocumentTypes\
Step 4. Restart Dreamweaver
Hopefully the file type will now be recognized and appear with syntax highlighting.

"Insufficient content for edit" Error Message

In Premiere, when performing a three point edit, I would get a "Fit Clip" dialogue box that asked me if I wanted to "Ignore Source In Point", "Ignore Source Out Point", etc. I usually pick the same option so I checked off the box that said "Always use this choice". If an edit doesn't exactly fit the parameters I universally set, an error comes up saying, "insufficient content for edit".
I can't find a way to undo that without wiping my settings clean. Is there a way to bring that initial dialogue box back up? Thanks, all.

I figured it was a check box I was overlooking. Thanks!
For those who can't find it, here's a screen grab with the option highlighted.

Replace Edit yields an Insufficent Content For Edit Error - Sometimes.

Here's the scenerio- I have clips of student artwork (NTSC video, not jpgs.) Each clip is approx 20 seconds long. In the FCP timeline, I have a template set up - v1 is the artwork, v2 is a slate for the student's name. Audio is not used. There is a "Cube Spin" transition between all clips. Clips in the timeline are 8 seconds long. Everything looks good. Now I want an easy way to change out the clips in v1.
I load my new clip into the viewer that I'm going to use to replace the first clip in the timeline. In the viewer, I set an in point approx 2 seconds in. v1 is targeted. I move the playhead to the start of the clip to replace. Hitting F11 to Replace works just fine. I'll move to the next one, and do the same. This is where the problem happens. Now it won't replace it. Or maybe it will. It works sometimes, and not others. When it doesn't work, I'm greeted with the "insufficient content for edit" message. To make it work, I don't (think) I do anything differently, except maybe move my playhead to another spot on the clip, and then back again, or just leave it out in the middle of the clip.
I guess what I'm trying to say is that I can't find a pattern to why it won't work. At first I thought it was because I had a transition on the front or back of the clip, and it wouldn't replace that clip because of that. However, that's not the case because sometimes I can get it to work with transitions on both sides! I know there is enough pad on the video because the in point is 2 seconds in, the transition is only a total of 20 frames, the timeline clip is only 8 seconds, and my total source clip in the viewer is 20 seconds. I can't figure out what the pattern is and why I'm getting this error. If it doesn't work, sometimes I simply move the playhead around, and try again, and it works.
So.... Is this a bug or am I just missing something very simple?
Thanks for the help!
Specs
FCP 6.0
Power PC G5 (But it happens on our Intel machine as well)
Good ol Standard Def NTSC video.

I figured it was a check box I was overlooking. Thanks!
For those who can't find it, here's a screen grab with the option highlighted.

"Error 7 occurred at Invoke Node..." when attempting to open .vi for editing

I am attempting to open a vi for editing, and instead the vi is attempting to execute. I get the error:
"Error 7 occurred at Invoke Node in BuildTargetBuildSpecification.vi->BuildXFS.vi"
Possible reason(s): LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
Method Name: Project: Open
When I close the Error Message dialog, Labview terminates.

Hi R.Jay,
Error 7 generally occurs when trying to create an executable when there is an extra instance of a top-level vi. You may need to remove the file as a support file (but leave it as the top level vi).
Are you trying to run an executable that has already been created? Unless you have already built an executable, it should not automatically run when opened. Also, was it built in a previous version of LabVIEW? Sometimes this error can be seen when you upgrade to a newer version without compiling.
Regards,
Lauren
Applications Engineering
National Instruments

I want to use my Time Capsule as a central 'hub/hard-drive' in order to keep all my working files in one place. I then plan to use my laptops/desktops as peripheral devices for editing and creation of these files. Is it possible? Create a personal cloud?

I want to use my Time Capsule as a central 'hub/hard-drive' in order to keep all my working files in one place. I then plan to use my laptops/desktops as peripheral devices for editing and creation of these files. Is it possible? To create a personal cloud?
Can someone advise as to whether i can do the following:
                            Future Internet connection -------------------TIME CAPSULE (containing all files) -------------- Backed up on the WD 2T Hard-drive I have
                                  (not connected yet)                                         I                                                          (*connected to timecapsule physically)
                                                                                                        I
                I                                         I                                                I                                                              I                                                I
      Macbook Pro                             iMac                                       HP (PC)                                             OLD Macbook Pro                         iPhone
(used for remote working)       (Used for home working)     (used for heavy CAD and rendering)    (not being used for anything at the moment)        (& iPods)
I am looking to have all my files in one place as i am hopelessly disorganised. I know the online clouds are a good solution (used Dropbox at work and uni for 3 years) however i am wanting to create my own 'dropbox/icloud' at home. So whenever i get back home with my laptop, any work i have been working on whilst out that day is updated to the timecapsule, and then ultimately as i turn on the other devices, they update to those newer versions of the files. Please tell me that the 3TB time capsule i have can do this, otherwise it feels rather overpriced as a wireless storage device?
Another note (to those in the know) If i am to be working on large files (REVIT/SOLIDWORKS/KEYSHOT/CREO/AUTOCAD) - is the timecapsule connection good enough to support editing and updating these files?
I know i may be asking a question that many have before, but as a bit of a technical novice I wanted a clear-cut answer to my specific circumstances. Your help is greatly appreciated.
(*can i use this WD hard-drive that is connected to the Time Capsule as a back up? so that the time machine back-ups/any back ups are also backed up onto this one? can the WD be a backup for the TC?)
Kind Regards
Joe

The diagram was supposed to look more like this......
Internet ---------TIME CAPSULE(containing all files) --------WD 2T Harddrive
                                            I
     I                           I                          I                            I                                   I
Macbook Pro         iMac                 HP (PC)            OLD Macbook Pro           iPhone
Sorry!
Regards
Joe

Jsp,bc4j,Data web Bean , error : NO ROWS AVAILABLE FOR EDITING

HI
I'm developping a jsp application based on Bc4j. when trying to insert a new row with missing fields which must be not null,
in order to be able to edit the row and correct the non seized fields, I display the edit page and it works for several views. but this time when editing fields and submitting the edit form an error is raised with the message no rows available for editing.
the particularity for these views(which causes the error) is that are details for a view which is detail for an other.
can someone please suggest some solution for such a problem
thanks in advance
Ghassen
null

ghassen
this is a typicall error that occurs when trying to execute the Row data tag with action "Update" and there is not row obtained through the rowkeyparam (normally MyRowKey url parameter passed from the Edit page). I don4t have sufficient information to give you an exact solution.
I don4t understand all your escenario, you spoke about "Insert new row with missing values in required fields", but if you don4t specify a right value to that fields, the insert fail.
Then you display the Edit page to edit that just inserted row, to correct (specify?) the values of that fields. The error occurs in the EditSubmit page.
The EditSubmit page execute de Row data tag, according to the implementation of Rowtag, first recover the row reference (from rowkeyparam url parameter) and then, if that row reference is null, throws the "No rows available for editing" Runtime Exception. This means that the datasource used in your EditSubmit page not include that RowKey reference (obtained from Edit page as Url parameter).
HTH
Pepe

I am unable to click on a layer mask for editing. CS6 OS10.10

I have been working on a file and all of a sudden I am unable to click on a layer mask in order to edit that mask. I am still able to do the following things:
Create a new adjustment layer. When I do this a new mask is formed for that layer and automatically selected for editing. I can edit this mask. As soon as I click off of it I cannot go back to it.
I am able to shift-click and command-click on layer masks and get those options/selections.
I am able to drag an existing mask to a new adjustment layer.
Hide/unhide the mask-overlay
Pretty much everything but click ON the mask and have it selected for editing.
I have tried the following:
Closing and re-opening the file.
Restarting photoshop.
Restarting my computer.
Deleting/recreating the preferences files.
Any insight out there?

I discovered my problem by trying to paint on whatever I was selected on. It laid down the mask overlay. I thought about it and realized that I must have bumped the 'Q' key and put myself in Quick Mask mode.
So now this is here in case anyone else makes this mistake! :-)

I am trying to edit my website which was composed in iweb. I have my website saved on my hard drive. When I open iweb, I can't seem to load the website folder into iweb for editing purposes. Anyone know a quick solution to this?

I am trying to edit my website which, was composed on iweb about 2 years ago. I have the website stored on my hard drive. When I open iweb, I can't figure out how to load the website into iweb for editing purposes. Any help would be greatly appreciated! Thanks

You need to migrate to a modern, supported webpage development application and leave iWeb behind. It hasn't been supported for 2 years now and was behind the curve feature wise when it was dropped by Apple.
One app that many have migrated to because it is very similar to iWeb in the GUI and features is Everweb. It has a demo version that you can try. Text and photos from you current published site can be copied and pasted into Everweb to help the migration over.
There are other possible candidates. Just search the iWeb forum for "iWeb alternative" or "iWeb replacement" to get a list of topics discussing them.

F4 for Editable field in ALV, display Name but capture ID

Hi Friends,
I have a ALV for which i have defined a Structure, which is passed to Fieldcatlog.
I have defined a Search help - ZUSER_NAME which has following fields to display.
USERID - USR02-BNAME
FNAME
LNAME
FULLNAME
So my structure for fieldcatalog has User-id which is linked to this search help with Domain XUBNAME.
So in my report i made this User-Id as editable and F4 available, everything is working fine.
when user does a F4, its displaying Userid,Fname,Lname and complete name.upon selection and save i am capturing the id and storing in the ztable.
But now i have a requirement that when user selects a value from this search help on F4, i need to display Fullname but capture the User Id. How can i do that?
This is something similar to the one we have in BSP- key-value pair.
how to do this in ALV.
Appreciate if someone can guide me thru.
Thanks,
Simha
Edited by: Simha on Sep 6, 2008 2:24 PM

hai , this is example code for editing the F4 display .. check out this
REPORT zalv_editf4display.
*Type pools for alv
TYPE-POOLS : slis.
*structure for t582a tbale
TYPES : BEGIN OF ty_table,
        infty TYPE infty,
        pnnnn TYPE pnnnn_d,
        zrmkz TYPE dzrmkz,
        zeitb TYPE dzeitb,
        dname TYPE dianm,
         davo TYPE davo,
        davoe TYPE davoe,
        END OF ty_table.
*Structure for infotype text
TYPES : BEGIN OF ty_itext,
        infty TYPE infty,
        itext TYPE intxt,
        sprsl TYPE sprsl,
        END OF ty_itext.
*Structure for output display
TYPES : BEGIN OF ty_output,
        infty TYPE infty,
        itext TYPE intxt,
        pnnnn TYPE pnnnn_d,
        zrmkz TYPE dzrmkz,
        zeitb TYPE dzeitb,
        dname TYPE dianm,
        davo TYPE davo,
        davoe TYPE davoe,
       END OF ty_output.
*internal table and work area declarations
DATA : it_table TYPE STANDARD TABLE OF ty_table INITIAL SIZE 0,
       it_output TYPE STANDARD TABLE OF ty_output INITIAL SIZE 0,
       it_pbo TYPE STANDARD TABLE OF ty_output INITIAL SIZE 0,
       it_ittext TYPE STANDARD TABLE OF ty_itext INITIAL SIZE 0,
       wa_table TYPE ty_table,
       wa_output TYPE ty_output,
       wa_ittext TYPE ty_itext.
*Data declarations for dropdown lists for f4
DATA: it_dropdown TYPE lvc_t_drop,
      ty_dropdown TYPE lvc_s_drop,
*data declaration for refreshing of alv
      stable TYPE lvc_s_stbl.
*Global variable declaration
DATA: gstring TYPE c.
*Data declarations for ALV
DATA: c_ccont TYPE REF TO cl_gui_custom_container,         "Custom container object
      c_alvgd         TYPE REF TO cl_gui_alv_grid,         "ALV grid object
      it_fcat            TYPE lvc_t_fcat,                  "Field catalogue
      it_layout          TYPE lvc_s_layo.                  "Layout
*ok code declaration
DATA:
ok_code       TYPE ui_func.
*initialization event
INITIALIZATION.
*start of selection event
START-OF-SELECTION.
*select the infotypes maintained
SELECT infty
          pnnnn
          zrmkz
          zeitb
          dname
          davo
          davoe
          FROM t582a UP TO 10 ROWS
          INTO CORRESPONDING FIELDS OF TABLE it_table.
*Select the infotype texts
IF it_table[] IS NOT INITIAL.
    SELECT itext
             infty
             sprsl
             FROM t582s
             INTO CORRESPONDING FIELDS OF TABLE it_ittext
             FOR ALL ENTRIES IN it_table
             WHERE infty = it_table-infty
             AND sprsl = 'E'.
ENDIF.
*Apppending the data to the internal table of ALV output
LOOP AT it_table INTO wa_table.
    wa_output-infty = wa_table-infty.
    wa_output-pnnnn = wa_table-pnnnn.
    wa_output-zrmkz = wa_table-zrmkz.
    wa_output-zeitb = wa_table-zeitb.
    wa_output-dname = wa_table-dname.
    wa_output-davo = wa_table-davo.
    wa_output-davoe = wa_table-davoe.
For texts
    READ TABLE it_ittext INTO wa_ittext WITH KEY infty = wa_table-infty.
    wa_output-itext = wa_ittext-itext.
    APPEND wa_output TO it_output.
    CLEAR wa_output.
ENDLOOP.
Calling the ALV screen with custom container
CALL SCREEN 0600.
*On this statement double click it takes you to the screen painter SE51.
*Enter the attributes
*Create a Custom container and name it CCONT and OK code as OK_CODE.
*Save check and Activate the screen painter.
*Now a normal screen with number 600 is created which holds the ALV grid.
PBO of the actual screen ,
Here we can give a title and customized menus
*create 2 buttons with function code 'SAVE' and 'EXIT'.
GIVE A SUITABLE TITLE
*&      Module STATUS_0600 OUTPUT
      text
MODULE status_0600 OUTPUT.
SET PF-STATUS 'DISP'.
SET TITLEBAR 'ALVF4'.
ENDMODULE.                 " STATUS_0600 OUTPUT
calling the PBO module ALV_GRID.
*&      Module PBO OUTPUT
      text
MODULE pbo OUTPUT.
*Creating objects of the container
CREATE OBJECT c_ccont
       EXPORTING
          container_name = 'CCONT'.
create object for alv grid
create object c_alvgd
exporting
i_parent = c_ccont.
SET field for ALV
PERFORM alv_build_fieldcat.
Set ALV attributes FOR LAYOUT
PERFORM alv_report_layout.
CHECK NOT c_alvgd IS INITIAL.
Call ALV GRID
CALL METHOD c_alvgd->set_table_for_first_display
    EXPORTING
      is_layout                     = it_layout
      i_save                        = 'A'
    CHANGING
      it_outtab                     = it_output
      it_fieldcatalog               = it_fcat
    EXCEPTIONS
      invalid_parameter_combination = 1
      program_error                 = 2
      too_many_lines                = 3
      OTHERS                        = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDMODULE.                 " PBO OUTPUT
*&      Form alv_build_fieldcat
      text
     <--P_IT_FCAT text
*subroutine to build fieldcat
FORM alv_build_fieldcat.
DATA lv_fldcat TYPE lvc_s_fcat.
CLEAR lv_fldcat.
lv_fldcat-row_pos   = '1'.
lv_fldcat-col_pos   = '1'.
lv_fldcat-fieldname = 'INFTY'.
lv_fldcat-tabname   = 'IT_OUTPUT'.
lv_fldcat-outputlen = 8.
lv_fldcat-scrtext_m = 'Infotype'.
lv_fldcat-icon = 'X'.
APPEND lv_fldcat TO it_fcat.
CLEAR lv_fldcat.
lv_fldcat-row_pos   = '1'.
lv_fldcat-col_pos   = '2'.
lv_fldcat-fieldname = 'PNNNN'.
lv_fldcat-tabname   = 'IT_OUTPUT'.
lv_fldcat-outputlen = 15.
lv_fldcat-scrtext_m = 'Structure'.
lv_fldcat-icon = ''.
APPEND lv_fldcat TO it_fcat.
CLEAR lv_fldcat.
lv_fldcat-row_pos   = '1'.
lv_fldcat-col_pos   = '3'.
lv_fldcat-fieldname = 'ITEXT'.
lv_fldcat-tabname   = 'IT_OUTPUT'.
lv_fldcat-outputlen = 60.
lv_fldcat-scrtext_m = 'Description'.
lv_fldcat-icon = ''.
APPEND lv_fldcat TO it_fcat.
CLEAR lv_fldcat.
lv_fldcat-row_pos   = '1'.
lv_fldcat-col_pos   = '5'.
lv_fldcat-fieldname = 'ZRMKZ'.
lv_fldcat-tabname   = 'IT_OUTPUT'.
lv_fldcat-outputlen = 1.
lv_fldcat-scrtext_m = 'PERIOD'.
lv_fldcat-icon = ''.
APPEND lv_fldcat TO it_fcat.
CLEAR lv_fldcat.
lv_fldcat-row_pos   = '1'.
lv_fldcat-col_pos   = '6'.
lv_fldcat-fieldname = 'ZEITB'.
lv_fldcat-tabname   = 'IT_OUTPUT'.
lv_fldcat-outputlen = 5.
lv_fldcat-scrtext_m = 'Time constraint'.
lv_fldcat-edit = 'X'.
*To avail the existing F4 help these are to
*be given in the field catalogue
lv_fldcat-f4availabl = 'X'.
lv_fldcat-ref_table = 'T582A'.
lv_fldcat-ref_field = 'ZEITB'.
APPEND lv_fldcat TO it_fcat.
CLEAR lv_fldcat.
lv_fldcat-row_pos   = '1'.
lv_fldcat-col_pos   = '7'.
lv_fldcat-fieldname = 'DNAME'.
lv_fldcat-tabname   = 'IT_OUTPUT'.
lv_fldcat-outputlen = 15.
lv_fldcat-scrtext_m = 'Dialogmodule'.
lv_fldcat-icon = ''.
APPEND lv_fldcat TO it_fcat.
CLEAR lv_fldcat.
lv_fldcat-row_pos   = '1'.
lv_fldcat-col_pos   = '8'.
lv_fldcat-fieldname = 'DAVO'.
lv_fldcat-tabname   = 'IT_OUTPUT'.
lv_fldcat-outputlen = 15.
lv_fldcat-scrtext_m = 'Start'.
lv_fldcat-edit = 'X'.
APPEND lv_fldcat TO it_fcat.
CLEAR lv_fldcat.
lv_fldcat-row_pos   = '1'.
lv_fldcat-col_pos   = '9'.
lv_fldcat-fieldname = 'DAVOE'.
lv_fldcat-tabname   = 'IT_OUTPUT'.
lv_fldcat-outputlen = 15.
lv_fldcat-scrtext_m = 'End'.
lv_fldcat-icon = ''.
APPEND lv_fldcat TO it_fcat.
CLEAR lv_fldcat.
*To create drop down for the field 'DAVO'
with our own f4 help
ty_dropdown-handle = '1'.
ty_dropdown-value = ' '.
APPEND ty_dropdown TO it_dropdown.
ty_dropdown-handle = '1'.
ty_dropdown-value = '1'.
APPEND ty_dropdown TO it_dropdown.
ty_dropdown-handle = '1'.
ty_dropdown-value = '2'.
APPEND ty_dropdown TO it_dropdown.
ty_dropdown-handle = '1'.
ty_dropdown-value = '3'.
APPEND ty_dropdown TO it_dropdown.
CALL METHOD c_alvgd->set_drop_down_table
    EXPORTING
      it_drop_down = it_dropdown.
LOOP AT it_fcat INTO lv_fldcat.
    CASE lv_fldcat-fieldname.
To assign dropdown in the fieldcataogue
      WHEN 'DAVO'.
        lv_fldcat-drdn_hndl = '1'.
        lv_fldcat-outputlen = 15.
        MODIFY it_fcat FROM lv_fldcat.
    ENDCASE.
ENDLOOP.
ENDFORM.                    " alv_build_fieldcat
*&      Form alv_report_layout
      text
     <--P_IT_LAYOUT text
*Subroutine for setting alv layout
FORM alv_report_layout.
it_layout-cwidth_opt = 'X'.
it_layout-col_opt = 'X'.
it_layout-zebra = 'X'.
ENDFORM.                    " alv_report_layout
PAI module of the screen created. In case we use an interactive ALV or
*for additional functionalities we can create OK codes
*and based on the user command we can do the coding.
*&      Module PAI INPUT
      text
MODULE pai INPUT.
*To change the existing values and refresh the grid
*And only values in the dropdown or in the default
*F4 can be given , else no action takes place for the dropdown
*and error is thrown for the default F4 help and font changes to red
*and on still saving, value is not changed
c_alvgd->check_changed_data( ).
*Based on the user input
*When user clicks 'SAVE;
CASE ok_code.
    WHEN 'SAVE'.
*A pop up is called to confirm the saving of changed data
      CALL FUNCTION 'POPUP_TO_CONFIRM'
        EXPORTING
          titlebar       = 'SAVING DATA'
          text_question = 'Continue?'
          icon_button_1 = 'icon_booking_ok'
        IMPORTING
          answer         = gstring
        EXCEPTIONS
          text_not_found = 1
          OTHERS         = 2.
      IF sy-subrc NE 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
*When the User clicks 'YES'
      IF ( gstring = '1' ).
        MESSAGE 'Saved' TYPE 'S'.
*Now the changed data is stored in the it_pbo internal table
        it_pbo = it_output.
*Subroutine to display the ALV with changed data.
        PERFORM redisplay.
      ELSE.
*When user clicks NO or Cancel
        MESSAGE 'Not Saved' TYPE 'S'.
      ENDIF.
**When the user clicks the 'EXIT; he is out
    WHEN 'EXIT'.
      LEAVE PROGRAM.
ENDCASE.
CLEAR: ok_code.
ENDMODULE.                 " PAI INPUT
*&      Form REDISPLAY
      text
--> p1        text
<-- p2        text
FORM redisplay .
*Cells of the alv are made non editable after entering OK to save
CALL METHOD c_alvgd->set_ready_for_input
    EXPORTING
      i_ready_for_input = 0.
*Row and column of the alv are refreshed after changing values
stable-row = 'X'.
stable-col = 'X'.
*REfreshed ALV display with the changed values
*This ALV is non editable and contains new values
CALL METHOD c_alvgd->refresh_table_display
    EXPORTING
      is_stable = stable
    EXCEPTIONS
      finished = 1
      OTHERS    = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " REDISPLAY

Open file for edit

hi
lets say i am doing a program similiar to autocad
and i need to open the file for edit in my java program
the file format is my own custom format, not autocad format
my question is that does it more sense to create a clone of the copy to edit
or edit the opened file directly...

Create a clone. If something goes wrong, the user can always revert to the original file.
(On the other hand, this may also depend on what you are really doing to "edit the file". I suspect that very fiew user applications actually make changes directly into a source file.)

I imported some 24P HD videos from my DSLR to Aperture but these videos do not show up in iMovie '09 for editing purposes. Although my previous 24P HD Videos from iPhoto '09 show up. Why can't I access these videos stored in Aperture library?

I imported some 24P HD videos from my DSLR to Aperture but these videos do not show up in iMovie '09 for editing purposes. Although my previous 24P HD Videos from iPhoto '09 show up. Why can't I access these videos stored in Aperture library? I assumed that like the videos in iPhoto, I would be able to access the videos in Aperture through iMovie. Come on Apple! I am starting to get frustrated with your products here. And this is saying a lot when I have been using and loving apple products for the last 4 years.

Hi. My camera is a Canon 600D. And yes my videos are stored in the Aperture library and they are not referenced. Even then I tried to select all the videos in Aperture and clicked 'consolidate masters' and there was a messge that said all 'none of the files are referenced',... so they didn't need consolidating.
I also tried preferences> export> external video editor > choose > iMovie. And then right click on the video to edit with imovie. Even then the video didn't show up in iMovie. It seems like the only option for me is to import the videos directly to iMovie which means there will be two versions of the same file stored in my computer eating up space.
APPLE. What are you doing?

Highlighting for edit

Similar Messages

Maybe you are looking for