Highlighting in new version

After the update I can't highlight single words or partial sentences in a PDF file on my IPad, it will only highlight the entire sentence. Will It continue to be like this or will it be fixed?

Hi,
Thanks for reporting this issue. We would like to know the version number of the Adobe Reader you are using.
Could you please send the PDF file to us at [email protected] to help us investigate the issue?
Thanks,
Ankit

Similar Messages

Why is it, after I downloaded the new version of steve jobs, I lost all my highlighted placements in the book and whenever I tried to highlight something, it lags tremendously. Is there a reason for this?

Why is it, after I downloaded the new version of steve jobs, I lost all my highlighted placements in the book and whenever I tried to highlight something, it lags tremendously. Is there a reason for this?

And all placement in which I highlighted in previous version of the book, it directs me to a completely different page and sentence in which I highlighted previously. And the frustrating is, I can't delete the false highlight.

Problem with multiple XP accounts since installing new version of iTunes/QT

I am running XP Pro. A year or so ago, I went through the "disaster" recovery of installing the new version of iTunes (5.0) along with its nasty QT upgrade that was not ready for prime time. After much thrashing, I got my computer back to iTunes 4.9.0.xx and an older version of QT.
My son just bought a shuffle this week and so we thought it would now be safe to get the latest version of iTunes/QT on our machine. Boy, were we wrong.
We loaded, logged into my account, iTunes 6.0.4 and QT 7.1.0. iTunes comes up in my account and it recognizes my mini still.
However, iTunes will no longer run in my wife's account (she has a mini and has had it longer than my mini) and will not work in my son's account for his shuffle. It brings up the error dialog about QT not working.
My wife went to her account and just tried starting QT and it gave an error saying it was not installed properly.
I would have expected the installation in one account to work for all accounts given where it is installed.
Any help would be appreciated.

hiya!
even though you're not getting a #6344x in the affected accounts, this is still looking consistent with a registry permissions issue on the PC. (1402s have been known to be associated with the "stops working in all-but-one pre-existing account after an upgrade" issue before.)
the stejskal family pioneered the treatment for us:
the trick for me was getting up the nerve to "fiddle" with the registry...the reason why the girls could not get access to iTunes/QT was down to permission...once I got one going I went back in to HKEY-MACHINE\SOFTWARE\apple computer, inc\Quicktime...click to highlight go to edit, permission and added the missing girls to the list of who is allowed...made sure they have full permission..apply, ok and "bobs your uncle" all is now well in stejskal home.
http://discussions.apple.com/thread.jspa?messageID=810602&#810602
so check to see if those user accounts that are crashing for you have the right permissions on those keys.
keep us posted.
love, b

Aperture creating new version of image for each adjustment applied!

To anyone out there who can sort this one out, I will be forever grateful!
Here's the problem. I'll be jamming away in Aperture, adjusting photos like a madman. After adjusting a random number of photos (it usually varies between 5-30 photos or so after starting Aperture each time), the adjustments panel will no longer update when I click on a new image (i.e. it holds the info from the last image I adjusted and will continue to apply new adjustments to that last image even if another image is highlighted). If I switch to the metadata panel and then back to adjustments it will refresh itself and recognize the currently selected image (although I have to do this for EACH image I want to adjust once it starts acting up like this). The BIG problem is that even if I get the adjustments panel to recognize the selected image at this point, for EACH adjustment I apply it makes a new version of the image. For example, if I first change the contrast, it will make Version 2 of the image and select it (which is what it's supposed to do for the first adjustment, because I have "create new versions when making adjustments" checked in my preferences), but if I then make another adjustment like changing the saturation, it makes Version 3 of the image (from the master, so that only the saturation adjustment is applied and not the contrast adjustment). As you can imagine, this utterly destroys my once incredibly efficient Aperture workflow and makes it pretty much impossible to use Aperture for adjustments unless I turn off "create new versions when making adjustments" in the preferences, at which point it does seem to work again (although I've only tried it on a few images, so not 100% sure it will work properly even then). If I restart Aperture (or my computer), it will work normally again for a few pictures and then will start acting up again with the same problem.
Originally I was running into this problem on my PowerBook G4, and so I figured it was just because Aperture didn't like my wussy G4 processor and was acting up when the load got too heavy (after all, the adjustments would work fine for up to 30 images or so). However I recently purchased a sexy iMac 24" 2.8 GHz and maxed out the RAM to 4GB, but I'm still getting the same darned problem with Aperture on my iMac. Yes, I'm using the same library of photos I was using on my PowerBook G4.
This problem has been plaguing me for about 3 months now (everything else in Aperture works fine so I'm still using it to import and organize my photos, I just haven't been able to make adjustments on large groups of pictures for a while), and I've searched and searched these forums countless times to see if anyone has run into similar problems, but I've not seen a single mention of it. I've also tried EVERYTHING mentioned for similar problems (rebuilding library, vacuuming database, erasing com.apple.aperture.plist preference file, repairing permissions, reinstalling Aperture, making burnt offerings to Steve Jobs), and NOTHING is working. ARRGH!!
For those who might have some words of wisdom to offer this delighted-***-miserably frustrated Aperture user, here are a few more details about my setup:
I have a library of about 37,000 photos, the vast majority of them being RAW .CRW files from a Canon 10D. The 25GB library file is stored on my internal hard drive, and all photos are referenced from an external LaCie 500GB FireWire 400 hard drive. I have a LOT of export plug-ins installed in Aperture, but no image adjustment plugins. I have generated previews turned off for all projects. I've had the same problem on both my PowerBook G4 and new iMac 24" 2.8 GHz. One other thing worth mentioning is that instead of upgrading from 2.1 (which was already giving me this problem) to 2.1.2, I downloaded the full version of 2.1.2 and installed it. I noticed that my 2.1 Aperture.app file was less than 100MB, whereas the 2.1.2 Aperture.app file is over 300MB. Don't know if that's normal or not.
The only other thing I can think of to try at this point is to load a new library into Aperture and import a large group of pictures and make adjustments to them to potentially see if my problem is being caused by Aperture or by the library. Will probably try that tomorrow.
I would appreciate any advice or feedback anyone can offer about this nasty little problem, as it's giving me a serious hormonal imbalance.
THANKS!

Thanks for the reply RB, but my current workflow depends on me creating new versions when I make adjustments. I suppose as a temporary solution I will probably have to either turn this preference off or just be willing to constantly restart Aperture. At least I finally found another thread with the same problem, so finally I don't feel completely alone in the far reaches of the Aperture universe. For anyone who is interested, here is the link to that thread:
http://discussions.apple.com/thread.jspa?messageID=8555067
It appears this problem is closely related to the ubiquitous black viewer problem that seems to be plaguing far more users than my issue (although I've run into the black viewer problem a few times myself), as both problems force Aperture to output the following message to Console:
Main Thread Exception in Aperture: * -NSCFArray objectAtIndex:: index (1) beyond bounds (1)
It seems that both of these problems existed in Aperture 1 and 1.5 up until the 1.5.6 upgrade which seems to have fixed it, but then with Aperture 2 the problem seems to have returned. At least that's the gist of what I've been reading on a number of threads. Whatever the case, I hope Apple gets this sorted out in their next update!
As it appears there is no proper answer to this problem at the moment, I'm gonna go ahead and mark this thread answered (and since you were kind enough to at least take the time to reply RB, you can be credited with the answer... thanks!).

Copy/Paste difference in newer versions

Hello, I developed some problems with my Acrobat Standard 7.0 install when trying to update to 7.1 (it wasn't recognizing my CS2 install disk as the correct source disk it was requesting) so in the mean time I downloaded the latest version so I could access PDF files. I do a lot of copying and pasting from my professors' Powerpoint notes that have been coverted to PDF. In 7.0 I could select all the content, copy and paste into Word and the breaks between each slide did not copy over (which is what I want).
Now with the newer version the page breaks come along with the copied content, and I cannot figure out how to get rid of them. When I turn on display of formatting symbols in Word I see a small black square where these hard page breaks are, and nothing I do seems to make them go away short of pasting the content into a plain text editor then pasting into Word, but I lose all other formatting that way as well which isn't working for me either.
Should I just hunt around for a download of the 7.0 version of the free reader, or was this functionality related to having the full version?
Thanks!!

Hi Larry,
Thank you for your suggestion. If you can't tell already, I am far from an Illustrator power user...
I verified my clipboard settings looked as the attached image and it still did not seem to work. I also tried every combination of options and none of them worked either.
Work Flow: I will highlight the paths and copy them, then in the embroidery software when I hit paste, the mouse cursor turns into the processing icon for a split second like it's trying to paste, but nothing ever shows up in the embroidery software.
I reinstalled Illustrator CS4 alongside CS5 this morning, and tried the same copy/paste process with CS4 (from an illustrator file created in CS5)... works like a charm. I realize that downgrading to CS4 is not the solution. However, not being able to correctly operate the copy/paste commands is toying with my ego...

Since upgrading to new version 3, my symbols layers are invisible?

Since upgrading to new version of Adobe Edge animate 3, my symbols layers are invisible?
The animation was originated in version 2, which works fine still, yet when I open the file in version 3, the symbols layers are not showing up on the stage?
Any advice would be great as seems a shame to continue working in an older version.

Hi Jonty, and a warm welcome to the forums!
If I could see how to post a screenshot I would as this might help for you to see the problem.
Find a place to host the pic online, then Look at this post telling how to format (including adding graphics) posts for Apple Discussions...
http://discussions.apple.com/thread.jspa?messageID=607563
Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.

How to Redeploy a new version of a JAR Shared Library

Hello,
I have deployed successfully a JAR shared library with the following MANIFEST file
Extension-Name: myPackageSharedLibrary
Specification-Version: 1.0
Implementation-Version: 1.0
Now when I try to modify it and redeploy a newer version from the admin console, I get the following Exceptions
Message icon - Error Unable to access the selected application.
Message icon - Error Exception in AppMerge flows' progression
Message icon - Error Exception in AppMerge flows' progression
Message icon - Error [J2EE:160112]Error: The directory, 'C:\Oracle\Middleware\user_projects\domains\SharedLibraries_domain\servers\AdminServer\upload\myPackage.jar', does not contain a valid module. If the directory represents an ear file, it must contain a META-INF/application.xml file. If the directory represents an ejb-jar file, it must contain a META-INF/ejb-jar.xml file. If the directory represents a war file, it must contain a WEB-INF/web.xml file. Please ensure the source directory is a valid module and try again.
I get the following errors whether I deploy it with the same Implementation-Version or even with a newer higher version
To redeploy it, I have to delete the shared library and install it once again.
Any help? I'm using WLP 10.3.2
Thanks,

You need to wrap your JAR file within a WAR containing the MANIFEST highlighting the version of the library and the JAR file, you might also need a weblogic.xml file use the default one the jdev creates:
LIBRARY.WAR
|--META-INF
|--|---MANIFEST.MF
|--WEB-INF
|--|--weblogic.xml
|--|--lib
|----|--LIBRARY.JAR

Can't connect to the new version of appworld 1.1

8330 will not connect to the new version of appworld. It is telling me to check my network connections and try again. Network connections seem to be fine... any suggestions?

Hi and welcome to the forums!
Go to options, advanced options, applications, scroll to Blackberry App World.
Highlight it (don't click on it), menu key, select edit permissions.
Expand every option and make sure that all are set to allow.
Go to the browser, select options, cache operations, and clear all categories.
Do a battery pull as listed.
Are you on a company server based Blackberry or is this your personal phone?
Go to options, about what version of OS are you running. (4.x.x.xxx format)
Thanks,
Bifocals
No data will be lost when doing the following: pull the battery while the device is ON.
Replace after a minute, Let the device reboot 1-3 min, see if the problem is fixed.
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Bogus "New Version" message

I've created quite a few iBooks (including web and video widgets, etc) and I haven't seen this message before.
iTunes, iOS and iBooks apps updated and current. iPad 3. No issues.
This iBook has 40 pages of product photos so it should take around 15 - 20 seconds to sync to the iPad.
When I first exported it, it uploaded properly to the iPad and worked properly. I then went back and added some text and reexported it, trashed the copy in iTunes and dragged in the new version.
This time, the sync only took about 2 seconds. The iBook popped in the iBooks library on the iPad but it only took about two seconds to sync and the revised iBook did not show a progress bar or a blue "new" ribbon. The iBook weighs in at 19.2 MB. For some reason the content is not being uploaded.
When I opened it, I received this message:
"Neww Version Available
You won't be able to add notes,
highlights or bookmarks until you
update this book."
I get this message no matter what I do and it is obvious that the content is not uploading.
I've tried everything I could think of, including rebooting the iPad, syncing it various ways, etc (all books / selected books, etc). I also did a complete restore and the iBook still behaves the same.
Any ideas?
Thanks!

Thanks for the suggestion.
I deleted the iBook from both the iPad and iTunes, then emailed the original file, opened the email on the iPad and brought the file into the iBooks app.
Same problem as before. Obviously, there is some flag in the file that is causing it to display the bogus "new version available" message and not to display the "new" ribbon on the iBooks library icon. The content of the iBook itself is as it should be.

How can I see the URL for a page opened in the new version of safari?

Sometimes I like to copy the URL for an article I find on the web. The new version of Safari doesn't seem to show the URL. How can I see it?

Just click inside the url address bar. Full url address highlighted, will appear.
Best.

Getting used to the new version of Dreamweaver

1) I just downloaded a new version of Dreamweaver and can't find neither the fonts nor the font colors. 2) How to I create drop down menus?

1. The html attributes for these are gone since they've been deprecated within html standards. Highlight the text you want to affect, then click the CSS button in the Properties Inspector. You can control most of the usual text properties there, additional properties can be changed in the CSS Designer.
This is correct, but beware of using the Property inspector to style your text. Instead, you should always create a CSS rule to style the text, and apply that rule (if necessary) to the container of the text.
WHAT YOU GET IF YOU USE THE PROPERTY INSPECTOR (assuming text in a paragraph tag)
some styled text
WHAT YOU MIGHT GET IF YOU DO THIS SEVERAL TIMES TO THE SAME BIT OF TEXT
some styled text
WHAT YOU GET IF YOU CREATE THE RULE FIRST (assuming text in a paragraph tag)
some styled text
The downside of using the PI to do this is that each time you do it, a NEW class is created, so over time, your page fills up with these "ad hoc" and indecipherable class rules (2 days from now will you remember the difference between .style232 and .style233?).
The benefit of using the 2nd approach is that the downside mentioned above DOESN'T happen, you can name your classes with something that describes their function, you can apply the rule more intelligently that merely wrapping the styled content in a span tag (which may be totally redundant) and class rules can be reused many times on the same page.
As you can see, using the Property inspector to style your text is a bad idea, and frankly, that function has not been thought out very well in Dreamweaver.
Just saying....

When I was updating I Phone version 4 from iTunes. it got stuck in middle of updating, after uninstall the version 3 and new version 4 was not installed. Now iTunes is not detecting the iphone and my iphone is also not working n showing connection cable

When i was updating i phone version 4 from Itunes. It got stuck in middle of updating, after uninstall the version3. But new version was not installed. Now itunes is not detecting the iphone and iphone is also not working and showing connection cable with itunes. Pls help..

Check your system for possible Malware. But you have to do it in WIndows Safe Mode.
(Do not use your own Anti-virus to SCAN)
Start your computer in "Safe mode with networking", go to this link download a free version of Malwarebyte.
http://www.malwarebytes.org/products/malwarebytes_free
Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
To start your computer in safe mode
Press and hold the F8 key as your computer starts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter. Log on to your computer with a user account that has administrator rights.
When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally.

How do you remove the artwork from being visible in the new version of itunes?

How do you remove the artwork from being visible in the new version of itunes?

Easy peasy!
1. Highlight all the songs you want to remove the artwork from.
2. Pull down File > Get Info (Apple+I on the keyboard)
3. Click the checkbox next to the "artwork" panel.
4. Click OK and the artwork will be removes.
For individual tracks:
1. Hightlight the track.
2. Get Info.
3. Click the Artwork tab.
4. Click the artwork, click Delete, click OK.

IOS new version ipa file is not showing updates in afaria

Hi,
I am using Afaria 7 SP 4,
I have updated my application policy with a new version ipa file,
While applying the policies to device, there is no message shown for the updates in afaria application.
on taking the iOS build the build number is incremented to next version.
could anyone help highlight on what could be the issue?
Regards,
Saravanan.R

Well, first of all, I'm on OS X, not XP, so the control panel doesn't help me :\
as for the automatic update, I like it for all the security updates etc. etc. that come down the pipeline that I don't read about.
Thanks for your attempted help though

Pop up box: New Version Available when opening iBook

When I open an Ibook I created in iauthor I get a pop up "New Version Available" You won't be able to add notes, highlights or bookmarks until you update this book.
All my updates are up to date. Can anyone please help me with this?

Seen this recent similar thread?
New Version Available - Pop-Over

Highlighting in new version

Similar Messages

Maybe you are looking for