HighwayVIEW Version 4.2.2 & Allen Bradley PLC-2

Does anyone have any experience with this software? I am trying to make the transition from Lookout Protocol drivers (AB PLC-2 object) to using Highway VIEW Version 4.2.2. I have over 1800 tags. (I think I can do most of this using excel with the tags I exported from the Tag configuration editor)
Roy L. Costa
Email: [email protected]
Catalyst Test Engineer
General Motors Warren Tech Center (R & D)

Hi Roy,
This is not an answer to your query, but wanted to check with you how your experience with Highway View was assuming you made the transition.
Thanks,
Khalid

Similar Messages

Interface of Allen Bradley PLC with LabVIEW using TCP\IP modbus protocol

Hello.....
I want to connect a Allen Bradley PLC with LabVIEW using TCP\IP modbus protocol.
The PLC which I am using is a series of 1766BWA (Allen Bradley) please can you help me for the same or please give me suggestion.
Also I want to know the resistance values of this PLC.
Thank you.

Hello
I was trying for connection of a Allen Bradley PLC with LabVIEW using TCP\IP modbus protocol.
Here I am attaching the snapshot of PLC interfacing and communication vi using modbus but it is not working
For reading we use setting shown in CHANNEL 1-modbus but it gives error regarding modbus addressing
and for writing it shows error illegal address please help me for the same.
Thank you.
Attachments:
PLC_SCREEN.zip ‏261 KB
Modbus_(Read-Write).zip ‏14 KB

Serial Communications with Allen Bradley PLC 2.30

Does any one know the required pin outs for the serial cable from the PC com port to the Allen Bradley 1771-KG card or directly to the Allen Bradley processor? Any samples on writing TAGs to the registers?
Roy L. Costa
Email: [email protected]
Catalyst Test Engineer
General Motors Warren Tech Center (R & D)

Hello Chad
Thanks for the pin out information. I tried that pin out configuration Monday and it did not work. I am pasting a copy of a communication with Allen Bradley in this comment box as well as a communication with another programmer that commented in here as well. Please read it and let me know what you think. Thanks again Chad.
Roy
Everything works well, from the LPD OPC Server to creating TAGS..to using the HMI wizard on the front panel,...but there is no communication with my hardware. An NI Application Engineer came by yesterday and we concluded that this was a hardware ware communication problem. I talked with an Automation Engineer in Austin yesterday and he told me to try RSLinx and see if I could get it to communicate with the hardware. I like that HMI wizard, it is pretty cool! I am pasting a copy of an email I sent to Allen Bradley so you can see a little bit more information about my hardware. thanks for your help again Khalid.
{{{I am having much difficulty in communicating to my PLC 2 communication port or through my RS-232 port on my 1771-KG card. I am using a serial (null modem) cable on com port 1 on my PC. I have Win98 operating system. I am using LabView Datalogging and Supervisory control (Lookout) software to create several HMI?s. Can you please give me the pinouts that I need to communicate with the processor port on the PLC and or the 1771-KG card? Please contact me as soon as possible for I really need to get this to communicate so I can get started on this HMI upgrade. We are using PanelMates as HMI?s, but they are 13 years old and are failing frequently as well as being obsolete. At the present time I am creating new HMI?s but we are planning to do one fuel processing line at a time and replacing the PLC 2.3 with PLC-5 and then we can use the Ethernet module. Please call me at 313-972-4635 I do not have my own email at work so you will need to email any communications to my supervisor Fred Jacobsen he then will pass it on to me. Email: [email protected] If you have something you can fax me, here is the fax number: 313-871-2835
Roy L. Costa
Email: [email protected]
Catalyst Test Engineer
General Motors Warren Tech Center (R & D)

Is there a problem with Allen Bradley PLC and web server export options

It says this object will not run in a client version. I have a development version and a client version. Maybe I'm not understanding the error message. Lookout 5.0

The process you upload to a web server needs to be a poor client process. It means you have to create a client process without the PLC driver and a server process with the PLC driver. You will just upload the client process and the server process will stay on the Lookout Server machine.
There are several links on the support site those explain the prefered client-server architecture to choose for a Lookout application.
Building a Sample Server-Client System in Lookout
Converting a Lookout Server Process Into a Client
://ae.natinst.com/operations/ae/public.nsf/fca7838c4500dc10862567a100753500/4c13547ceb6354a886256b80...
Hope this is a good starting point for your Lookout application design.
Roland

Password 1395 Allen Bradley HELP PLEASE !!!

Please help, I have a machine down, and believe it or not, I actually have a spare Allen Bradley 1395 Digital DC drive complete working spare 200hp drive, but someone put a password in it, and I need to get around it or reset it so I can reconfigure my settings and communication. The password can be something like 1 to 56335, it would take years to guess it. I contacted AB by phone, but despite the fact that I have a quantity of two of their $26,000.00 drives, they want a $500 purchase order to have a tech give me the back door password. Someone must surely know how to do this. I have a DHT (1300) programming module connected to it, and I can view all of the parameters in monitor mode, but I NEED the password to do some parameter adjustments post haste. [email protected]

Hello
I was trying for connection of a Allen Bradley PLC with LabVIEW using TCP\IP modbus protocol.
Here I am attaching the snapshot of PLC interfacing and communication vi using modbus but it is not working
For reading we use setting shown in CHANNEL 1-modbus but it gives error regarding modbus addressing
and for writing it shows error illegal address please help me for the same.
Thank you.
Attachments:
PLC_SCREEN.zip ‏261 KB
Modbus_(Read-Write).zip ‏14 KB

Lookout 5.1 comm error Allen Bradley 1784-PKTX

I have and Allen Bradley network on a 1784-PKTX card. When I configure an object to use this card I only get the ISA version 1784-KTX model. Is there new drivers available and what are the recommended ways of using this particular PKTX card with Outlook 5.1. I appreciate any and all answers to this post

Have a look at this KB. It seems that Lookout doesn't support 1784-PKTX card.
http://digital.ni.com/public.nsf/websearch/7F5D5E27A43B04F286256ACD00779830?OpenDocument
One possible way is to use some other OPC Servers, and run Lookout as OPC Client.
Message Edited by Ryan.S on 05-10-2007 02:58 AM
Ryan Shi
National Instruments

Map Allen Bradley 1400 addresses to NI Modbus addresses

Hi,
How do I map Allen Bradley 1400 Micrologix addresses like (N7:0, B3:0/1, etc., etc.) to NIs modbus addresses? Can the NI DSC module access the PLC for read/write operations without using the NI OPC server?
Is there any tutorial or URL which specifically addresses the above queries?
Thanks in advance.

It's easier if you are using OPC ... you can map and bridge data between the two protocols quickly through tags (addresses).
Here is what you need:
Modbus << OPC Data Manager >> Allen Bradley
Data Manager allows one-to-one, one-to-many, and many to many relationships between tags
Let me know if you have any questions.
Wassim Daoud
Senior OPC Architect

Allen bradley l35e plc interface to Honeywell EBI

To All,
I'm trying to interface an Allen Bradley L35E PLC with Honeywell's EBI system. I'm hoping someone out there has accomplished this successfully.
Kind Regards,
SDMAC

AB PLC talks with EtherNet\IP on Ethernet Networks..
PLC5, MLX Series PLC uses DF1 Protocol for Serial RS232 Communication.
Lower End AB PLC's/Net-ENI Modules uses DF1 Protocol encapsulated with EtherNet\IP CIP Services for cummunication.
Latest AB PLCs uses EtherNet\IP(Pure CIP Services) for communication. Check, http:\\www.odva.org for more details into these protocols. With NI-OPC Servers, Lower End AB PLCs such as MLX Series, PLC5 Series can be integrated with LabVIEW. however., NI OPC Server doesnot supports Control Logix and Compact Logix PLCs.
If you are looking for some low cost solution to integrate All kind of AB PLCs with LabVIEW Software, Check this link, http://forums.lavag.org/Industrial-EtherNet-EtherNet-IP-t9041.html&p=35563#entry35563
Best regards
Siva
[email protected]

Lookout drivers for Allen Bradley

Is there a driver I can Use for The Allen Bradley CompactLogix L32E Ethernet communication

I am currently facing the same issue. I think you need to map the address to PLC5 or SLC 500 and then I believe you can use AB ethernet driver.
I will not be tackling mine for another month or two but is on my upcoming project list.

Allen Bradley KF-2 half duplex question

Has anyone used an Allen Bradley KF-2 DH+ communication interface with Lookout? The KF-2 connects to the SLC5/04 DH+ port and converts the DH+ to DF-1. My proccess can see the SLC5/04 in half duplex mode when I connect direct to the DF-1 port. When I try to connect through the KF-2 (set up for DF-1 half duplex), I get the Error "STS error 10: Illegal command or format" message. I know the KF-2 is set up OK, I can talk to the SLC5/04 with RS Logix in half duplex.

Hi,How to set my link up in solaris 10 ?
I dont know want happend to my machine solaris v440 it suddenly disconnected from n/w and finally i came to know that is a problem with NIC card..i din't find any light's glowing back side of the machine at NIC card.
can any one help me in this pls how can i proceed furture for getting my NIC back?
and i have excuted few commands
#ndd -set /dev/ce instance 0
#ndd -set /dev/ce adv_1000fdx_cap 1
#ndd -set /dev/ce adv_autoneg_cap 0
I have got dladm show-dev is
ce0 link: unknown speed: 1000 Mbps duplex: full
ce1 link: unknown speed: 0 Mbps duplex: unknown
I dont understand that why my link is showing still unknown ...any help..

Allen-Bradley Powerflex Control Code

Hi All,
I am using an Allen-Bradley PowerFlex 4 Adjustable Frequency AC Drive. I am communicating via the AB PowerFlex USB Converter, 1203-USB. Does anyone out there have any control code written for this?
It should be pretty simple serial communcations via a VISA connection, but I cannot find the comm protocol anywhere.
Any guidance woud be greatly appreciated.
Cheers,
FB

In this article you will find information concerning communication between the wing and the hyper drive through the converter 1203USB Rockwell
http://literature.rockwellautomation.com/idc/groups/literature/documents/um/drives-um001_-en-p.pdf

Drivers 1784PKTX allen bradley

Hello,
I have a card Allen Bradley PCI Family 1784-PKTX which the computer me does not want it to recognize, as if it needed drivers. Where with himself drivers or since I do so that the PC recognizes the card to me. Thank you very much to that it can help me
Tengo una tarjeta Allen Bradley PCI Family 1784-PKTX la cual el computador no me la quiere reconocer, como si necesitara de unos drivers.
Donde consigo los drivers o como hago para que el PC me reconozca la tarjeta.
Muchas gracias al que me pueda ayudar

If your computer doesn't recognize the card, you'd better ask AB for help.
By the way, Lookout currently doesn't support PCI 1784-PKTX card, because AB doesn't release its API.
Ryan Shi
National Instruments

Coneccion PLC controllogix allen bradley rslinx con labview

tengo un plc allen bradley controllogix que configuro la comunicacion con rsview a traves de rslinx pero quiero hacer un panel de similares caracteristicas con labview 8.5 que tengo el opc server, lo que no se es la configuracion de ambos, es decir rslinx y labview para que se comuniquen y hacer en el panel frontal algo bueno. quiero poner aprueba labview.
espero que me puedan ayudar con comentarios, link, etc.
cualquier ayuda lo agradecere

Buenos días!
Este link puede ayudar a usted:
http://zone.ni.com/devzone/cda/tut/p/id/4626
Saludos,
Wagner Marinho

Comunicacion lookout con plc slc 500 allen bradley

Actualmente tengo un plc allen bradley slc 500 y quiero conectarlo a traves del lookout a traves de los drivers que tiene el mismo lookout
object -- drivers -- driver slc500 pero me sale un error de comunicacion, anteriormente ya pude conectarlo a traves del keepserver y tambien a traves del mismo rslink con la opcion de new topic DDE sin ningun problema, pero quisiera saber como hacer para conectarlo a traves de los drivers q tiene el propio lookout.
utilizo lookout 6.0 - 6.2
rslink classic gateway
De ante mano agradezco cualquier ayuda
FIRA

thanks for answer me soon
First I use the DF1 to conect with the PLC I see that lookout has driver to SLC500 and It can comunicate with lookout without some OPC server like keepserver or NIServerOPC i would like to conect the PLC direct to loookout with the SLC500 drivers.
I can comunicate the lookout with keeperserver and also with NIserverOPC but i don´t want to spend more many in order to buy the OPC servers
also I can comunicate lookout with SLC 500 with the DDE topic that has RSLINK but now i want to know how can i do to comunicate lookout to SLC500 with the SCL drives that has lookout.,
The problem is:
when i made that comunicate with the SLC drivers from lookout I had comunication error and i don´t know why?
I use SLC 500,
RSLINk classic.
lookout 6.0 and 6.2
FIRA

RT webservice on allen-bradley panelview HMI?

Hello,
anywhere I can find the requirement for the browser that will be used to display wedsites from a RT target?
I've made a simple VI, just some controls and indicators, and I can easily see it IE (even with silverlight disabled) - but the HMI only shows the title, and then an empty picturebox where the VI was expected to be.
I actually just want to show a picture on the webpage, nothing more - any ideas?
Henrik
Solved!
Go to Solution.

Hi Henrik.
You also need to install the LabVIEW Run-Time enginer in order to get Remote Front Panel to work. After this installation, you should be able to use Internet Explore. I have also tried using Firefox, and that seemed to work just fine.
How Can I Display a Remote Front Panel on my Host Computer?
I don't know the HMIs that Allen-bradley is making, but according to this link
http://www.ab.com/en/epub/catalogs/12762/2181376/1239781/1670480/10791114/12293528/Introduction.html
it seems they are running on Windows 6.0 CE with limited functionality.
I would recommand a newer OS, like WES7 that are supported by NI.
http://sine.ni.com/nips/cds/view/p/lang/da/nid/209369
Another idea is to use Data Dashboard. With this, you can publish data over LAN, and connect an iPad that they are able to show the data, and even give new inputs to your LabVIEW aplication.
Getting Started with the Data Dashboard for LabVIEW
Best Regards
Alex E. Petersen
Certified LabVIEW Developer (CLD)
Application Engineer
Image House PantoInspect

HighwayVIE​W Version 4.2.2 & Allen Bradley PLC-2

Similar Messages

Maybe you are looking for

HighwayVIEW Version 4.2.2 & Allen Bradley PLC-2