Hiiiiiiiiii

i need to downgrade m iphone 4 32gb back to ios 6.1.2, i need to downgrade m iphone 4 32gb back to ios 6.1.2 plzzz help me out in dis plzzzz

hussain007 wrote:
hey am sorry i have wrote in a short way....
sir i have a iphone 4 32gb whch was working very good when i had ios6.1.2 but wen i upgraded it to ios7.0.2 n i got a problem that it was turning off in a running mode when i get a call and later when i got another update of ios7.0.3 it was working perfect but just for 2 days after that am able to face the same problem again so i request u to please find some helpful solution and fix my fonr back to as it was when i purchased itt.......
Better, but not much.
1. You cannot go back to an older iOS.  You can only upgrade, not downgrade.
2. I recommend the basic troubleshooting steps, as follows.
- Restart the device. http://support.apple.com/kb/ht1430
- Reset the device. (Same article as above.)
- Reset All Settings (Settings > General > Reset > Reset All Settings)
- Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
- Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.

Similar Messages

  • Hiiiiiiiiiii friends

    am  practicing ideas system in sap sd ....... am trying to creat customer at t c xd01 &vd01 the system throws an error in abap run time error the customer master data is locked how to unlock....pls help me thanks

    Hi,
    Go into Device Manager (rt click Computer ==> Device Manager, OR, Start ==> Run ==> type 'devmgmt.msc'), then look for something like "Sound, Video, etc.", and click on that to open it up.
    Do you see anything there?
    If you see  something like "Realtek High Definition Audio", double-click on it.  What does it show for "Device Status"?
    Jim

  • How to print the text in only last but one page in sapscripts

    hiiiiiiiiiii,
             explian how to print the text in only last but one page in sapscripts? wher to write the code? plz if possible explain in detail with an example?

    Hello,
    The total no pages is given by &SAPSCRIPT-FORMPAGES& command.
    So u can handle the situation in ur form like this
    /: if &PAGE&  = &SAPSCRIPT-FORMPAGES&
    p1 TEXT
    /: endif
    Try in this way it may help u.
    Regards

  • Tables name for Customer Payment Report

    hiiiiiiiiii
    can anyone tell us the tables name for the report customer payment receive..?
    Thanks & Regards
    Rekha sharma

    Hi Rekha
    when you pass following entry
    Bank dr  
    to Customer
    All header data like co code currecy ref , period etc goes to BKPF,
    line item - Bank Dr ( its a GL  entry ) goes to BSIS
    line item- Customer Cr ( its a AR entry ) goes to BSID or BSAD depends it is cleared or still open
    Also both the line items goes to BSEG
    Hope this helps.
    Regds
    Rajiv

  • Help to show a HTML file in Swing

    Hiiiiiiiiiii,
    During my development Me in a problem . Please help me out.
    As per my current context of the project I have to develop a HTML page with Help of CSS and all other things. After that I have to Show the HTML file through Swing. I know how to attach a file with help of URL but need some help to show a HTML file in Swing.
    *help to show a HTML file in Swing*

    As camickr said Javascript support is not available. If you want to support you have to write code for that. Up to an extent CSS support is provided.
    Sample code to display HTML pages in JTexPane (you can use JEditorPane as well):
    Construct the URL:
    URL url = YourClass.class.getResource("resources/Hello.html");
    // If YourClass is in package test.html, then your html page must be available in .....test/html/resources directory.
    // And your CSS files must be accessible from your HTML page. This you can test by simply opening the html
    // page in your favorite browser.And then call setPage() method of HelpDataPane. Note that, HelpDataPane supports hyperlink activation.
    import java.io.IOException;
    import java.net.URL;
    import javax.swing.JTextPane;
    import javax.swing.event.HyperlinkEvent;
    import javax.swing.event.HyperlinkListener;
    * A pane to display help pages. Help pages are accessed as URL and displayed
    * in this pane.
    * @author Mrityunjoy Saha
    * @version 1.0
    public class HelpDataPane extends JTextPane {
         * Creates a new instance of {@code HelpDataPane}.
        public HelpDataPane() {
            super();
            this.addHyperlinkListener(new HyperlinkListener() {
                public void hyperlinkUpdate(HyperlinkEvent e) {
                    if (e.getEventType().equals(HyperlinkEvent.EventType.ACTIVATED)) {
                        setPage(e.getURL());
         * Sets the current URL being displayed.  The content type of the
         * pane is set, and if the editor kit for the pane is
         * non-{@code null}, then
         * a new default document is created and the URL is read into it.
         * @param page The URL to be displayed.
        @Override
        public void setPage(URL page) {
            try {
                super.setPage(page);
            } catch (IOException ex) {
                try {
                    URL blankURL = YourClass.class.getResource("resources/Blank.html");
                    super.setPage(blankURL);
                } catch (IOException ioe) {
                    ioe.printStackTrace();
    }Thanks,
    Mrityunjoy

  • Purchase requisition flow

    hiiiiiiiiii
    i m new in company as a Abapr.
    i want to know proper flow of purchase requisition and step by step procedure for making them.
    its urgent
    thanks.

    tcode me51n
    give material
    give plant
    give quanity
    give purchase group
    give purchase org
    give requester
    if u want u can asign the source of supply auto. or maually by marking the check box of source determination
    to create pr u need to have
    vendor master data ,material master data

  • RFQ Problem

    Hiiiiiiiiiii Experts,
    I need your help.I am making enquiry through me41 for say 4 materials.After receiving quotation I am maintaing the price in each RFQ through me47.
    Then I am trying to compare these RFQ's collectively through me49.
    The problem is that it is showng the comprative price of all the materials.
    Now if I am doing the same process for single material the above transaction is working properly.It is showing problem(i.e ME49 is not showinh the comprative price of all material in each RFQ) only when RFQ is for more than one material.
    I am getting this error.
    Selected quotations not directly comparable
        Message no. 06616
    For those materials whose price are not getting compared it is saying that
    Quotation item not yet maintained in exception log.
    Please guide me .
    Brijesh

    Hey,
    Please check following example
    Material is 'A' where base init of measure is g (gram) and Order Unit is 'Tonn'
    Now in quotation I maintained price as 20 $/tonn for sp vendor
    and system calc price per g as base unit
    Here as this price is tends to zero ( 20 $/tonn = 0.000002 $/gram) this error may occur check if this is happening with your case
    Regs,
    Appie

  • Batch Compilation Problem(Migration)

    Hiiiiiiiiiii Gurus..
    I am on Migration Project...... and for batch compilation of Reports do any one give me the Script.. Because whatever I have is not working.
    I have no errors but also I can't get the error file,log file,output file.
    (Migration is from 5 to 10g)
    Can any one help me.........
    Regards Madhav

    Here is what I use on windows (file is called genforms.bat):
    echo "Generating PLSQL libraries"
    echo "Generating abc10.pll"
    ifcmp90.exe module=abc10.pll userid=hr/hr@db module_type=library logon=y batch=n build=y compile_all=y
    echo "Generating abc20.pll"
    ifcmp90.exe module=abc20.pll userid=hr/hr@db module_type=library logon=y batch=n build=y compile_all=y
    echo "Generating abc30.pll"
    ifcmp90.exe module=abc30.pll userid=hr/hr@db module_type=library logon=y batch=n build=y compile_all=y
    echo "Generating menus"
    echo "Generating abc10.mmb"
    ifcmp90.exe module=abc10.mmb userid=hr/hr@db module_type=menu logon=y batch=n build=y compile_all=y
    echo "Generating abc20.mmb"
    ifcmp90.exe module=abc20.mmb userid=hr/hr@db module_type=menu logon=y batch=n build=y compile_all=y
    echo "Generating abc30.mmb"
    ifcmp90.exe module=abc30.mmb userid=hr/hr@db module_type=menu logon=y batch=n build=y compile_all=y
    echo "Generating forms"
    echo "Generating abc101.fmb"
    ifcmp90.exe module=abc101.fmb userid=hr/hr@db module_type=form logon=y batch=n build=y compile_all=y
    echo "Generating abc102.fmb"
    ifcmp90.exe module=abc102.fmb userid=hr/hr@db module_type=form logon=y batch=n build=y compile_all=y
    echo "Generating abc103.fmb"
    ifcmp90.exe module=abc103.fmb userid=hr/hr@db module_type=form logon=y batch=n build=y compile_all=yUsage is:
    C:\dev><b>genforms.bat > genforms.log</b>For unix you will have to use (file is called genforms.sh):
    echo "Generating PLSQL libraries"
    echo "Generating abc10.pll"
    ifcmp90 module=abc10.pll userid=hr/hr@db module_type=library logon=y batch=n build=y compile_all=y
    echo "Generating abc20.pll"
    ifcmp90 module=abc20.pll userid=hr/hr@db module_type=library logon=y batch=n build=y compile_all=y
    echo "Generating abc30.pll"
    ifcmp90 module=abc30.pll userid=hr/hr@db module_type=library logon=y batch=n build=y compile_all=y
    echo "Generating menus"
    echo "Generating abc10.mmb"
    ifcmp90 module=abc10.mmb userid=hr/hr@db module_type=menu logon=y batch=n build=y compile_all=y
    echo "Generating abc20.mmb"
    ifcmp90 module=abc20.mmb userid=hr/hr@db module_type=menu logon=y batch=n build=y compile_all=y
    echo "Generating abc30.mmb"
    ifcmp90 module=abc30.mmb userid=hr/hr@db module_type=menu logon=y batch=n build=y compile_all=y
    echo "Generating forms"
    echo "Generating abc101.fmb"
    ifcmp90 module=abc101.fmb userid=hr/hr@db module_type=form logon=y batch=n build=y compile_all=y
    echo "Generating abc102.fmb"
    ifcmp90 module=abc102.fmb userid=hr/hr@db module_type=form logon=y batch=n build=y compile_all=y
    echo "Generating abc103.fmb"
    ifcmp90 module=abc103.fmb userid=hr/hr@db module_type=form logon=y batch=n build=y compile_all=yUsage is:
    server:/u1/app/oracle% <b>genforms.sh >> genforms.log</b>Not sure what version you are migrating from, I don't think version 5 of reports exists.

  • Program-calculator

    hiiiiiiiiiii
    program to perform arithmetic operation in java by checking precedence
    i have a doubt can anyone clear that
    using java
    i have got the elements using an String array and printed the array..
    i should check each element in the array for precedence to perform the arithmetic operation..how it can be done
    byeee

    I have a doubt about your doubt.
    I also doubt anyone is going to do your homework for you with practically no effort of your own shown.

  • MF70- separated backflushing  issues-COST COLLECTOR BLOCKED -reg

    Hiiiiiiiiiii,
    Short Text .   
    MF70-Separated Back Flush Process Encountering issues -reg    
    Long Text    
    While performing MF 70-Separated Back Flush Process System is
    encountering Major Errors
    1.Cost Collector Blocked
    2.Maximum No.of FI items reached
    Checked for up to date costing, need inputs to resolve the above
    issues       
    Steps for Reconstruction    
    MF70-CHECK " Post goods issue" -check "make to stock "---
    plant "H001"-Material "G51900305R"--Posting date "01.04.2008 to
    13.05.2008"----
    check "parallel processes " in
    Settings
    ( Step wise details are atatched in the atatchment )
    Cost collector blocked is the major issue as max no.of FI items reached needs a decesion to make on  some customization
    Madhu Kiran,,,,,,,,

    Hi,
    Refer the OSS Notes: 562387 & 539452.
    It may be useful.
    Regards,
    Siva

  • Continuous noise (little noise)

    Hi,
    I started earing a continuous noise from my macbook, above the letter S in the keyboard.
    is this the noise that is "natural" to ear?
    It looks like a hiiiiiiiiii... continuous.
    And it stops when I click in the mouse (pad) button... :S
    Is this normal?

    Yes, then it probably is the whining. Currently there is no real solution for this, except for little programs that keep the processor running. Unfortunately, this will degrade your battery life a bit. You may as well keep photobooth open if it annoys you. If it doesn't annoy you, it's completely fine, meaning your computer isn't going to be harmed at all. I don't know exactly what causes the whine, but I've heard its some kind of "oscillation" between miniature parts in the processor.
    Zeb

  • Deletion of 54Fchallan

    hiiiiiiiiii
    when i m deleting the challan by j1if then system showing a error msg...
    Challan 0000000129 not valid, Material document 4900076578 having different
    vendor
        Message no. 8I568
    how i can delete this challan?
    regards
    Rekha sharma

    Hi,
    Try with the combination of challan number and fiscal year to delete the particular challan.

Maybe you are looking for