Hints and Tips ... sorry... Like IBM's

Dear Folks,
I know something (very few) about oracle Database.
I'm also interested on Linux.
A friend presented me the following webpage which seems to be quite good:
http://www-106.ibm.com/developerworks/offers/linux-speed-start/?S_TACT=103AMW01&S_CMP=sslx03tile#sek
In it I found a tutorial like:
http://www-106.ibm.com/developerworks/linux/library/l-ss3-db2/
Does OTN or any other Oracle webpage carry anything like this?
Is there any movement in order to provide such step-by-step tutorials?
Thanks!
Bernardo

Oracle by Example Series
http://otn.oracle.com/obe/paa/index.html
http://otn.oracle.com/tech/linux/content.html
http://otn.oracle.com/
HTH -Kevin

Similar Messages

  • Hints and tips about OCP certification 10g

    Hi,
    in a few weeks I will have my certification test for OCP Oracle 10g.
    For this I'm interested in hints and tips for the test. Did somebody completed this test (not the upgrade one) and could tell me please the main topic, some tips for best preparation and so on? Are the questions only "multiple choice" or are there also "fill-in" questions?
    Thank you in advance
    Dana

    Hi Dana
    It's all multiple choice. If you are going for OCP I assume you will be writing 10g DBA 2. The following link has exam details like passing score, points per chapter, etc.
    http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_org_id=30&lang=US&p_exam_id=1Z0_043

  • IWeb Hints and Tips

    How about hearing your Hints and Tips for iWeb?
    Here's one to get the ball rolling.....
    Most of my attempts at graphics have been done in Keynote due to the extra features that iWeb will hopefully inherit some day. (Apple please take note!)
    The navigation buttons were made in iWeb and are a bit of a pain to do every time. Here's a tip on how to save them in a file for dropping into other web pages. I discovered this by accident when I was poking around the iDisk files to see what happened to my web pages after I hit the publish button.
    Make up a page of your graphics and publish it. Then open up your local iDisk and go to Web/Sites/iWeb/Website/PageName_files and there you will find your graphics listed as shapeimage_1( 2 3 4....).png. Drag these out and drop them into your newly created Web Graphics folder. Drag and drop them onto iWeb pages as required.
    http://web.mac.com/roddymckay/iWeb/PlanetRoddy/Roddy.html
    This site changes with the wind - get to it quick before it disappears!
    Due to an overload of graphics, music etc. it downloads at snail's pace - so much for "High Speed" internet.
    iMac G5   Mac OS X (10.4.5)   1.5GB Ram

    Funky, I liked it
    I keep all my graphics in an iweb images folder as the original .key files. This way, if I ever want to make a change to just the stroke or fill or the included text without redoing the image, I can.
    Here's an added tip for Keynoters. If you bring over grouped shapes, iWeb will not allow you to add a drop shadow to them. To enable this, copy the group, open Preview, do a command-N, then copy the image from there. It'll get pasted into iWeb as a PDF and you'll then be able to add a shadow.
    http://www.makentosh.com

  • Hints and tips for creating a wireless network with windows

    G'day All,
    I am trying to setup up a wireless network so I can share large files between my Macbook Pro and my housemates Windows XP machine.
    I have no problem actually creating the network on my Macbook Pro and his windows machine can "see" it butI'm having trouble with my housemate's machine actually logging into my network (he can see it though).
    I happy for him to dump the files (camera raw files) into my Drop box if it's the easiest solution.
    Can anyone provide me with a basic step by step guide on what settings i need to fiddle with on both machines for it to work.
    Thanks in advance.

    Hi DAC73-
    Anything useful here: Mac OS X: Setting up Windows File Sharing?
    Luck-
    -DaddyPaycheck

  • FrameMaker FDK Developement - hints and tips needed

    Hi.
    I have looked around after information about how to develope with FrameMaker FDK, but I can't find any good examples for a FDK newbee.
    Anyone that knows about some useful links where I can find information about how to get started?
    I have tried google, but I couldn't find anything good.
    Thanks,
    Per

    If you need to create quick fixes to speed up production, then definitely investigate Framescript first. It's a complete IDE environment that lets you try things out iteratively. It has virtually all of the capabilities of the FDK and lets you access system resources as well. The documentation is extensive and there is a third-party tutorial book available from Rick Quatro at http://www.frameexpert.com
    There is an active group on Yahoo for this as well at http://groups.yahoo.com/group/framescript-users/
    Depending upon where you reside there also are some training classes available for this via Front-Runner Training in Toronto,
    see: http://www.front-runner.com/TrainingCategoryDetail.php?cid=76&catid=4&compid=1&pageNum_Cat egoryCourses=00

  • Hi, Just wondering if anyone has used the Jurassic Park game on an i-pod and experienced it freezing or being very slow on a regular basis?  If so, does anyone have any hints or tips?

    Does anyone have experience of using the Jurassic Park app game on their i-pod touch, and experiencing freezing and/or slow response?  If so, could you share any hints or tips that you have found that resolves these issues?  Many thanks.

    I have not seen that posted here before
    Try:
    iOS: Troubleshooting applications purchased from the App Store
    Contact the developer/go to their support site if only one app.
    Restore from backup. See:
    iOS: How to back up              
    Restore to factory settings/new iPod

  • Some pictures in I-Photo seem to be corrupted. When I click on them, the photo comes up for a second, then the picture turns black with a white fuzzy circle inside it and what looks like an explanation mark. Some older, some newer,  no common thread.

    Some pictures in I-Photo seem to be corrupted. When I click on them, they come up for a second, then turn black with a white circle in the middle and what looks like an explanation mark. There does not seem to be any rhyme or reason to the photos that are a problem, some older ones, some newer, some albums have none, some albums have a lot.
    Thanks,
    Mark

    time to time (when I have a chance), I will go to Finder, bring up ALL Images and start going through them to label them (before I put a label on them, they are simply listed as 123 jpg, 124 jpg etc.).
    You're damaging the Library doing that, and that's the cause of your problem.
    Never, ever, ever use the  All Images search and work on items in yoyr iPhoto Library. They must only be accessed via the iPhoto window.
    Restroe from abck up or try rebuild the Library:
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    Next: You need to learn how to use iPhoto. There's no need to be dragging things to the desktop:
    For help accessing your photos in iPhoto see this user tip:
    https://discussions.apple.com/docs/DOC-4491

  • I have a white unibody macbook 6.1 running 10.6.8 and I would like to upgrade so I can use icloud. what is my best option? as it looks like its too old to run mountain lion? thanks!

    I have a white unibody macbook 6.1 running 10.6.8 and I would like to upgrade so I can use icloud. what is my best option? as it looks like its too old to run mountain lion? thanks!

    They are Safari bookmarks and Snow Leopard Safari will open in Mountain Lion, but won't give you a window?????
    Here are the bookmarks, since I'm now in Snow Leopard:
    http://www.wilmut.webspace.virginmedia.com/notes/icloudmail.html
    http://ihelpyourmac.com/wordpress/?p=23
    http://hints.macworld.com/article.php?story=20111014102515403
    http://hints.macworld.com/article.php?story=20111014102515403
    Advance warning - Mail worked fine.
    I had fits with the last link I posted. At first it worked fine, then all of a sudden, it quit working. I now have iCloud - iCal syncing, but iCal is read only. Not a real big deal since you can log onto iCloud using Safari and post a new event.
    I finally gave up on Address Book because it kept creating multiple contacts, which if you tried to merge or delete the multiple contacts, the contacts were deleted. It also worked at first and then stopped working as it should.

  • Is there a group that is porting the firefox, thunderbird and/or seamonkey to IBM AIX(5.3, 6.1 and/or 7.1)?

    Just trying to find a newer version of firefox, thunderbird and seamonkey for my
    IBM AIX (5.3 and 7.1) systems.
    Wondering if anyone in this forum knows of anyone trying to port one of the
    latest version to AIX. (I am using firefox 3.6.28, thunderbird 3.1.20 and seamonkey 1.1.18)
    Really need to update these products. Unable to fully access a lot of sites.
    Would appreciate help locating a never version that runs on my system.

    Sorry, the situation hasn't changed ([https://support.mozilla.org/questions/935325 935325], [https://support.mozilla.org/questions/959919 959919]). I suggest you direct this question either at IBM support, or at the AIX forum.
    * [http://www-03.ibm.com/systems/power/support/index.html Support]
    * [http://www-03.ibm.com/systems/power/community/index.html Community]
    * The only [http://www.mozilla.org/firefox/all/ official builds] are for Windows, Mac and Linux.
    * The only [ftp://ftp.mozilla.org/pub/firefox/releases/27.0/contrib/ hosted contributed build] is for Solaris.
    * IBM only makes mention of [http://www.ibm.com/systems/power/software/aix/browsers/ Firefox 3.6.25].
    * I couldn't find any third-party builds more recent than 3.6.28.

  • Hello I wrote a technical french book on " iBooks Author" and I would like to Know witch catégorie I should choose?

    hello I wrote a technical french book on " iBooks Author" and I would like to Know witch catégorie I should choose?

    Sorry,  I  cannot remember all teh  many options of category and sub categories offered during the delivery process.
    A very simple solution for you is to use Google Translate to convert the category  titles  to French
    Another option is  to  use the iBooks store -  search for books made with iBooks Author  open a few preview / sample books to look at the information page and check which categories are used the most... and use the same!

  • I have an Ipad2 and my daughter has Iphone 4s and I would like to have all SMS and IMessages duplicated on the IPAD2 I was told I could do this by typing in the mobile phone number into the IPAD2 some where in the settings.

    I have an Ipad2 and my daughter has Iphone 4s and I would like to have all SMS and IMessages duplicated on the IPAD2 I was told I could do this by typing in the mobile phone number into the IPAD2 some where in the settings.

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • Im From United Arab Emirates and I would like to purchase mini Ipad, however, the option for buying doesnt appear for me ?! is there a list of countries !!!!!?

    Im From United Arab Emirates and I would like to purchase mini Ipad, however, the option for buying doesnt appear for me ?! is there a list of countries !!!!!?

    Unfortunately, Toshiba USA doesn't ship there, and it's not available to download. You'd have to see if there's a third-party that could sell you it or have someone you know in the US order it and then ship it to you. Sorry.
    - Peter

  • Installation of EPM 11.1.1.1.0 - hints and pitfalls

    Hi EPM 11.1.1.1.0 installer guys ,
    First of all I would like to note that I have spanned a lot of hours during the last weeks in trying (and failing) a successful installation of EPM 11x.
    I will not talk much about the first version - forgot about it.
    However installing the latest version 11.1.1.1.0 can be (and in fact is) a challenge; especially for people who have never tried it before.
    I do think it's fair to not tell you about all the trouble, wrong assumptions and frustration I had to walked through.
    So simple let me rather know you about some pitfalls and how you can work around them.
    Please note (that maybe important) that all things I'm talking about here are relating to the following prerequisites:
    A) PC: WinXP, SP2, 4GB RAM, x.x MHz, dual core HT, Repository-DB Ora11gR1
    B) VMWare: Win2003 Server, 4GB RAM, x.x MHz, dual core HT,Repository-DB Ora11gR1
    Download from: [http://edelivery.oracle.com/]
    <ol><li>Not all download files are included in the .1 -Version. For the HPS source for example you have to look into the download area of .0- version
    </li>
    <li>The uninstaller does not work properly. This is a known bug. So if you want to step back or repeat the installation from the same basis as before, or for any other reason if you want to get your system back in a clean pre-installation condition - take a backup of your entire system (snap shot, image or what ever). It's worth the effort!
    </li>
    <li>A installation of EPM and Ora11gR1 on the same hardware is possible but I would not recommend it.
    </li>
    <li>I had the effect that during the installation process and more during the configuration and deployment the Ora11gR1 consumed more then 50% of CPU and sometimes increases up to 100% whiteout any obviously reason. So during the entire EPM installation process when ever you don't need the DB alive shut it down and start it only when needed. If you are unsure about that rather let it be, however the installation will take (very) significant more time.
    </li>
    <li>I have found instructions in the web where a installation of the EPM Oracle-DB site components are described as the user SYSTEM. This is an absolutely no-go! NEVER do install anything into the SYSTEM-Schema of a Oracle-DB. Before you start the EPM installation process prepare your Oracle-Schema initially. You can find a sample DDL script at the end of my posting.
    </li>
    <li>It seems to be best to install and configure all needed components in one round. This is an important difference to the .0 version where you run in trouble when doing so. Since in version 0 exactly this caused an error. I tried to avoid this in version 1. But in version 1 you now run into trouble when you stripe the installation into two courses (one for Ssh only and the other for the rest). However, if you want (or have to) to split the installation into single tasks or if you want to install a component later on, you will run into the error that the OpenLDAP service disappears. First (during the x+1 installation) it is being set to "Disabled, and after the next reboot it is no longer there. You can reload it to the services with the following command, to be execute in the OpenLDAP directory (&lt;drive&gt;:\Hyperion\products\Foundation\openLDAP).
         slapd.exe install OpenLDAP-slapd "Hyperion Foundation OpenLDAP"
         When you are done with that check the services and manually set the start property to "Automatic" (if you want it starting automatically) . Please note that in version 1 you have to repeat this every time when you install an EPM-component.
    </li>
    <li>And yet, before you move your hands in order to start the installation - stop ! Take a breake and the time to read the manuals first.
    </li>
    </ol>
    I hope this can help you to make your installation successful !
    Warm Regards
    Andre
    DDL-Script for creating the EPM-Repository-Schema in a Oracle 11gR1 DB:
    Connect as SYS (DBA) and run this script:
    If you would like to use a separate table space (and not the common USERS) for you EPM data create one (or kindly ask your DBA) and customize it in the script.
    CREATE USER EPMREP
    IDENTIFIED BY EPMREP
    DEFAULT TABLESPACE USERS
    TEMPORARY TABLESPACE TEMP
    PROFILE DEFAULT
    ACCOUNT UNLOCK;
    -- 1 Role for EPMREP
    GRANT CONNECT TO EPMREP;
    ALTER USER EPMREP DEFAULT ROLE ALL;
    -- 12 System Privileges for EPMREP
    GRANT CREATE SYNONYM TO EPMREP;
    GRANT ALTER SESSION TO EPMREP;
    GRANT CREATE VIEW TO EPMREP;
    GRANT CREATE SESSION TO EPMREP;
    GRANT CREATE SEQUENCE TO EPMREP;
    GRANT CREATE PROCEDURE TO EPMREP;
    GRANT ALTER USER TO EPMREP;
    GRANT CREATE TRIGGER TO EPMREP;
    GRANT CREATE TABLE TO EPMREP;
    GRANT SELECT ANY DICTIONARY TO EPMREP;
    GRANT CREATE TYPE TO EPMREP;
    GRANT ALTER SYSTEM TO EPMREP;
    -- should be revoked after Installation of EPM
    -- REVOKE ALTER SYSTEM TO EPMREP;
    -- 1 Tablespace Quota for EPMREP
    ALTER USER EPMREP QUOTA UNLIMITED ON USERS;

    Hi all,
    After posting the stuff above I had to notice, that it seems to be impossible to make the Essbase Studio running with an Oracle DB back end. I have checked a lot of hints and variation in essbase.properties and server.properties under the Essbase Studio path.
    There seems to be a serious problem during the connection process to the DB.
    Via a logon trigger I was able to prove that a connection is established,
    however every time there comes a error message saying that a table is not there.
    If someone has the same problem, please post it too.
    If someone was able to make it work - even better, please let me (and others) know how to make it right.
    Thank you!
    Andre
    PS:
    This it what I get when I try to start
    Essbase Studio Server.:
    D:\Hyperion\products\Essbase\EssbaseStudio\Server&gt;startServer.batD:\Hyperion\products\Essbase\EssbaseStudio\Server&gt;setlocalD:\Hyperion\products\Essbase\EssbaseStudio\Server&gt;set
    CONFIGTOOL_HOME="D:\Hyperion\common\config\9.5.0.0"D:\Hyperion\products\Essbase\EssbaseStudio\Server&gt;call
    ""D:\Hyperion\common\config\9.5.0.0"\setJavaRuntime.bat"Log file location is:D:\Hyperion\logs\esbstudio\server.log13:53:21 11/27/08 INFO
    Starting up
    13:53:21
    11/27/08 INFO Oracle Essbase Studio Server. Version
    11.1.1.1.00, Build 114, October 7 2008
    13:53:23
    11/27/08 (system) WARNING Failed to load driver for sap13:53:23 11/27/08 (system)
    WARNING Failed to load driver for mysql
    13:53:23
    11/27/08 (system) SEVERE Cannot load Netezza connector13:53:23 11/27/08 (system)
    WARNING Failed to load driver for netezza
    13:53:23
    11/27/08 (system) SEVERE Cannot establish connection to Oracle
    server
    13:53:23
    11/27/08 (system) SEVERE Cannot establish connection to Oracle
    server
    13:53:23
    11/27/08 (system) SEVERE Cannot initialize catalog storage.
    Make sure that server.properties has correct information
    -------------- Exception
    com.hyperion.cp.catalog.exceptions.CatalogInitializationException:
    catalog.CatalogInitializationException.StorageInitializationFailure
    at
    com.hyperion.cp.catalog.storage.StorageFactory.getStorageInstance(StorageFactory.java:155) at
    com.hyperion.cp.catalog.transaction.TransactionManager.initialize(TransactionManager.java:64) at
    com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:98) at
    com.hyperion.cp.catalog.Catalog.initialize(Catalog.java:156) at
    com.hyperion.cp.catalog.Catalog.&lt;init&gt;(Catalog.java:85) at
    com.hyperion.cp.catalog.Catalog.&lt;clinit&gt;(Catalog.java:73) at
    java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Unknown
    Source)
    at
    com.hyperion.cp.catalog.CatalogInitializer.run(CatalogInitializer.java:54) at
    com.hyperion.cp.server.RequestListener$SystemTask.run(RequestListener.java:1302) at
    com.hyperion.cp.server.RequestListener.runSystemTask(RequestListener.java:167) at
    com.hyperion.cp.server.RequestListener.&lt;init&gt;(RequestListener.java:129) at
    com.hyperion.cp.server.ServerMain.main(ServerMain.java:202)Caused by:
    java.lang.reflect.InvocationTargetException
    at
    sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at
    sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source) at
    sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown
    Source)
    at
    java.lang.reflect.Constructor.newInstance(Unknown Source) at
    com.hyperion.cp.catalog.storage.StorageFactory.getStorageInstance(StorageFactory.java:149) ...
    12 more
    Caused by:
    com.hyperion.cp.catalog.exceptions.CatalogInitializationException: No
    table EPMREP.CP_NONE_TRANSACTIONS found
    at
    com.hyperion.cp.catalog.storage.StorageEngine.validateSignature(StorageEngine.java:193) at
    com.hyperion.cp.catalog.storage.StorageEngine.&lt;init&gt;(StorageEngine.java:87) at
    com.hyperion.cp.catalog.storage.SQLStorageEngine.&lt;init&gt;(SQLStorageEngine.java:20) ...
    17 more
    ----------------------------------------D:\Hyperion\products\Essbase\EssbaseStudio\Server&gt;

  • Print Problem : Print descriptio​n and tips from structures​, nodes and loops from block diagram

    Hello,
    I've just completed the entire documentation of my VI and I did describe some Case structures and Formula Nodes. Now I want to print the VI with the VI printer and when I select ''Description'' in the custom printer manager, it doesn't select the description from most functions in the block diagram such as Formula Node, Case Structure,etc. 
    Is there a way to get these descriptions in the printed version VI ?
    Thanks a lot !
    Solved!
    Go to Solution.

    Hi Weepet,
    After some investigation, it turns out that this behavior is expected behavior.  Please see the following help topic
    http://zone.ni.com/reference/en-XX/help/371361G-01​/lvhowto/creating_vi_and_object_de/
    Essentially, Context Help will only display the description for controls, indicators, and constants.  At the same time, the descriptions will only print if that description is available in context help.  LabVIEW primitives will always use the description from the documentation, and will not display your custom "Description and Tips".  So, for primitives like case structures and formula nodes, we cannot get that information to print. The behavior that you're seeing is expected.
    Perhaps you can just use comments to document these functions?  You can double click on a blank area of the block diagram and provide comments.
    Regards,
    Che T.
    Applications Engineer
    National Instruments

  • Work on FB4.5 and Flash5.5 simultanoiusly - lack of code hints and default package classes.

    Hi!
    I setup Flash Professional CS5.5 and FB4.5 to work together. I just followed this tutorial: http://www.adobe.com/content/dotcom/en/devnet/flash-builder/articles/sharing-projects-flas hbuilder-flash.html and almost all looks good, but unfortunately working in Flash Builder adding new Classes I do not have default package Classes accessible. This way I can not even declare Sprite, Array class and so on. In code hints I only gets my current package classes.
    I set the .fla project inside Flash CS5.5 with some folders as the package for my classes. It is for examle:
    com.myDomain.testProject where DocClass exists. By adding this path as the document for FlashCS5.5 all works great, I can easily run, debug movie in the Flash environment.
    Setting this project by 'Import'->'FlashBuilder-FlashBuilderProject'->'ProjectFolder' pointing to the .fla file it seems that the thing goes well. The project is set and even I had some problems with Document Class's name (it seems that Flash Builder need to have Document Class with the same name as the .fla flie) and renaming it I can run or debug it and it works.
    But if I try to add new class to the directory I end up with no code hints, and in fact no default package classes support. That means I get errors trying to create instance of any common class etc. In code hints I am only getting my package hints (look picture)
    Maybe I misunderstand of some package basics and did something wrong, but generally I don't want to put all my classes to the .fla location but to sort them up in specific folders cause I assume that the project is quite large.
    If you can help me, thanks in advance. You know messing up with the code is a part of the programmer nature, and when one finds the answer he feels like a king. When to deal with environments like that, there is never joy and hapiness, but in most occasions couple uncensural words in the end, and a glimpse on the watch - agrrrhh I lost so much time :/
    cheers

    upss, It seems the Flex sdk wasn't added automatically what I didn't noticed. Looked for errors in some other areas (as always)
    Thanks anyway:)

Maybe you are looking for