Hire Act

We are trying to find out how the HIRE act will be handled in SAP. Does anyone have any insight on how this will be handled?

Just to clarify, I am referring to the US federal HIRE act that was just passed, where in its simpliest form you receive tax credits for employing people that were unemployed for 60 days or more and additional credits when employed for a year. There are other circumstances but I wanted to keep it as simple as possible. Below is a link describing the bill.
http://www.adp.com/tools-and-resources/hire-act.aspx

Similar Messages

Implementing the HIRE act in SAP US Payroll

Hi Experts,
Since the new HIRE Act is a regulatory requirement, customers are demanding patch from SAP 's end to implement in the SAP HR system.
Is anyone aware if SAP has already delivered a patch update relevant to this?
Regards,
Somdeb.

Hello Somdeb,
SAP Note No. 1456911 - "Hiring Incentives to Restore Employment Act (PL 111-147)" will contain the information that you are looking for. This note is currently inprocess and will be released soon so please check to see if the note has been released.
Regards,
Manny

Hire Act - W2

Hi,
We didn't implement hire act in the system and we are planning to print exempt wages for hire act in W2; Since we didn't implement hire act in system what i'm planning to do is manual entries in PU19 or create new wagetype and run 221 adjustment.
The amout in wagetype is manually calculated.
I've seen tax form groups for non tax wagetypes has w2cc tax group (Hire exempt wages and TIPS) , i'm planning to assign wagetype to this group. not sure which tax form field on w2(HR_F_W2) this group needs to be assigned to print code cc on w2;
I've assigned w2cc to T090 and checked but i could not see code cc with amount on w2;
I think sap has n't come up with specific instructions yet for W2;
Can you guide me on this;
Regards,
Neelima

We have applied note 1514526 getting Syntax_Error and we never maintained in the HIRE ACT in the system
can you please help us how did you resolved the issues ..we do applied phase three but getting same error
Error in the ABAP Application Program
The current ABAP program "SAPMPU19" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RPCTRPU0 " in include "RPCTRPUA
" in
line 168:
"Formal parameter "IV_TXCMP" does not exist. ."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAPADM "
Error in the ABAP Application Program
The current ABAP program "SAPMPU19" had to be terminated because it has
come across a statement that unfortunately cannot be executed.

Updates to HIRE Act

Hi Experts,
Our client was enquiring for the SAP Note that was scheduled to be released on 2nd June for the new HIRE ACT. Any updates on this front will be highly appreciated.
Regards,
Somdeb.

Hi there, the notes are currently in "pilot" status, meaning they are undergoing final checks before release. Please check the SDN forum regularly, and as soon as the notes are released for cusotmers we will post here to let you know all the relevant information. Thanks for your patience, we hope to have this available soon.

Safari acting up & no internet plug-in

How come Safari is acting up this evening? Yahoo says that I need a Internet Plug-in. Help.
I hope that this goes to Limnos.
I will tell you that I have a Power Mac G4 with two hard drives. First one with OS 9.0 and used only for old Adobe software and backups. The second one is for OS X 10.4 with a upgrade of 10.4.11 from Apple. My Processor: Dual 1 GHz Power PC G4; 2MG L3 cache per processor. Startup Disk OX X10.4 with memory 1.5 GR SDRAM. I have to have two hard drives as the old Adobe software: Pagemaker, Illustrator, Photoshop, and Canvas will not go onto OS X 10.4. The upgrades to these will go onto OS X10.4.
My mac does not have problems with starting up. It starts fine. The problem is that I can't seem to get Adobe Flash Player to work. It loads on fine but doesn't work at all. And now Safari has kidded me off of the internet (4) four times this evening. There was 14 downloads from Apple between the dates 1/30/2012 - 2/2/2012. That was great. But Safari is giving me a lot of trouble. I need to know what I can do to get the Internet Plug-in on and to stop Safari kicking me off of the internet.
I will have to call Adobe and ask them for an older version of Flash Player and go the way to the back door to get the new Flash Player to work. If this doesn't work then I will have to try to hire an old mac person to help me. I really don't want to do this as they will do things their way and chances are they won't know what to do. Please Limnos will you help me???
Gailfromlancaster, CA..

Hi, I'd love to see Limnos here too, but he gas a problem with his G4 right now & only has a borrowed W7 PC at the moment.
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/865/cpsid_86551.html#prob1=uninst,os=m10.6,
Download this if you haven't...
http://fpdownload.macromedia.com/get/flashplayer/installers/archive/fp10.1.102.6 4_and_9.0.289.0archive.zip
Once downloaded if it doesn't unzip automatically the double click on that file.
Look for the fp10.1.102.64_and_9.0.289.0archive folder, open it, look for the Flash Player 10.1.102.64 folder & open and look for 101r10264 folder & open it, double click on the flashplayer101r102_64_ubmac.dmg file, choose the Install Adobe Flash Player file to install... they don't make it easy!
Or I put up the smaller ones here...
http://dl.dropbox.com/u/450421/flashplayer10_1r82_76_ub_mac%20copy.dmg.zip
Stand alone player...
http://dl.dropbox.com/u/450421/LastFlashPPC.zip
Or free 3rd party...
http://www.wimpyplayer.com/products/wimpy_standalone_flv_player.html
The last really supported Flash for PPC was 10.1.102.64, but if it's for like Facebook or such, people have been fooling FB to think they have a leter version installed.
Texas Mac Man's Flash hack/post...
https://discussions.apple.com/thread/3599648?tstart=0
See in each Browser which version of Flash it thinks it has...
http://kb2.adobe.com/cps/155/tn_15507.html

New Hire step by step.

Can someone kindly show we the exact paths needed to hire an employee. I have already created the NUMKR feature to assign personnel number automatically in the ESG and created the other preliminaries PA, PSA, EG, and Country Grouping.
I've heard PA40 mentioned but don'f know the steps.
I need the sequence of infotype to be in 0000, 0001, 0002, 0006, and 0007
Many thanks.
Tomuri

check
V_T588D in this one u will insert those infotype with operation to ur action
Access the activity using one of the following navigation options:
Menu  extended table maintenance  table maintenance  services System T588C
Transaction Code SM30
2. Make a check on User-dep.
Menu type Menu Text User-dep.
G Y1 Hiring Service Provider checked
IMG Menu  Customizing Procedures  Personnel Administration Personnel Management   Define infogroupsActions
Transaction Code SPRO
User group dependency on menus and info groups
Menu Text User-dep. Reaction Ref.
Y1 Checked blank 01
Customizing Personnel Administration IMG Menu Personnel Management   Set up personnel actions Actions Procedures
Transaction Code SPRO
Action type Name of action type FC Employ-ment Spec. pymt Check P PA EG ES IG U0000
Y1 1 3 1 _blank x x x x Y1 x
Creating Reasons for Personnel Actions
 Personnel Administration IMG Menu Personnel Management   Create reasons for personnel Actions Customizing Procedures actions
Transaction Code SPRO
Reason for Action:
Action Name of action type Act.reason Name of reason for action
Y1 blank blank
1. Access the activity using one of the following navigation options:
Menu  extended table maintenance  table maintenance  services System VV_T588C_M_AL0
Transaction Code SM30
2. Choose menu type M.
3. Entry table VV_T588C_M_ALO and make a check on User-dep.
Menu type Menu Text User-dep. Reaction Ref.
M 01 Actions checked 01
Action Menu
Procedure
1. Access the activity using one of the following navigation options:
extended table maintenance  services Menu System   V_588B_Mtable maintenance
Transaction Code SM30
2. Choose menu type M and menu 01.
3. Make the following entry.
Usergroup No Action Name of action type
01 20 Y1 Hiring action services
inputs from one of the team member
Edited by: Sikindar on Nov 21, 2008 2:58 PM

My MacBook was acting weird so I restarted it and when I login a white screen flashes and goes back to the login page. Help?

My MacBook was acting weird like sometimes I would log on and I wouldn't be able to type my password for a couple seconds,but it usually logged in after that. Then I left my computer open after installing the recent update after that all my applications were not responding. So I shut it down, when I turned it back on about an hour later it went to this loading screen and then to the login like usual. After I tried logging in a white screen flashed and it went back to the login/ password screen like nothing happened. Any ideas on what happened and what I can do to fix it?

Reinstall OS X;
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Is there a way that iTunes can act as a Radio Alarm Clock? I have found the radio station I enjoy listening to in the iTunes Radio List. Is there anyway iTunes (and my Mac) can be set to come-on and start playing that Radio Station from Sleep mode at spec

Is there a way that iTunes can act as a Radio Alarm Clock?
I have found the radio station I enjoy listening to in the iTunes Radio List. Is there anyway iTunes (and my Mac) can be set to come-on from Sleep mode and start playing that Radio Station at specific times of the day?
Any App or plug-in that does that?
Many thanks
Kevin

Turning your Mac into a clock radio.
1. In iTunes create a playlist that contains just the radio station you want to wake up to.
2. Export the playlist (as .m3u works well). Get Info on your playlist file and look at the Open With entry to make sure it points to iTunes, VLC or some other app that will stream your station.
3. In iCal create an event entry at the time you want to wake up.
4. Right (or Control) click on your wakeup event and select Get Info.
5. For "alarm" select Open File.
6. Now under Open File there will be a place to add the file to open. It will probably be some default entry (like iCal). Click on it will allow you to select "other." Then use the file dialog to select your playlist file.
Your Mac will wake you up at the appointed time. You don't need to keep iCal running. If you want to put you Mac to sleep for the night then there is one more thing you need to do. Open System Preferences to Energy Saver and click on the Schedule button. Check Start up or wake and set the wake up time to slightly before your iCal alarm time.
Dan

I have a MacBook Pro and an 1TB WD my passport for mac. I bought a second hard drive to act as back up and when I went to do this the original passport won't mount. It is showing in disc utility but it will not repair. I am told the mac cannot repair it.

I have a MacBook Pro and an 1TB WD my passport for mac. I bought a second hard drive to act as back up and when I went to do this the original passport won't mount. It is showing in disc utility but it will not repair. I am told the mac cannot repair it and I need to back up the files and then restore the hard drive. But I can't open the hard drive to move the files onto the new one!
Help me please. I am not very technical so please answer as if I have no clue!! This hard drive has my iPhoto on it and all my pictures of my son, wedding and my current photography course so I desperate to get it back!
Any help will he appreciated!

disk0s2: I/O error.
disk0s2: I/O error.
The MBP's disk is damaged and requires replacement.
Genius Bar Reservations: http://www.apple.com/retail/geniusbar/

Accidentally overwrote iPhone with iPod on iTunes. How do I get my data back? Now iPhone acts like iPod.

Hooked iPhone onto Mac to download songs from iTunes. Accidentally restored it as the iPod previously used. Now all data, pictures, content erased from iPhone. Now it acts as an iPod. iPhone was never synced with the Mac nor backed up. It will now, but how do I revert to the old iPhone?

The hard drive cannot be damaged any further by simply removing it and then putting it back in. If it was getting progressively worse, it may now be at a point where the data is not accessible in any normal way.
Since your iMac is still covered by warranty until December, you need to get it fixed. That is the first step. Whether you can recover your data or not, you need a working iMac. Ask the Apple Store to give back the broken hard drive so that you can send it to a data recovery shop, even if you do not intend to do so. If Apple says they need to retain the old drive (since it is being repair under warranty), take it to an Apple authorized repair shop (who can do the same work under warranty) that will let you keep the old drive.
After getting your iMac fixed and working normally, you can try to recover the data. You may be able to access it through a USB or FireWire external case. But if the drive is not at least visible in Disk Utility, I don't think other utilities such as Disk Warrior and TechTool Pro will help.

Safari is acting strangely on several counts

For the last several days, Safari is acting strangely on several counts. I haven't downloaded any updates or plugins recently, and I am not aware of any Safari viruses on Mac OS X, so I'm totally lost here. Please help!
1. Periodically, Safari will stop loading a page completely. So it will start and then the url bar will be partially blue and the circle will keep circling but nothing will happen. Once it does this on one tab in that window, it will start doing it on all new tabs opened up in that window, but any original tab there might still go through. If I close the window and reopen another window, all sites on all tabs will go right through. I tried disabling DNS prefetching, and that helps Safari behave for a few minutes, then it goes back to such strange behavior. I tested using my wireless and using a different network, and it happens on both, so it's not my router. Sometimes, opening a new window doesn't help. So I shut down Safari and restart. Sometimes that doesn't help either, so I end up having to reset Safari. Obviously, having to reset Safari multiple times a day is neither productive nor ideal.
2. When it does that url thing, it also seems to become incapable of completing from history or bookmarks. So for example, if I open a tab and type a website name, it won't complete it, even though I have that bookmarked. Generally when that happens on the first tab of a window, I can pull up the site from bookmarks and it will load immediately. But the next tab I open in that window, will do the webpage not loading business I described in #1 above.
3. A short while ago, i tried resizing a window and it did the strangest thing where it would expand the window space, but just give me a "gray area" rather than expanding the whole web page. I closed the window, opened a new one and resizing worked fine again.
4. A short while ago, another strange happening: everytime I opened up a new tab in the window and loaded a site, it would merge that tab with my old tab and delete the first tab, so at any given time, it was just a single tab window. I closed the window and reopened, and voila normal tab behavior again.
Strangely, if I have two windows open - as I often do - only one window will be affected by such strange behavior. The other one will function normally. But such odd behavior is not limited to instances when I have two windows open. It's also happening when there's one window open. For reasons I do not understand, it seems something in the processes of a window gets corrupted after a little while on Safari and that window starts acting strangely.
Odd and irritating and difficult. I'd greatly appreciate your help!
I'm using Safari 5.0.6 on OS X 10.5.8... thanks!

I don't see anything in your post regarding the Safari cache. BTW, a "reset" does not empty the cache.
From your Safari menu bar click Safari / Empty Cache. Restart your Mac, try Safari.
If that didn't help, quit Safari if it's open.
Go to ~/Library/Caches/com.apple.Safari
Move the Cache.db (or ApplicationCache.db) file from the com.apple.Safari folder to the Trash.
Try Safari.
If nothing above helped, make sure there's enough free space on the startup disk. Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you have a minimum of 15% free disk space.
If nothing above has helped, try Safari in another user account. If you see the same issues there, log back into your admin account.
Launch Disk Utility. Select the startup disk in the panel on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If the disk needs repairing follow the instructions for Using Disk Utility to verify or repair disks.

Session keep Alive when EBS is integrated with OIF acting as SP

We have an E-Business Suite R12(12.1.3) Application which is integrated with Oracle Access Manager 11.1.1.5. For authentication the Oracle Access Manager delegates the authentication request to Oracle Identity Federation acting as a Service Provider (SP). There is a home-grown SSO which acts as the Identity provider by Federating it with OIF using SAML 2.0 protocol.
The integration is successful and EBS is able to authenticate using this third party SSO.
Now there are multiple applications which are integrated with this third party SSO and the user can access any of these applications including EBS.
Considering a scenario where a user is using EBS Application say for more than 30 mins. Now when he tries to login to another application the challenge screen is thrown though he can continue to work on EBS without any issue. The reason being that the session timeout on the IDP side is set to 30 mins.
To overcome this issue the solution that has been thought of using a javascript for each page load on the application which will update the SSO token with the latest UTC time on the IDP server. This has been successfully done for all other applications except EBS.
So my question is how we can call this java script for each page load for EBS?
Thanks & Regards
Sarbashis

It appears that OAM is removing the url parameters for the p_done_url sent to it by OIF.
302 Redirect to -> Location: https://sso.mycompany.com/oam/server/logout?p_done_url=https%3A%2F%2Fsso.mycompany.com%2Ffed%2Fuser%2Fsloosso%3Fid%3Dosso%26type%3D3&invokeOSFSLogout=false
Result: 200. Set-Cookie OAM-ID to expired.
Form Submits: https://sso.mycompany.com/fed/user/sloosso
Result: 500 Error
Notice the p_done_url value in the redirect has extra parameters which when the Form is submitted are lost.
If I manually enter the url: https://sso.mycompany.com/fed/user/sloosso?id=osso&type=3&invokeOSFSLogout=false
Then I am successfully logged out.
This seems almost like a bug in OAM...

I connected an external monitor to my MacBook Pro, but it doesn't open any programs. It Just sits there with a blank screen. How do I get it to open programs and act like a monitor?

I connected an external monitor to my MacBook Pro, but it doesn't open any programs. It Just sits there with a blank screen. How do I get it to open programs and act like a monitor?

Dear Jean:
It sounds like you are trying to get your external monitor to act as the primary viewing screen. For example it would have your Doc, Icons, Etc. In order to make the external monitor the primary screen you have to:
Open System Preferences.
Choose the Displays Icon
There will be several tabs to choose from pick Arrangement
Drag the toolbar to desired display
Let me know if this helps at all!
Lance

My earpeice on my Iphone4 does not work. It acts as if i still have earphones plugged in. I have tried plugging in and out the earphone several times but it still has not resolved the issue. I have rebooted my phone but the problem still exits. Suggestion

Hi, I am using and Iphone 4 with OS 4.2.1, I recently started facing issues with my iphones earpeice. It acts as if the earphones are still connected. I have tried plugging in and out the earphones several times as per several posts confirming a fix for the issue, however i am still facing the problem. Please suggest..!!!!

We had the same problem, but figure out the solution.
You MUST have at least 1 song added to your ITUNE! After you add a free song, then everything else should work as normal!
Hope this helps!

HR-PA Personnel Administration Adjusted Hire date not in std extractor?

All,
Does anybody know if the dates in PA0041, like adjusted hire date, Original hire date, Severance date, etc are available in extractors? I have been doing BW for some time, but am new to HR. I don't want extend the 0employee data source with these dates unless I have to. Any advice would be greatly appreciated.
Kind Regards,
Chris

Savornin,
Thank you very much for your reply. It was very helpful to me.
Kind Regards,
Chris

Hire Act

Similar Messages

Maybe you are looking for