Hiring more than one person to the same position.....

Hello, experts,
Am surprised to see that I cud hire another person for the same position which was already occupied 100%. I understand that a position may be filled by more than one person, totalin to 100%. In this case, though one person occupies the position to 100% full, am still able to hire. Could anybody help me with this as to why is it so.
thank you,
Sarita.

Hello sarita,
The problem is coming from the setting of the relationship A008 in table V_T777ZVK, which is set to 2 instead of 3.It is not recommanded to change the standard setting as it can cause issues, which can be critical, refer to note 396103 for mor information on the consequences.
If you want to have warning message in PA40 when assigning position to make sure only one person is assign to one position, you can do the following:
If the 100 % check is set to 'W' in T77VA you get a warning message
telling you that the A008 relationships of P xxxxxxxx exceed working
hours by xxx % Message no. 5A 321
You should set this flag to 'W' for example when there are two persons who should be assigned to the same position, i. e. when they are working part time.
If the 100 % check is set to 'E' in T77VA you will get an error message telling you that A008 relationships of S xxxxxxxx exceed 100 % by 100.00 % Message no. 5A 323
To get this error message please make sure, that you have maintained both entries in table T77VA (relationship characters):
Best Regards,
Deepak.

Similar Messages

  • How to pixalet more than one person on the same piece of footage?

    Trying to pixalet more than one person in a piece of video footage with Final Cut Pro X. Having problems trying to do more than one person.

    rebelrider1 wrote:
    Trying to pixalet more than one person…
    you can apply the Censor Effect, as most other effects, more than once:

  • How can you text more than one person at the same time?

    Is it possible to text multiple people at the same time?

    Nope - not at the present time anyway.

  • Insert more than one contact in the same page/document

    Hello,
    I have tried without success to insert more than one contact into the same page of a document.
    For example, if i insert 2 Address book fields in a page, when i drag a contact from the address book then it populates automatically the 2 fields, and it is impossible to separate these fields and to populate them with 2 different entries (on the same page).
    And when you drag more than one contact to Pages, it asks you if you want to create one document per contact.
    Would it be possible to just insert 2 or more different contacts on the same page/document ?
    Thanks in advance for any help,
    Fred.

    Unfortunately, this can't be done with Pages, nor could it be done with AppleWorks. I think the assumption is that you would merge into a letter & one letter sent per person. In checking the 3 postcard templates in Pages 3, none of them have address book fields to drop contacts into.
    There is a workaround, but it might not be worth the effort. Create your postcard as a single, large document in page layout in landscape & merge to a new document. Then, in the print dialog, choose Layout from the drop-down menu that says Copies & Pages & choose 4 from the Pages per Sheet menu. You might also want to add a hairline border for cut lines.

  • Is there a way to put an item under more than one calendar at the same time?

    I use the calendar to keep track of not only my schedule, but my entire family's. For years I had a calendar labeled 'kids.' Now as they're getting older it would be easier to have an individual calendar for each child. Easier for me to track where they are and they could have they're own calendar on their iphone or iphone touch since we all share one cloud account. However, frequently more than one is at the same activity. The calendar program will only allow me to select one calendar to place an event under; as soon as I select another, it deselects the first. Is there a way to place an event under more than one calendar?
    (Since I'm still the one driving that needs to know date, time, place, etc type details I don't want them adding it to their own schedule - maybe -  on their devides and synching through cloud)

    You can create many calendars. Here's the tip:
    Example: you have 1 son and 1 daughter.
    In iCloud ( https://www.icloud.com )
    Create 1 calendar called Son ( Choose a color to tell them apart )
    Create 1 calendar called Daughter ( Ditto )
    Create 1 calendar called Kids
    Since you are the creator, you get to see all calendars combined.
    Send invitations to each of them
    Son gets Son and Kids calendars
    Daughter gets Daughter and Kids calendars
    So if there an event for Son, just put in that calendar
    If it's for both then enter it in the Kids calendar
    Likewise for daughter.

  • More than one library (on the same computer) open?

    In the new iTunes 9 it is possible to access several libraries on my home network from the open iTunes window, which is really cool. I wondered if this means it may now be possible to have access to several libraries on the same computer (or connected drives) at the same time. I use 3 different libraries on my work PC and my mac at home and the process of shutting down iTunes, holding down shift/option, reopening itunes, selecting library is rather cumbersome. Having each of the libraries accessible the same way they are for other libraries on the network would be really useful.
    Is it possible?

    pajagsfan wrote:
    Can I create more than one library on the same computer?  Just got an ipod for my wife but didn't want her to have to use my library to sync to, so I thought I created another library for her.  When I deleted my albums from her library the disappeared from mine. (I think?)
    I know it's Valentine's Day, but before you get your wife fixed up the first thing you need to do is recover the deleted albums for your own library.  See if the files are elsewhere on your hard drive, or in the Recycle Bin.  When you find them, get them back into your own library.  Now you are ready to help your wife.
    As noted above, you can have two libraries in one Windows user account via the Shift-Start approach, but if you both use your libraries regularly, that becomes annoying quickly.  It is better to set her up with her own Windows user account. She can have her own iTunes library there.
    Get a copy of your entire iTunes folder to start her off.  She can delete stuff she doesn't want without messing you up.

  • Can i create more than one library on the same computer?

    Can I create more than one library on the same computer?  Just got an ipod for my wife but didn't want her to have to use my library to sync to, so I thought I created another library for her.  When I deleted my albums from her library the disappeared from mine. (I think?)

    pajagsfan wrote:
    Can I create more than one library on the same computer?  Just got an ipod for my wife but didn't want her to have to use my library to sync to, so I thought I created another library for her.  When I deleted my albums from her library the disappeared from mine. (I think?)
    I know it's Valentine's Day, but before you get your wife fixed up the first thing you need to do is recover the deleted albums for your own library.  See if the files are elsewhere on your hard drive, or in the Recycle Bin.  When you find them, get them back into your own library.  Now you are ready to help your wife.
    As noted above, you can have two libraries in one Windows user account via the Shift-Start approach, but if you both use your libraries regularly, that becomes annoying quickly.  It is better to set her up with her own Windows user account. She can have her own iTunes library there.
    Get a copy of your entire iTunes folder to start her off.  She can delete stuff she doesn't want without messing you up.

  • Drill down more than one characteristic at the same time.

    Hi,
    Is there any way to drill down more than one characteristic at the same time?
    When I drill down by 0cust_sales I would like to have drilled down: division/distrchan/salesorg/cust_sales without having to do that one by one.
    thank you!

    Hi,
    This cannot be done unless these characterstics are related to each other in some way as Charactertics & Display Attributes.
    The reason being when you drill down the 0cust_sales , there is no link from 0Cust_sales to the other characterstics hence there is no prompt for these characterstics to be drilled down.
    However, a smiliar thing might be acheived by adding these chareacterstics into the 0cust_sales in teh query designer by dragging n dropping them over 0cust_sales. you can try this and see if this is close to your requiremetn.
    Kind Regards,
    Tapish

  • More than one reports at the same time?

    Hello
    Is there any way that i can call more than one reports at the same time through the .FMX file. At the moment i can call only one report, if i need to call another report then i have to close the 1st report, then it will show me the 2nd report. Report Background Engine can run more than one reports at the same time?
    Nametullah kalair

    Yes i know, we can submit multiple - asynchronous- jobs, but the problem is, is not possible to open more than one previewer to see multiple reports at the same time for analysis.
    Regards,
    Nametullah kalair

  • Can I sync more than one iPhone to the same computer?

    Can I sync more than one iPhone to the same computer?
    I have one MacBook pro, already have my iPhone synced to it. I want to sync my wife's to it as well so she can share my iTunes library.
    Is this possible?

    Create a new user login (with a password) for your stuff.
    This way, your data won't get mixed up.

  • Can anyone give me simple instructions on how to use more than one ipod on the same computer with itunes? Both my daughters have ipods, my wife has one

    Dear All
    Can anyone give me simple instructions on how to use more than one ipod on the same computer with itunes. My daughters have a different generation 'nano' each & my wife a 'shuffle'?
    Many thanks

    Click here for options.
    (69081)

  • HT1657 Can you rent more than one movie at the same time?

    Can you rent more than one movie at the same time on itunes?

    I think Justin is correct and you should have statistics in place and a reasonable partition scheme so that the optimizer selects the correct partitions rather than telling it what to do. You paid a lot for partitioning after all.
    There are some, possibly misguided, examples in the manuals showing how to create a view so you can delete from a single partition without specifying the partition criteria in the delete statement. This in effect turns partitioning back into DIY partitioning i.e. separate tables, union all and pretend its a single logical table using a view. But backwards.
    So to do what you want you just assume the partitions are separate tables, and then use union all to glue the ones you want back together.
    select * from sales partition (sales_q1_2000)
    union all
    select * from sales partition (sales_q1_2001)
    union all
    select * from sales partition (sales_q1_2003)
    union all
    select * from sales partition (sales_q1_2004);It probably goes without saying that as well as making the expensive version of partitioning behave like the free alternative, there is the possibility that it will perform like it as well.

  • I have more than one copy of the same song in my iTunes. Some have the icloud symbol next to them and some do not. I need to clean this up but I am afraid to delete the songs for fear I will lose them.

    I have more than one copy of the same song in my iTunes. Some have the icloud symbol next to them and some do not. I need to clean this up but I am afraid to delete the songs for fear I will lose them. Please help! On top of that my Mac keeps telling me my start up disc is full and I am deleting stuff like crazy!

    Welcome to the  Discussion Forums
    It won't be a problem if you delete your extra copies.
    I don't download very much to my tv, I do sometimes if I'm in bed but usually I do it from itunes. However if you have not fully downloaded something to the tv it is possible to start the download from itunes as well, you have likely activated 'check for downloads fin itunes in some way, could be by opening itunes, selecting 'check or downloads' from the advanced menu or that you simply have automatically check for downloads set in your prefs and it has checked coincidentally.

  • HT1719 Can more than one device access the same ITunes library?

    Can more than one device acess the same ITunes library?  And if so, does each device's list of songs remain separate and distinct for each device?

    No problems whatsoever. I have 3 iPhones and 3 iPod touches with different IOS connected.

  • How do I view more than one image at the same time in CS6?

    How do I view more than one image at the same time in CS6?

    Hi there
    If you go to Window > Arrange you can choose from several view options. Below I have selected Two-Up Horizontal since I have two images, but you can select other options if you have more than one image.

Maybe you are looking for

  • Dual External Monitor Solution

    Hello, I currently have a late-2011 MBP, which only has one Thunderbolt port for an external monitor. I am used to using two external monitors for my workflow on my Linux machine, and would like to be able to continue to do the same thing with a MBP.

  • White Screen on my Curve 8520

    My BB Curve 8520 is 3 weeks old and yesterday morning it just turned blank white with a black line in the middle of the white screen. I can receivecalls and messages but can't view them. It goes blank after it goes idle. But after sometime the home s

  • Loupe in CS5 Bridge jerky

    I have recently treated myself to the Apple iMac 27", running on Win XP Pro. I previously had the iMac 24" and on that machine I had no problems with the loupe in Bridge (CS5) which moved around very smoothly, however on the new iMac which should be

  • How can I find out what port number my DB is using

    How would one find out what port number a database is using? Is there a SQL command that will allow us to do this? Thanks, oracle_newbie

  • How add buttons in the botton of the Windows?

    Hi friends, I have a problem, How can I do to make appear a button in the bottom of the window (status_bar)? My component is called by another(like a search help - F4) and in the status bar (in the botton of the window), the opposite of title bar, I