HIS 2013 installer "set automatic log on" not working

Hello,
This was my first attempt at using this feature however when the server rebooted during the install, it did not automatically log back on (with my own credentials). Is there something else that needs to be in place for this to work?
Thanks, Jim.

Hello,
This can be a bug in the HIS 2013 Installer. I recommend you to do the restart (autologin) manually like this :
You will need to have an account with a password for this to work.
Run regedit.exe
Navigate to
HKLM\Software\Microsoft\Windows NT\CurrentVersion\winlogon
Set or create the following keys
AutoAdminLogon = "1"
DefaultUserName = Your user name
DefaultPassword = Your password
Restart and let us know if it works!
Hope this helps you :-)
Best Regards,
Steve Melan - BCEE My Blog : http://stevemelan.wordpress.com

Similar Messages

HT1338 how do i get onto face time with my computer, log in not working

I am attempting to face time for the first time on my computer. I have don it plenty on my ipad and iphone. I get to the part where it tells me that I will be logged on with my email address and it displays it correctly, but then I tells me "The server Processed an error."

HI,
Can you confirm you are using OS X 10.7.x ( a version of Lion) ?
In Mountain Lion (OS X 10.8.2 specifically) the FaceTime and Messages apps need to have the Mac's Serial Number present as it is used in creating an Auth Token that ends up in the KeyChain.
The Serial Number is "Flashed" to a Storage chip on the Logic Board by UV light when the computer is in the factory.
If the Logic board is replaced through repair or refurbishment then the number is supposed to be "Flashed" back to the new board.
Many people are reporting that this has not been done.
The issue only seemed to appear at OS X 10.8.2 (And Messages update to version 7.0.1)
10:00 PM Friday; February 1, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

[svn] 4323: Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working .

Revision: 4323
Author: [email protected]
Date: 2008-12-15 19:23:10 -0800 (Mon, 15 Dec 2008)
Log Message:
Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working.
QA: Yes
Doc: No
Checkintests Pass: Yes
Details:
* Hunting to a new channel within a channelset never triggered a disconnect from the previous channel(s). This isn't a problem in general, but does becomes a problem when an app defines two distinct channelsets containing at least one shared channel at the head of the list. In this case, the first channelset hunts past it and connects on a later channel. But when the second channelset hunts through (triggering a connect fault when it hits that initial shared channel that can't connect), the fault is processed by the first channelset as well (incorrectly).
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-544
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as

Running the script by python2 solves it for me:
su - mythtv -c "nice -n 19 python2 /usr/bin/tv_grab_nl_py --output ~/listings.xml"
Best regards,
Cedric

Automatic update does not work

On my both computers (Windows 7, Window 8), the automatic update does not work at all, although it is activated in the options. All I get in the Firefox info box is that an update is available, with a link that I have to follow to download the installation file and install it manually. No difference even if I wait for weeks, the update is neither downloaded nor installed automatically. The problem persists in all Firefox versions since version 3.6.16 / 2011 (the last update in the chronicle). Note that the automatic update seems to perform well in the Windows XP mode of my Windows 7 system !

It will update eventually; there may have been availability problems on the update servers.

My notification tone when set to 'Silent" is not working even when setup on lolipop

my notification tone when set to 'Silent" is not working even when setup .
My notification tone when set to 'Silent" is not working even when setup . It still keeps ringout . This is highly disappointing

Hello, Yes I have tested this with Android Lollipop and found that when the tone is set to silent within the BBM settings I do not receive any audible notification. Testing summary: Access the More menu - Settings - Tone dropdown and set Tone to BBM
- Send a test message and an audible notification occursAccess the More menu - Settings - Tone dropdown and set Tone to Silent
- Sent a test message and no audible notification occurs To allow us to assist further please follow the steps below to create a support ticket and submit logs. Once submitted someone will contact you to troubleshoot the issue.
1) Browse to www.BBM.com/support/blackberry
2) Locate the Need more help section is the bottom right of the page
3) Select Contact us for additional assistance
4) Complete the web form, provide as much detail as possible such as PINS involved and timestamps
5) Select Submit to create the support ticketOnce the ticket has been submitted you will receive an email with your ticket number. This ticket number can then be used to submit logs. To collect logs use the following KB:
KB35080 - "How to submit logs from BBM for Android, iPhone, and Windows Phone" - www.blackberry.com/btsc/kb35080 Thanks,
Daniel

I have an ipod touch it is either a second or third edition and i have just had to restore it to factory setting as it was not working and now the wifi on the device is no longer working. Is there anything i can do about this?

i have an ipod touch it is either a second or third edition and i have just had to restore it to factory setting as it was not working and now the wifi on the device is no longer working. Is there anything i can do about this?

Is it this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Otherwise:
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

The RAW setting in Bridge is not working. When I open Bridge I can see only icons, no images. The RA

The RAW setting in Bridge is not working. When I open Bridge I can see only icons, no images. The RAW tool icon is grey, not active. I am going on a trip Tomorrow and I need Bridge to be working. It was working earlier.

I never notied that icon before, and I've been using Bridge for 7 years.
Usually, when you have no image previews for raw files, this means that your Camera Raw plug-in is older than your camera. People always come across this problem when they use a new camera with older software.
To be sure, we need to know which camera you are using, and which version of Camera Raw. To save typing this out for the three-thousandth time, please follow this page which I wrote earlier:
http://yphotography.co.uk/articles/get-adobe-camera-raw-acr-open-photos/
This covers the subject, which is by far the most commonly asked question about opening raw files by a country mile.
If everything checks out fine, let us know. If not, give us more information and we may be able to fix this for you.
PS. Please just open one discussion per problem. There are three threads on this now. It makes it difficult to follow.

After Security updation of Windows 7 in Boot Camp (Mac Book Pro with Retina Display) on 13-Nov-2013, Windows 7 Desktop Gadgets are not working properly.

After Security updation of Windows 7 in Boot Camp (Mac Book Pro with Retina Display) on 13-Nov-2013, Windows 7 Desktop Gadgets are not working properly.
This is boot camp problem, because in other normal notebooks (e.g. SONY VAIO, Lenovo with Windows 7) the gadgets are working normally.
I am attaching the screen shot of Desktop Gadgets and Security updates of Windows 7.
Kindly solve this issue ASAP.
Shailendra Gupta
<edited by host>

You are not addressing Apple, but a community of unpaid volunteers. So ASAP won't cut it. Also, you should refrain from posting personal information (like your email address) in the body of your comments, as this is part of the community usage guidelines.
Have you reinstalled the latest Boot Camp Windows 7 drivers, just in case Microsoft overwrote some of them during the Windows 7 security update?
If you want to communicate issues with Apple about Boot Camp and OS X, click on the link. Just don't hold your breath on receiving a response.

Logging buffered not working

Hello:
In an ACE module multicontext environment the buffered logging is not working on the last context I created.
The same config though works well for another context.
The maximum size and the buffer size is showing 0 in the "show logging" below:
Thanks for helping
logging enable
logging standby
logging timestamp
logging trap 5
logging history 4
logging buffered 5
logging facility 16
logging queue 200
logging device-id context-name
logging host 10.10.10.1 udp/514
logging host 10.10.10.2 udp/514
logging rate-limit 42 60 level 0
logging rate-limit 42 60 level 1
logging rate-limit 42 60 level 2
logging rate-limit 42 60 level 3
logging rate-limit 42 60 level 4
logging rate-limit 42 60 level 5
logging rate-limit 42 60 level 6
logging rate-limit 42 60 level 7
show logging`
Syslog logging:                 enabled
Facility:                       16
History logging:                enabled (level- warnings)
Supervisor logging:             disabled
Trap logging:                   enabled (level - notifications)
Timestamp logging:              enabled
Fastpath logging:               disabled
Persist logging:                disabled
Standby logging:                enabled
Rate-limit logging:             (min - 10000 max 100000 msgs/sec)
                42 messages 60 seconds level 0
                42 messages 60 seconds level 1
                42 messages 60 seconds level 2
                42 messages 60 seconds level 3
                42 messages 60 seconds level 4
                42 messages 60 seconds level 5
                42 messages 60 seconds level 6
                42 messages 60 seconds level 7
Console logging:                disabled
Monitor logging:                disabled
        Logging to 10.10.10.1 udp/514
        Logging to 10.10.10.2 udp/514
Device ID:                      context name "CTC_PROD7"
Message logging:                none
Buffered logging:               enabled (level - notifications) maximum size 0--------------------------->>>>>>
Buffer info: current size - 0 global pool - 4194304 used pool - 4194304
                min - 418816 max - 0
                cur ptr = 0 wrapped - yes

Hi,
This is because your global pool is full. Go to one of your other contexts clear logg , and will work.
Buffer info: current size - 0 global pool - 4194304 used pool - 4194304
Dan

Photoshop SC5. What's the problem, Automate / Batch, did not work.

Photoshop SC5. What's the problem, Automate / Batch, did not work.
Message was edited by: roomus

What OS? Details?
What error message?

Sharepoint 2013 list view quick edit does not work with out remote API permissions

sharepoint 2013 list view quick edit does not work with out remote API permissions.
When I give Use Remote Interfaces - Use SOAP, Web DAV, the Client Object Model or SharePoint Designer interfaces to access the Web site it works which is not an ideal situation..
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

This is true. If you use Fiddler to watch the requests from the list view quick edit you can see CSOM calls. For example when changing a value in a cell, when you tab out you will see the SetFieldValue and Update method calls on the list item.
Blog | SharePoint Field Notes Dev Tools |
SPFastDeploy | SPRemoteAPIExplorer

I recently purchased Macbook air mid 2013. Leftside usb port is not working. I think the USB is not going inside completely. What is the solution?

I recently purchased Macbook air mid 2013. Leftside usb port is not working. I think the USB is not going inside completely. What is the solution? someone can help?

Invoke your warranty and take it back.

After ram upgrade automatic sleep is not working anymore

Some days ago I installed a second 1GB ram module in my 20" Intel iMac. After this I noticed that the automatic sleep do not work anymore. The display turns off but the iMac not. The iMac makes sounds like he wants to do to sleep but could not.
I tried everything I could find... delete OS X powermanagement prefs, run Onyx, reset the SMC.
Do anyone have an solution for this?
Thanks

Does your iMac recognize the new memory module?
Yes.
You might try reseating the module in its slot, and it
would not be a bad idea to run Hardware Test from
your install/restore DVD, just to be sure there is
not an underlying hardware problem.
Already done - no problems reported
Is your new memory module of the same specifications as the
stock module?
Yes it is the same, I had a look on this before I bought it because I wanted to use the dual-channel mode.
Also, what are your settings for sleeping your iMac?
5 min to sleep display, 10 min to sleep the mac
One other thing you may wish to
try is updating your system of OS X 10.4.6 (your
profile indicates that your a running 10.4.5).
Was updated to 10.4.6. I just forget to change the forums pref
I more thing to mention when I start the sleep mode manually everything is fine. I also tried to disconnect all external USB/Firewire hardware and tried it with a fresh mac os install on my USB HDD.
Nothing helped.
Thanks

Microsoft Outlook 2010 & 2013 cannot set automatic reply settings

Hello,
We cannot seem to set automatic reply's within outlook 2010 & 2013. We have an exchange server 2010. We
can setup automatic reply through OWA absolutely fine. The error that we receive is 'Your automatic reply settings cannot be displayed because the server is currently unavailable. Try again later.
However we can setup out of office on any other office version below 2010 fine. We have run through
a number of tests and have come to the conclusion that the auto discover service is not configured correctly. I have been told to run through the following
"We need to make sure the IIS service is assigned to the certificate which includes mail.mydomainname.co.uk
name:
Enable-ExchangeCertificate -Thumbprint 62C247B3BD081D0A8B074D4A928A76E6DA3BABBA -Services
POP,IMAP,SMTP,IIS
Then restart IIS service
to apply the changes.
If the user is connect
to mailbox from external environment as your test results, it is recommended to add the autodiscover.mydomain.co.uk name in your certificate with IIS service. If so, the autodiscover
service can be accessed successfully in your posted second steps(https:/autodiscover.mydomain.co.uk/autodiscover/autodiscover.xml). Alternatively, if you don’t want to change your certificate configuration, we need to create a new SRV record for mail.mydomainname.co.uk
to make your autodiscover succeed in last steps of Srv Record lookup method".
So I followed this and opened Exchange Managemnet Shell and ran the following.....
'Enable-ExchangeCertificate -Thumbprint 62C247B3BD081D0A8B074D4A928A76E6DA3BABBA -Services POP,IMAP,SMTP,IIS'
The following output was displayed:
"VERBOSE: Connecting to SERVER2011.EXCHANGE.local
VERBOSE: Connected to SERVER2011.EXCHANGE.local.
[PS] C:\Windows\system32>Enable-ExchangeCertificate -Thumbprint 62C247B3BD081D0A8B074D4A928A76E6DA3BABBA -Services POP,I
MAP,SMTP,IIS
WARNING: This certificate will not be used for external TLS connections with an FQDN of 'SERVER2011.EXCHANGE.local'
because the CA-signed certificate with thumbprint '71ADF367E190E269C1036BBF4A09C55E62536791' takes precedence. The
following receive/send connectors match that FQDN: Default SERVER2011.
WARNING: This certificate will not be used for external TLS connections with an FQDN of
'mail.companyname.co.uk' because the CA-signed certificate with thumbprint
'67ECB1A383CBD05424C58F6A5E753C9377F49D3D' takes precedence. The following receive/send connectors match that FQDN:
Windows SBS Internet Receive SERVER2011, Fax/Printer.
Confirm
Overwrite the existing default SMTP certificate?
Current certificate: '67ECB1A383CBD05424C58F6A5E753C9377F49D3D' (expires 09/08/2015 09:06:17)
Replace it with certificate: '62C247B3BD081D0A8B074D4A928A76E6DA3BABBA' (expires 06/08/2015 17:05:22)
[Y] Yes [A] Yes to All [N] No [L] No to All [?] Help (default is "Y"):"
I opened up 'Internet Information
Services (IIS) Manager to find 2 Server Certificates issues to 'mail.companyname'
with the certificate hash' 62C247B3BD081D0A8B074D4A928A76E6DA3BABBA' and '71ADF367E190E269C1036BBF4A09C55E62536791'.
I opened up the Exchange Management
Console to confirm that the IMAP, POP, IIS, and SMTP services are bound to both of the certificates for 'mail.companyname'.co.uk
I need to know if it is okay to proceed in replacing the certificate and running this
command.
Thank you

Hi,
We have this problem with some of our users, in that they get the server unavailable error when trying to activate the out of office.
In our case this is because the Proxy is blocking the connection from the PC to the Exchange, so we just go to Internet Options - Connections - LAN Settings - Advanced (under proxy server) then just add *.domain.com into the Exceptions box at the bottom.
This seems to resolve the issue and allow them to set their out of office. The only reason this reoccurs for these users is because their roaming profile for some reason won't save the proxy settings, which is a different issue.
Hope this helps.

Set up Search Service App For SharePoint server 2013 on Windows server 2012 R2 not working

Hi all,
I installed SharePoint server 2013 on Windows server 2012 R2 using VirtualBox. I created a DC(domain controller) server with a domain set up on one VM and it has SQL server 2012 SP1 installed. Then SharePoint 2013 on another VM was set up to access
the DC server. Everything seems working except Search Service App which cannot be sucessfully set up. Creation process for Search service app says Successful and 4 search databases were created and look fine. But when I navigate to search service app
admin page, it gives error info:
System status: The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '386f2cd6-47ca-4b3a-aeb5-d9116772ef16' in search application 'Search Service Application 1' is in
a good state and try again.
Search Application Topology: Unable to retrieve topology component health states. This may be because the admin component is not up and running.
From event viewer, I see following errors:
(1) Error From source: SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance
(b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
   at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
   at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean
isAdministrationServiceJob)
(2) Error From source: SharePoint Server Search
Could not access the Search database. A generic error occurred while trying to access the database to obtain the schema version info.
Context: Application '386f2cd6-47ca-4b3a-aeb5-d9116772ef16'
(3) Warning from source: SharePoint Server Search
A database error occurred. Source: .Net SqlClient Data Provider Code: 8169 occurred 0 time(s) Description: Error ordinal: 1 Message:
Conversion failed when converting from a character string to uniqueidentifier., Class: 16, Number: 8169, State: 2    at
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
(4) Error From source: SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance
(b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have been upgraded.
Technical Support Details:
System.Runtime.InteropServices.COMException (0xC0041235): The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have
been upgraded.
Since separate DC server and SharePoint server do not work, I installed SharePoint 2013 on DC server ( so DC server has everything on it now ) but it gives exactly same result. Later I installed SharePoint 2013 SP1 and still have the same problem with Search
Service app. I spent two weeks tried all suggestions available from Web and Google but SharePoint Search Service simply does not work. Config and other databases work but why Search Service has this issue seemingly related to search DB.
Could anybody please help out? You deserve a top SharePoint consultant award if you could find a solution. I am so frustrated and so tired by this issue.    This seems also to be a SP set up issue.
Thanks a lot.

Using new Search Service App wizard to create SSA is always a success. I could delete existing SSA and recreate it and no problem. It says successful but when I open Search Admin page from CA, it gives me errors as mentioned.
Now I used the following PS script for creating SSA from Max Mercher, but it stays at the last setps in following script:
Add-PsSnapin Microsoft.SharePoint.PowerShell -ErrorAction SilentlyContinue
$IndexLocation = "C:\Search" #Location must be empty, will be deleted during the process!
$SearchAppPoolName = "SSAPool"
$SearchAppPoolAccountName = "mydomain\admin"
$SearchServiceName = "SSA"
$SearchServiceProxyName = "SSA Proxy"
$DatabaseServer = "W12R2DC1"
$DatabaseName = "SSA"
$spAppPool = Get-SPServiceApplicationPool -Identity $SearchAppPoolName -ErrorAction SilentlyContinue
if (!$spAppPool)
$spAppPool = New-SPServiceApplicationPool -Name $SearchAppPoolName -Account $SearchAppPoolAccountName -Verbose
$ServiceApplication = Get-SPEnterpriseSearchServiceApplication -Identity $SearchServiceName -ErrorAction SilentlyContinue
if (!$ServiceApplication)
# process stays at the following step forever, already one hour now.
$ServiceApplication = New-SPEnterpriseSearchServiceApplication -Name $SearchServiceName -ApplicationPool $spAppPool.Name -DatabaseServer $DatabaseServer -DatabaseName $DatabaseName
Account mydomain\admin is an farm managed account, domain admin account, in WG_ADMIN role, It is in all SQL server roles and is DBO. I see search DBs are already on SQL server. From Event viewer, I got following errors in sequence:
(1) Crawler:Content Plugin under source Crawler:Content Plugin
Content Plugin can not be initialized - list of CSS addresses is not set.
(2) Warning for SharePoint Server Search
A database error occurred. Source: .Net SqlClient Data Provider Code: 8169 occurred 0 time(s) Description: Error ordinal: 1 Message: Conversion failed when converting from a character string to uniqueidentifier., Class: 16, Number: 8169, State: 2
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
(3) Error for SharePoint Server Search
Could not access the Search database. A generic error occurred while trying to access the database to obtain the schema version info.
Context: Application 'cbc5a055-996b-44a7-9cbc-404322f9cfdf'
(4) Error for SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have been upgraded.
(5) Error Shared Services for SharePoint Server Search
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
   at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
   at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob
Above errors keep being generated. Last step for SSA creation stay there forever. Any clue what is really going on? Thanks.

HIS 2013 installer "set automatic log on" not working

Similar Messages

Maybe you are looking for