HIS multi-view ii software not working with OS X Yosemite

Hi all,
I just installed OS X Yosemite on my MacBook Pro and now my external moniter is essentially non-functioning (the display is streaky and goes in and out). I'm pretty sure this is due to the driver for the external display (HIS mulitview ii connected to an HP Pavailion 20xi monitor) is not up to date. Unfortunately it doesn't look like HIS has released updated drivers and they're located in Hong Kong so I'm having a tough time getting through. Any suggestions for a possible workaround until the new drivers are released?

Hi,
The original CD is intended for older versions of the operating system, not for Yosemite.
The software for your proiduct is available via Apple Software Update, simply plug the USB or connect the printer to your network.
Next open System Preferences > Printers & Scanners and click the plus sign to add the printer.
Once you are done, I would sugget running Software Update to ensure the drivers are fully up to date - from the Apple menu click on Software Update.
Clcik the Store Menu and click on Reload Page, then be sure to install any listed HP or Apple update and you are good to go.
If you need, you may find a more detailed instruction about installing the software below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04469325&lc=en&cc=us&dlc=en
Scanning can be done as listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04467713&tmp_task=useCategory&cc=us&dlc=en&lc=e...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Why Does Live View In DW Not Work With BC Template?

The live view using a BC template in DW CS6 shows "PAGE NOT FOUND" in the body section but the header and footer look fine. I should also point out that the index.htm page works fine, it's just the other pages that have this problem. What makes it weirder is that the site works fine in all other modes including when viewing in a normal browser, it's ONLY when in live view! I also noticed that if I delete the .htm extension in the url in the DW browser when in Live View it fixes the problem, but this requires me to do this everytime I want to switch to live view and surely is either a problem with how the BC template files are named or DW CS6 is buggy? Hopefully this is an easy one to answer??

Hi Alex,
Thanks for your reply, I have done a video demo at http://screencast.com/t/RsutrvoFn0xZ
Date: Thu, 14 Feb 2013 05:49:55 -0800
From: [email protected]
To: [email protected]
Subject: Why Does Live View In DW Not Work With BC Template?
    Re: Why Does Live View In DW Not Work With BC Template?
    created by Alex Pavelescu in Dreamweaver & Business Catalyst - View the full discussion
Hi, Please provide the site url, and if you can, a video demo of the issue you're facing, using http://www.techsmith.com/jing.html, where you could also display the way you have your side setup ( Dreamweaver menu > Site > Site manager > http://screencast.com/t/GqqBk9MY4ck ) Kind Regards,Alex
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5072585#5072585
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5072585#5072585
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5072585#5072585. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver & Business Catalyst by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Cannon 8800F not working with OS X yosemite 10.10.1 . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

cannon 8800F not working with OS X yosemite 10.10.1 . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

Have you done any of the following?
http://support.apple.com/kb/PH18614 OS X Yosemite: Reset the printing system
Repaired permissions & restarted your comp after the installations of the drivers?
Sometimes, installing the GIMP drivers help with printing issues: http://gimp-print.sourceforge.net/MacOSX.php
What to do when you can't print
=============
not working with OS X yosemite 10.10.1
Per your profile
Mac OS X (10.7.3)
Conflicting info: Please update/correct your profile so that you can receive the correct troubleshooting suggestions. This will assist the users in trying to help you. Thank you.

Why is elements 12 not working with OS 10 yosemite Editing tools aren't working like they used to.????

Can someone tell my why Elements 12 photo editing tools wont work with OS 10 Yosemite?

duplicate, see:
why is elements 12 not working with OS 10 yosemite Editing tools aren't working like they used to.????

HP Scan 3 software not working with MacOS 10.9 Mavericks

I just bought a new iMac to replace my old iMac and updated toe mew Mac to 10.9 Mavwericks. Now my HP Scan 3 software does not work and there is no update for this software that I can find. Can anyone help getting updated HP scanning software to use with Mavericks. Thank you.

Thanks for your reply. I tried what you suggestsed and it did not work. My printer was listed. The website says it is for MacOS 10.8 and Mavericks is 10.9. My printer prints fine. The problem is with the HP Scan 3 software. When I try to use it I get a dialog box that says check withn the developer as it does not work with my OS. Also, I went to the firm ware updater in my HP utilities folder and trie to run that. I got a message saying that there is no update for my device.
It is hard to believe that HP has not updated the scan software to work with Mavericks.

Adobe cs6 apps not working with OS X Yosemite

Illustrator and After Effects are not working with OS 10.10.1 After Effects opens into and is stuck in Render Queue. Illustrator says it need a previous version of java. Im a little nervous about going with a older version of java on my new machine
Ps, Pr and Au seem to be working ok so far.
Any Ideas??
Thanks, Mike

I am having the exact same problem with After Effects (13.1.1.3) OSX 10.10.1. Renders lockup in the render queue hanging on frame 2.
Whats the deal Adobe?
If your going to push updates to customers all the time, your software has gotta be solid.
I now have a client project that I can't render and I can't open in previous versions of AE either.
Yours truly,
Screwed.

Adobe Flash Player not working with OS X Yosemite

Since I upgraded to the latest version of Yosemite, flash player will not work with any browsers. The latest version is: 10.10.2 (14C109).
When I install flash player all browsers crash or if I try to use them with anything that needs flash player, i.e. YouTube, etc. The only way I can use my browsers if I uninstall flash player.
Yes, I've tried using the latest adobe update, it does not work. Yes, I've tried uninstalling and re-installing, it does not work. I'm at loss right now and puzzled, because I've encountered this issue in the past, but never this severe.
Can someone help me please ???

From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Close the window. Then select
           ▹ System Preferences… ▹ Flash Player ▹ Advanced ▹ Delete All...
In the sheet that opens, check the box marked
          Delete All Site Data and Settings
then click Delete Data. Close the preference pane.

Discoverer Viewer/Plus does not work with Custom EUL owned by APPS user

I am facing a unique issue with one of my customers. They have a custom EUL named XX_EUL_US and this does not allow connecting through discoverer viewer or discoverer plus.
I have worked with custom EULS before at other customers and this was never the case. I am being told that this issue is happening as the EUL owner is APPS instead of some other user. Is this the case? Can discoverer viewer not be used with EULs owned by apps user?
Please not that the Default EUL in ICX profiles is set to this EUL and no other EUL profiles are set.
Appreciate any thoughts on this.

Hi,
I am not sure what you mean when you say you have a "custom EUL named XX_EUL_US". The EUL table should be created in a schema named XX_EUL_US. This will then be the EUL owner. You will then need to connect to Discoverer Administrator as the EUL owner and grant privileges to Apps users and/or responsibilities.
The user should then be able to connect to Discoverer Plus/View using their apps username, responsibility and password.
To be able to connect directly from an apps menu you need to have the ICX parameters set correctly. The ICX: Discoverer Default End User Layer Schema Prefix should be set to XX_EUL (without the _US). The ICX: Discoverer End User Layer Language Override should be set to US or not set at all.
Rod West

Apple scanner software not working with HP

HP claims that the Apple Scanner Software on PowerBook is not working properly with the HP scanner

Is this a question about the scanning software in the MacBook Pro computer shown
in your post's lower boundary area, or do you have a PowerPC G4 PowerBook, too?
There may be a newer or alternative driver for a recent version of OS X, that the
older obsoleted PowerBook can't run; but a later supported MacBook Pro, can.
Issues with Apple products, software or hardware that may elicit comment,
can be addressed to Apple Feedback... in case you want to tell them direct.
Mac OS X - Feedback
If you have posted in the vintage/obsolete PowerBook notebook ASC discussion,
by accident, Hosts could relocate this thread to one more appropriate, on request.
You may have to look into alternative drivers or software for scanners, if whatever
Mac you are using with the HP scanner is unsuitable. The older PPC based Macs
can't run an OS X version past Leopard 10.5.8. With a later MacBook Pro running
Mavericks OS X 10.9.4, you may have difficulty if HP does not support it...
Drivers for current printers & some scanners may be included in Mavericks; but
for users of older printer/scanner/copier all-in-ones, bits may be left behind. If
the HP product is older, a different version HP scanner driver may work. There
are a few open source drivers available, however I do not recollect the web site.
Please make clear what version HP product, which Apple computer portable, and
what OS X version, your discussion actually pertain to. Some users refer to a
MacBook/Pro as a PowerBook; and for a time, a MacBook as an iBook. Oh well.
{edited & re-posted -- after accidental reference to an unreleased software version}
Good luck & happy computing!

MSGTAG Software not working with K8N Neo LAN Port

Greetings All,
I'm having a problem using a message receipt service called MSGTAG (http://www.msgtag.com) It works with Microsoft Outlook and while it still uses Port 25 for the SMTP server, it also creates Port number 7362 to "listen" for when the recipient opens the e-mail and sends a receipt back to the originator. This service will not get past the LAN port on the K8N Neo Platinum board. Outlook just hangs until an error message pops up saying a connection to the smtp server was interrupted. I thought it might be the nVIDIA firewall software, so after opening up to correct ports, it still won't work. I then uninstalled the firewall all togther, but still no luck.
I'm running all the latest MSI and nVIDIA drivers.
I should note that as soon as I enable my PCI NIC and use that, everything is fine.
Anyone have a suggestion? MSGTAG tech support wasn't much help.
Much appreciated.

Looks like I finally figured it out. In the nVIDIA ForceWare interface under Ethernet Settings---->Advanced Configuration--->Checksum Offload, uncheck the box that says "TCP Transmit Checksum Offload" and hit "Apply" and now it works!
I have the overall Firewall set to "High" profile, and now the only two websites that don't come up at all are http://www.extremetech.com and http://www.netflix.com . I've seen postings in here before about Netflix. Does anyone has an easy answer as to what source code these two websites have in common that would make this firewall block them?
The only firewall setting I can find so far that allows them to load is "Off". I could drop it each time I guess, but there has to be another way.
Thanks for any help you can give!

Iphoto will not work with OS X Yosemite

After I upgraded to the new OS X Yosemite iPhoto no longer works, why? I deleted it and re-installed it and it still will not work. I have been using iPhoto for all my pictures and now i can access the pictures..... Help please ????

Got it, Apple people helped sort it out for me, thank you kindly.

Problem with multi take drum tracks not working with group selection editing

HI All
Ive recently tracked drums into using 7 mics and doing multiple takes layered on top of each other, the 7 takes belong to the same group and i have enabled group editing in the settings.
I think i changed the comp options at the end of the track and as a result audio tracks 1 and 2 edit between takes together fine. I.e. when i choose say take 5 with track it does the same selection for track 2.
Tracks 3-7 work in the same way fine, im just wondering if anyone knows how to get them as a complete group again so that when i choose take 5 for example on the one audio track, it will make the same selection for all of them!
thanks

Colin,
I did a multi camera edit of Act 1 of a taped performance and all went well. Moved on to Act 2, which ran longer and each camera needed a tape change. So I matched the clips from each camera on each video track and tried to move on to the sync & then create a multi camera sequence stage of the project. That's when I hit a road block. I could not sync the four video tracks. So I consulted Adobe's on line help and this was all I could find about my predicament:
Note: Adobe Premiere Pro uses an overlay edit when synchronizing clips. Take care not to overwrite adjacent clips if you have multiple clips on the same track.
So what was I to do next? I found your post and now know exactly what to do. Thanks for a great explaination and saving me a lot of head scratching.
Why couldn't Adobe explain it as well?
Thanks,
Angelo

Satellite U200-161 Fingerprint software not working with IE7

Seems like the fingerprint facility for registering passwords is no longer working once ie7 (final) is installed.
Anyone else have this problem or is it just me?
Thanks
Nick

Hi
I have never ever used the Fingerprint utility but possibly you have to set the user settings in the finger print software management again.
I think if you have updated the IE to version 7 so you have to refresh the settings in the Fingerprint utility.
Im not sure if it will help you but you can try it and please give me a result.
bye

My Adobe After Affects 12.0 is not working with OS X Yosemite 10.10.1 - Need Assistance

Is there a update or patch to fix this?
Your feedback is greatly appreciated!

Install the update:
After Effects CC (12.0.1, 12.1, and 12.2) updates

Since Reader X previous view tool not working with linked documents

We have many linked pdf documents. After upgrading to Acrobt Reader X we can´t go back to the parent document by using the "previous view" command. In older versions we can use this function to navigate back. Is there an option in the preferences to reactivate this possibility?

I have been told by Adobe support that this is not a bug, but a security feature.
Our company has, over many years, developed for our most important software application a PDF help system with hundreds of books and thousands of pages. There are myriad links between and within the books. In order to make navigation through this morass easier, we have provided our users a starting "Main Menu" with links to the books. We also set it up so that only one PDF is open at any given time ("open in same window" option), otherwise a user could end up with hundreds of open PDF documents on their taskbar or desktop. We also have our users take advantage of the "Previous View" mechanism to make it easier to navigate while keeping only one window open at a time. (The browser "Back" button trick will not work with PDFs that have been closed).
However, Since version X of the Reader, the Previous View mechanism will not work with PDFs that have been closed. That is, you can only get back to a previous view in another PDF if it is still open. As mentioned above, this could leave our users with hundreds of open PDFs, and thus it is not an option for us. But Adobe has ignored our pleas.
You must vote with your feet; that is all Adobe understands. Adobe does not care about our needs and we have given up on them. We are currently telling our users:
"If you use a non-Adobe PDF reader, you will be able to install it on a system alongside any version of Adobe Reader, including version 10. We have found that Tracker Software makes an excellent free product called PDF-XChange Viewer, which may be downloaded HERE. PDF-XChange has a smaller footprint, is faster, and has more features than Adobe Reader, including a 64-bit version for Windows XP/Vista/7.
To set up this program to optimally use our help system, go to Preferences, and under "General," specify that the Documents Layout be Single rather than Multiple. Then you will be able to use the Alt keys with the arrows, or the Previous/Next View buttons on the toolbar, with closed PDFs."

HIS multi-view ii software not working with OS X Yosemite

Similar Messages

Maybe you are looking for