Hiss...Problem & Solution (for me)

I was trying unsuccessfully to eliminate hiss from audio recording, unsure if it was mic, mixer, cables, sound card, software-related or what. I have been using both line-input and USB input devices. My old mixer died and I took my laptop to the music shop and tried a bunch of options. The USB-connected M-Audio external sound card created just the same hiss. The line-input mixers produced NO hiss (at least not the Compact 4 that I got). Beware USB input for audio.

I'm using the sound card in my 12" PowerBook and, with the Compact 4, it gives me very good sound. I noted hiss when using the USB Griffin i-Mic as well. The USB issue may well be a function of the laptop...however, I have seen other posts on the web remarking about USB-related hiss. For what it's worth, I wanted to share my experience so that others may not have to bang their heads against the wall trying to figure everything out as I did. I do not claim that my posts are the final answer...just my answer.
Thanks for your responses.
Regards,
Ron

Similar Messages

Sync problem solution for iphone.

Problem:Sync is not working with iphone and itunes after i uninstalled and installed recently.
One reason and solution for the above problem is below.
Solution:Hi, I faced similar problem when I uninstalled itunes and installed updated one recently.After several analysis i found that antivirus software is blocking this device.What I did is I uninstalled my antivirus software and then when I connect iphone then sync works.May be it could be the same problem..check it out.

This is also covered in this help article: iTunes for Windows: Troubleshooting security software issues
http://support.apple.com/kb/TS3125

PPPoE problem - solution for review

I'm posting this to save others the search after I troubleshot a painful issue, which wiser types may be able to clarify the background.
Equipment: DLink DSL 504T Gen II; MBP 2008; AEBSdual-n 2009
Problem: Set up new AEBSdual-n, set up security, PPPoE to bridged modem and accept all default networking settings. With correct username & p/w, AEBS fails to authenticate, flashing yellow and generally not responding to Airport Utility very well, even by wired connection...
Solution: Noticed that default DHCP prefix in Airport is 10.x.x.x which is the same ilk as the Dlink DSL 504T. Wonder if the subnets are clashing or something. Try changing DHCP prefix given out by AEBS to 192.168.x.x and all works fine. Note that to achieve this I had to hard reset (power and reset button at once) to restore default settings.
Those wiser than me can look at the reasons, but I wanted to post a likely solution for many others I've read when researching the problem.
Cheers,
Tim
Message was edited by: Tim Groves for clarity

I tried the same and the opposite happened. If I left it as 10.XX it worked fine

Is there a solution for my "files in use" installation problem with Adobe Reader XI?

I have tried repeatedly to download Adobe Reader XI (11.0.07), but I keep getting a "files in use" message that indicates my current version, Adobe Reader 8.1, is using files that need to be updated by the download's set up. The message directs me to close my Adobe Reader 8.1 and then continue, but when I receive it my Adobe Reader 8.1 is always closed. I am tempted to uninstall my Reader 8.1 and then try downloading Reader XI, but I am afraid I could be inviting even more trouble. I should mention the reason I am trying to download Reader XI is a notification I received in my computer's status box that indicates my Reader 8.1 is not working properly and suggests I download the latest version. I discovered the notification after I was unable to open a GIF file attachment. Does anyone have a solution for this problem?

Thanks for your reply.
I tried to uninstall my Adobe Reader 8.1 in safe mode, as suggested above, but received a message which indicated that Windows installer could not be accessed. That was a strange message, because I have not had problems uninstalling programs in the past, and, after receiving the message, I tried uninstalling a different program in safe mode and had no problem doing so. I am now going to try your suggestion.
Honestly, these types of technical issues always leave me so frustrated. I do not have a high technology acumen, and because my laptop is six years old, I cannot get professional help without paying a hefty fee. Thank goodness for this forum. If the solutions suggested here do not work, I guess I will keep my laptop until my Adobe 8.1 gives out completely.
Thanks again for your assistance. I will let you know if it works.

Does anybody have a solution for the NAT problem?

Is somebody's application or Applet able to play any RTP stream behind a NAT Router? Can anybody establish any kind of connection / broadcasting between two subnets? I've got my RTP-Transmitter@public IP (using RTPManager...SendStream.start()), and I try to receive the stream from my local network which is behind a router (DHCP: 192.168....).
I read forums, newsgroups, looked for any solution for days all over the web but I've found nothing. Zero.
What's the secret? Any hints?
Best regards from Munich / Germany,
r.v.

Hi
I have the same problem.
I have one appletTransmitter that capture video from webcam and transmit it to other client on internet.
I try to transmit medialocator from appletTransmitter to servlet1 and then save MedialLocator as servlet attribute, then other client can connect to servlet2 that send saved MediaLocator to appletClient.
APPLETTRANSMITTER:
URL url=null;
MediaLocator media=new MediaLocator("vfw://0");
try{
url = new URL("http://localhost:8080/servlet1");
catch(MalformedURLException mue){mue.printStackTrace();}
URLConnection conn=null;
try{
conn = url.openConnection();
catch(IOException ioe){ioe.printStackTrace();}
conn.setDoOutput(true);
OutputStream os=null;
ObjectOutputStream oos=null;
InputStream in=null;
ObjectInputStream iin=null;
MediaLocator mResp=null;
String r=null;
try{
os=conn.getOutputStream();
oos=new ObjectOutputStream(os);
oos.writeObject(media);
//oos.writeObject("Prova Servlet");
oos.flush();
catch(IOException io){io.printStackTrace();}
catch(ClassNotFoundException cn){cn.printStackTrace();}
SERVLET1
ObjectInputStream objin = new ObjectInputStream(request.getInputStream());
MediaLocator ml =null;
try{
ml = (MediaLocator) objin.readObject();
context.setAttribute("media",ml);
catch(ClassNotFoundException e)
{e.printStackTrace()}
But on servlet1 there is a ClassNotFoundException: MediaLocator
What do we think about the solution and exception problem?
Best Regards,
Nico from Italy

TA24002 My 500 GB can't verify nor repair. I have photoshop work that I need to recover. I would like to know which erase option would be the best solution for this problem.

My 500 GB can't verify nor repair. I have photoshop work that I need to recover. I would like to know what option would be the best solution for this problem?

You appear to have two issues: 1) a hard drive that is not working properly and 2) files you wish to recover.
Re 1) you need to answer Kappy's questions.
Re 2) does the drive load and can you see your photo files? If so can you copy them to another drive?
Do you not have a backup of the photo files?

I have problems in the initiation of the Encore process when opening presents the following error message : "Encore CS6 Cannot Run in Non-Royalty Serialized".... What is the best solution for this problem ?

Help Me.
What is the best solution for this problem ?

Encore is activated when you activate Premiere Pro... so, as Stan asked, how did you install P-Pro?
Ask for serial number http://forums.adobe.com/thread/1234635 has a FAQ link
-and a fix for Encore http://forums.adobe.com/thread/1421765?tstart=0 in reply #7
-plus more Encore http://helpx.adobe.com/encore/kb/cant-write-image-fie-larger1.html

My solution for the "Error -50" and/or "Syncing" problem

Hi
After upgrading to iPhoto 5.0.2 I also had the "Error: -50" problem"
How have I solved this problem => also with the help and tips from other forums.
Before the upgrade all my pictures from iPhoto were available on my iPod Photo (30 GB)
After the upgrade of iPhoto to 5.0.2 I received the "Error: -50" every time I tried to synchronize my iPod. Strange, strange, strange, ...
=> first I detected that putting pictures on my iPod starting from a folder (in stead of iPhoto) worked fine.
Trying to change back to iPhoto did not work and no albums where available in the iPod Options view!
=> then I tried to create a new iPhoto library (press and hold Option(alt)-key while starting iPhoto), put some pictures and albums in it ... and even this did not work.
What did I do to solve this problem!
1. I thrashed my iPhoto application (DO NOT empty you trash, because you have to put it back again)
2. I used "Disk Utility" to repair the disk permissions.
3. I put back my iPhoto application from the thrash (same location as before - Applications folder)
4. and did again a "repair disk permissions"
5. then I tried to sync my NEW iPhoto library on my iPod and EUREKA this worked.
6. Then I switched back to my original iPhoto library (launch iPhoto holding the Option key).
7. Tried to sync ... again the same problem => no pictures and albums available in the iPod - Optoins - Photo tab.
=> conclusion : the problem has to be in my iPhoto library
8. after trying many things (such as eliminating albums => trail and error method) I found the cause for my problem.
=> I used KEYWORDS in my iPhoto library with strange characters and had SMART albums using it. In my situation it was the "&" character.
Replacing or removing this character solved my problem. All my pictures and albums were available in the iPod - Options - Photo tab
9. Sync could be started ... Youpi!
After synchronizing my iPhoto library I noticed that not all pictures were available on the iPod. I start looking which pictures that were missing on my iPod. When I found them I wanted to know why they were not synchronized.
I found the explanation in the file "AlbumData.xml" in the "iPhoto Library" folder.
If you open this file with TextEdit and search for this missing file then you'll find that (at least in my case) corresponding path does not exist (any more). And that was the case for each missing file!
How solving this problem?
1. I tried rebuilding the iPhoto Library => launch iPhoto holding the Option and Command keys. This did not work.
2. What did I do?
2.1. First I exported all my Pictures from the active iPhoto Library (Share - Export)
=> VERY IMPORTANT NOTE : all extra info such as "Key words", Albums, ... will NOT be saved!
2.2. I created a new iPhoto Library (launch iPhoto holding the Option key)
2.3. Then I imported all exported pictures.
=> if you check the file paths in the AlbumData.xml file, you'll see that this info is correct!
2.4. At least I recreated (manually) all "Key words", Albums, ... so I had a duplicate of my original Library.
I hope this also works for other people with the same problem.
Greetings
P@nt@ni

Here my solution for the itunes' "unknown error -50" and not showing any albums in the prefs' tab:
1. All rebuilding options in iphoto didn't resolve the problem.
2. I opened the file "AlbumData.xml" in the iPhoto-Library-Folder with a text editor. I figured out, that the problem wasn't in the Albums, but in the "Master Image List"-Section. They look like this:
<key>1741</key>
<dict>
.. titles, filenames, ....
</dict>
After making a backup of this file, I started deleting entries here (you know, the fastest way to do it is to split it always in halves and check in iTunes if the error still exists). After about half an hour I got the problem key.
3. The problem was: Some (curious) white spaces at the BEGINNING of the comment! Curious, because they weren't visible in iPhoto's comment, but I could delete them in Iphoto! I guess they weren't normal space characters, but any special symbols (line feeds? whatever)
4. After that, the -50 error was gone. Now I could see the Album Names. But the sync stopped after a while with a "... file not found...." - error.
5. Again, with trial&error I found out, that 4 pictures in the last 3 months' rolls made this second problem: I just duplicated them in iPhoto and deleted the original ones. So I still don't know why they have produced this error... anyway,
6. Now all of my photos sync well.
.. well, the whole story took me 2 evenings. I really didn't switched to Mac to play debugger for Apple. Do they read these groups here or do I better write them anywhere? They should get those problems fixed asap! As far as I read in the groups, those errors do exist quite a long time?!
My versions:
iPhoto 5.0.4 (263)
iTunes 5.0.1 (4)
OS X 10.3.9
iPod Nano 1.0

I bought my iphone 5 in Houston Texas May 15 2013 IMEI Nr. 013428009645399.The problem is that in the Greece the country which I live the 4G is not working.If you have any solution for this problem pls. let me know.My email is philcoueth@yahoo.gr Thank yo

I bought my iphone 5 in Houston on May 15 2013.
IMEI 013428009645399.The problem I have is that in the country
which I live GREECE the 4G is
not working.Please if you have any solution for this
problem let me know.My email is [email protected]
Thanking you in advance
Philip Couridis

iPhones purchased in the US are NOT guaranteed to work with 4G bands outside of North America.
For what crazy reason did you purchase an iPhone in the US if you live in Greece? If your phone needs servicing, it will have to be brought back to the US. You cannot get that phone serviced in Greece.

What is teh best solution for my Problem??

hello everyone
i'am planing to develop a Patient Management System (PMS)
since i 'm not that guru in the J technologies i would like you to get me some help with this decision:
what is the best solution for developeing an intranet "PMS" which should handles data (connection to postgresql) and runs some algorithm (for planing puropose) im background ??
1 developeing a web based solution (servlet and jsp and and ..)
2 developeing an application wich will be manging everything ??? (a kind of programm with its own GUI)
3 you may have an other idea solution and ill be gald for any advices
ps sorry for my english its not that great ;)

Web applications are all the rage these days and IMO rightly so as they greatly reduce deployment cost and headaches.
They do have some drawbacks though which for you might be important.
I can imagine that sooner or later (probably sooner in my experience) a requirement to interface with hardware installed on the client machines will emerge.
Whether this is a barcode scanner or a chipcard reader to get client information from some form of card issued to the client, or maybe a label printer to print out labels for medication bottles doesn't matter, you need to access the client machine directly.
Web applications have great difficulty with that (in fact, it's all but impossible).
You could go for an applet solution but that's contrived at best and still leaves the same problems.
So in your situation an old-fashioned client/server application (maybe using web services to communicate with the serverside application) is likely the best longterm solution.
You'd have the database remote so everyone has access to the same data, being accessed through processes run on the server and called by the clients. These can also do most of the business logic, leaving the clients relatively dumb responsible mainly for data validation and entry and presentation of the results.

A solution for Secure Static Versioning problem in 1.5.0_10

Hi,
I have JRE 1.3.1_09 and 1.5.0_10 on my computer and I think I have solved static versioning problem.
My test computer:
- Windows XP sp2
- Internet Explorer 7 (on another computer also IE 6)
- Firefox 2.0.0.1
- JRE 1.3.1_09
- JRE 1.5.0_10
I. Solution for Internet Explorer 6 and Internet Explorer 7
1. Edit registry and add:
HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Deployment\Policy
DWORD: EnableSecureStaticVersioning = 0 (Hex)
2. Restart browser if started.
3. Start web page with java applet.
II. Solution for Firefox 2.0.0.1:
1. Install 1.3 JRE in the same parent directory as 1.5 JRE.
Because default default installation path for 1.5 JRE is C:\Program Files\Java\jre1.5.0_10 you need to modify
1.3 installation path from default C:\Program Files\JavaSoft\JRE\1.3.1_09 to C:\Program Files\Java\jre1.3.1_09
After installation check out that "bin" directory is in the following path:
C:\Program Files\Java\jre1.3.1_09\bin
2. Install 1.5 JRE in default installation directory: C:\Program Files\Java\jre1.5.0_10.
After installation check out that "bin" directory is in the following path:
C:\Program Files\Java\jre1.3.1_09\bin
3. Restart browser if started.
4. Start web page with java applet.
Note: HTML page must use <object> tabs for Internet Explorer or <embed> tabs for any other browser (e.g. Firefox). You need to specify correct classid in object and/or embed tag.
P.S. If anyone would like to discuss with me send me an e-mail to [email protected], but please post question to forum and just mail me a link to forum. I will write my answer to forum.
Hope this helps,
Grofaty

I have been trying to find a solution for this issue at our organization for over 6 months. Finally, we have a work around to run multiple java versions for newer and aging java apps.
Thanks,
Adunlow

"Blocked plug-in message" problem on my OS X 10.6.8. (Safari's 5.1.10). Any solutions for a non-techie (step 3 on Adobe Flash's instructions leads to dead end). Thanks.

"Blocked plug-in message" problem on my OS X 10.6.8 (Safari's 5.1.10). Any solutions for a non-techie (step 3 on Adobe Flash's instructions leads to dead end, i.e. product for sale). Thank you.

Prior to updating flash player, you must first uninstall all previous versions. Make sure you are downloading from the proper Adobe website = Adobe Flash Player Software
Flash Player Uninstaller
Repair permissions and restart your computer after the installations.

Buy my problem of camels Store Lee games possible solution for me my problem?

Buy my problem of camels Store Lee games possible solution for me my problem?

This worked for me, sort of. A while back when I downloaded that windows update that installed the new version of IE, I noticed that IE wouldn't connect to the internet and pages wouldn't load. However, I thought nothing of it because I use Firefox and FF was working just fine.
I went into IE earlier this evening (it still wasn't working) and tried to follow your recommended steps. I got up to step 4 and IE froze. I tried closing it, reopening it and repeating the steps but it would always freeze at step 4. In another thread, someone was saying that iTunes released a security update and that fixed the store for them so I tried opening Apple Software Update and that froze. I tried it several times, nothing. Would always freeze. I even tried updating thru iTunes and IT would freeze.
Finally, I went to the control panel and uninstalled IE7. The iTunes store and the Apple Software Update program are now working! So thank you very much for your suggestion. Otherwise, it may have never clicked with me that IE was the problem.
Windows XP

Need Solution for iWeb/QuickTime viewing problem in IE 6 for Windows

When viewing an iWeb page in IE 6 for Windows with a background picture and a QuickTime movie embeded, the QT movie frame will "smear" when the page is scrolled. More specifically, The QT movie frame will not lock into its proper position as long as the page has a background picture selected in iWeb when viewing w/ IE 6 for Windows. Does anyone know of a solution for this? Does this problem still exist w/ later versions of IE for Windows?
By the way, if you don't already know this, changing the Page Background setting back to the default of 'Color Fill' in iWeb and republishing will not correct the problem once a background picture is selected for a page. You have to set the Page Background setting to 'None' and republish. The movie frame will then be locked into place when scrolling the page in IE 6 for Windows.
MBP 17in (1 GB RAM), PB G4 15in, PB G4 12in, iMac G3 Mac OS X (10.4.7) Loyal to Apple since the Apple ][+

Someone else posted that you may have to remove the image altogether, publish, then place the replacement image. The images for the background of my newest pages use this as a tiled background successfully.
http://web.mac.com/makentosh/iWeb/tipsfromtheiceberg/Images/background.jpg
I'm not sure how well tiling would work on your page though since it would begin to repeat vertically when you don't want it to (for me, tiling is exactly what I needed).

HT1925 I have a problem, whenever I try to install the iTunes This brings me to this problem "microsoft visual studio c + + runtime library" Can I have a solution for this? Thanks

I have a problem, whenever I try to install the iTunes This brings me to this problem
"microsoft visual studio c + + runtime library" Can I have a solution for this?
Thanks

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Hiss...Problem & Solution (for me)

Similar Messages

Maybe you are looking for