Hissing sound with wi-fi and power adapter connected
This is quite annoying - when the power adapter is connected and I have a w-fi connection to the internet I get intermittent 'hissing' sounds - however when I remove the lead and run off the battery this no longer happens. Does this happen to anyone else?!
What problem are you having ?
If you have the 'this iPad hasn't been backed up' message on screen and you can't remove it try a soft-resetave you tried a reset ? : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
When the iPad has restarted you can then force a backup via Settings > iCloud > Storage & Backup > Back Up Now
Similar Messages
-
iPad will not charge if hooked by USB to pc or plugged into wall. How do I know if the problem is with iPad, cable or power adapter. I have a 12, 10 and 5W adapters no success with any. Only one lightening cable so can't swap cables.
I'm sorry but this is too funny to pass up.
-
PE 9.0 no sound with DV AVI type 2 clip, but sound is ok with Media Player and Power DVD
PE 9.0 no sound with DV AVI type 2 clip, but sound is ok with Media Player and Power DVD
Dear Bill,
Thanks for helping me.
G-Spot reports:
Audio
Codec: PCM Audio
Info: 48000Hz 1536 kb/s tot (2 chnls)
Video
Codec: dvsd
Name: DVC/DV Video
Status Codec(s) are installed
Len 2:36.960 Frms 3,924 kbps 28800 Qf 2.778
Pics/s 25.000 Frames/s 25.000 Field/s 50.000
I/L BFF PAL
Pic (w x 720 x 576 seq ext 16:9
Sar 1.250 (5:4) par 1.422 (~10:7) dar 1.778 (16:9)
I have imported a WMA-file in Audio-1 track of PE – still no sound to hear. But I can see the sound in the track. (Like in my video-clip) Therefore I also think it is a setting in PE. Will you be so kind to tell me where I have to look? Because I am no expert. Or is it possible that I have to activate anything in PE? It is first time that I will work with PE 9.
Further information: The original sound of the Mini-DVD is 5:1 surround. After first problem I have changed Nero to export in Stereo, but this did not solve the problem.
Thanks and regards
Werner -
I'm using my macbook air as a desktop unit, with an auxiliary flat panel display, as well as an external storage drive and a CD/dvd drive. Is it safe to leave the power adapter connected to the computer all the time? Will the battery life get affected or shortened by being fully charged all the time?
Apple recommends that for best battery life, you allow the battery to discharge occasionally.
Here's a good link:
http://www.apple.com/batteries/notebooks.html -
Can I charge an iPod Classic 3G with the Apple USB power adapter?
I have just buy an iPod Classic 3G with 15 GB (SN JQ4239GQQQF) from ebay.
I have read that it's posible to sync it with my PC with Windows 7, but, It is not possible
to charge it by usb.
I could charge it with the Apple USB power adapter?
ThanksWith that particular model, only the Firewire cable and connection will provide power to the device. The USB cable is only for syncing.
Using the iPod Dock Connector to FireWire and USB 2.0 Cable
Here is the cable you'll need.
http://www.amazon.com/Apple-Connector-FireWire-Cable-White/dp/B00009KO0B
And the wall adapter as well.
http://www.amazon.com/Apple-FireWire-Power-Adapter-White/dp/B0000D8LSW
B-rock -
Macbook Pro won't wake up even with power adapter connected
If I use my Macbook to the point where the battery completely die, it will not power up again even with the power adapter connected. It takes about 15-20 minutes of charging before it will wake up again. It seems as though it can't draw power directly from the adaptor, but must wait until the battery is sufficiently charged, and draw power from the battery. I can't imagine this is a design decision. Any help?
Part of this time may involve attempting to read a damaged sleep image file, bewlatbrutha.
You should note, too that the batteries in these computers have a built in microprocessor of their own to try to prevent them from being damaged by discharging too deeply. If you discharge to the point where even the battery's own processor has to shut down you may never be able to resurrect your battery without outside help (and sometimes not even then). Almost all Lithium Polymer and Lithium Ion batteries (regardless of what they are fitted to) have this sort of protection. The battery has to have a certain minimum charge at all time to keep its own processor running.
Even without reaching this point it is not good for Lithium batteries to be regularly discharged to the point where the computer has to sleep or shut down. You risk severely shortened battery life if you do this regularly.
Cheers
Rod -
installed the ios 7.0.2 update to my iphone 4, now it is stuck on a screen with itunes icon and power plug.
I am unable to use the phone now. What should i do next? I plug in to itune in my computer and ask me to restore my phone? I will loose all my date?I hooked up itune and restore. after finished restores, it said my phone is in recovery mode and needs to be finish before using itune, my screen still show the itunes icon and power plug
-
installed the ios 7.0.2 update to my iphone 4, now it is stuck on a screen with itunes icon and power plug. is this corect? I am unable to use the phone now. What should i do next?
I hooked up itune and restore. after finished restores, it said my phone is in recovery mode and needs to be finish before using itune, my screen still show the itunes icon and power plug
-
No sound with Flash 15 and Windows 8
No sound with Flashplayer 15 and Windows 8. I have followed the steps to enable the program and to disable Active X filtering and still no sound. Sound works on all other applications.
The Adobe website instructions refer to a way to troubleshoot sound that cannot be followed -- see the inserted text below -- it refers to an application below and there is no application shown on the page.
Can someone please help?
How do I test my speakers?
Click Test Speaker in the application shown below to hear a sample sound. Adjust your speakers or headset so the sound is at a comfortable level.
How can I display this panel again?
You may want to display this panel again if, for example, you want Flash Player to use a different microphone. To display the Microphone panel:
Right-click (Windows) or Control-click (Macintosh) the application image while it is playing.
From the context menu, select Settings, and then click the Microphone tab.
I don't see the Microphone tab, so I can't display this panel.
If your computer or device doesn't support audio recording using Flash Player, you cannot select a microphone to use, and this panel doesn't appear.Hi
Is the sound card recognized properly in device manager or can you see yellow exclamation marks there?
I have founded an interesting article on the Toshiba website regarding no sound:
http://aps2.toshiba-tro.de/kb0/TSB7C021B0001R01.htm
By the way: You can also mute/unmute the sound if you press FN+Esc. Check this!!! -
Hi. my iphone is locked on a screen with itunes symbol and power cable on it. When i try to restore it shows error23. any help would be appreciated
http://lmgtfy.com/?q=iphone+error+code+23
-
Apple charge me twice for the bill when I order usb cable and power adapter, what should I do now ?
Apple charge me twice for the bill when I order usb cable and power adapter, what should I do now ?
they charge me separated for the cable & adapter , and charge 51.36$ for the full bill !!!
order number *****
<Edited by Host>Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers.. -
I tried to restore my iphone 5s but it shut off during the restore and wont turn back on I tried reseting it with the home and power button but it doesnt work and I tried connecting it to itunes but it doesnt show up
Did you try to connect in recovery mode, as explained in this article?
If you can't update or restore your iOS device
If this does not work, get it checked by an Authorized Apple Service Provider or by Apple:
iPhone - Contact Support - Apple Support -
my ipod touch 5 wount let me back in after trying to update ios with my computer and now says connect to itunes. it still wount work when i plug it in and click restore for it?
it went through the extracting software stage but then an error message saying that it encountered problems came up and it didn't restore.
-
iPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update
I use Firefox 95% of the time, and there's no problem with flash content (and I'm still at .55 - downloaded .64 last week but I haven't got round to making the change yet). At the rate they've been changing it recently it may well be out of date already .
I've been trying it in Safari, too with no problems apart from You Tube, but that's because I'm blocking Google cookies.
One thought does occur - if your Flash preferences are set to block all Local Storage, it may be that the problem site is trying to use Flash cookies (LSOs). I had this problem recently with the BBC iPlayer streaming content. Little Snitch notified an attempt to connect to a new URL - emp.bbci.co.uk.
If I disallowed it, no streaming; when I allowed the connection, it still wouldn't stream, so I did a bit of digging and came to the conclusion that it was trying to set a Flash cookie. When I unblocked, lo and behold - streaming resumed as normal.
I now have LSOs blocked in a more subtle way that lets the site think it's being set (but it ain't) and the streaming still works.
As for permissions repair - always repair from local; the permissions on the original disc will have been superceded by updates and new installations of Apple software.
DU needs to be reading the packages on the HD, not the (now out of date) install disc.
The recurring repair messages are normal and don't mean anything's wrong. As long as the final message is 'repair complete' there's no need to dwell on it.
http://support.apple.com/kb/TS1448 (for Leopard and Snow Leopard - Lion no doubt has it's own set). -
i cant connect to my computer with my ipod and itunes wont connect to it either. also i have forgotten my ipod passcode
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
And if necessary
iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem
Maybe you are looking for
-
Acrobat 9.0 serial not working for Acrobat XI update (Mac)
The subject line says it all. When I try to run my newly downloaded XI update, it requests a serial number for a qualifying product. I have Acrobat 9.0.0 Pro installed, and when I try to run XI, I get a window reading: "Serial Number you provided is
-
Hello, all. I have this project intended to be a hybrid cd - it can be played as a VCD if inserted ina DVD player, and if used in a computer it is played as a Director projector. The issue is that the video file is too big, so I can´t have it duplica
-
How to use package key in JApplet to include another program function, please replay if any body knows
-
FindClass() not able to find the class in the same path
Hi, I have a c prototype which calls a java function which push a message in JMS. i'm using jdk1.6. i have set JavaVMInitArgs vm_args.version = JNI_VERSION_1_6 when i compile the c code as gcc -g -lgcj -I $JAVA_HOME/include -I $JAVA_HOME/include/linu
-
Printing a tranfer posting material document
Dear experts, Please help me. I have ticked Print via Output Control - Collective Slip of Transfer Stock storage to storage (MIGO , Movement type 311) but system said "The system could not create any output". I have maintained the condition record in