Histogram Edit Delay in Develop Module in LR5.2

Hello Everyone!
I have been using Lightroom from version 4 without any issues. I have updated to LR5 and love the app, but I have problem in the develop module.
I load a RAW file pretty quickly and every edit I make on the photo is very quick, apart from the Histogram. For every image the histogram is loaded istantly, however I cannot do any modification for the first 4/5 seconds.
When having to deal with large amount of images (I shoot weddings and events as well), multiplying 500 images for 5 seconds means 45 minutes lost.
My machine performs well and I have no other slowdowns.
Anyone with a possible solution? This is driving me crazy!
Carlo

Bob,
You have me at a disadvantage because other than "Undo" I know of no way to "clear" individual edits in an image. Sure you can step back in History, but that clears everything above it in the stack. If you mean Undo then be aware that it applies to module changes, ratings, image switching, labels, etc etc etc etc So, Undo is worse than useless for removing History steps.
Something worth mentioning because it obvious from some previous posts that some folk don't appear to understand what it is they are looking at in History or how it works:
Left column = actual adjustment applied to parameter by step
Right column = running sum of step adjustments to parameter
In practice this means (left column value):
Step 1 Exposure = -5
Step 2 Blacks = +8
Step 3 Fill = +4
Step 4 = Exposure = +2
Step 5 Black = -5
Will result (right column) in the following being applied to image on rendering:
Exposure = -3
Fill = +4
Blacks = +3
Edit: i.e. the final slider positions.
Based on above I'm not sure of the benefit of allowing one to remove a history step when all that's needed is to dial it out at the top of the stack.
Furthermore, it doesn't matter the sequence that you apply the edits because it's the
total for each
parameter that's applied to the render, the final psd, tiffs will be identical irrespective of the order in each adjustment is applied.
BTW: all above is easily confirmed by looking at the ACR outputs as displayed in Bridge.
Pixel editing and Parametric editing are
different

Similar Messages

I'm having trouble with the develop module in LR5.4. Any adjustments are taking effect, but only viewable in the filmstrip, not on the main photo. The navigator will go grey, as does the main area too. This applies to all edits done in develop module. I h

I'm having trouble with the develop module in LR5.4. Any adjustments are taking effect, but only viewable in the filmstrip, not on the main photo. The navigator will go grey, as does the main area too. This applies to all edits done in develop module. I have posted several times on the forum with no responses to address this, and have seen others with the same issue. I have even gone as far as to do a complete re-install of LR5, with no success. I'm at a loss, and I depend on it for so much editing. Please help.

Reset your preferences file: Resetting (or 'Trashing') the Lightroom Preferences file - Lightroom Forums
Report back if that doesn't work.

¿Don't you think that the Development Module in LR5 it's slower?

Hi;
Before state my question; I'm running on Intel i7 QUAD CORE @ 2.80 GHz (8 logical CPUs) and 16GB of memory,
I feel that the Development Module in LR5 it is performing a lot slower that LR4. And the new CLONE TOOL sometimes freezes when you select a large area.

others noticed this too:
http://forums.adobe.com/thread/1230151?tstart=0
seems like the "final" LR 5 goes the same way as LR4.
wait until 5.4 and it will be usable....

Paid for membership. Can't use Develop Module in LR5

I recently paid for the $9.99 monthly plan. I received an email confirming so and have been charged on my bank statement. When I try to use the Develop module in Lightroom 5, a message appears saying it is disabled and that I need to renew my membership. How can I get it to recognize that I have already done this

Moving this discussion to the Photoshop Lightroom forum.
Bought CC, says trial exp please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for information on how to resolve the activation error.

Lost all changes made in the develop module in lr5

I have lost all changes that I made in the develop module. Most of these photos where stacked with the raw copy on top of the jpeg. Then I had picked the ones I liked and make changes to them in the develop module.Then I and changed them to DNG. This was over two weeks ago and I think I was trying to put them in to a collection. Now all I see is the originals as they appeared on the day they where imported.

Yes, it seems like you have two catalogs and imported into both.
I suggest strongly you view some video tutorials on AdobeTV before you get into a tangle.
http://tv.adobe.com/product/lightroom/
and look here also: http://forums.adobe.com/community/lightroom/lightroom_for_beginners?view=discussions

My photos look terrible in the library module after editing in the develop module. They look nothing alike. How do I solve this issue? Using Lightroom 5.

anyone have any ideas? The only way I can get around this is export the photo back into iPhoto and try to edit out the mess.

The waves you are seeing on your monitor must be more pronounced than what I'm seeing in the posted screenshots. The Library module uses Adobe RGB AND 8-bit JPEG preview images, which can cause banding in fine gradient areas (compared to Develop view), but I'm not seeing a huge difference in your screenshots. Here's a screen shot with my non-wide gamut monitor calibration profile. If my screenshot shows less banding than what you are seeing with the original images it indicates a monitor profile issue as described by twenty-one. A hardware calibrated monitor is recommended to prevent these types of issues.
The Library image also appears lighter in the shadow area, which probably indicates more Luminance NR needs to be applied or perhaps less sharpening. Try it and see if that helps with the issue.

Develop module inactive. says to renew my subscription but i've already paid.

The developer module on LR5 is inactive, says I have to renew my subscription but I've already paid it days ago.

Hi,
Please refer to the help document below:
Creative Cloud Help | "Renew your subscription" window appears when you launch a Creative Cloud application
Regards,
Sheena

LR3 "Develop Module" slowing related to noise removal

Hi all. As many fellow early adopters to the full release of Lightroom 3, I have been experiencing very slow rendering and response times when editing in the Develop module. I am on a very powerful machine that meets and exceeds the requirements by a long shot--quad core, 8 gigs ram, 64bit win7 and a solid state drive. There is absolutely no reason on my end that I should be experiencing any kind of slowing, especially when I would get a flawless experience in LR 2.x, and even the early LR3 betas.
So I did some fiddling and I believe I may have pinned the slowing down to the adjustment brush, and even more so with the new noise removal. It appears the algorithm being used in the new noise removal tool is a system resource hog. I ran a few "tests" to see if the issue is in fact related to noise removal, and it seems so. When I have an image open at default settings, there is no visible render time--its instant. But when I add noise, I find the render time to jump exponentially. Every 10% increase on the slider adds about half of a second on the render time, and my CPU usage jumps, and likewise I see an increase in memory usage. The higher on the slider, the slower the render time and the more memory is being used.
What I suggest for everyone experiencing the slow loading times is to entirely disable noise removal while editing, and see if it results in faster editing. If the noise removal IS the culprit, wait until you have edited all of your images in a set and then copy the noise removal onto each image in a batch as the very last step before exporting for print/web.
Hope this helps others, as it truly did help me.

JayS In CT wrote:
No problem.. would be interested in what you find turning it on and off on your machine.
Sadly, turning it off doesn't help me. I haven't tried to not use it instead of using it and turning it off afterwards yet, but I suspect that won't make a difference either.
I'm experiencing terrible lag with the adjustment brush on images where I have done lots of edits already. I create a stroke and 2 seconds afterwards it is actually drawn.
Playing with your suggestion, I discovered that I can address the lag by reducing the image size. Either exiting "full screen" mode and making the program window rather small or by adding the film strip back to the Develop view, I can reduce the lag to the standard "not ideal since not immediate but acceptably fast" speed.
I've read elsewhere that reducing the displayed image size addressed performance issues.
I haven't tried to use "1:1 previews" whether these may make the perfomance image display size independent.
I hope this issue will be fixed in the future. It is so nice to be able to switch off the top and bottom panel (sometimes even the left side panel) in Develop mode. It would be bad to be forced to have them all in -- or even exist "full screen" mode -- just to address the performance issue.
As for the Flickr issue, did you let Adobe know formally?
I have just submitted an official bug report.
During the BETA forum days that didn't seem to be necessary as Community Professionals would try to reproduce bugs and then forward them on to the programmers. They also confirmed that they did it. That was really nice.

LR 3.2 - Pb with the reset settings in the develop module / library module

Hi
i have a big issue with LR 3.2. In the library modul, my thumbnails didn't have anymore the small icon saying that the picture has been editing in the develop modul. When i am moving into the develop modul, the history is still here but the picture appears in the defaults setting like she has never been edited.
It is said : "reset settings"
How can i do for my pictures to became like they were ? I can't go back one picture by one picture. Did I changed something, I really don't understand and need your help.
Thanks
Nico

In the Library click View >View Options
Under the Grid View tab select Thumbnail Badges
You should then see your icons.
To Re-Set a batch of photos select the first one and reset it.
Hold down the shift key and select the last one (so that all are selected)
Then click Sync.

I have lightroom 5.7 and a macbook pro 10.9.5. Occasionally when I am editing a photo in the develop module, I suddenly get a "file not found" message and the editing ceases to work. There is no "exclamation" icon below the histogram box in the Library

I have lightroom 5.7 and a macbook pro 10.9.5. Occasionally when I am editing a photo in the develop module, I suddenly get a "file not found" message and the editing ceases to work. There is no "exclamation" icon below the histogram box in the Library module or on the photo in grid view, and the histogram is gone. What is going on? Trying to find it using the "find missing photos" in the library menu does nothing.

Red splotches on photos in LR5 Develop Module

I get red and blue splotches on photos in LR5 Develop Module. Seems to be mainly in bright areas of photos. Not there in Library module. I noticed this in the Beta as well but thought it would be fixed before release. In LR4.4 everything is fine.

Turn the clipping indicators off in the Histogram in the develop module. The are the little triangles in the upper left and right corners of the histogram.

When I change anything in Develope module LR5 will not allow me to open a .NEF file in PS6

I am using LR5, ACR 8.2 Beta and PS6 on a MAC. If I open a .NEF file in Develop Module and make any changes I cannot get LR to allow me to choose 'Edit in PS6". The option lights up but nothing happens when I click on it.
If I Choose a .NEF file that has just been imported and no changes have been made, LR will allow me to open it in PS6. Also .jpg and .psd files will open fine in PS6 from LR5.
Any help would be appreciated.

Do you happen to be using a new camera? If the camera you are using in in the latest camera raw that is available in LR5 but is not in the version of camera raw that PS6 uses, that's the behavior I've seen where Photoshop basically doesn't do anything. Remember that Adobe doesn't go back and update camera raw in the old versions of PS. I've got a post coming out on Tuesday that covers my experiences using LR4/LR5 and PS CS4. But the way that I get around the incompatibility is to have LR render the file and send it over the PS instead of having PS try to open my NEF.
I think typically what should happen if you open a NEF, make changes to it, and try to send it over to PS is that you should be prompted by Lightroom to see if you want to send over the NEF or a rendered version of the image with the Lightroom changes. Do you see that dialog at all?

Using Develop module on NEF stops 'Edit in Photoshop' command from working.

Started with LR5 CS6 CR8.1
Suddenly when a raw image has been porcessed by the Develop Module the (ctrl-E) 'open in Photoshop' command does not work for that image. It works for images that have not been 'developed'.
I have deleted LR preferences several times.
I have upgraded to LR5.2RC and CR8.2RC.
As far as I remember this catalog was new as LR5.
Any ideas please?

Creating a new catalogue and importing the images does not resolve the problem.
The problem is only occuring on a few images from a particular collection.
Creating a virtual copy also will not edit in photoshop.
Creating a virtual copy and reseting the develop settings will allow the ctrl-e command to work.
However, manually re-applying the develop settings once again stops the ctrl-e command working.

Old Develop Module in new upgrade LR5

I am trying out the 30 day LR 5 trial to see if I would like to upgrade. For some reason my Develop Module contains the same tools as my older version, though I know I shouldn't even see a "brightness" tool... How do I fix this and get the new tools so I can continue my 30 day trial?

You are probably viewing photos edited in Process Version 2010.
Update the photos to PV 2012 and access the new tools
http://helpx.adobe.com/lightroom/help/develop-module-options.html
Be warned that there are big differences between PV2010 and PV2012 and you may not always like the changes.
http://digital-photography-school.com/understanding-lightroom-process-versions
So it's up to you whether you want to convert all existing photos to PV2012 in one step - or if you want to convert them one/several at a time.
New photos imported into LR5 will automatically be edited in PV2012 so there will be no conversion required and the tools in the Develop module will be the new ones as expected.

Problems with LR4 - Develop Module - Edit in CS5

I've just upgraded from LR3 to 4
When I make adjutments on a RAW or JPEG file in the develop module, and then send it to PS5 for more work, not all the adjustments show up in CS5.
Example, I cropped an image, and then made local exposure adjustments using the 'brush' tool.
Exported to CS5 using 'Photo' 'Edit in', and the image goes to CS but only the crop adjustment is showing.
I've done all the updates on CS, but this is a pain.
I'm running a MAC with Snow Leopard OS
Can I uninstall the upgrade and reinstall..? Would that be any use...??

I was greatly confused by all this for a while, but think I finally figured it out, thanks to CSS Simon and others here (I'm new to Lightroom, having only used Ps/ACR previously).
What happens is that "render using Lightroom" doesn't involve ACR at all. It goes straight to Photoshop (and puts the rendered file alongside the raw). The other option, "open anyway", renders the file through ACR. But ACR 6.6 and before can't read PV2012, that's why you need to install the ACR 6.7 Release Candidate, which can (although it doesn't give you access to the 2012-specific sliders).
Another thing that tripped me up at first was that no Lightroom edits at all would show up in Bridge or ACR, even with ACR 6.7 installed. I finally discovered that I had to set Lightroom catalog settings to "automatically write metadata changes to xmp" - otherwise all Lightroom edits would just exist in the Lightroom catalog and not be visible to other applications.
This is of no importance if you only use Lightroom, but it certainly is if you have a mixed workflow with Photoshop and Bridge.

Histogram Edit Delay in Develop Module in LR5.2

Similar Messages

Maybe you are looking for