Historical Data with it's delta loading from PSA to ODS in 3.x model

Hello ,
I want to load the one year back historical data with it's delta's to ODS object in BW 3.x model .
So can you please give steps to load historical data from PSA table into ODS object(not from the source system).
Thnaks alot
Regards
BI Beginner

Hi
Run the full load IP from PSA to ODS with selections on 0CALDAY(give one year selections)
make this full load as repair full request.In display mode of IP, in menu bar click on scheduler --> select repair full --->check the option and click ok.
now execute the IP.
If you run like this, your init which has between your PSA and ODS will no get disturb.
Regards,
Venkatesh.

Similar Messages

Transformation Rule: Error while loading from PSA to ODS using DTP

Hi Experts,
I am trying to load data from PSA to ODS using DTP. For about 101 records I get the following error:
"Runtime error while executing rule -> see long text     RSTRAN     301"
On further looking at the long text:
Diagnosis
    An error occurred while executing a transformation rule:
    The exact error message is:
    Overflow converting from ''
    The error was triggered at the following point in the program:
    GP4808B5A4QZRB6KTPVU57SZ98Z 3542
System Response
    Processing the data record has been terminated.
Procedure
      The following additional information is included in the higher-level
     node of the monitor:
     o   Transformation ID
     o   Data record number of the source record
     o   Number and name of the rule which produced the error
Procedure for System Administration
When looking at the detail:
Error Location: Object Type    TRFN
Error Location: Object Name    06BOK6W69BGQJR41BXXPE8EMPP00G6HF
Error Location: Operation Type DIRECT
Error Location: Operation Name
Error Location: Operation ID   00177 0000
Error Severity                 100
Original Record: Segment       0001
Original Record: Number        2
Pls can anyone help in deducing and pointing this error to the exact spot in the transformation rule
Thanks & Regards,
Raj

Jerome,
The same issue.
Here are some fields which are different in terms of length when mapped in transformation rules
ODS                    |Data Source
PROD_CATEG     CHAR32           |Category_GUID      RAW 16
CRM_QTYEXP     INT4          |EXPONENT      INT2
CRM_EXCRAT     FLTP16          |EXCHG_RATE     Dec 9
CRM_GWEIGH     QUAN 17, 3     |Gross_Weight     QUAN 15
NWEIGH          QUAN 17, 3     |Net_Weight     QUAN 15
CRMLREQDAT     DATS 8          |REQ_DLV_DATE     Dec 15
The difference is either some dats field are mapped to decimal, or the char 32 field is mapped to raw 16 OR Calweek, Calmonth is mapped to Calday
Both mostly all the ods field size is greater than the input source field.
Thanks
Raj

Issue when doing Delta loads from PSA to DSO using DTP - Pls help Urgent

Hi All,
I have done 3 data loads into PSA and from PSA, iam loading the data into DSO - by splitting that load into 3 using 3 DTPs. (Split that by Fiscal Period).
2 of the DTP loads are extracting the data from 3 PSA requests.
But, one of the DTP load is filtering on ONE PSA request.
So, we are not getting the full data into DSO.
Can some one pls help me why the DTP load is beheaving like this ???
Even though i have not given any filters for Request id, still , for one load its picking up the data by filtering on One Req ID.
Cheers,
Nisha

Hi Jr,
Sorry for late reply.
I think i found the solution, the diff between the DTP's is i ahve ticked " Get request one after another " .
I have changed it now and its working fine.
Thanks,
Nisha

Mass update from PSA to ODS in 3.5

Hello friends,
I am having nearly 100requests pending to load from PSA to ODS.
I am doing manually one by one from RSMO.
Is there is any way to do it in mass or automatically..
Thanks
Tony

If you are in BI, possible.
Updating multiple PSA requests one at a time
I doubt if it is available in 3.5.

Table on delta loads from data mart

Hi,
I am loading data from two DSO's (let's call them A and B) to another DSO (B) in BI 7 with a BW3.5 delta infopackage.
Now I want to know where I can find information on the timestamp or last request from the last delta load from A and B to C.
So in fact I would like to know how the system knows which requests in A en B have not been loaded to C yet at the next delta load.
In which table can I find the information for ODS A and B that is used by the system to define what data in the change log has been loaded or not to ODS C or other targets. (In fact I should have a comparison table in BW as ROOS* in R3)
Thanks in advance!
Kind regards,
Bart

Hi Guys,
Thanks for the answers.
I know how to check everything in the Workbench, but I want to know where the information of the delta is stored technically.
Just for the sake of completeness:
Due to some issues; several successive loads from A and B were correctly loaded into DSO C (the 'new' table), but could not be activated. It is not possible to do a repeat or anything else. I am not going into too much detail, but just take this for granted.
The only way we can 'solve' the problem is to make the system believe that the 3 last loads (activated data) in A and the two last loads in B have not been loaded to C yet. Just deleting the last delta's in C and do a new delta from A and B to C will not work.
Therefore I want to 'manipulate' the table that is being read by a delta load. If I can change the timestamp or request numbers in that table, I can make the system believe that some requests have not been loaded to C yet.
Dirty, but it should work I think. But I am still figuring out what table contains information about the datamart data source (8A and 8B) and the last delta load to the targets.
Hope this is more clear.
Thanks in advance!
Kind regards,
Bart

Error in delta loading from a planning cube

hi all,
I am using a delta load from one planning cube to another.When the changed records are of a magnitude of 100 then it is successful but when the records are of magnitude of 100000 then it stays yellow with no data records sent and eventually fails.the packet size is 20000.
any help is appreciated.

Hello Ajay,
Have you checked that your Request is closed in the planning cube? FM RSAPO_CLOSE_TRANS_REQUEST will do it
It is a customizing issue to tell the infopackage to end "green" when it has no data.
Transaction Spro ==> SAP Netweaver ==> SAP Business Information Warehouse ==> Automated Processes ==> Monitor Settings ==> Set Traffic Light Color. There you have to set the Traffic light on green if no data is available in the system.
Hope that helps
best regards
Yannick

"Error occurred in the data selection" on init delta load ODS- InfoCube

Hi, gurus and experts!
I'm trying to do Init delta load from 0FIAR_O03 ODS into 0FIAR_C03 InfoCube in PRD env. by InfoPackage "Initialize with delta transfer (with data transfer)". Immediately after the load was started I got error
"Error occurred in the data selection"
with details
"Job terminated in source system --> Request set to red".
Where are no any short dumps. There are 1 activated init load in ODS - nearly 6 500 000 records.
Any ideas about error? And the way I can load data?

Hi Gediminas Berzanskis,
I faced the similar error when I tried to load data from an ODS which contained huge amount of data to a Cube. Even in your case the volume of data is more (around 6.5 million records). The error could be due to the table space issue, please contact your Basis team to check if enough table space exist for both the data targets.
Meanwhile you may also check the RFC connection of the Myself source system.
You can replicate the DSO datasource once and then reactivate the transfer rules using the program RS_TRANSTRU_ACTIVATE_ALL.
Try load with a small amount of data with a Full load option and then with a delta option..
Hope this Helps,
Prajeevan (XLNC)

Delta load from planning area to third party system

Hi All,
Generally we sent full data load from DP planning area to back up cube in BW system..But suppose we are to send delta load from DP planning area to third party BW system, then what changes we need to do on the DP planning area side so that we send all the changed data from livecache. Can this be done in a standard way?
Thanks

Hi Tarun,
It's not possible to extract delta loads from the APO planning areas. The delta loads are only possible with standard BW objects, and planning area is not a BW object.
SAP doesn't provide the functionality to have delta loads when you use export data source based on the planning area.
PS: From backup point of view, anyway having delta load would not make much sense. We take the backup as a snapshot of a particular time, and if restoration is required, based on the request numer or the date of extraction, we restore the relevant data from cube to the planning area.
Thanks - Pawan

Error when i am loading data from PSA to ODS

hai Gurus
Very good morning
Actually i am loading data from PSA to ODS.
But when i am loading data i am getting the error InfoObject/BIC/0REFER_DOC does not contain ALPHA -CONFORMING VALUE 0.
Can anybody help me to solve the problem and reload the data
Thanks & Regards
Jayavardhan

Hi,
Lacs of postings are there in this forum on this topic. Searching teh forum is the best option for u now.
With rgds,
Anil Kumar Sharma .P

Process for Flat file delta load from Application server to transactional??

I want to do a flat file extraction in delta loads from application server and that should be loaded into a transactional cubes scheduling a process chain.
Can any one help with ABAP code and step by step process for this?
Thank you
Devi

Hi Devi,
As per your explaination, you want to load a list of files from application server using process chain.
You can do this with below steps.
1) Create a Event and call event to run Process chain multiple times.
2) Put all filenames in a file say, source-File
3) Write a rooting to read filename from Source-File and trigger InfoPackage
4) At the end of the process chain create new customized program which will delete first line from Source-File so that it will take next file in next run as well as delete currently loaded file. Once this is done trigger event again to start process chain again.
Regards,
Ganesh

Loading from PSA with different process chains at a different time

Hi,
We currently have an issue regarding loading the same data from 2 separate Process Chains from the same datasource at a different time.
Simplified what is happening :
Process Chain 1:
Step 1a = Load 2LIS_13_VDITM into ODS "A"
Step 1b = Load 0FI_GL_4 into ODS "B"
At a later time, (PC1 is ready) =>
Process Chain 2:
Step 1 = Load ODS "A" to ODS "C"
Step 2 = Load 0FI_GL_4 (from PSA) to ODS "C"
Because of dependencies, step 2 from PC2 has to be loaded AFTER Step 1 (with activation) from PC2.
We cannot change Process Chain 1.
What i want to do is load the data from 0FI_GL_4 only to PSA in Process Chain 1 and pick it up again in Process Chain 2. This functionality is available in NW2004S, but not in our version BW 3.0B.
Does anyone have an idea how to do this ?
Thanks,
Pascal

Hi Dinesh,
Thank you for your quick answer.
The problem is i cannot change PC1, but 0FI_GL_4 is loaded with the option into PSA and then immediatly to the target. So data is available in the PSA.
When I try to load data from PSA into ODS "C" in PC2, i get an error saying that the belonging infopackage (from PC1) is not available in this PC and thus cannot be loaded from PSA.
Regards,
Pascal

Loading Data from PSA to ODS

Hi,
right now there are nearly 50 requests in my PSA. I want to load entire data from PSA to ODS at a time. Ours is 3.x flow. I m able to load one request at a time. Can anyone help me to load all requests at atime?
Please give me step by step.

Hi Narendra,
First of all all the records are unable to pick up at a time i single attempt due to. follow the reason
It is not possible to load all the PSA requests' to target at a time.Because records picks up from PSA to Data target one by one due dependencies of routine run on the data transfer up to the extent. anyway if you can do this thing the process of loading the requests' one by one, offcourse it is totally depends upon manual .
Hope you are understood the scenario.
Regards,
Vamsi Krishna Chandolu

Error when loading the data from PSA to ODS......

Hi BW guru's,
i am facing one problem while loading the data from PSA to ODS.so please help me in this regard.
Please give a step by step guidelines for me...
the error while loading the data from PSA to ODS is "There are no PSA tables for these selection criteria","An error occurred when reading PSA data".
thanks in advance,
ashok.

hi ashok,
u can push data from psa to ods, for this goto the psa in rsa1>psa>goto that request>rightclick>select " schedule update Immediately ", then data will moved from psa to ods.
or
In ods > delete the failed request>goto the processing tab-->select 3rd option " psa and then subsequentially to data targets ", --> schedule the infopackage.
bye
sunil

Load data from PSA to ODS in Process Chain

Hi All,
I want to load the data from PSA to ODS. I am using 3.5 Version. I have created the Info Package to load the data from R/3 to ODS.
I just want to load data in the following Condition
1. Need to load data from R/3 to PSA.
2. Need to load data from PSA to ODS.
I need to include this two Info Packages in Process Chain.
I dont find any option to load PSA to ODS through Process Chain..
Pls Suggest.
Thanks,
Ram.

Hi Ram,
You can keep the settings in the infopackage to load data from R/3 to PSA (by giving the settings as PSA and then into datatargets). Specify the option Update in all data targets for which the Rule Exist unde rthe Data Targets Tab.
Then in Process Chian, there is an option by the name REad PSA and Update Datatarget under the node Load Process and Post-Processing in the Process Types.
In the varaint, specify the infopackage name and save the varinat and uise it in the PC.
Regards
Sunil

What does "Always stay up to date with the latest photography innovations from Adobe" mean ?

Hello,
I'm considering buying Lightroom 6 standalone version, but I wonder what the fact that "Always stay up to date with the latest photography innovations from Adobe" isn't available means ?
Will the standalone version be updated for free with new camera support ?
Will the standalone version be updated for free with defects correction ?
If there are new functionalities (lightroom minor version), won't they be available for standalone version before the next major version ?
Thanks for your help

My understanding is that LR6 will continue to receive bug fixes and new camera support updates, but not any new functionality/features that LRCC receives. See question 2 at the bottom on this post: Lightroom CC/Camera Raw FAQ

Historical Data with it's delta loading from PSA to ODS in 3.x model

Similar Messages

Maybe you are looking for