Historical rates & conversion of balances based on weighted average in GL

Hi all,
Can anyone explain the process of loading historical rates and conversion of balances in GL?
what are the interface tables mainly used for this ?
Please help me out .

>
Dinakar A wrote:
> Can any one please help me how to convert FISCPER3(Posting period) to date.
>
> Thanks & Regards,
> Dinakar.A
Isn't posting date available in cube ??
0FISCPER3 to date is not possible.Instead use posting date in your query.

Similar Messages

Weighted Average in Pivot View

Hi,
Can you please throw some light on the below scenario based on weighted average:
For Ex:
Cloumn1---Column2-----Column3
R1-----------Line Item1--10
R1-----------Line Item2--20
R2-----------Line Item3--30
R2-----------Line Item4--40
Now i am trying to achieve weighted average based on the group by of Column1.
10+20=30==>30/2=15
30+40=70==>70/2=35
Before raising this thread, i had a look at the below URL:
http://siebel.ittoolbox.com/groups/technical-functional/siebel-analytics-l/weighted-average-for-fact-column-values-1242947
Can you please let me know how we can achieve this in the pivot view(OBIEE 10.1.3.4.1).
Your help is highly appreciated.
Thanks in Advance
Siva

Hi,
Try-
AVG(measure_col by column1)
And try making in the column formula -Aggregation Rule (Totals Row)-->Average
And also try making the aggregation rule in the pivot table of the column as-->Average
Hope this helped/ answered.
Regards
MuRam
Edited by: MuRam on Jun 11, 2012 4:46 AM

Translating equity at the historic rate (BPC 7.5 NW)

Hello,
For group reporting purposes, our accounting policy is to state our consolidated equity at historic rates. That means that net assets of all subsidiaries are translated to GBP at the closing rate and the income statememt of all non-GBP subsidiaries are translated at the yearly average rate. The equity for all non-GBP is not re-translated but the difference between the equity at the closing rate and the equity at the historic rate is posted to FCTR in reserves.
Anyone has any idea how to implement this in BPC?
Thank you.

Hello,
Thanks for your response. I would really appreciate if you could expand on your comment above, as the rule needs to do several things:
-The opening balance of equity (in any particular BPC account code) needs to be at the previous period's closing rate.
-The movement during the period in the account needs to be at the average rate.
-FCTR needs to be calculated, which is the difference between the LC at closing rate, less the amounts mentioned above. But the FX will be posted to a different account.
Thank you very much again.

Period Rate & Historical Rate?

Dear all,
1) To define "Period Rate" is for translation purpose, am I right?
2) I define a new responsibility for a company only allow them to entering GL, if I need to performing translation, I need to enter historical rates only for owner’s equity accounts ( I mean the balance) only for the first month, no need afterwards?
Please advice,
Amy

Dear Jogendra,
I have followings question from your reply:
1) Why the historical rates should be defined for all
the periods if it is different in different periods?When we run translation,historical rate defined for code combinations looks for immediate period in which the rate is defined.So,if the historical rates are not same from one period to another due to business reason and the rates are not defined in the immediately preceding period then the code combination would look for earliest period available for translation.So,we should define for all the period.
>
2) What is your meaning of "Other rates defined for a
code combination"? What rates I need to define in
code combination?Other rates means period rates defined for a period for all the code combinations other than owner's equity accounts.
Except in case of historical rates for owner's equity,there is no need to defined any rate for each code combination.
Best Regards,
Amy

SAP Standard report to view the asset balance- Based on the calender year

Hi ALL
Any sap standard programs are available to view the asset balance based on the calendar year not for the fiscal year.
Asset balance report S_ALR_87011964 will display based on the fiscal year in report date. For example I want to view the September month asset balance, Any standard report to view the calendar year wise output.
Regards
K.Gunasekar

Dear Gunasekar,
in Asset balance report S_ALR_87011964 you can view also a calendar year, you can enter every Reporting date in the progrm.
In RABEWG_ALV01 you can enter also a Capitalization date "from to". I think this is what you want.
regars Bernhard

Message while Craeting new Exchnage rate conversion factor

Hi,
I want to maintain new currency conversion in OB08, for CHF to INR, we are maintianing conversion for this currecny first time while maintaining it is giving message as
No exchange rate conversion factors could be
found for the currency pair CHF/INR (exchange
rate type M) because the entry is missing from
the appropriate table.
Do you want to maintain the table entry
manually?
after that If I ckick yes for ***Do you want to maintain the table entry manually? *****
then it is allowing ,
I want to this this OK process or I have to maintain some entry at some other place.
Also it is required to be done from development serevre or I can directly do this in Production server.
regards,
zafar

HI
Check the link
Re: Exchange rate conversion factor could found for the currency pair USD/INR E
Regards
KK

Pricing error: Exchange rate conversion Message no. V1803

Hi,
I am getting an error in the pricing procedure
Pricing error: Mandatory condition XXXX is missing
Message no. V1801
Pricing error: Exchange rate conversion
Message no. V1803
where as the exchange rate is maintained.
Please guide me

hi
Pricing error: Mandatory condition XXXX is missing
Message no. V1801
this error comes for pricing procedure , check the pricing procedure your mandatory condition not maintain the condition records , i think it is for basic price, please maintain the condition records at vk11,
Pricing error: Exchange rate conversion
Message no. V1803
this error comes for exchange maintain at img-general settings-currencies-enter exchange rates .
here you will maintain the exchange rates, please fallow the above path,

Sap standard report for customer trial balance based on business area wise

hi experts,
Can any tell me is there any standard report for customer trial balance based on business area.

hi,
You can use this report.
RFSLD00 Trial balance
For Further Reference use the link.
http://www.abapcode.info/2007/06/standard-sap-reports.html
Regards
Sumit AGarwal

G/L Balance based on Key Date

Hi,
I have a requirement to make a G/L ledger.
Currently i want to get the g/l balance based on a particular date.
ex: 12.05.2008 to 15.05.2008
How can i find the keydate balance.
I think there is no direct way to do that. Want some suggestions on workaround.
Varun

>
Muhammed Ansari Abubekkar wrote:
> Try using the BAPI
>
> BAPI_AR_ACC_GETKEYDATEBALANCE
>
> BAPI_AP_ACC_GETKEYDATEBALANCE
>
> BAPI_GL_ACC_GETPERIODBALANCES
>
> Regards
> Ansari
I know. Above 2 are not used for G/L accounts
Third one will get period balances only.

Why does an iPhone 6 60p clip need rate conversion?

When I take clips with an iPhone 6+, they are supposedly taken in 60p (if enabled in "Settings"). When I import such a clip to FCP, it is reported as 60i. I also see this with every other high-res clips, such as the ones taken from a Sony RX-100: They show as 50i, but are 50p.
(Sorry, the labels are in German.)
I manually set the field dominance to "progressive", because that's what it is.
You may notice the strange dimension: iOS 8.0 had a bug that sometimes locked the direction sensor. This particular clip was shot with the bug active. The phone was held horizontally, but the clip is marked as having been recorded vertically.
The project (timeline) is 60p:
Now comes the tricky part: Every clip from the iPhone requires a rate conversion:
Why is this the case? Both clip and timeline are 60fps.
The same does not happen with a 50p timeline and 50"i" material from the Sony RX100.

I have a Verizon Wireless phone so there is no SIM card. I did call apple and they had me restore it in DFU mode. It still pops up as activation required at least once a day.

Report to see Trial balance based on Group account

Hi Fi Gurus,
I am trying to see verify my GL balances based on group account no ( Group COA GL). is there a standard report that can help me here?
Thanks in advance.
Dasaradh

Hi,
"Group Account Number" is available in the dynamic selection in report S_ALR_87012277 in ECC 5.0 and ECC 6.0 also.
When you click on "Dynamic Selection" button, in left hand side double click on "Group Acocunt Number" and then you can enter the values in right hand side for this field. (i.e. after activating the "Group Account Number" in dynamic seleections.)
Regards,
Gaurav

Reporting based on weighted product unit sales

Hello! I was just wondering what the best way of generating reports based on weighted product unit sales? I know that reports can be build based on weighted revenue, but I'm keen to be able to report on product units as well. For instance, if I have three
opportunities:
Opportunity 1: Has a probability of 25% for 100 units of Product A, closing Month 1
Opportunity 2: Has a probability of 50% for 100 units of Product A, closing Month 2
Opportunity 3: Has a probability of 50% for 100 units of Product B, closing Month 3
Ideally, a quarterly report would show that I have sales of 75 units for Product A ((25%*100)+(50%*100)) and sales of 50 units for Product B (50%*100). I could then drill down the quarter and look at the Monthly sales breakdown.
Not sure if this can be done by using the default fields and some clever Report building, or whether I'd need to create a custom field for each product sale that had an auto-calculated field (OpportunityProbability * Quantity)?
Does that make sense? Any pointers would be massively appreciated! :)

???

Translating ACCOUNT at Historical Rate

Hi all,
Can someone please help because there does not seem to be anything in the documentation regarding this or I must be missing it?
I have several ACCOUNTs that need to be translated at historical rates. In other words, users will enter the Local Currency amounts and the corresponding Translated Currency amounts for these ACCOUNTs in an input template. However, the translated currency amounts get re-translated at some other exchange rates when I run the FX Restatement package.
I need to tell the application to ignore re-translating the translated currency amounts for these certain ACCOUNTs and just leave the translated currency amounts entered by the users alone as they are. Can this be done in SAP BPC?
Thank you.
Regards.

Hi Joost,
Thanks for the tips.
I suppose that the values I specify in the dimension prompts in FX Restatement SSIS package will define or delimit the scope that the stored proc SPRUNCONVERSION will process, in terms of which dimension members to process.
If you don't mind, just a few more things to cement my understanding.
Is the parameters list for SPCONVERSION fixed in terms of the dimension types I can pass into the stored proc? Also, must I specify the dimesions in a particular order (e.g. can %CATEGORY_SET% be placed before %APP%) or can I enter any parameters in any order that I like? Does this also hold true for all other stored procedures? Is there any official documentation on this?
Secondly, the FX Restatement SSIS package asks users to select the value of 3 dimensions: CATEGORY, ENTITY and TIME, which I select using a drop down list. I guess other dimensions not specifically asked for will be taken from the Current View settings.
However, the SPRUNCONVERSION is written as:
*RUN_STORED_PROCEDURE=SPRUNCONVERSION('%APP%','%CATEGORY_SET%','','GLOBAL','%SCOPETABLE%','%LOGTABLE%')
In contrast to the FX Restatement SSIS package, the member for TIME and ENTITY is not specifically fed into SPRUNCONVERSION. May I know how I should reconcile this or should I not be bothering about this in the first place?
Thank you very much.
Regards.

ACE30 Load balancing based on IP and using x-forward-for header

Hi Guys,
We currently have a load balancing policy setup to direct traffic to say FARM-A based on a particular range of source (client) IP addresses, and the default FARM-B for all the other traffic.
We are now looking to introduce a web application firewall (WAF) before the ACE. The WAF will be inserting the client IP address into the x-forward-for http header. Now I was wondering how best can be achieve the load balancing based on source IP given that we'll have to parse the HTTP header for this x-forward-for field? Are there any examples that anyone can point me to?
let me know if you have any questions.
thanks
Sheldon

Hi Sheldon,
You might try creating a class map that matches on the XFF header. Then use that as the L7 load balance criteria (based on the hash value of the XFF header), using the predictor hash header.
-Alex

Oracle Financial Consolidation Hub FCH Historical Rates

There is a requirement to enter data for Historical rates in Oracle R12.
I only know that GCS is the schema for historical rates table.
Please, I need to know if there are any interface tables or API relates to this upload.
Also any technical web links / documentation related to it.
Edited by: Anshul Khandelwal on Jun 15, 2011 10:58 AM

Found a web ADI for entering historical rates in FCH.
responsibility fch>>setup>>rates>>create historical rates
but is there any other way to enter historical rates, any API or interface table ??

Historical rates & conversion of balances based on weighted average in GL

Similar Messages

Maybe you are looking for