History and Next Step not working in UWL SAP MDM 5.5 SP6 Patch 2

Hi,
Im not able to send a record to other process step with other roles in a WF.
When USER 1 logs on its possible to send the record to the next process step where USER 2 is assigned. When USER 2 logs on, the user is not able to send it anywhere, the iView is empty.
Its the same problem when we press the history button. In the first step of the WF its possible to see history. In the second step the history iView is empty.
Any ideas?
BR
Michael

I've seen issues like this as well. There are a variety of issues that came out of the SP06 Patch 2 upgrade which effect the MDM workflow and Portal UWL. I would recommend checking out the latest hotfix as I think it resolves a lot of these problems. The latest build is 5.5.62.50 (5.5 SP06 Patch 2 Hotfix 4). They released four hotfixes within a month (I think) so my guess is they are aware of the issues with SP06.

Similar Messages

Windows error: iTunes crashes (uninstall and reinstall does not work)

Hello all.
I (and another user) have had a problem with iTunes crashing when trying to open it. Windows just generates the typical vague error message that explains nothing as to what the problem is. Uninstalling and reinstalling did not work, and using the "Repair" option did not work either.
This was the solution. Hope it works for you. Cheers.
C ;o)
Here are the steps, some might be redundant, but still follow them to try and get iTunes to work.
1. *Extremely important* Close the QuickTime launcher in the tray on the right side of your Windows TaskBar (right-click on the blue QuickTime "Q" logo next to where you have the time and date and select "exit".) The QuickTime logo should disappear from the tray.
2. Go to where your iTunes library folder is, copy it and put it elsewhere on yoour hard-drive. This is where you asked your iTunes to point to and keeps the full repository of the files sync'ed to your iPod. If you don't do this, you will have to re-create the full library of all the music and files you have put into iTunes.
3. Unistall iTunes and reboot your PC.
4. Go to c:\Program Files\Quicktime and delete this whole folder.
5. Go to c:\Windows\System 32 and: delete the Quicktime FOLDER there; then (ii) scroll down and delete all other QuickTime related files (there should be 5-10 of them, I didn't count, some will have a name like QuickTMvr whatever).
6. Empty Recycle Bin.
7. Reboot your PC.
8. Go back to Apple Website and download: iTunes, and (ii) QuickTime installation only (without iTunes).
9. Install QuickTime FIRST (use newly downloaded version)! Check it works OK by opening it.
10. Close QuickTime lanucher from tray, as explained above in step 1.
11. Install iTunes (use the newly downloaded version).
12. Open iTunes. If it opens fine (clap your hands and say "hurray", and actually I said out loud to my PC, "Please work" and it did - I don't know if this step helped at all. ;o) ), then close iTunes FIRST BEFORE DOING THE NEXT STEP. Go to where the new iTunes (and library) folder is, rename the new iTunes folder (as you might notice when/if you open iTunes, that it is all blank), and copy the old iTunes folder (from step 2) to the same location. Re-open iTunes. It should be the way it opened the last time.

Btw.
Don't forget that, from my experience, most iTunes errors comes from malfunctioning instances of QuickTime.

Actions and Advanced Actions not working correctly. - Captivate 8

In our project, we have it set so that after every section the student is asked three quiz questions (they are set on the default quiz slides.) On success, the person jumps to the next question slide. On failure, the person goes to next slide which has two buttons - one that allows them to simply move forward to the next quiz question and one that allows them to go back and review. The "Go back and Review" button takes the person back to the specific content slide that contains the answer to the question they are being asked. This button is set to advanced actions "Jump to Slide ..." and "Show Button..." - The button is a 'Return to Quiz' button to allows the person to find the answer then try the question again. I know that the buttons on the default quiz slides cannot be programmed to do a specific action, but every time we click 'Submit' it seems fine until we click 'Next' to move ahead, it then routes us back to one of the content slides (Slide 7) instead of the next slide (if wrong), or the next question slide (if right). I have looked at the Advanced Interactions Window and there is nothing linking this slide to anything. I have not had this problem with any of our other modules or sections. I have tried creating new question slides and it did not work. I deleted Slide 7 and it worked fine the first time through the preview, but then when I viewed the preview again, it started jumping back and would not even let me get to the questions. Can anyone help?

Normally the Next button on a question slide is not needed, because it has the functionality of Skipping the question. It is however needed if you want to allow Review.
Another explanation is that you did change the normal work flow for a question slide, where a two-step process for submitting will take automatically the user to the next slide.
Question Question Slides in Captivate - Captivate blog
What did you do to need the Next button? If the user submits:
Feedback appears with the indication to press Y or to click on the slide, happens at the pausing point of the Question slide (default is 1.5secs)
When user presses Y or clicks, the actions Success/Last Attempt are executed if all attempts are exhausted, and you have only 1 attempt on Question level: the actions are by default Continue, but you can change it to 'Go to Next Slide' to shorten the waiting time (or drag the pausing point closer to the end of the slide).
What did you change?

I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?

I have checked the box "display date and time on the Menu Bar" and it does not work. Using OS X Yosemite 10.10.2 Anybody have a fix?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Just bought my white iphone4 and after syncing with my computer the speaker doesn't work now. I tried reset and even restore and still does not work. Do I have to exchange?

Just bought my white iphone4 and after syncing with my computer the speaker doesn't work now. I tried reset and even restore and still does not work. Do I have to exchange?

Make sure the silent switch is not set to mute. If you can see the red dot, it is on mute.
It may think you have headphones plugged in, try plugging and unplugging a wired headset a few time.
The next step would be to restore as new.
If none of that works, a warranty exchange would be the resolution.

Padding and margin does not work in div.

padding and margin does not work in div.
though design field shows me padding effect, but at the web browser it does not work.
please let me know how to deal it.

Your HTML code is missing a closing div. I have just done a rough check on it and came out with this code:
<div class="wrapper">
<div class="container1">
<div id="header">

<img height="45" src="n_image/coaraSmall.jpg" width="53" /></div>
<div id="top">
<div id="top_inner1">
    <div id="top_inner2">
    <div id="top_inner3">
      <div id="top_inner4">
      <div id="slider1">
        <a class="buttons prev" href="#"></a>
        <div class="viewport">
        <ul class="overview">
          <li><img src="n_image/nora_big.jpg" /></li>
        </ul>
        </div>
        <a class="buttons next" href="#"></a></div>
      </div>
      </div>
    </div>
    </div>
</div>
<div id="menue">
<div id="menue_inner1">
    <div id="globalnavi">
    <ul>
      <li><a href="#">Home</a></li>
      <li><a href="#">Song 4 Happy</a></li>
      <li><a href="#">About</a></li>
      <li><a href="#">Contact</a></li>
      <li><a href="#">Other</a></li>
      <li></li>
    </ul>
    <div class="c-both">
    </div>
    </div>
    </div>
</div>
</div>
<div class="container2">
<div id="main">
<div id="main2">
    <div align="center">
    <img height="297" src="n_image/noira002.jpg" width="600" />
    </div>
    <table class="category_01">
    <tr>
      <td>
      <img height="178" src="n_image/noira002_1.gif" width="180" /></td>
      <td>
      <img alt="" height="178" src="n_image/noira002_1.gif" width="180" /></td>
      <td>
      <img alt="" height="178" src="n_image/noira002_1.gif" width="180" /></td>
    </tr>
    </table>
    <div id="step">
    I hope it is going to be good. </div>
    </div>
</div>
<div id="footter">
<div class="inner">
    <div class="footerLogo">
    <img height="92" src="n_image/side_rogojpg.jpg" width="150" /></div>
</div>
</div>
</div>
</div>
You need to copy and paste the above code in the body of your editor window and the css styles will start to work again.
Please note this is a rough check only so you need to see if the closing div tag is in the right place.

All button and touch pad not working except power button

I face the problems that all button and touch pad not working after power on or wake up from sleep state except power button. And i have make the system sleep and wake again so that the mac book air can working as normal( mouse can move and button got response).

Sometimes electrical components needs to have all power sources removed and reintroduced to work properly. Try performing a hard reset first, if it doesn't work then we'll move to the next step.
To Perform A Hard Reset
Shut down the computer by going to the Start menu and selecting shut down. (If you have no display, hold the power button down for 5 seconds); (if the computer doesn't power on, move to the next step)
Disconnect the AC Adapter from the notebook.
Remove the battery from the bottom of the notebook. There will be a switch/button to eject the battery.
Wait at least 1 minute with all power sources disconnected.
Re-insert the battery and reconnect the AC Adapter and then attempt to power on the notebook.

After upgrading to 4.0 my settings to clear history when closing does not work

After upgrading, per your recommendation, to 4.0 my history, cache, cookies, etc. are not being cleared when I close the browser, despite the fact that I have correctly re-adjusted my option settings. When I re-open the browser, not only has it not cleared anything, but opens not on my home page either, but on the last web page I was on! Why do properly set options for privacy work anymore?!

Digital Persona have abandoned their fingerprint reader and it will not work in Firefox 4. For more details see https://support.mozilla.com/en-US/questions/799388

I created an Apple ID using my ISP Email when I registered at the Store/Apple Support Communities/iTunes/Face Time and it does not work in iChat. Why Not ?

Question:-
I created an Apple ID using my ISP Email when I registered at the Store/Apple Support Communities/iTunes/Face Time or other portal and it does not work in iChat. Why Not ?
Answer:-
For a Name to work in iChat it has to be an Valid AIM screen Name.
Only Apple IDs from the @mac.com ending names registered here and the Mobileme (@Me.com ending) names are Valid with the AIM service as well as being Apple IDs
(I am still working on info about registering with iCloud at the moment but if this does give you an @Me.com email it may well be a valid AIM name as well)
NOTES:-
The @mac.com page works by linking an external (Non Apple) email with a @mac.com name.
This External Email cannot be one linked to an Existing Apple ID (you have to use a second email or register at AIM )
The options at AIM are to use your existing email or create new name and link the existing only for Password recovery
MobileMe (@me.com ending names) were valid Emails addresses, Apple IDs AND a Valid AIM Screen Name
@mac.com names look like emails but are only Apple IDs and iChat/AIM Valid Screen Names.
The AIM registration page seems to be pushing you to register [email protected] This is relatively new and I have not followed through the pages to find out if it a valid AIM email (Previously you could register a name without an @whatever.com suffix)
8:16 PM Friday; June 10, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Question:-
So I have my current [email protected] email in iChat as I thought as I had linked that to an Apple ID it was a Valid iChat Name. It keeps coming up with a UserName or Password Invalid message. What do I do next ?
Answer:-
Open iChat
Go to the Menu under the iChat name in the Menu Bar and then Preferences and then Accounts in the new window.
Commonly written as iChat > Preferences > Accounts as directions/actions to take.
If it displays with a Yellow running name in the list you have a choice.
Either register it at AIM (I would use a different password to the ISP Login) and then change the password only in iChat (It may take you to confirm any Confirmation email from AIM first) in iChat > Preferences > Accounts
Or you register a new Name at AIM (Or at @mac.com) and enter that (details below)
If you have a Blue Globe name (@mac.com) that will not Login the chances are that it the password that is the issue.
Apple lets you create longer passwords than can be used with the AIM Servers.
Change the Password at iForgot to no more than 16 characters.
Then change the password in iChat as details above.
Adding a new Account/Screen Name in iChat (that is valid with the AIM servers)
Open iChat if not launched.
Go to iChat Menu > Preferences > Accounts
Click the Add ( + ) Button at the bottom of the list.
Choose in the top item drop down either @Mac.com or AIM depending on what you registered
Add the name (with @mac.com the software will add the @mac.com bit)
Add in the password. (If you don't add it now iChat will ask you each time you open it)
Click Done.
The Buddy List should open (New Window)
The Accounts part of the Preferences should now have the new name and you should be looking at the details.
You can add something in the Description line which will then title the Buddy List (Useful when you have two or more names) and make it show up as that in the iChat Menu > Accounts and the Window Menu of iChat when logged in.
You can then highlight any other Account/Screen Name you don't want to use and use the Minus ( - ) Button to delete it.
8:39 PM Friday; June 10, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Not able to sign into Blackberry Protect. Backup and Restore function not working. "Your device isn't associated with a Blackberry ID"

Not able to sign into Blackberry Protect. Backup and Restore function not working. Message is: "Your device isn't associated with a Blackberry ID." My Blackberry Messenger and Blackberry World is working fine so I am sure its not an ID issue on the phone. I can sign into Link, Blackberry.com and Protect. I see my device in Protect but cannot send messages or view it on a map. Times out with cannot reach device message. BB Protect on Device has a swirling circle beside the on/of switch. Cannot turn off.
I have deleted Link and re-installed.
I have reset phone to default(factory) and signed in.
OS level is 10.2.1.3062
BB Link is 1.2.3.56
Solved!
Go to Solution.

I managed to figure this out myself. I had to delete the device from the Blackberry Protect website. protect.blackberry.com. I wiped my device again and signed in with my Blackberry ID. I dont know if the step of wiping was necessary as I did not try my backup with the current configuration on the device following the delete. Restore is in progress for me!

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

We're sorry.
We can't find the article you're looking for.
Please return to the Apple Support homepage.
Sigh.

My wireless keyboard and mouse do not work on my All-In-One computer?

Q.: My wireless keyboard and mouse do not work on my All-In-One computer?
A.: If your wireless keyboard and mouse do not work even after changing the batteries, please try re-syncing them by following these steps.
1. Make sure the computer is on, plug in the USB receiver. Push the button on the USB receiver until it flashes blue.
2. While the receiver is still flashing, press the red connect button on the keyboard (Make sure the batteries are installed). The USB receiver should stop flashing after pressing the button on the keyboard. It may take up to 8 seconds to sync.
3. Repeat the same process for the mouse. Push the button on the USB receiver, then press the connect button on the mouse (Make sure the mouse is on).
Note: This applies to all MSI All-In-One computers that include the ES500W wireless keyboard and SW130 mouse.

"This machine has an added 4 USB ports, could this be causing a problem?
It definitely could be the source of the problem. Perhaps the PCI card was bumped loose during shipping?
Have you tried removing the card? That's where I would start.
Keep us posted.

I downloaded Lightroom version 5.7 in order to support tethered capture on my Nikon D750 and its still not working. Additionally when I was prompted to give my serial number for the update it was no where to be found on my Adobe profile although I purchas

I downloaded Lightroom version 5.7 in order to support tethered capture on my Nikon D750 and its still not working. Additionally when I was prompted to give my serial number for the update it was no where to be found on my Adobe profile although I purchased, and am paying monthly for my creative cloud for photography. Please help

Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page
If yes
Some general information for a Cloud subscription
Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
-http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
If no
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

I have safari 5.1.7 and it's not working properly. Should I use Safari 5.1.9 or 6.0.4?

I have safari 5.1.7 and it's not working properly. Should I use Safari 5.1.9 or 6.0.4? Mac OS X 10.6.8. 17" MacBook Pro

Use your Software Update under the Apple menu, it SHOULD bring Safari up to 5.1.9 on OS X 10.6.8.
Apple IS issuing security and other updates for Snow Leopard users.
OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
Safari 6+ is only for 10.7+ users as OS X is morphing into iOS.
10.7 and 10.8 will not run your PPC based apps of 10.5/10.6
If Software Update is not working, then you have other issues, backup your users folders off the machine to a external storage drive (not TimeMachine!) and run through this list of fixes.
Most commonly used backup methods
..Step by Step to fix your Mac

Next button not working in advanced table

HI ,
I have created an advanced table programatically.everything is working fine but the navigation buttons for next and previous are not working properly.If I click on next 20 records I am getting the first 20 records.Do i need to set anything for this.Please hepl me.

Hi,
This may be the problem in your InternetExplorer.
Mini

History and Next Step not working in UWL SAP MDM 5.5 SP6 Patch 2

Similar Messages

Maybe you are looking for