History in Bookmarks shows no entries

There are no entries in the History section of Bookmarks.  How do I correct this?

Safari does have a private browsing mode in 7.1, but it's not access in settings. Open Safari and in the bottom left hand corner you'll see the private button. Make sure it's not on to be recording history.
Alternatively, did you go into Settings -> Safari and delete the history and caches?
And you should update your profile to show the current iOS version you're using so we know how to direct you.

Similar Messages

  • My Library (History/Show All History) does not show ANY History - only Tags & "All Bookmarks". What settings do I need to adjust to have this show. Nothing in the Options/Privacy seems to be relevant

    My Library (History/Show All History) does not show ANY History - only Tags & "All Bookmarks". What settings do I need to adjust to have this show. Nothing in the Options/Privacy seems to be relevant in English

    Lightning is a problem for you because it hooks into Thunderbird at a low level and you need a version compiled for the platform Thunderbird is running on. So you can't do the preferred solution, which is to put your whole profile in a shared folder and have both instances of Thunderbird reference the same profile. (Ditto for Enigmail). Lightning may become an integral part of Thunderbird in an upcoming release, at which point this limitation due to Lightning should disappear.
    And if you can't use a shared profile, you can't set your Lightning, or your Address Book, to share a common set of files. Put another way, the linkage from Thunderbird to its address book files and calendar data is hard-coded, and not exposed where we can adjust it. :-(
    The halfway house is to place your mail stores in a shared place, and use the Local Directory setting in each account's settings to connect to it. They don't need to be in the profile; what's more important in your case is that they are in a folder accessible to both operating systems.
    Look in your profile; everything under Mail and ImapMail needs to be moved out to a shared folder. Note the entries in Thunderbird under Local Directory before you do this, and reconstruct those pathnames in Thunderbird, but adjusted to suit their new locations.
    (You can see here that you need to make many adjustments, one per account, in each instance of Thunderbird, so it's a high-maintenance solution and this is why we don't recommend it when the alternative, moving the whole profile, is possible.)
    I share address books and calendars between Thunderbirds on various computers (and my phone and tablet) by syncing to something in the cloud; Google Contacts and Google Calendar are my choices, using gContactSync and CalDav.
    Having made the break myself some years ago, I'd recommend you break away from Windows. ;-)

  • When I set (on two different computers) the Location Bar to "Nothing" it resets to "History and bookmarks" as soon as I close and reopen Firefox.

    When I set (on two different computers) the Location Bar option: When using the location bar suggest: to "Nothing" it resets to "History and bookmarks" as soon as I close and reopen Firefox. I am using the latest vesion on Win8 on both computers. One has Bitdefender the othe McKafee. I have no obvious Addware, I use Iobit Uninstaller Advanced Care and and Driver manager on both computers. Until now I have always used Firefox as I refuse to use Explorer and I do not want to have to use Opera or another browser instead.
    Can you please help?

    Have you seen this general article: [[How to fix preferences that won't save]]?
    Also, this might be a glitch with using automatic private browsing mode. Some settings changes might not be saved in that mode.
    If all else fails, do you want to try a manual hack?
    Open your current Firefox settings (AKA Firefox profile) folder using either
    * "3-bar" menu button > "?" button > Troubleshooting Information
    * (menu bar) Help > Troubleshooting Information
    * type or paste about:support in the address bar and press Enter
    In the first table on the page, click the "Show Folder" button. This should launch a new window (Windows Explorer window) showing your current settings files.
    Leaving that window open, switch back to Firefox and Exit, either:
    * "3-bar" menu button > "power" button
    * (menu bar) File > Exit
    Pause while Firefox finishes its cleanup, then open '''prefs.js''' in a text editor by right-clicking it and choosing Edit or Open With. (Double-clicking leads to Windows attempting to execute it, so I do not recommend that.)
    Paste this at the end of the file on its own line:
    user_pref("browser.urlbar.autocomplete.enabled", false);
    Then save the file and close your editor.
    Start Firefox back up again. Did the manual change work?

  • I had to restart my computer and was asked to upgrade to 6.0.2. I now have no past history or old bookmarks. I needed the history and bookmarks for a project I was working on and now they are gone. I'm #?*! pissed. How do I get them back?

    I restarted my computer. After it rebooted I was asked to update firefox I did and it updated to 3.0 or something and it said update complete but it is out of date would you like to update to 6.0.2. I did and it updated again. When I got back online, I had no history or old bookmarks. History and bookmarks are there in the toolbar but when I click on them there is nothing from past history and no past bookmarks. I need them back

    Hey hey Christ1
    I think we are getting closer to this thing being solved...
    The Update --
    I have all my Mail in One of my accounts (work)....but not all the Mail in the other account (aka my Music account).....
    Both I've set up again..using your advice...and changed both now to IMAP..
    Originally after refreshing my laptop, when I set up Thunderbird....I used the POP settings.....and that's when I messed it up.....
    but using IMAP now....I've gotten more of my old emails .....in my INBOX.....not all.....but most....YIPPIE
    My SENT emails....in my Music account.....have all disappeared.......I've looked in both sent folders...in POP...and IMAP....and nothing is there...
    However my sent folder of my work account...I have SOME of the sent emails...
    Address books....Collected and Personal folders.....I have NO Email Addresses at all.
    Sooo now even though I am getting confident we will solve it.....I still have 4 accounts....aka...2 Work (POP and IMAP).....2 Music (POP and IMAP) until you tell me to delete or change one from each.....
    BOTH IMAP accounts.....do not show new messages...when they come in....however the POP shows it.....I did read that If I deleted the POP to change to IMAP I will not be able to get emails.....sooo not sure what to do about that issue now....
    Is there an "automatic" backup feature for Thunderbird...?? All this could have been soo prevented if I did that....sheesh...
    anyway..thanks so far.... :)
    Jay

  • History will only show me today history. won't show me yesterday history or any other history

    when I click on History it shows me only today history. It does not show me yesterday,7 day,or monthly history

    I have the same problem. (Version 22.0 for Windows) History is only showing me the last 15 lines. If I click on Show All History to see even what I did a few minutes ago, I'm taken to a Library that only wants to show me All Bookmarks - but shows absolutely no bookmarks even though I have many available through normal Bookmarks drop down and toolbar.

  • My browsing history recently started showing multiple "visits" under the visit count upon a single log onto a website. show 300+ "visits" on one recorded visit

    I have recently seen a spike in my data usage with Verizon. The only thing i can see that has changed is in my browsing history. I am going to the same sites i always do, but now, immediately upon hitting a site, the browsing history will show anywhere from 40 to over 300 "visits" to that site for the same date and time, even if i leave the site immediately. I believe this may be the cause for the sudden increase in data usage as it seems the browser is going out to the site hundreds of times without me telling it to.
    I tried reinstalling firefox but the problem persists.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Do you have any bookmarked pages from that site if you enter the domain in the search field in the Bookmarks and History Manager (Library)?
    *Bookmarks > Show All Bookmarks

  • How do I move History and Bookmarks from the left side bar back to the top of the window where they were for so long. Firefox 34.0.5 OS 10.8.5

    Hello,
    I moved my History and Bookmarks to the sidebar, but now can't even find those instructions. I don't like them on the side. I had them on the top for years. Thanks for your help.
    Do I get email notification on this forum?
    [email protected]
    Rafael

    I see that you have increased some font sizes.
    You might be interested in the NoSquint extension.
    You can use the NoSquint extension to set font size (text/page zoom) and text color on web pages.
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
    Make sure that toolbars like the "Bookmarks Toolbar" are visible.
    *"3-bar" Firefox menu button > Customize > Show/Hide Toolbars
    *View > Toolbars<br>Tap the Alt key or press F10 to show the Menu Bar
    *Right-click empty toolbar area
    Open the Customize window and set which toolbar items to display.
    *"3-bar" Firefox menu button > Customize
    *check that "Bookmarks Toolbar items" is on the Bookmarks Toolbar
    *if "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the Customize palette into the Customize window to the Bookmarks Toolbar
    *if missing items are in the Customize palette then drag them back from the Customize window on the toolbar
    *if you do not see an item on a toolbar and in the Customize palette then click the Restore Defaults button to restore the default toolbar setup

  • I have installed firefox Aurora, but can I uninstall it and go back to Firefox 11 if I find version 11 better? Will I lose history and bookmarks?

    I have installed the new version 13, called Aurora. I am currently using it, but if I start not liking the new features (so far I do! But I have to ask) can I "go back" to the "good old" Firefox 11?
    Will I be loosing my data and settings? History and bookmarks?
    My computer is a Pentium M 1,6GHz (2004.) and the version 11 seemed very stable. The reason I installed Aurora is because I wanted to try your new software.

    Also, before you go back to an older version (transition from Aurora to Release), you might want to back up your bookmarks and such. Usually, an older version of Firefox will be able to read your data, but this is not guaranteed.

  • Data in the cube is showing multiple entries when compared with ODS

    Hello BW Gurus,
    We have a waste report in production planning on Cube and ODS separately. The same info package loads both targets (which means same infosource) but when we run a report on Cube, the records are showing multiple entries (i.e. Key Figures are not matching when compared to ODS) where as the ODS records are showing correctly as it was in R/3. There are totally 6 key figures out of which 4 pulled from R/3 and 2 are populated in BW.
    An Example:
    Waste report in PP run for plant 1000 for 12/2005 and process order 123456. The operational scrap should be 2.46% and the component scrap should be 3.00% for material 10000000. The report is showing 7.87% for planned operational waste % and 9.6% for planned component waste %. These values are not correct. The ODS values for order 123456 matched the data in R/3 for component and operational scrap.
    There is a Start routine to the ODS and also to the cube. I am not good at ABAP so requesting your Help.
    Here is the ODS Code:
    tables: /BI0/PPRODORDER.
    loop at data_package.
    select single COORD_TYPE
    PRODVERS
    into (/BI0/PPRODORDER-COORD_TYPE,
    /BI0/PPRODORDER-PRODVERS)
    from /BI0/PPRODORDER
    where PRODORDER = data_package-PRODORDER
    and OBJVERS = 'A'.
    if sy-subrc = 0.
    if /BI0/PPRODORDER-COORD_TYPE = 'XXXX'
    or /BI0/PPRODORDER-COORD_TYPE = 'YYYY'.
    data_package-PRODVERS = space.
    else.
    data_package-PRODVERS = /BI0/PPRODORDER-PRODVERS.
    endif.
    endif.
    if data_package-calday = space
    or data_package-calday = '00000000'.
    if data_package-TGTCONSQTY NE 0.
    data_package-calday = data_package-ACTRELDATE.
    endif.
    endif.
    modify data_package.
    endloop.
    Here is Cube Code:
    tables: /BI0/PPRODORDER,
    /BIC/ODS.
    TYPES:
    BEGIN OF ys_mat_unit,
    material TYPE /bi0/oimaterial,
    mat_unit TYPE /bi0/oimat_unit,
    numerator TYPE /bi0/oinumerator,
    denomintr TYPE /bi0/oidenomintr,
    END OF ys_mat_unit.
    DATA:
    l_s_mat_unit TYPE ys_mat_unit,
    e_factor type p decimals 5.
    loop at data_package.
    select single COORD_TYPE
    PRODVERS
    into (/BI0/PPRODORDER-COORD_TYPE,
    /BI0/PPRODORDER-PRODVERS)
    from /BI0/PPRODORDER
    where PRODORDER = data_package-PRODORDER
    and OBJVERS = 'A'.
    if sy-subrc = 0.
    if /BI0/PPRODORDER-COORD_TYPE = 'XXX'
    or /BI0/PPRODORDER-COORD_TYPE = 'YYY'.
    data_package-PRODVERS = space.
    else.
    data_package-PRODVERS = /BI0/PPRODORDER-PRODVERS.
    endif.
    endif.
    if data_package-calday = space
    or data_package-calday = '00000000'.
    if data_package-TGTCONSQTY NE 0.
    data_package-calday = data_package-ACTRELDATE.
    endif.
    endif.
    data_package-agsu = 'GSU'.
    data_package-agsu_qty = 0.
    select single gr_qty
    base_uom
    into (/BIC/ODS-gr_qty,
    /BIC/ODS-base_uom)
    from /BIC/ODS
    where prodorder = data_package-prodorder
    and material = data_package-material.
    if sy-subrc = 0.
    if /BIC/ODS-base_uom = 'GSU'.
    data_package-agsu_qty = /BIC/ODS-gr_qty.
    else.
    SELECT SINGLE * FROM /bi0/pmat_unit
    INTO CORRESPONDING FIELDS OF l_s_mat_unit
    WHERE material = data_package-material
    AND mat_unit = 'GSU'
    AND objvers = 'A'.
    IF sy-subrc = 0.
    IF l_s_mat_unit-denomintr <> 0.
    e_factor = l_s_mat_unit-denomintr /
    l_s_mat_unit-numerator.
    multiply /BIC/ODS-gr_qty by e_factor.
    data_package-agsu_qty = /BIC/ODS-gr_qty.
    ENDIF.
    else.
    CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
    EXPORTING
    INPUT = /BIC/ODS-gr_qty
    NO_TYPE_CHECK = 'X'
    ROUND_SIGN = ' '
    UNIT_IN = /BIC/ODS-base_uom
    UNIT_OUT = 'GSU'
    IMPORTING
    OUTPUT = DATA_PACKAGE-gsu_qty
    EXCEPTIONS
    CONVERSION_NOT_FOUND = 1
    DIVISION_BY_ZERO = 2
    INPUT_INVALID = 3
    OUTPUT_INVALID = 4
    OVERFLOW = 5
    TYPE_INVALID = 6
    UNITS_MISSING = 7
    UNIT_IN_NOT_FOUND = 8
    UNIT_OUT_NOT_FOUND = 9
    OTHERS = 10.
    endif.
    endif.
    endif.
    modify data_package.
    endloop.
    some how the AGSU qyt is not populating in the cube and when I dbug the code, I could see a clean record in the internal table but not in the cube.
    your suggestion and solutions would be highly appreciated.
    thanks,
    Swathi.

    Hi Swathi
    In ODs we have option of overwriting and addition however in Cube we have only adition.Thats why you are getting multiple enteries.
    If you are running daily full load on the cube then please delete the earlier requests.
    So at one point of time there should be only one full load request in cube. Hope this will solve your problem.
    Regards,
    Monika

  • I have two Macs and I am using the same Apple ID on both.  All of my info, history etc is showing up on both.  How do I turn this off?

    I have two Macs and I am using the same Apple ID on both.  All of my info, history etc is showing up on both.  How do I turn this off?

    You likely have iCloud turned on in at least Safari. If you don't want Safari to sync between these devices turn one of them off. System Preferences - iCloud - Safari (uncheck the box)

  • I just installed Yosemite.  Notifications Center will not show ICal entries that were on my ICal at time of installation.  How do I get events to show in Notification Center?

    I just installed Yosemite.  Notifications Center will not show ICal entries that were on my ICal at time of installation.  How do I get events to show in Notification Center?

    Submit your feedback requesting this feature directly to Apple using the appropriate link on the Feedback page:
    http://www.apple.com/feedback

  • How do I get my history and bookmarks back to work?

    Hey guys,
    I downgraded my Firefox from version 7.0.1 to 3.6.22, because some of the really important add-ons didn't work on version 7 anymore and it said, that there were no updates for them right now. And after I downgraded Firefox, it keeps saying, that it can't create a history and bookmarks since something else is using the files required for creating history and bookmarks.
    I troubleshooted already and tried everything I could find on the Firefox Support Page, but it didn't help.
    So, I really hope you guys have any idea what else I could do to get this fixed. :)
    Sincerely,
    Ghosty

    Do NOT take any option that says something like remove personal settings, because that is likely to remove profiles from all normally installed versions of firefox resulting in the loss of bookmarks, passwords, and other settings.
    It is too late to help now, but it is always good practice to somehow back up your bookmarks e.g. manually
    * see [[backing up and restoring bookmarks]]
    Firefox does try to keep backups, but they are in your profile, and can get corrupted or deleted in some circumstances
    * see also [[lost bookmarks]]
    Can you post the exact wording of the message it may help in working out what is happening ?
    It will certainly be worth starting in Firefox's [[safe mode]] by for example holding the shift key as you start, or using the menu option.
    * do not make any changes on the first option window you see, just click on continue
    * use only the default theme
    * if it does not improve then whilst still in safe mode temporarily disable all plugins
    See also
    * http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox <br> note in particular the mention of the add-on to rebuild the database
    * [[Firefox is already running but is not responding]]
    It may well be a sensible precaution to preserve the current situation/data by backing up your profile by simply copying it and its folders and files to some location such as your desktop. (Quickest way to find its location firefox button -> help -> troubleshooting information -> profile [open containing folder] )

  • In the navigation Toolbar following the yellow bookmark star you find a small blue triangle. When you click it a number of bookmarks show up. How can I add new booksmark to be displayed out of my unsorted bookmarks? Thanks.

    Dear Sir, Mam,
    In the navigation toolbar on the right side of the bookmark yellow star you find a small blue triangle. When you click it, some of the selected bookmarks show up and can be called up immediately.
    I have deleted some without problem, but I could not add new ones. I would like to have there at least 10 items.
    Please explain how to add new bookmarked items to this shortcut list. Thank you, sincerely Th. Brandt. [email protected]

    Is that the Bookmarks Menu button ?
    *https://support.mozilla.org/kb/how-do-i-use-bookmarks
    *https://support.mozilla.org/kb/common-questions-after-updating-firefox
    *http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
    *https://support.mozilla.org/kb/Sorting+bookmarks

  • From certain websites, when I click on an icon, a get a blank page with a box that says "Mozilla Firefox" above and in the box, "History and Bookmarks". I click on that and then must wait half a minute for the correct screen to open

    If I open Weight Watchers, for example, and then click on the Plan Manager icon, the above screen comes up and hides the WW screen. I click on "History and Bookmarks". Then wait. Finally the Firefox window disappears and the requested window opens. This is a new phenomenon. It did not happen when I was a member 4 months ago. This is not just for WW, however. Happened with some other website, too. Can't remember

    Do a malware check with some malware scanning programs.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.<br />
    * http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    * http://www.superantispyware.com/ - SuperAntispyware
    * http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    * http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    * http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    See also:
    * "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • On a website clicking on highlighted text in blue, the browser should take you to info on that subject. My Firefox opens a blank page and says "search history and bookmarks." How can I make it go to the info highlighted in blue text? Ver 3.6.15

    Usually the browser will take the user to info pages when a click on blue text is done. My browser just opens a blank page and has "search history and bookmarks and then just sits there. I can change that so it will do nothing and the message is "type a web address". It used to work fine. How can I fix this.

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

Maybe you are looking for

  • Brand New Mini-DVI to Video Adapter for sale

    I bought this adapter this past june, I've used it only a few times, it is a great thing to have, but since I recently sold my powerbook for an iMac, I cannot use this adapter. So I am selling it half price on ebay, here is the link. EBAY LINK

  • How to access a infoset query

    Hi I am assigned to a user group P1   but how to use the tcode SQ02 AND SQ03 Whether to use TCODE SQ02 in first place or the other as i was unable to get in there To get into the infosetquery . Regards P

  • Best practise to feed an infoobject which depend on 0MATERIAL ?

    Hi experts, I'm a newbie on SDN and SAP BW. I have a question that could appear basic for you. I have to add a new infoobject "Article Typology" in a BW query. I will call it ZTYPOLOGY. This infoobject will contains 3 values which will depend on the

  • Where we use Conversions? like Fixed Value and Value mapping? and use of th

    where we use Conversions? like Fixed Value and Value mapping? and what is the use of that....

  • Best Xserve recommendation for Ad Studio

    Could any please provide best recommendations for Xserve with Ad Studio comprising Raid 5 3-6 TB storage, 10-20 Macs with 3 power uses wanting to work live on 2-3GB files. The xserve will also be connected to existing windows server for exchange mail