History in notification & suborder history

Dears
We have observed that if the work orders have more than one operation only first operation is entered in the history what about other operations in work order
WE require control that any executed operation (CNF OR PCNF) need to enter history in the system in notification
There should not be teco allowed unless all history is filled.
How we can achieve this?
Also where we can maintain the history in the suborder
So like main order history can be captured in notification what about suborder history how to capture in notification please explain to me how we can achieve this
Regards
chandrahshekhar Ingole

HI
See history lies in notification
We create work orders only from notification exceprt GPM & Emergency work orders
Once notification is crated we convert this Notification into work order
Say work order has 5 operations
people do not confirm all operations here we want to put control that they should write all operation details in confirmation say he has not executed 2 operations then he should write operation not executed in time confirmation iw41
then when status becomes CNF all operations executed then only he should be allowd for TECO
secondly at teco we are closing notification
Only first operation history is in the notification here also enduser should write all the operation causes & codes in notification
say 5 operations are there in work order then notfication should also have 5 causes with codes
then only it should allow teco
I will explain in more detials if you require
also suborder details are not enterred in notification they also wan tthis history to be recorder in notficiation
Regards
cahndrahskhekhar

Similar Messages

  • Push Notifications. The Message "Connect to iTunes to Use Push Notifications "BBC History Magazine" notifications may include alerts, sounds and icon badges" keeps coming up in Newstand, also happens with National Geographic Magazine. HELP!

    The Message "Connect to iTunes to Use Push Notifications "BBC History Magazine" notifications may include alerts, sounds and icon badges" keeps coming up in Newstand, also happens with National Geographic Magazine. HELP!
    I have now followed multiple instructions from this and other forums. have turned push notifications off. Turned them on. Have updated to IOS 6. Have signed out and signed back in, have uninstalled all magazines and reinstalled. Have synced, and updated everything in iTunes.
    Nothing works,. Also cannot use youtube.

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    It might also be a good idea to contact Square for assistance.

  • Notification status at date in history

    Hi goeroes,
    do you know which function module to use to get the status of a certain notification at a certain date?
    For instance, I would like to know which notifications where all open on the 25th of October?
    Thanks!
    Best regards, Peter

    Check table JCDS (change history for status table JEST)
    JCDS-OBJNR = QMEL-OBJNR
    Regards
    Luke

  • Task History in Email Notifications

    Hi,
    I am sending the ADF page as an email notification to the users. This page has the history components. However, i could not see the history in the email.
    Do i have to do any additional settings?
    Thanks,
    Lakshmi.

    i think standard notification doesn't support this.

  • Purchase order Notification Summry Notification history not updating

    I created one PO, and sent it for approval, in approval hierarchy, someone person X chose to use request information and sent it to some person Y, now person Y responded and person X gets notification for same, but when person X opens that notification, the history is not updated, i.e. it doesnt have 2 lines saying that Requested information from person Y and then person Y responded to it. but after 20 mins or so, when person opens same notification again then it has all the information, why this lag of 20-30 mins?

    To add to my earlier comment;
    The lag is because of 2 reasons.
    1) The workflow background processor is running every x minutes. So it takes time to process the po approval workflow.
    2) The notification mailer is running every y minutes. So after a notification is created, it takes y minutes to actually send an email out.
    You can avoid the delay caused by step1, you can set PO:Workflow Processing Mode to ONLINE. This will process the approval right away (instead of waiting for the workflow background process to run.)
    However, you will find that users don't like this option because they have to stare at the hour glass for a few seconds while the PO is being processed.
    Hope this helps
    Sandeep Gandhi
    Omkar Technologies Inc.
    Independent Techno-functional Consultant
    513-325-9026

  • Notification Action History not showing all the approver's details.

    Hi All,
    I have a custom workflow which will require many approvals
    A1 -> A2 -> A3 ->A4 , when the notificatoin come to A2, the action history shows the from as the sender and to as the A2.
    But when it comes to A3, the old entry is not coming, getting only the current user details.
    I have chekced the checkbox "expand roles" .
    How to get all the old approver;s list in the action history.
    Thanks,
    With regards,
    Kali.
    OSSI.

    Hi,
    When the second notification is sent, that is a different one from the first, so it will have no history.
    If you want the history of all the notifications in the flow, then you will need to write something to build this dynamically and include that in the notification - populate the #HISTORY attribute on the message with the history you want to include.
    HTH,
    Matt
    Edited by: Darryl Burke -- advertisement and links removed

  • MAM 3.0 - Missing Notification History

    Having configured the notification history to display the last 3 notification or 10 days, no history is being selected. The order history settings are the same and they are being displayed.
    If I look at the backend R/3 system, there are many notifications which should be selected. Is the selection based on retrieving notifications using the notification selection variant from the notification profile or are the notifications selected from the functional location and history settings in the general settings config?
    John Woodland

    Hi,
    first of all, check the result if you run the GETLIST/GETDETAIL handler for MAM010 on the backend. Is the information available there now? I would expect it if you have configured it correctly in SPRO.
    If that is not the case - check your setup in SPRO again.
    If data is there, replicate MAM90 and MAM095 again - this contains the SPRO config for these users. Then try to sync again. If this does not help, reset the client and sync again.
    Hope this helps!
    Regards,
    Oliver

  • Wait on Notification from Multiple behaves the same with or without History

    I'm running this VI on a cRIO-9066, and both "Wait" functions behave the same. After reading the LV Help, I would expect the "With Notifier History" one to return an array of two elements, not one. Is this a bug?
    (Attachment is LV 2014 SP10
    Solved!
    Go to Solution.
    Attachments:
    Untitled 2.vi ‏11 KB

    Staab_Engineering wrote:
    After reading the LV Help, I would expect the "With Notifier History" one to return an array of two elements, not one.
    Why? Unlike the help for W4MN, the one for W4MNWH is not explicit in saying that it continues as soon as one of the notifiers gets a notification, but it also doesn't say it will wait for all of them. Your example clearly shows that it continues as soon as at least one has a notification.
    I'm too tired at the moment to work through the W4MNWH use cases, so I have no particular expectation for how it should behave.
    Try to take over the world!

  • Notification is sent to a Role, but Action History display one member only

    We have created an approval notification for HR which is sent to a Role. The role has 3 members. The email is successfully sent to the 3 members of the role (expand role is checked). However, on the Action History of the Notification Details, it shows that the submit action to was for 1 member of the role. This is misleading as actually, action is for the role (and the 3 member of the role). We would like the information here to be factual. Show that that the action was submitted for the role or show everyone who received the notification. Can that be done?
    Thanks.

    Any light on this ?

  • How do i close safari iCloud history and safari notification center

    how do I close safari iCloud history and safari notification center?

    Installation prompt to close SafariNotificati
    https://helpx.adobe.com/acrobat/kb/install-prompt-close-safarinotificati.html

  • Hiding phone number in Notification history

    Hi PM Gurus,
    I need a simple tip regarding notification history:
    When a user make a change in the Notification description it's being showed its user id, the date and also the phone number. I know the phone number come from user profile and we cannot touch on that.
    Is there any other way to hide this information (for example via customizing)?
    Thanks in advance.
    Michel

    Hi,
    I think you are talking about the log line in the notification long text. You can switch off the log line entry through customizing.
    IMG:
    -Plant Maintenance and Customer Service  -Maintenance and Service Processing -Maintenance and Service Notifications -Notification Creation -Notification Types -Define Long Text Control for Notification Types
    Select a notification type then see log line flag.
    The log line can be switched off but you can still protect the existing text with no text change flag.
    I don't think there is any way to configure the actual information on the log line, it is either on or off.
    -Paul

  • Notification on history changes

    Hi all,
    we have some users have the rights modifying some parts in ServiceManager on properties of differet Configuration Items. Now it would be great if the Administration reach an Mail on defined (not all) propierties changed. Like a filter on Keyword on the General
    available history. Always with oldValue -->NewValue.
    Is here somthing possible? I tried to realize this with Powershell and SCORch but all do not work :-(
    Perfect would be if some users could be take out ... this users are trusted and there is no Need for an ChangeMail on Object!
    Please give a Little help for me :-)
    many Thanks

    I have not the data for Configuration items in it...it is only for incidents!
     And the same logs for different Configuration Items like Servers and so on are in really bad Quality for bulding alerts. And a realtion to the user i cannot find, too.
    General i´m not so happy in triggering somthing directly out of DB...do you Trigger for your incident this in the named way?

  • Transfer history notifications from one system to another using ale/inotif

    Hi experts,i wan't to transfer 15000 completed,historical notifications from one sap system top another.
    I use ale configuration to do this.
    I have set rfc connections,message type,distribution model and i've generated partner profiles.
    My question is how can i create thenotification idoc?
    In MM with message type matmas using transaction code bd10 we send materials creating idoc.In my case for notifications i read that i can do this using transaction code inot.But i am doing this and a mesage:notification rejected appears.
    I then try to distribute the model and a rejection message appears with
    Reason: Distribution model is currently being processed .
    Can you suggest something??
    I've read tha i might will need to create badi..

    Hi Dear,
    its possible only with the help of ECM , you need to do some work around too.
    ECM should be extended to include the classification. In fact, the EXACT SAME change number should be used. In PLM, it's important that all of the changes related to a material become active in a cohesive unit. We can talk about those details if you need some background.
    Unfortunately, in the split-client scenario, you're toast on any hope of using the same ECM number, due to the internally defined number range. The best you can do is create a new, externally assigned number range in the production client, and generate the number internally in the staging client. You can then make the change in the staging client and ALE it over to the productive client.
    The next nasty part is going to be retroactive changes. You can't simply back-date a change. You have to change every occurrence of a dependency, class, characteristic, etc, that has existed in production as of that back date. So, the smartest practice is to never allow any back-dated changes. Require orders to be cancelled and re-created with the new effective date.
    Check and revert back.
    Regards
    Ritesh

  • Regarding the PM Maintainenace notification history

    Hi All,
    I am trying to create the maintainenace notifications through the standard BAPI function module BAPI_ALM_NOTIF_CREATE and doing the transaction COMMIT, but the notification is not creating in the database. I tried in so many ways to post the notification through this and some other function modules. None of the function modules are creating the notifications. Please let me know if any mandatory parameters need to pass for the function module.Please reply back to me with the solution , its urgent.
    Thanks,
    Satheesh

    Here chk the code : Use the BAPI 'BAPI_SERVNOT_CREATE' instead of BAPI_ALM_NOTIF_CREATE
    data : t_bapi2080_notpartnri TYPE STANDARD TABLE OF bapi2080_notpartnri WITH HEADER LINE.
    t_bapi2080_notpartnri-partn_role = 'AG'.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
    input = wa_final1-partner
    IMPORTING
    output = t_bapi2080_notpartnri-partner.
    APPEND t_bapi2080_notpartnri TO t_bapi2080_notpartnri.
    wa_bapi2080_nothdri-code_group = 'NEW/CONN'.
    wa_bapi2080_nothdri-coding = wa_iflot-zz_vendor. "WA_IFLOT-ZZVAPLZ.
    wa_bapi2080_nothdri-funct_loc = wa_final1-zz_haus.
    wa_bapi2080_nothdri-desenddate = l_date.
    wa_bapi2080_nothdri-short_text = 'New Connection'.
    CALL FUNCTION 'BAPI_SERVNOT_CREATE'
    EXPORTING
    notif_type = 'S1'
    notifheader = wa_bapi2080_nothdri
    IMPORTING
    notifheader_export = wa_bapi2080_nothdre
    TABLES
    notiftask = t_notiftask
    notifpartnr = t_bapi2080_notpartnri
    return = t_bapiret2.
    Reward points if useful.
    Rgds,
    Abhi

  • How did old Safari History Items I haven't visited in years appear recently?

    I upgraded to Mountain Lion on Saturday October 13th. I then ran software updates, and got everything up to date. I was home alone, and the only thing I went to YouTube for was to get guidance for setting up Facebook and Twitter notifications. That's it. Today, using spotlight, some Safari History Items appeared for October 13th, 2012 for sites I haven't visited in years. However, none of them show up in my Safari Histroy. What gives?
    Please help! I'm being accused of looking at inappropriate material when I didn't.
    I'm at a loss to explain what really happened. Any concrete help will be greatly appreciated

    Triple-click the line below to select it:
    ~/Library/Caches/Metadata/Safari/History
    Right-click or control-click the highlighted line and select Services ▹ Open from the contextual menu. Delete the contents of the folder that opens. Quit and relaunch Safari.

Maybe you are looking for