History in routing

Hi SAP Gurus,
I have a scenario where in the engineering people want to have a history of routing to be maintained. Is it possible in SAP? To explain in detail lets say to manufacture a product it is going through a work center-xxxx, machine hrs-yy and labor hrs -yy. Now lets say my labor time has reduced and so is my machine hrs or maybe we are producing the product through diffrent work center, then we create a different routing right? In this case i do not want to lose the track of my previous routing and after some time when i look back i still want to be able to know the previous detail of my earlier routing? can anybody help me with this?
Thanks
Anusha

In you current here you are creating two routing with group counter 1 and group counter 2, offcourse later on you can see all the routings for your product.
you can use Engineering Change Management for more control over history.
Regards,

Similar Messages

RV-120W:How to check the website history in router?

How can i check the website history in router?I want to know the website which the user explored through the router.

Hi Aaron, this feature set is not available.
-Tom
Please rate helpful posts

Viewing and Deleting internet history on Router (

Hi,
This is my first post on this website.
I would like information on how to view and delete internet history on a router. I have a linksys router (Default SSID is AFAQ wireless) and I would like to view the internet history. Mainly what internet sites have been visited on my router. I am able to get onto the http://192.168.1.1/ webpage but can't see any options for viewing and deleting visited websites/pages.
Any help you can provide would be much appreciated.
Thanking you in advance.
Solved!
Go to Solution.

Which router are you using?
In most Linksys routers, you must enable "logging" to get the router to record the web sites you visited. Even when you do this, generally only the IP address is recorded, not the name of the website.
Logging in Linksys routers is primarily designed for diagnostic purposes. If you leave logging turned on full time, it will slow down your router when the router memory becomes full. Therefore, in general, you should turn off logging.
Windows keeps a good record of the web sites you have visited. Look in "History" for this info.

ASA does not propagate routes to VPN users

Good afternoon
I´m having an issue regarding the propagation of routes to VPN users that authenticate through the asa tunnel-group.
I have a VPN-Users-Pool from where my users receive their IP address, and after authentication and the tunnel is established the idea is for the user to get to the following networks defined in the following ACL:
access-list Inside standard permit 10.1.0.0 255.255.0.0
access-list Inside standard permit 192.168.15.0 255.255.224.0
Now the problem is that after the tunnel is established the only route the user receives is the default route (which is not suposed to be sent). The user does not receive the specified routes in the ACL above. He also does not receive the netmask and assumes a /8 netmask (given that the network pool from where he is receiving the IP is a class A network).
The network routing is working as expected (when I add the static routes directly to the users PC, everything works OK). It´s just the issue of the ASA not propagating the routes as it should.
Here are my split tunneling settings:
group-policy DefaultRAGroup attributes
vpn-idle-timeout 1
vpn-tunnel-protocol l2tp-ipsec
pfs disable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value Inside
group-policy DfltGrpPolicy attributes
split-tunnel-policy tunnelspecified
split-tunnel-network-list value Inside
Any ideas?
I apreciate your help
Best regards

ajaychauhan
Thank you for your reply. I´m sending the config bellow (I´ve cleared all info confidential such as IPs, passwords, timeout values, etc, but i think what you have bellow is enough to get a clear picture):
ASA Version 8.2(1)
hostname asa-xxxx
enable password xxxxxxxxx encrypted
passwd xxxxxxxxxx encrypted
names
interface GigabitEthernet0/0
nameif outside
security-level 0
ip address 197.X.XX.XX 255.255.255.248
interface GigabitEthernet0/1
nameif vpncorp
security-level 50
ip address 10.X.XX.XX 255.255.255.248
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
speed 100
duplex full
nameif mgmt
security-level 100
ip address 10.x.xx.xx 255.255.255.240
management-only
ftp mode passive
dns server-group DefaultDNS
domain-name zz.df.es
access-list Inside standard permit 10.1.0.0 255.255.0.0
access-list Inside standard permit 192.168.15.0 255.255.224.0
pager lines 24
logging enable
logging timestamp
logging buffer-size 14000
logging buffered debugging
logging asdm debugging
logging facility 21
logging host mgmt 10.xx.x.x
logging class auth trap informational
logging class config trap informational
logging class ha trap informational
logging class sys trap informational
logging class vpdn trap informational
logging class vpn trap informational
mtu outside 1500
mtu vpncorp 1500
mtu mgmt 1500
ip local pool VPN-01-pool 10.XX.XX.X-10.XX.XX.XX mask 255.255.252.0
ip local pool VPN-02-pool 10.xx.xx.x-10.xx.xx.xx mask 255.255.252.0
ip local pool VPN-USER-pool 192.168.xx.x-192.168.xx.xx mask 255.255.0.0
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
route outside 0.0.0.0 0.0.0.0 197.xx.xx.xx 1
route vpncorp 10.x.x.x 255.xx.xx.xx 10.xx.xx.xx 1
route vpncorp 10.xx.xx.xx 255.255.0.0 10.xx.xx.xx 1
route mgmt 10.xx.xx.xx 255.255.255.0 10.xx.xx.xx 1
route mgmt 10.xx.xx.xx 255.255.255.248 10.xx.xx.xx 1
route mgmt 10.xx.xx.xx 255.255.255.0 10.xx.xx.xx 1
route mgmt 10.xx.xx.xx 255.255.255.255 10.xx.xx.xx 1
route mgmt 10.xx.xx.xx 255.255.255.255 10.xx.xx.xx 1
route mgmt 10.xx.xx.xx 255.255.255.255 10.xx.xx.xx 1
dynamic-access-policy-record DfltAccessPolicy
aaa-server mgmtt protocol radius
aaa-server mgmtt (mgmt) host 10.xx.x.xx
timeout xxx
key xxxxxxxxxx
authentication-port xxx
accounting-port xxxx
aaa-server mgmtt (mgmt) host 10.xx.xx.xx
timeout xxx
key xxxxxx
authentication-port xxxx
accounting-port xxxx
aaa-server Users protocol radius
accounting-mode simultaneous
interim-accounting-update
aaa-server Users (mgmt) host 10.xx.xx.xx
key xxxxx
authentication-port xxxx
accounting-port xxxx
aaa-server Users-2 protocol radius
accounting-mode simultaneous
interim-accounting-update
aaa-server users-2 (mgmt) host 10.xx.xx.xxx
key xxxx
authentication-port xxx
accounting-port xxxx
aaa authentication ...
aaa authentication ...
aaa authentication ...
aaa authorization ...
aaa accounting ...
aaa accounting ...
aaa accounting ...
snmp-server ...
crypto ipsec transform-set ...
crypto ipsec transform-set ...
crypto ipsec transform-set ...
crypto ipsec transform-set ...
crypto ipsec transform-set ...
crypto ipsec transform-set ...
crypto ipsec security-association lifetime seconds xxx
crypto ipsec security-association lifetime kilobytes xxx
crypto dynamic-map vpn-ra-dyn_map 10 set ...
crypto map outside_map 100 ipsec-isakmp dynamic vpn-ra-dyn_map
crypto map outside_map interface outside
crypto isakmp identity address
crypto isakmp enable outside
crypto isakmp policy ...
authentication pre-share
encryption xxx
hash xxx
group x
lifetime xxx
crypto isakmp policy xxx
authentication pre-share
encryption xxx
hash xxx
group x
lifetime xxx
telnet timeout xxx
ssh 10.x.x.x 255.255.255.255 mgmt
ssh timeout x
ssh version x
console timeout x
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy DefaultRAGroup internal
group-policy DefaultRAGroup attributes
vpn-idle-timeout 1
vpn-tunnel-protocol l2tp-ipsec
pfs disable
split-tunnel-policy tunnelspecified
split-tunnel-network-list value Inside
default-domain value xx.xx.es
group-policy DefaultRAGroup_1 internal
group-policy DefaultRAGroup_1 attributes
vpn-idle-timeout 1
split-tunnel-policy tunnelspecified
username ...
username ...
username ...
tunnel-group DefaultRAGroup general-attributes
authentication-server-group (outside) Users
accounting-server-group users
default-group-policy DefaultRAGroup
tunnel-group DefaultRAGroup ipsec-attributes
pre-shared-key xxxxx
tunnel-group DefaultRAGroup ppp-attributes
no authentication chap
authentication ms-chap-v2
tunnel-group asa type remote-access
tunnel-group asa general-attributes
address-pool VPN-user-pool
authentication-server-group (outside) test
accounting-server-group test
tunnel-group asa ipsec-attributes
pre-shared-key xxxx
tunnel-group asa ppp-attributes
no authentication chap
no authentication ms-chap-v1
authentication ms-chap-v2
tunnel-group tstvpn type remote-access
tunnel-group tstvpn general-attributes
authentication-server-group (outside) users-2
accounting-server-group users-2
default-group-policy DefaultRAGroup
tunnel-group tstvpn ipsec-attributes
pre-shared-key xxxx
tunnel-group tstvpn ppp-attributes
no authentication chap
authentication ms-chap-v2
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum xxxx
policy-map global_policy
class inspection_default
inspect xxxx
inspect ...
service-policy global_policy global
prompt hostname context
Cryptochecksum:xxxxxx
: end

Why does IE8 running on XP and Win7 Virtual Machine deletes the history while I'm still browsing the same site with client-side hashbang routing?

Hello,
I have a asp.net mvc 5 web application running on .net 4.5 hosted on my local windows 8 machine on macbook pro using parallels. I'm running Internet Explorer 8 Version: 8.0.6001.18702 running on XP and Version: 8.0.7601.17514 running on Windows 7 Enterprise.
I've got both of the virtual machine source from www.modern.ie
My web application is attempting to provide single page user experience by having some client-side routing by using '#!/xxx' hashbangs in the url so that I can get and post via ajax and change the hash in the url without causing the page to reload. My
code works fine in IE9+ and other modern browsers.
However, I'm facing this strange issue in both of the IE8 versions. When running my demo app in IE8, I can login, view home page and can navigate from this home page to many details page. From the very first login page, all the pages are the result
of form's post action via ajax which then expects html from server and loads in the DOM. The page structure of my app is like summary form => Details page (can also contain summary forms) => Details...so on.
The above process works fine for few of the navigation steps. If I keep navigating from one page to another & go back, I have observed that the browser back button is removing the history items slowly. And a time comes when it totally forgets about
all the history pages that I visited to reach this current page I'm viewing!! It treats like I have just started my browsing session and this current page is the first page I've landed on with no back option. Now if I again try to navigate, I have encountered
problems like both the back and forward buttons gets disabled.
Hope, my words above is clear enough to explain this problem. The same application works fine in IE9+ and other browsers.
Till now, I have tried following steps on both VMs:
Resetting IE8.
Increasing disk space to 1024mb for temporary internet files storage.
Setting 'Never' for Check for newer versions of stored pages.
Disabling the automatic crash recovery feature didn't helped in this case. Found this on support website.
Deleted temporary files, history, cache, etc many a times.
Search many forums, posted question on StackOverflow, ASP.NET
Forums - but didn't helped.
Tried 'beforeunload' event of browser to see if any of the page is reloading because of submit or any other reason. But the page doesn't reload at all.
The issue is browser forgets about the browsing history while I'm still browsing the same site.
Is there any possible fix for the issue above? Does IE8 have any issues as many ajax form post is happening on every page?

I have really tried many things to identify any possible reason of the issue above. Even rewrote all my javascript navigation code and checked server-side code.
But the only place where I got the solution is at site: http://www.enhanceie.com/ie/bugs.asp which states that there is a bug in IE8 which reads like:
IE0012: IE Travellog broken when navigating back/away from a page with
a large POST form If there is a form input field with a value longer
than 523,659 characters, when you navigate away from the page, IE may
clear the current session's travellog (similar to history), disabling
the back and forward buttons. Repros in IE6 & IE7.
There are following solutions that you can go for:
- Check for the input field that has lots of characters as mentioned above and solve your problem.
- If you have control over the system where IE8 will be used, you can add the following registry key on that machine. There is no existing key, so, you need to add a new one:
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\TravelLog] "MaxSize"=dword:ffffffff
I am really relaxed to find this information as I spent really long time to solve this issue. Hope this will help someone.

Send a mail with change history while changing the Routing (T-Code CA02),

Hi All,
I need to send a mail with change history while changing the Routing (T-Code CA02), Please let me know how can implement this scenario.
I am trying to find out any workflow is there for the same but we have workflow for Routing creating and Display, we donu2019t have workflow for change.
Please suggest meu2026u2026u2026u2026
Thanks,
Amjad.

Hi All,
I need to send a mail with change history while changing the Routing (T-Code CA02), Please let me know how can implement this scenario.
I am trying to find out any workflow is there for the same but we have workflow for Routing creating and Display, we donu2019t have workflow for change.
Please suggest meu2026u2026u2026u2026
Thanks,
Amjad.

Database tool for routing table history changes

Dear Community, I'm looking for a freeware tool to hold history changes in routing tables for small to medium network running BGP, OSPF and MPLS VPN routing tables via VRFs. This tool need a way to compare the database in order to know if these are the same during the time.
Is there a way to do this in Cisco Works?
Thanks in advances for your recommendations.

Julius,
There are no industry recommended open source DB tools.
Normally it depends upon the developer preferences that how he/she wants to see the tool usability.
I can suggest you to go through the below link:
http://sourceforge.net/search/?type_of_search=soft&words=SQL+Tools
You can find many open source SQL tools, which you have to test and select one among them.
I can suggest you to use:
1) TOra
2) Easy SQL
3) SQuirrel
"Choose a Tool which is easy to use and efficient, Dont worry about Look n Feel"
Best of Luck

I have some concerns about places my teen is visiting on the internet. The history is always cleaned and i am wondering if there is a way to see what websites have been visit throught the airport router? thanks

Hi pretty self expalanotory as in the title. I just want to know if there is a way to access website history that is maybe stored right on the router. Any assistance woudl be appreciated. I am not just a nosy Dad but I am very concerned about unsafe activity that my son may be researching. Thank you.

.there is no way to access historical website history on the router
Correct
but if I installed OpenDNS then I could track sites visited?
Correct, but you may need to install some software on each computer that you want to be able to monitor in the household. OpenDNS will walk you through the setup.
If you want to go back in time, there are also professional applications (read very expensive) that will reveal the browsing history of a given computer.....even if the browsing history has been erased by the user.
You will have to have physical access to the computer to use these applications. Post back if you need a few names.

Is there a way to get more detailed information through web history logs through the router

I have several people living in my household and connected to my router. I want to know if there is a way to get more specifics from my history log through my wireless connection. I own a cisco linksys modem and router and would like to know how to access that kind of information or if there is a way of doing so. Is there a software you can use to connect to your router done way or any way to use your router to get more information than what is presented through the logs as they are?

Hi Crimsonrain,
What is the model number of your router?

Router bandwidth log, web page history by ARP

Does anyone have setup either through the Verizon router or a peripheral device a bandwidth log with web page history by ARP?

can you please provide the detailed instructions. I'm unable to get a web history for my router. Please advise

How to delete routing history from MAPL table ?

Hi,
I have one typical case: for one routing entry is available in MAPL table but not in table: PLPO & PLKO. Now user want to change UOM in MM and routing history is restricting him for changing the same.
I tried to delete the history with Tac: CA98 with correct selection criteria and key date but it's saying no task list exist. Also used ca99 but that also didn't work and say the same thing as above. In CA02 & CA03 also, it's not showing the data.
I created one more routing for the same material and than deleted with CA98. It worked and entries were deleted from all the three table.
Can anybody suggest how to delete history from MAPL table ?
Thanks & regards
Edited by: VINAY TAILOR on Jan 22, 2008 8:00 AM

The solution is: there is no T code available for removing the history only from MAPL table. Infact, it's very strange case and we are also not able to find out how it happened.
When we asked user to repeat the procedure, everything work well and no such repetation of problem.
Only solution could be, developing special program which can remove the history. This is just for your information and thanks for putting your efforts & time.
I am rewarding points to you all for the same.
Vinay.

Does airport collect browsing history, or can it collect browsing data on any device connected to the router?

Does airport express automatically collect the history of any device that uses the wifi of the router it's connected to, or is it possible for the airport express to collect data?

If you are using AirPort Utility 6.x on your Mac, there are no "logs" or "statistics" that record or keep track of devices that have connected to the AirPort in the past.
It is possible to see some limited information about devices that are currently connected to the AirPort, but when they connected is not displayed.

Track Routing history

Hi all,
Is there any way we can track changes in routing or rate routing. i.e who made the changes.
Please let me knwo.
Regards,
Suman

GO to CS02 and click the Matlassigment.
The control key contains various parameter that determine whether the operation is relevant to sceduling. U can maintain the contril key using OPJ8.
U can do in Change routing: Operation overview.
Kevin

Not realizing clearing cookies didn't effect some tab history - couldn't reach a previously accessable site regardless of what route I got to the login window and only cured by removing offending tab - Is there a better way?

Normally reach a data base through a sign-in panel provided by the
library. When using experienced an interruption, then what was a
different method of accessing the data base appeared. The next
attempt to log in some days later put me in on "terms of use" page
with no further links.
Could sign on correctly using a different browser on my linux account, and using Firefox on my wife's linux account, but not using
Firefox on my account. Clearing cookies under the options given
in the tools "Clear Recent History" did not work. Finally fixed
problem by deleting the tab I had been using when interrupted.
Don't need a fix, as I'm back on track. But would appreciate
some explanation of what my tab was doing.
tools option did

Normally reach a data base through a sign-in panel provided by the
library. When using experienced an interruption, then what was a
different method of accessing the data base appeared. The next
attempt to log in some days later put me in on "terms of use" page
with no further links.
Could sign on correctly using a different browser on my linux account, and using Firefox on my wife's linux account, but not using
Firefox on my account. Clearing cookies under the options given
in the tools "Clear Recent History" did not work. Finally fixed
problem by deleting the tab I had been using when interrupted.
Don't need a fix, as I'm back on track. But would appreciate
some explanation of what my tab was doing.
tools option did

Ok, I deleted all my safari history online and in settings. My iphone is always on my router's wifi, will my history show up on it's hard drive?

Just curious.

Since you do not identify the make/model/version of the equipment that you are using no one can possibly even attempt an answer to your question.

History in routing

Similar Messages

Maybe you are looking for