History log calls, name changed

I received a call from a person A and in the history log call is shown as person B, but if I try to call it link me to the person A who originaly called me. It semmed that changes the names. It is a mess. It started to happen after butt upgrading to v. 10.1.0.273 in the z10. Is there any fix? Thanks

Hi and Welcome to the Community!
Unfortunately...refer:
KB34577 Caller ID shows incorrect contact information for incoming calls and calls placed from the call log go to a different phone number than intended
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

When logging onto a web site with a log on name firefox is changing logon name from Kostas to kostas as the site is case sensitive it is not acceptable. how do I correct this? Thanks

I registered with a web site and used the name Kostas as the log on name. Entered a question and recieved replies
When I later tried to log onto the web site to say thankyou ,and enter Kostas in the log on box a reminder appears created by Firefox of kostas, I ignore this, move to the password box and firefox changes the log on name to kostas with small k. The register is case sensitive so for quite a while I could not understand what was going wrong? I eventually managed to log on by using a rival system
My previous experience is that if you use a different log on name it is recorded and then you choose the correct one to use? But in this case I am given no choice
How can I correct this please
Probably no connection but
I registerd with another site and recieved an e-mail in which I had to click on web address to confirm registration and came up with an error message, tried a few times and same thing happened?? The webmaster of this site had no record of my registration details?
Finally I had a phone call from a company called NERD-I.com
offering to solve various computor problems at a fee. I did not take up their offer, but hope they do not have anything to do with my current problems??
Many thanks

Hi Corel
Thank you for your reply
However I need the lower case version for some sites and the upper case version for the site in question? To make matters worse this site does not allow you to change your log on name unless it is in the form of an e-mail address
So what I need is Kostas for this site and kostas saved for other sites and allow me to choose which one I want to use
How do I do this please
I have no bother with this on Win Internet Explorer but I like Firefox
Mind it may be as simple as deleting The appropriate entry and resetting with Kostas instead of kostas?
But I would appreciate knowing the correct solution from an expert

In R12 how to change concurrent output/log file name prefix?

how to change concurrent output/log file name prefix?

but i want to change change concurrent output/log file name prefix?You cannot, and I believe it is not supported for all concurrent requests -- Please log a SR to confirm this with Oracle support.
Thanks,
Hussein

How do I change log on name ?

Recently purchased my first Apple computer, an iMac.Yeah ... I know, I am new to Apple products and when I exectued the initial setup I created the log on screen name and now I would like to modify the log on name. How do I do this?
Many thanks in advance!
D

Hello & a warm welcoe!
Not easy, & even can be dangerous to change it.
http://support.apple.com/kb/HT1428

Variant change history log in T-code KE28 .

Hi,
Variant change history log needs to be found for the Variant XYZ used in T-code KE28 .If any body know the procedure could you please reply .
Regards
Srihari

hi mythily,
you mean to say that, the user has manually inputed a billing date (rather than the one captured automatically) and created this cancelled invoice..?
Or the user has changed the billing date after this cancelled invoice was created..?
If its the first case, i dont think there is any log created for this.
Regards
Jobi

BP name change history

Hi,
which table the BP name change get stored? I want to see the previous name and updated name
I know we can see in Extras->Change History.
Really appreciate your help
Thanks
Rakesh

Hi
Which version are you using? For 6.0 and above - use the Function Module CRM_BUPA_IL_READ_CHANGEDOCS
For 5.0 : Use Program BUSCHDOC
Thanks
Surya

How to Recover Deleted Call History/Log on iPhone 5C?

I have an iPhone 5C, I have been deleted my iPhone 5C Call history by mistake recenty, now I want to restore my deleted Call history from my iPhone 5C on my Mac computer, can you give me some advise about how to recover my deleted call history from my iPhone 5C?

Call history and msgs is an important part of your daily mobile use. All types of call details can be checked through this option. But, sometimes call history/msgs can be lost from your phone due to some reasons and this can be a big problem for you. But, you can get back all of your call details if you have any previous backup file.
But, if you don't have any backup or you have never connected your phone to your PC, then how can you recover this? Then, the best solution is to use the iPhone data recovery program by which you can recover and restore all of your lost files easily on your PC. It scans your phone and recover your call history and the other lost files easily. It is really very simple and fast.
So, try iStonsoft iPhone data recovery to recover call history/logs from iPhone 4/4s/5 .

HT204380 How I can got the Facetime Calling History Log ?

How I can got the Facetime Calling History Log ? and the imessage log.

Malinaclt wrote:
Do you know where is FaceTime call history on iOS 8?
I updated from iOS 7, and now it shows only the contacts and under contact it's only the time of the last call that was with that particular contact.
Tap on the "i" at the right of the contact. You'll see the other calls that are grouped in that entry.

Can I delete individual caller names from my call history?

Is it possible to delete individual caller names on my call history? Ive been trying but everytime I highlite the name to delete, it ends up calling the number. IS this an avaialble feature? Thihs is pretty elementary but I hope somebody can help me.

Oh good theres other people who have had the problem as me I either just rename the contact or just say the iPhone crashed and had to restore it and hence the list is empty

History of name change

i really need some help.. is there any way possible to see my name change history? like when i change my name to what.

Hi ,
I know this table. I need change history table. Suppose we make any changes in WBS master data using CJ12 tcode, these chage history like old value and new value stored in some table.
Thanks
Sudarsana Reddy

Shell Script to grep Job File name and Log File name from crontab -l

Hello,
I am new to shell scripting. I need to write a shell script where i can grep the name of file ie. .sh file and log file from crontab -l.
#51 18 * * * /home/oracle/refresh/refresh_ug634.sh > /home/oracle/refresh/refresh_ug634.sh.log 2>&1
#40 17 * * * /home/oracle/refresh/refresh_ux634.sh > /home/oracle/refresh/refresh_ux634.sh.log 2>&1
In crontab -l, there are many jobs, i need to grep job name like 'refresh_ug634.sh' and corresponding log name like 'refresh_ug634.sh.log '.
I am thinking of making a universal script that can grep job name, log name and hostname for one server.
Then, suppose i modify the refresh_ug634.sh script and call that universal script and echo those values when the script gets executed.
Please can anyone help.
All i need to do is have footer in all the scripts running in crontab in one server.
job file name
log file name
hostname
Please suggest if any better solution. Thanks.

957704 wrote:
I need help how to grep that information from crontab -l
Please can you provide some insight how to grep that shell script name from list of crontab -l jobs
crontab -l > cron.log -- exporting the contents to a file
cat cron.log|grep something -- need some commands to grep that infoYou are missing the point. This forum is for discussion of SQL and PL/SQL questions. What does your question have to do with SQL or PL/SQL.
It's like you just walked into a hardware store and asked where they keep the fresh produce.
I will point out one thing about your question. You are assuming every entry in the crontab has exactly the same format. consider this crontab:
#=========================================================================
# NOTE: If this is on a clustered environment, all changes to this crontab
#         must be replicated on all other nodes of the cluster!
# minute        (0 thru 59)
# hour          (0 thru 23)
# day-of-month (1 thru 31)
# month         (1 thru 12)
# weekday       (0 thru 6, sunday thru saturday)
# command
#=========================================================================
00 01 1-2 * 1,3,5,7 /u01/scripts/myscript01 5 orcl dev
00 04 * * * /u01/scripts/myscript02 hr 365 >/u01/logs/myscript2.lis
00 6 * * * /u01/scripts/myscript03 >/u01/logs/myscript3.lisThe variations are endless.
When you get to an appropriate forum (this on is not it) it will be helpful to explain your business requirement, not just your proposed technical solution.

Different log file name in the Control file of SQL Loader

Dear all,
I get every day 3 log files with ftp from a Solaris Server to a Windows 2000 Server machine. In this Windows machine, we have an Oracle Database 9.2. These log files are in the following format: in<date>.log i.e. in20070429.log.
I would like to load this log file's data to an Oracle table every day and I would like to use SQL Loader for this job.
The problem is that the log file name is different every day.
How can I give this variable log file name in the Control file, which is used for the SQL Loader?
file.ctl
LOAD DATA
INFILE 'D:\gbal\in<date>.log'
APPEND INTO TABLE CHAT_SL
FIELDS TERMINATED BY WHITESPACE
TRAILING NULLCOLS
(SL1 DATE "Mon DD, YYYY HH:MI:SS FF3AM",
SL2 char,
SL3 DATE "Mon DD, YYYY HH:MI:SS FF3AM",
SL4 char,
SL5 char,
SL6 char,
SL7 char,
SL8 char,
SL9 char,
SL10 char,
SL11 char,
SL12 char,
SL13 char,
SL14 char,
SL15 char)
Do you have any better idea about this issue?
I thought of renaming the log file to an instant name, such as in.log, but how can I distinguish the desired log file, from the other two?
Thank you very much in advance.
Giorgos Baliotis

I don't have a direct solution for your problem.
However if you invoke the SQL loader from an Oracle stored procedure, it is possible to dynamically set control\log file.
# Grant previleges to the user to execute command prompt statements
BEGIN
dbms_java.grant_permission('bc4186ol','java.io.FilePermission','C:\windows\system32\cmd.exe','execute');
END;
* Procedure to execute Operating system commands using PL\SQL(Oracle script making use of Java packages
CREATE OR REPLACE AND COMPILE JAVA SOURCE NAMED "Host" AS
import java.io.*;
public class Host {
public static void executeCommand(String command) {
try {
String[] finalCommand;
finalCommand = new String[4];
finalCommand[0] = "C:\\windows\\system32\\cmd.exe";
finalCommand[1] = "/y";
finalCommand[2] = "/c";
finalCommand[3] = command;
final Process pr = Runtime.getRuntime().exec(finalCommand);
new Thread(new Runnable() {
public void run() {
try {
BufferedReader br_in = new BufferedReader(new InputStreamReader(pr.getInputStream()));
String buff = null;
while ((buff = br_in.readLine()) != null) {
System.out.println("Process out :" + buff);
try {Thread.sleep(100); } catch(Exception e) {}
catch (IOException ioe) {
System.out.println("Exception caught printing process output.");
ioe.printStackTrace();
}).start();
new Thread(new Runnable() {
public void run() {
try {
BufferedReader br_err = new BufferedReader(new InputStreamReader(pr.getErrorStream()));
String buff = null;
while ((buff = br_err.readLine()) != null) {
System.out.println("Process err :" + buff);
try {Thread.sleep(100); } catch(Exception e) {}
catch (IOException ioe) {
System.out.println("Exception caught printing process error.");
ioe.printStackTrace();
}).start();
catch (Exception ex) {
System.out.println(ex.getLocalizedMessage());
public static boolean isWindows() {
if (System.getProperty("os.name").toLowerCase().indexOf("windows") != -1)
return true;
else
return false;
* Oracle wrapper to call the above procedure
CREATE OR REPLACE PROCEDURE Host_Command (p_command IN VARCHAR2)
AS LANGUAGE JAVA
NAME 'Host.executeCommand (java.lang.String)';
* Now invoke the procedure with an operating system command(Execyte SQL-loader)
* The execution of script would ensure the Prod mapping data file is loaded to PROD_5005_710_MAP table
* Change the control\log\discard\bad files as apropriate
BEGIN
Host_Command (p_command => 'sqlldr system/tiburon@orcl control=C:\anupama\emp_join'||1||'.ctl log=C:\anupama\ond_lists.log');
END;Does that help you?
Regards,
Bhagat

Activation of History Log for Material Classification CLASS TYPE 001

Hi All.
I've a question about this object.
We need to launch RCCLUKA2 to activate multiple objects registration and to generate history log for changes in classification of materials (AUSP table).
Reference are sap notes 942691 and 943559.
I FOUND OUT THERE'S a big problem. RCCLUKA2 change AUSP objek key, using internal number range from INOB objects.
There're hundreds of custom reports and other stuff that read AUSP directly with Matnr Code as objek key.
I think that's a serious problem, isn't it? Or is there any solution about ?
Thanks for Help!
_______> old message
This report RCCLUKA2 does 5 steps.
1 step: activation flag for multiple objects in table TCLA and TCLAO only for input class type (in this case 001 -> MATERIAL);
2 step: download of KSSK data and AUSP data in two text files (name defined in input parameters);
3 step: delete all KSSK data and AUSP data for class type 001, 10.000 records every loop;
4 step: create reference object in table INOB for all records inserted in KSSKFILE, inserting all records in KSSK table at END of INOB upgrade;
5 step: inserting record in AUSP table from all records inserted in AUSPFILE, using INOB objectid created in step 4.
DEQUEUE ALL
We think that this process is a little bit dangerous in production system, due to procedures that always run, in background or foreground.
I've found a work around that creates an implicit enhancement for LCLVFF10 form FILL_REDUN.
I think that it's not suggested to create this enhancement because of the missing flags in TCLA/TCLAO and missing reference in INOB and KSSK database.
This enhancement would create records only in CDHDR and CDPOS with a general key object reference (such concatanate matnr(without-letters) mafid and atinn code).
This enhancement couldn't also activate the standard function of reading document changes from standard menu in MM03/MM02/MM01, etc..
Do you have any suggestion about this?
RCCLUKA2 is a very old report. SAP didn't give any advice or upgrades for this need?
Thanks for your help
Message was edited by: Roberto Vacca

Dear ,
changes in values for a characteristic can be monitored in CL20N but as for MM02/MM03 transaction only for class type 023.
For class type 001 or 300 the change document isnu2019t available.
Thanks.

C2-01 Call log & Call cost feature is missing...

Recently i updated nokia c2-01 with new firmware version 11.10, no problem occur..
but in dial call log there is no call summary feature in NOKIA C2-01, there is only latest call duration option, but no call history option, and no call cost feature & call management as compared to other nokia phone, just like NOKIA 1209...
one problem is also occur , when i play any music from media player, during play i open any msg or apply any new theme my phone is restart...
If I have helped you, please hit the star at the bottom of my posts - it's appreciated!
Don't forget if your problem is solved to press the "Accept as Solution" button.

There is a long thread on this at another forum..
http://www.dslreports.com/forum/r23501543-IMG-Caller-ID-on-in-New-York
It is normal for the box to start showing the option before it's actually live.
You won't need any service call or change of equipment. it will just start working when it's live.
From that thread some areas of NY have it. Verizon doesn't announce schedules on anything too much so you are highly unlikely to get an answer to "when".

Does SDDM have Journaling/History/Logging functionality?

Does Data Modeler have some kind of Journaling/History/Logging functionality that will generate DDL for journaling/history/logging tables and triggers?
Regards,
Marc de Oliveira

I assume you are looking for something like the Journal flag in Designer that generated all sorts of cool code? I have not found anything like that but I think you might be able to use the transformation script functionality to autogenerate some of it. The table template transformation works great for adding the standard audit columns to all the tables in a design, so I am sure you could write a "transformation" script that would clone the tables, change the name i.e., add _jn), add the journaling columns then add the triggers to do the population.

History log calls, name changed

Similar Messages

Maybe you are looking for