History log with LOGOUT date

I need to get a table with login and logout date/time.
In USR02 I find only the last login date/time.
It seem that by the FM "sapwl_statrec_read_file" (from transaction STAT) I can inferred all the logins where I have TCOD empty and CUA_PROG = SAPMSSY0 / SAPMSYST (is it correct?).
But I can't find traces about LOGOUT ...
Have you any ideas?
Thanks for the help

Interesting question.. even though it was posted long back.
I don't think there is any log stored for logoffs
But debugging SAP shows that the function module SPH_R3_LOGOFF is called.
If you are on ECC6 or a similar level server, you can create an enhancement in the function module and make an entry into some Z table.

Similar Messages

  • A More Advanced History Log with Smart Timer

    In the way that I use photoshop, I heavily depend on the History Log. I would like to have the option to preserve the data in the History Window instead of having to cut and paste the various 'History States' and then save them as different layers. In addition, I would like the option to be able to see the exact timing of each action performed in the history window.
    I would like to know how much time I am spending on each open window in Photoshop, Lightroom or other Adobe Product. A Smart Timer built into the history log would be perfect for this.
    A Simple tool that generates an Embedded Log of the date, the exact start and end time, a log entry showing when that photoshop window was on top of the screen with mouse or graphic tablet activity, and an exact minute count of how long that photoshop window was worked on (minus the bathroom breaks or moments of inactivity).
    I can't tell you how much I would love to be able to open up a Photoshop Document that I previously worked on and have the History Log in the History Window still preserved.... no matter how large of a file is saved. With the embedded Smart Timer, It would be great to be able to show my clients the exact time that was worked on their projects. It would also be nice to check up on students, employeess or co-workers progress.
    Thank You

    there is it is called "name"
    here is an example of how to find all faces that are not named currently
    make a smart albumn
    choose "Name" in first field
    Then "contains"
    The leave it blank
    anywhere that it finds a name that is empty it sorts it to the smart folder and you then can go thru them that way
    Please note that some photos have more than one face and even if one face is named and the others are not it still finds it and sorts it to the smart album

  • History logging with Citrix access

    Hello Everyone!
    I'm accessing SAP via Citrix plug-in, the problem is, when I login to SAP with citrix, the system does not remember the history of previous logging.
    For example, for every logging session I have to enable quick cut & paste, also when I press space bar, system does not show previously entered values.
    I have checked IE browser settings on history deletion but it is not enabled to delete history on exit.
    I further checked the SAP options settings Local data>>Histoty>>History Status>>On, even then on next logging there will not be any history when I press space bar.
    Please suggest/guide on how to enable system to remember previously logged data.
    Thanks.

    Hello Shaiz,
    Internet Explorer has no involvement in the SAP History files.
    The "Backspace" key is the default key for history entries, so please test with this too.
    Make sure that the profile for the user in Citrix is Read/Write. not read-only.
    Jude

  • Unable to take online backup including logs with HP Data Protector - DB2 9.7 fixpack 8

    Dear All,
    Infrastructure : -
    Database - IBM DB2 LUW 9.7 fixpack 8
    OS - HP-UX 11.31
    Backup solution - Data protector v7
    OEM of tape library i.e. HP asked me to make changes in DB parameters with values as
    --> LOGRETAIN to RECOVERY
    --> USEREXIT to ON
    --> LOGARCHMETH1 to USEREXIT
    These parameters are used for activating online backup of Database (DB2 LUW 9.7 fixpack 8).
    when backup is initiated from DP, backup happen successfully with option of excluding archive logs where as when we execute backup from DP(Data protector) with option including archive logs. Backup terminates with error.
    SQL2428N The BACKUP did not complete because one or more of the requested log files could not be retrieved
    Dear all need your expect help.
    Thanks in advance.
    Neeraj

    Hi Deepak,
    Thanks for your quicky reply and i have check the directory log_dir and log_archive are having enough space available.
    Please find the db2diag.log file.
           Database Configuration for Database
    Database configuration release level                    = 0x0d00
    Database release level                                  = 0x0d00
    Database territory                                      = en_US
    Database code page                                      = 1208
    Database code set                                       = UTF-8
    Database country/region code                            = 1
    Database collating sequence                             = IDENTITY_16BIT
    Alternate collating sequence              (ALT_COLLATE) =
    Number compatibility                                    = OFF
    Varchar2 compatibility                                  = OFF
    Date compatibility                                      = OFF
    Database page size                                      = 16384
    Dynamic SQL Query management           (DYN_QUERY_MGMT) = DISABLE
    Statement concentrator                      (STMT_CONC) = OFF
    Discovery support for this database       (DISCOVER_DB) = ENABLE
    Restrict access                                         = NO
    Default query optimization class         (DFT_QUERYOPT) = 5
    Degree of parallelism                      (DFT_DEGREE) = 1
    Continue upon arithmetic exceptions   (DFT_SQLMATHWARN) = NO
    Default refresh age                   (DFT_REFRESH_AGE) = 0
    Default maintained table types for opt (DFT_MTTB_TYPES) = SYSTEM
    Number of frequent values retained     (NUM_FREQVALUES) = 10
    Number of quantiles retained            (NUM_QUANTILES) = 20
    Decimal floating point rounding mode  (DECFLT_ROUNDING) = ROUND_HALF_EVEN
    Backup pending                                          = NO
    All committed transactions have been written to disk    = NO
    Rollforward pending                                     = NO
    Restore pending                                         = NO
    Multi-page file allocation enabled                      = YES
    Log retain for recovery status                          = RECOVERY
    User exit for logging status                            = YES
    Self tuning memory                    (SELF_TUNING_MEM) = ON
    Size of database shared memory (4KB)  (DATABASE_MEMORY) = AUTOMATIC(3455670)
    Database memory threshold               (DB_MEM_THRESH) = 10
    Max storage for lock list (4KB)              (LOCKLIST) = AUTOMATIC(20000)
    Percent. of lock lists per application       (MAXLOCKS) = AUTOMATIC(90)
    Package cache size (4KB)                   (PCKCACHESZ) = AUTOMATIC(161633)
    Sort heap thres for shared sorts (4KB) (SHEAPTHRES_SHR) = AUTOMATIC(480362)
    Sort list heap (4KB)                         (SORTHEAP) = AUTOMATIC(50000)
    Database heap (4KB)                            (DBHEAP) = AUTOMATIC(3102)
    Catalog cache size (4KB)              (CATALOGCACHE_SZ) = 2560
    Log buffer size (4KB)                        (LOGBUFSZ) = 1024
    Utilities heap size (4KB)                (UTIL_HEAP_SZ) = 10000
    Buffer pool size (pages)                     (BUFFPAGE) = 10000
    SQL statement heap (4KB)                     (STMTHEAP) = AUTOMATIC(8192)
    Default application heap (4KB)             (APPLHEAPSZ) = AUTOMATIC(256)
    Application Memory Size (4KB)             (APPL_MEMORY) = AUTOMATIC(40000)
    Statistics heap size (4KB)               (STAT_HEAP_SZ) = AUTOMATIC(4384)
    Interval for checking deadlock (ms)         (DLCHKTIME) = 10000
    Lock timeout (sec)                        (LOCKTIMEOUT) = 3600
    Changed pages threshold                (CHNGPGS_THRESH) = 20
    Number of asynchronous page cleaners   (NUM_IOCLEANERS) = AUTOMATIC(2)
    Number of I/O servers                   (NUM_IOSERVERS) = AUTOMATIC(5)
    Index sort flag                             (INDEXSORT) = YES
    Sequential detect flag                      (SEQDETECT) = YES
    Default prefetch size (pages)         (DFT_PREFETCH_SZ) = AUTOMATIC
    Track modified pages                         (TRACKMOD) = YES
    Default number of containers                            = 1
    Default tablespace extentsize (pages)   (DFT_EXTENT_SZ) = 2
    Max number of active applications            (MAXAPPLS) = AUTOMATIC(125)
    Average number of active applications       (AVG_APPLS) = AUTOMATIC(3)
    Max DB files open per application            (MAXFILOP) = 61440
    Log file size (4KB)                         (LOGFILSIZ) = 16380
    Number of primary log files                (LOGPRIMARY) = 60
    Number of secondary log files               (LOGSECOND) = 0
    Changed path to log files                  (NEWLOGPATH) =
    Path to log files                                       = /db2/ECP/log_dir/NODE                                                                                        0000/
    Overflow log path                     (OVERFLOWLOGPATH) =
    Mirror log path                         (MIRRORLOGPATH) =
    First active log file                                   = S0000187.LOG
    Block log on disk full                (BLK_LOG_DSK_FUL) = YES
    Block non logged operations            (BLOCKNONLOGGED) = NO
    Percent max primary log space by transaction  (MAX_LOG) = 0
    Num. of active log files for 1 active UOW(NUM_LOG_SPAN) = 0
    Group commit count                          (MINCOMMIT) = 1
    Percent log file reclaimed before soft chckpt (SOFTMAX) = 300
    Log retain for recovery enabled             (LOGRETAIN) = RECOVERY
    User exit for logging enabled                (USEREXIT) = ON
    HADR database role                                      = STANDARD
    HADR local host name                  (HADR_LOCAL_HOST) =
    HADR local service name                (HADR_LOCAL_SVC) =
    HADR remote host name                (HADR_REMOTE_HOST) =
    HADR remote service name              (HADR_REMOTE_SVC) =
    HADR instance name of remote server  (HADR_REMOTE_INST) =
    HADR timeout value                       (HADR_TIMEOUT) = 120
    HADR log write synchronization mode     (HADR_SYNCMODE) = NEARSYNC
    HADR peer window duration (seconds)  (HADR_PEER_WINDOW) = 0
    First log archive method                 (LOGARCHMETH1) = USEREXIT
    Options for logarchmeth1                  (LOGARCHOPT1) =
    Second log archive method                (LOGARCHMETH2) = OFF
    Options for logarchmeth2                  (LOGARCHOPT2) =
    Failover log archive path                (FAILARCHPATH) =
    Number of log archive retries on error   (NUMARCHRETRY) = 5
    Log archive retry Delay (secs)         (ARCHRETRYDELAY) = 20
    Vendor options                              (VENDOROPT) =
    Auto restart enabled                      (AUTORESTART) = ON
    Index re-creation time and redo index build  (INDEXREC) = SYSTEM (RESTART)
    Log pages during index build            (LOGINDEXBUILD) = OFF
    Default number of loadrec sessions    (DFT_LOADREC_SES) = 1
    Number of database backups to retain   (NUM_DB_BACKUPS) = 12
    Recovery history retention (days)     (REC_HIS_RETENTN) = 60
    Auto deletion of recovery objects    (AUTO_DEL_REC_OBJ) = OFF
    TSM management class                    (TSM_MGMTCLASS) =
    TSM node name                            (TSM_NODENAME) =
    TSM owner                                   (TSM_OWNER) =
    TSM password                             (TSM_PASSWORD) =
    Automatic maintenance                      (AUTO_MAINT) = ON
       Automatic database backup            (AUTO_DB_BACKUP) = OFF
       Automatic table maintenance          (AUTO_TBL_MAINT) = ON
         Automatic runstats                  (AUTO_RUNSTATS) = ON
           Automatic statement statistics  (AUTO_STMT_STATS) = ON
         Automatic statistics profiling    (AUTO_STATS_PROF) = ON
           Automatic profile updates         (AUTO_PROF_UPD) = ON
         Automatic reorganization               (AUTO_REORG) = ON
    Auto-Revalidation                          (AUTO_REVAL) = DEFERRED
    Currently Committed                        (CUR_COMMIT) = DISABLED
    CHAR output with DECIMAL input        (DEC_TO_CHAR_FMT) = NEW
    Enable XML Character operations        (ENABLE_XMLCHAR) = YES
    WLM Collection Interval (minutes)     (WLM_COLLECT_INT) = 0
    Monitor Collect Settings
    Request metrics                       (MON_REQ_METRICS) = BASE
    Activity metrics                      (MON_ACT_METRICS) = BASE
    Object metrics                        (MON_OBJ_METRICS) = BASE
    Unit of work events                      (MON_UOW_DATA) = NONE
    Lock timeout events                   (MON_LOCKTIMEOUT) = WITHOUT_HIST
    Deadlock events                          (MON_DEADLOCK) = WITHOUT_HIST
    Lock wait events                         (MON_LOCKWAIT) = NONE
    Lock wait event threshold               (MON_LW_THRESH) = 5000000
    Number of package list entries         (MON_PKGLIST_SZ) = 32
    Lock event notification level         (MON_LCK_MSG_LVL) = 1
    SMTP Server                               (SMTP_SERVER) =
    SQL conditional compilation flags         (SQL_CCFLAGS) =
    Section actuals setting               (SECTION_ACTUALS) = NONE
    Connect procedure                        (CONNECT_PROC) =
    Regards
    Neeraj

  • Multi-task data logging with DAQmx

    I was wonder is it possible to use 'DAQmx Configure Logging' VI and 'DAQmx Start New File' VI for multiple tasks?  I'm doing synchronized high speed DAQ with NI PXI-6133 cards.  Each card (there are 16) must have its own task.  Although the DAQ is continuous, the user (software trigger) determines when data is saved to the disk and for how long.
    In my scenario the test length could be up to an hour with various test events scatter throughout.  The users want to display the data during the entire test length.  However they only want to write the data to disk during an event.  The event could last from 10 sec to 1 min.  That is why the users want to control when data is written to the disk.
    DAQmx Logging seems to work for a single task only, but I need to do multiple tasks.

    I've attempted to implement your suggestion, but I still do not acquire data for all channels for all tasks.  I've enclosed my VI.
    Attachments:
    TDMS Logging with Pause LoggingFSPR.vi ‏55 KB

  • If someone is checking the yahoo mail from my computer, their ID appears if the first letter of my ID is the same with theirs. How can I delete their history logging on my computer?

    If someone is checking the yahoo mail from my computer, their ID appears if the first letter of my ID is the same with theirs. How can I delete their history logging on my computer?

    thank you, Matt :)
    you really helped me!

  • Pulsewidth data logging with counter channel

    Hello everyone.
    i have query with data logging of pulse duration measured with counter input into .lvm file
    pulse signal contain frequency of 100 hz with pulse duration vary from 2 to 8 ms
     i want to log pulse duration in .lvm file.
    when running vi(below screen shot) i find data logg with duplicate instance of time.
    i want to log pulse duration data with every ridging or falling edge of pulse.
    so if i run vi for 20 sec i sould have 2000 reading of pulse duration in my.lvm file with appropriate time  in time column
    Attachments:
    pulsewidth using counter.jpg ‏659 KB

    Hello Karthik,
    I can think of two ways I would approach this. One would use software timing, and the other would use hardware timing.
    1. Software timing: This might be the easiest approach. The idea is you would use your example much as it is written, then use a loop with a delay as the "Time between samples" to call your counting code over and over. In this case, I have a few suggestions for your code. First, instead of the loop, you could start the counter, use a delay in a sequence structure (use "Wait (ms)", not "Wait Until Next ms Multiple")for your "Sampling time", then read the counter and stop. After the stop you'll need another "Wait (ms)" in a sequence structure for your "Time between samples". Finally, wrap a loop around all of this to r
    epeat it. One advantage of this approach is the user can change the between time on the fly.
    2. Hardware timing: The idea behind this would be to use two counters. The first would count, the output of the second would be wired to the gate of the first to control when the first counts. The second counter would be programmed to output a pulse train where the positive portion of the pulse would be your "Sampling time" and the negative portion would be your "Time between samples". The creative part for this approach would be figuring out when to read the count. One way to do this would be to also connect the gate of the second counter to an analog input, then read the count whenever the input goes low (say, below 1 volt). This approach might be the more accurate of the two. However, you would always be getting a total count, so you would have to subract the previous count each time. Also, you would not be able to change your sampling time or between time once you start.
    Finally
    I'd suggest looking at some examples - you can usually find code to help you.
    Best Regards,
    Doug Norman

  • Accounting Log filling up with useless data

    I am getting my ACS Accounting logs filled with useless data from about 12 devices. I think I have found the cause - I just don't know how to fix it.
    The accounting data has a username we have not used for months, and I stumbled upon this by looking at various show commands on the devices that are causing the problem.
    When I do a "sh aaa sessions", I see this:
    CE-WIN-IDF16-3750-Stack1#sh aaa session
    Total sessions since last reload: 189
    Session Id: 1
       Unique Id: 127
       User Name: *not available*
       IP Address: 0.0.0.0
       Idle Time: 0
       CT Call Handle: 0
    Session Id: 354
       Unique Id: 263
       User Name: cenetmgmt
       IP Address: 10.62.7.15
       Idle Time: 0
       CT Call Handle: 0
    Session Id: 626
       Unique Id: 410
       User Name: leehoyle
       IP Address: 10.62.7.15
       Idle Time: 0
       CT Call Handle: 0
    I would LOVE to get rid of that Session ID: 354 if I could. I can't seem to find a suitable "clear" command. Any help out there?
    Thansk in advance!
    Lee Hoyle

    I am not trying to access anything I keep getting the message that my cloud is full than go to it to find that is is full of things from my computer and pictures from the Sims game spent 3 hours yesterday as it kept telling me that Verizon was not available. Why is my cloud not backing up my phone but randomly backing up my computer which I do not need. This is using the desktop Icon. I have not even opened it on my desktop until I tried to delete the stuff on it it did this on its own.

  • Activation of History Log for Material Classification CLASS TYPE 001

    Hi All.
    I've a question about this object.
    We need to launch RCCLUKA2 to activate multiple objects registration and to generate history log for changes in classification of materials (AUSP table).
    Reference are sap notes 942691 and 943559.
    I FOUND OUT THERE'S a big problem. RCCLUKA2 change AUSP objek key, using internal number range from INOB objects.
    There're hundreds of custom reports and other stuff that read AUSP directly with Matnr Code as objek key.
    I think that's a serious problem, isn't it? Or is there any solution about ?
    Thanks for Help!
    _______> old message
    This report RCCLUKA2 does 5 steps.
    1 step: activation flag for multiple objects in table TCLA and TCLAO only for  input class type (in this case 001 -> MATERIAL);
    2 step: download of KSSK data and AUSP data in two text files (name defined in input parameters);
    3 step: delete all KSSK data and AUSP data for class type 001,  10.000 records every loop;
    4 step: create reference object in table INOB for all records inserted in KSSKFILE, inserting all records in KSSK table at END of INOB upgrade;
    5 step: inserting record in AUSP table from all records inserted in AUSPFILE, using INOB objectid created in step 4.
    DEQUEUE ALL
    We think that this process is a little bit dangerous in production system, due to procedures that always run, in background or foreground.
    I've found a work around that creates an implicit enhancement for LCLVFF10 form FILL_REDUN.
    I think that it's not suggested to create this enhancement because of the missing flags in TCLA/TCLAO and missing reference in INOB and KSSK database.
    This enhancement would create records only in CDHDR and CDPOS with a general key object reference (such concatanate matnr(without-letters) mafid and atinn code).
    This enhancement couldn't also activate the standard function of reading document changes from standard menu in MM03/MM02/MM01, etc..
    Do you have any suggestion about this?
    RCCLUKA2 is a very old report. SAP didn't give any advice or upgrades for this need?
    Thanks for your help
    Message was edited by: Roberto Vacca

    Dear ,
    changes in values for a characteristic can be monitored in CL20N but as for MM02/MM03 transaction only for class type 023.
    For class type 001 or 300 the change document isnu2019t available.
    Thanks.

  • Login Date/time & Logout Date/time of User in apex

    Hi,
    Is there any apex internal table/view where I can get the Login Date/time & Logout Date/time per user ?
    Regards,
    Benz

    Benz wrote:
    Is there any apex internal table/view where I can get the Login Date/time & Logout Date/time per user ?No APEX version = no definitive answer...
    APEX 4.1 offers:
    <li><tt>APEX_WORKSPACE_ACTIVITY_LOG</tt>
    <li><tt>APEX_WORKSPACE_ACCESS_LOG</tt>
    Access these through Home > Application Builder > Application > Utilities > Application Express Views
    See: Creating Custom Activity Reports Using APEX_ACTIVITY_LOG
    Note that the underlying logs are purged on a regular basis, so for the long term you need to copy the data to your own tables.
    Home > Administration > Monitor Activity provides reports based on this data.
    APEX 3.0 has Home> Application Builder > Application > Application Reports > Activity > Page Views by Session which is probably closest to what you're looking for. Can't find this so far in APEX 4.x: presumably superseded by the Home > Administration > Monitor Activity > Page Views > By Interactive Report option?
    Note however that the concensus among the wise is that accurate "logout" statistics with APEX (or any browser-based system) is impossible. How many users actually logout using using a method that triggers a capturable event at the actual time they stop using the system? How many are going to close the current browser tab? Or the entire browser window? Or press Cmd-Q? Or click a bookmark for a different location? Or type "p0rn" into the Search box? Or switch to another window and spend the rest of the morning reading Twitter? Or shutdown the machine? Or run out of battery power? Or lose their wifi connection? Or get timed-out during the fire drill? Or go home for the night after locking their PC with everything still running? Or...

  • Firefox deleted ALL of my data (bookmarks,passwords,history, etc.) The data on my pc was also re-started somehow.

    After deleting three add-ons and refreshing firefox I realized that all my data (bookmarks,passwords,history, log-ins, everything) was deleted. I went to the help site and tried everything suggested. Nothing worked. The files that are supposed to have my old firefox data on my pc was also deleted. I'm at my wits end and at this point I'm getting tired of firefox.

    Well, it's pretty clear how we can make a backup with iTunes, but the backup is:
    1. closed and cryptic - no way to verify if it's valid or not
    2. must use iTunes to restore - if something bad happens with iTunes, the data is lost forever
    We need a way to ACCESS our personal data without using iTunes.
    As I said, iTunes is hideous, unintuitive and buggy.
    Unlike the iPhone, or any other Apple product, with iTunes It's not clear how to operate all the different menus and knobs and preferences. It is not clear what iTunes is actually doing behind all those menus and buttons and options.
    It's frustrating, and it is becoming a burden on the entire product.
    And the fact that I can't rescue my personal data from those iTunes backup files is annoying and bothering. I don't have the time to start hexediting those files, hoping for a miracle.
    Apple, I must say, with iTunes, you completely blew it.

  • Modification history of a plan data

    Hi Friends,
    I want show modification history of a plan data at BI planning folder level. For example, if a sales target is planned for a division for a particular time frame, i want to show when and from whom this sales target was actually entered and modification history data like whether this value was planned directly, or whether the value was formed from targets, any changes in & corrections.
    Already designed sales application planning folder and it is working fine. Now i have to incorporate this new functionality.
    Now i'm working on BI7 system, with transaction infocube.  Could any one of u help me with designing steps to proceed ahead. Or if you have useful pdf docs related to this send to [email protected]
    Appreicate your help with points.
    thanks,
    RP

    Hi Gupta,
    Thanks for info and assinged points...
    Yes i'm working on BI7, but we don't have web server associated with J2EE server,  so  accessing planning framework BPS0 only.
    For trial purpose,I created one dummy sales planning application by having planning cube without 0bpp_objuid,0uname,0date & 0time objects. Maintained data into planning cube(application) through a planning folder.  Then using remodeling concept i included 4 characterstics into planning cube and created required function modules. Now i'm trying to access planning area in bps0, it saying 'Generating enrironment"..in log bar. It seems to be we can achieve this only by again creating new planning objects(planning cube,area,levels,layouts & functions) only...
    Any suggestions...   
    thanks ,
    RP
    Edited by: Kumar RP on Mar 29, 2008 10:52 AM
    Edited by: Kumar RP on Mar 29, 2008 10:54 AM

  • SQL History log

    How do you sort the SQL History log entries in ASC or DSC timestamp order?
    I've tried clicking on the "Timestamp" column and it changes, but it seems to be a problem with handling dates with a 1 digit day along with a 2 digit day( probably same will happen with 1 and 2 digit months ), for example 4/7, 4/6, 4/5 come before 4/14, 4/13, 4/12.
    tia

    The SQL History sorts on the text value of the timestamp column, rather than the date value of the timestamp column and has been doing this as long as I have been using it. This issue has been posted several times (not recently from memory), but I don't know how high up the priorities it has ended up.

  • [svn:cairngorm3:] 14751: Bugfix for history management with navigation interceptors

    Revision: 14751
    Revision: 14751
    Author:   [email protected]
    Date:     2010-03-14 12:20:05 -0700 (Sun, 14 Mar 2010)
    Log Message:
    Bugfix for history management with navigation interceptors
    Modified Paths:
        cairngorm3/trunk/libraries/Integration/pom.xml
        cairngorm3/trunk/libraries/Navigation/src/com/adobe/cairngorm/navigation/core/NavigationM essageProcessor.as
        cairngorm3/trunk/libraries/NavigationTest/src/NavigatorSample1.mxml
        cairngorm3/trunk/libraries/NavigationTest/src/sample1/Sample1Context.mxml
        cairngorm3/trunk/libraries/NavigationTest/src/sample1/presentation/NavigationBar.mxml

    Alex,
    On the mac, I've been attempting to check out the Navigation project but I keep getting prompted for credentials.  This is using Subclipse within Flex Builder3 on the Mac.
    Jeff

  • History log

    I just created a lot of tifs.  I went to check on the history log and found there was none in the metadata area.
    Then I went to Edit/preferences/general and do not see the option here any more.
    CS4, windows Vista

    OK. That is an alternative way of viewing the history log when present. If there is history log there, it is also in the right metadata panel, and if not , then it is absent there also.
    I don't seem to be explaining the problem as it is not understood so I will try to clarify further.
    Here are the complete copied instructions for setting the history log in Bridge:
    Set Edit History Log options
    You may need to keep careful track of what’s been done to a file in Photoshop, either for your own records, client records, or legal purposes. The Edit History Log helps you keep a textual history of changes made to an image. You can view the Edit History Log metadata using Adobe Bridge or the File Info dialog box.
    You can choose to export the text to an external log file, or you can store the information in the metadata of edited files. Storing many editing operations as file metadata increases file size; such files may take longer than usual to open and save.
    If you need to prove that the log file hasn’t been tampered with, keep the edit log in the file’s metadata, and then use Adobe Acrobat to digitally sign the log file.
    By default, history log data about each session is saved as metadata embedded in the image file. You can specify where the history log data is saved and the level of detail contained in the history log.
    Choose Edit > Preferences > General (Windows) or Photoshop > Preferences > General (Mac OS). 
    Click the History Log preference to toggle from on to off or vice versa. 
    For the Save Log Items To option, choose one of the following: 
    Metadata 
    Saves the history log as metadata embedded in each file. 
    Text File 
    Exports the history log to a text file. You are prompted to name the text file and choose a location in which to store it. 
    Both 
    Stores metadata in the file and creates a text file. 
    Note: If you want to save the text file in a different location or save another text file, click the Choose button, specify where to save the text file, name the file if necessary, and click Save.
    From the Edit Log Items menu, choose one of the following options: 
    Sessions Only 
    Keeps a record of each time your start or quit Photoshop and each time you open and close files (each image’s filename is included). Does not include any information about edits made to the file. 
    Concise 
    Includes the text that appears in the History panel in addition to the Sessions information. 
    Detailed 
    Includes the text that appears in the Actions panel in addition to the Concise information. If you need a complete history of all changes made to files, choose Detailed."
    Once again, when I go to edit>preferences> general,  there is no History log preference to check.  there was in the past, and I have up till recently used it to keep the log, but it is absent now from this page.
    Going to the metadata in preferences it shows and is checked, but as it is not in the options, none of the choices listed above can be made.  It is gone from the general.

Maybe you are looking for

  • Can't update the software on my iPhone and iPod on iTunes

    I know I've seen other topics about this problem, but I can't figure out what's wrong or how to fix it. Every time I connect my iPhone or iPod iTunes asks me if I would like to download and install the new software available for my devices, but it wo

  • One-year free subscription to Adobe Creative Cloud Photography

    Hey! I want to buy a Canon Pixma Pro-1 printer and it says there that Adobe and Canon has an offer on a one-year free subscription to Adobe Creative Cloud Photography. My question is: I already have a subscription, how will I be able to use the offer

  • Why have my TV shows on my external hard drive disappeared when I've deleted them from my iTunes library?

    I am trying to free up space on my internal hard drive (MacBook Air).  I copied my iTunes TV shows onto an external hard drive, following all instructions carefully.  They were all there on the external drive - I opened a few and they played perfectl

  • Simple ccBPM question

    Hi! Now I have created a scenario Source_sys -> ccPBM -> Target_sys. But, what if you define condition based interface determination and receiver determination in the ccBPM? Is it necessary to have routed ccBPM -> Target_sys? Thanx, Peter

  • Can anyone help - battery trouble!

    Hey I was wondering if anyone can help me. My ipod is 2 years old now and even from the start the battery life has never been that good. having recently having to reset the whole thing i have had even more trouble with the batter life. I plug it into