History of activities by users on portal?

Hi,
How do we come to know about the activities performed by users on portal?
Like which users has assigned which ivew page. Assigned which role etc...
Regards,
Anagha

Hi,
Have you checked the portal activity report iview.
Using this iview you can display the number users logged on , most active users,  number users acesses a particular iview/page with in a specific period of time.
Check the below help link also
About portal activity report
http://help.sap.com/saphelp_nw04s/helpdata/en/58/728ea01cf64fff996b827f2a06f9b1/frameset.htm
For creating portal activity report iview
http://help.sap.com/saphelp_nw04s/helpdata/en/fb/144120ea5b4e9c9385d493a578d6c9/frameset.htm
Raghu

Similar Messages

  • How to set up reverse proxy to allow user access portal site from internet

    Hi all,
    I have installed 10g(10.1.2.0.2) AS on same machine(single IP for both mid and infra with different users respectively). there is a DMZ on which windows IIS is working through which we need to redirect the request to application server such that users access portal page from internet (within intranet all URLs are working fine). I have went through technet documentation where i found 3 ways : through this link
    http://download.oracle.com/docs/cd/B14099_19/core.1012/b13998/variants.htm
    Section 9.2.1.1, "Configuring OracleAS Web Cache as a Reverse Proxy"
    Section 9.2.1.2, "Configuring the Oracle HTTP Server as a Reverse Proxy"
    Section 9.2.1.3, "Configuring Internet Information Services as a Reverse Proxy"
    I am confused to which option to use. Also i went through the metalink document 270160.1
    Please help me which option to choose to do this.
    Thanks.

    Hi Hozy,
    May be it's too late, I am thinking to go in the same route for our sap portal access to external customers. Please can you share your experience , like what are the challenges have you faced? what is the complexity? what are all the resources we need to configure this?
    I appreciate your feedback.
    Thanks
    Krish

  • Portal runtime error while creating users in portal content administrator

    I am getting this error while creating new users in portal.
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_admin_ws/com.sap.portal.user_management/com.sap.portal.createNewUser/com.sap.portal.createNewUser
    Component Name : com.sap.portal.usermanagement.admin.CreateNewUser
    com/sap/security/core/util/imp/Util.patternMatch(Ljava/lang/String;Ljava/lang/String;Z)Z.
    Exception id: 03:51_27/08/08_0028_7431850
    See the details for the exception ID in the log file
    any help is appreciated...

    log file look something like
    this
    2,5,PRT-Async]##0#0#Error#1#/System/Server#Java###Exception in PortalRequestManager.dispatchRequest without timeout
    [EXCEPTION]
    #1#java.lang.NoSuchMethodError: com/sap/security/core/util/imp/Util.patternMatch(Ljava/lang/String;Ljava/lang/String;Z)Z
         at com.sap.security.core.admin.util.checkEmail(util.java:110)
         at com.sap.security.core.admin.UserBean.checkFieldValidity(UserBean.java:695)
         at com.sap.security.core.admin.UserBean.checkUser(UserBean.java:591)
         at com.sap.security.core.admin.UserAdminLogic.performUserModify(UserAdminLogic.java:3226)
         at com.sap.security.core.admin.UserAdminLogic.executeRequest(UserAdminLogic.java:552)
         at com.sapportals.portal.prt.component.usermanagement.admin.UserAdminComponent.doContent(UserAdminComponent.java:71)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:377)
         at java.security.AccessController.doPrivileged(AccessController.java:241)
         at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:390)
         at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164)
         at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
         at java.lang.Thread.run(Thread.java:758)
    #1.5#001125A6576A008C00000015000550E2000455943BAE9D63#1219995051656#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#Administrator#197794##irconepd_EPD_7431850#Administrator#f4d062d0759411ddb89b001125a6576a#Thread[PRT-Async 2,5,PRT-Async]##0#0#Error#1#/System/Server#Java###Exception ID:01:00_29/08/08_0043_7431850
    [EXCEPTION]
    #1#com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
    Component : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.user_administration/com.sap.portal.user_admin_ws/com.sap.portal.user_management/com.sap.portal.userSearch/com.sap.portal.userSearch
    Component class : com.sapportals.portal.prt.component.usermanagement.admin.UserAdminComponent
    User : Administrator
         at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:969)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
         at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
         at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:377)
         at java.security.AccessController.doPrivileged(AccessController.java:241)
         at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:390)
         at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164)
         at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
         at java.lang.Thread.run(Thread.java:758)
    Caused by: java.lang.NoSuchMethodError: com/sap/security/core/util/imp/Util.patternMatch(Ljava/lang/String;Ljava/lang/String;Z)Z
         at com.sap.security.core.admin.util.checkEmail(util.java:110)
         at com.sap.security.core.admin.UserBean.checkFieldValidity(UserBean.java:695)
         at com.sap.security.core.admin.UserBean.checkUser(UserBean.java:591)
         at com.sap.security.core.admin.UserAdminLogic.performUserModify(UserAdminLogic.java:3226)
         at com.sap.security.core.admin.UserAdminLogic.executeRequest(UserAdminLogic.java:552)
         at com.sapportals.portal.prt.component.usermanagement.admin.UserAdminComponent.doContent(UserAdminComponent.java:71)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
         at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
         at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
         ... 7 more

  • Get all users in Portal

    Hi all,
    I'd like to ask you for help with my Portal application.
    I need to retrieve all users in Portal.
    Now I'm using searchUsers method of UserFactory object. It returns to me all users, but it is very time-consuming operation for cca. 3500 users in result.
    There is another method how to get users
    UserFactory.getUniqueIDs()
    , but list of users is not complete (SIZE_LIMIT_EXCEEDED).
    Can anybody please advise me how to get all users in Portal (some standard way)? And faster?
    Many thanks for help,
    Pavel

    Hi,
    Refer to,
    How to retrieve all users in the portal with UME API
    May be helpful.
    Regards
    Srinivasan T

  • How can  I  restrain the user login portal once, in the same time ???

    Hi
    I need to restrain the user can't repeat to login portal ....
    to reduce portal loading
    How can I restrain the user login portal once, in the same time???
    Which attributs in Identity Manager or amconsole I can do it to restrain the user ??
    tks

    Does your portal support anonymous access? If so, make sure you are using the authlessanonymous mode. This mode only creates one session that is shared for all anonymous users. This is much more efficient than anonymous access, which creates a session for each anonymous user.
    I have no other recommendation for limiting users to a single login. In general, web applications do not behave like this. What if a user closes their browser without logging out? Does the user have to wait until the session times out in order to log back in again?
    The same thing is true for users that are mobile. If a user leaves their office without logging out and then attempts to log in with a laptop in the conference room, then access will be denied in your implementation. Users do not expect this type of limitation being built into the system.
    If you are having problems scaling, then you need to look at your architecture and perhaps add some more resources. Also, make sure you are making efficient use of the authlessanonymous access mode as stated above.
    - Jim

  • How to  restrain the user login portal once, in the same time??

    Hi
    I need to restrain the user can't repeat to login portal ....
    to reduce portal loading
    How can I restrain the user login portal once, in the same time???
    Which attributs in Identity Manager or amconsole I can do it to restrain the user ??
    tks

    Does your portal support anonymous access? If so, make sure you are using the authlessanonymous mode. This mode only creates one session that is shared for all anonymous users. This is much more efficient than anonymous access, which creates a session for each anonymous user.
    I have no other recommendation for limiting users to a single login. In general, web applications do not behave like this. What if a user closes their browser without logging out? Does the user have to wait until the session times out in order to log back in again?
    The same thing is true for users that are mobile. If a user leaves their office without logging out and then attempts to log in with a laptop in the conference room, then access will be denied in your implementation. Users do not expect this type of limitation being built into the system.
    If you are having problems scaling, then you need to look at your architecture and perhaps add some more resources. Also, make sure you are making efficient use of the authlessanonymous access mode as stated above.
    - Jim

  • Error While Creating user in Portal

    Hai Experts...
    Errored occured while creating User in portal.
    Error : Error  occured due to persistance: contact administrator.
    Since i have created user in J2EE_ADMIN which has Administrator Role. i am facing this issue.
    Kindly help me in this issue..
    Regards
    Arun Rajan,

    Hi ,
    Solved problem by changing the UME configuration as ABAP.
    after changing the UME configuration , some memory dump problem faced and solved as per server0 getting restarted when i access UME configuration .
    Now it is able to create user in portal.
    Thanks   Juan Reyes and  RishiAbrol.
    thanks to all helped me to sort out the issue.
    Regards
    Arun
    Edited by: Arun Rajan on Sep 11, 2009 8:43 AM
    Edited by: Arun Rajan on Sep 11, 2009 8:45 AM

  • ERROR WHILE IMPORTING USERS IN PORTAL

    Hi experts,
    I need to import users into portal but, while importing iam getting an error :Error:
    Failed while committing because of No data source feels responsible for principal. Please check the data source configuration
    plz help me in solving this.........
    waiting for u r responses......
    Regards,
    Shilpa
    Edited by: pasumarthi shilpa on Jun 13, 2008 8:21 AM

    Check the steps you followed once again.
    See this blog for step by step procedure
    Creating An Import File For UME From Excel
    Koti Reddy

  • Replication of Users from portal to R/3

    Hi,
    I would like to develop a portal functionnality that allows replication of users from portal to R/3. I know that the functionnality already exists in portal but we need to do another one because of special requirements. How could I find the java code of the existing functionnality to understand how SAP built it?
    Thanks

    Hi,
         You can check the following link
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/5b/5d2706ebc04e4d98036f2e1dcfd47d/frameset.htm">UME</a>
    It will give you an idea of UME Architecture.
    See if it helps you.

  • Manual bypass to view all history entries of all user for one report

    Test have been performed on standealone BIP 10.1.3.4.1 (Patch 11931697). May be it can be reproduced with previous versions and/or other J2EE container.
    Problem is now described in Oracle Support with bug ID : 12412334
    Bypass solution may be helpful for people who use work directly in BIP web interface or who integrate this web interface using HTTP URLs or HTTP/REST like custom app (and may be other cases...)
    When logged with an admin username, you can view OR filter "ALL" history of one all users for one report by typing an url like :
    http://BIP/xmlpserver/servlet/reporthistory?report_url=/REPORT_DIR_PATH/XDO_NAME/XDO_NAME.xdo&tfilter=all
    Where :
    BIP is BIP Server DNS
    REPORT_DIR_PATH is report directory path in BIP web interface
    XDO_NAME is report's name

    I don't think there is a way. There should be, but I've never seen it.

  • Abap+java abap-user and portal-role PROBLEM?? help

    We have the ABAP+java add-on install.
    The UME is by default ABAP engine.
    From Portal:
    1 I create a portal user, it ALWAYS creates ABAP user in ABAP engine.
    2. I create a portal role, it creates a role in the Portal.
    3. When I assign the user this portal role,
    having worksets and pages,
    I get no pages or worksets shown in the portal page as soon
    user logs in.
    Can you help configure this so that I could see the pages and iviews inside this workset when user logs in.
    Thanks  a lot.

    Hi Mike,
    You did right,
    Just check the Entry Point Property of your iView, page and workset to YES
    there are two radio buttons yes and no select the yes one,
    you can see your pages afte rlogin with the new user.
    Regards
    Abhimanyu L

  • Help required on Brodcast messages to logged on users in Portal- Weblogs

    Hi All
    The link to the weblog is
    Brodcast messages to logged on users in Portal(Part1)
    My doubts is
    1) Whenever user refreshes his/her page the popup gets displayed.
    User might get irritated everytime he will referesh the page.
    2) When does the data stored in container destroys?
    Please comment
    Points will be rewarded.
    Regards
    Sonal Mangla

    Hi Sonal,
    Did you find a solution yet ?
    I'm also interested.
    Regards,
    H. Cakir

  • Problem with creating new user in portal = portlet is not visible

    Hi,
    I've got a problem with creating new users in portal. In the Administer tab of the builder is the user portlet not visible.
    How can I make this portlet visible?
    Please Help
    thank you...
    Gilbert

    Hi..my problem slightly similar.
    I created one new user, and didn't select anything from "Public Groups Assignment" and "Privilege Assignment" for him.
    I expect the user will be a public user.
    But, when he try to logged in the portal,
    He cannot see all the PORTLETS related to database values..
    All he can see just LINKS -that all in my portal right now beside the report from database that the user cannot see :)
    So, what did i do wrong?
    Plz Advise, and thanks.

  • Regarding : How to add a user to portal group with the help of webdynpro .

    Hii ,
    I am working on an application in which with the help of an action( Button)  we r adding a user in Ztable in R/3 , as well as  group in portal.
    The user r successfully creating in Ztable but from portal side No user is assigned to Portal group.
    I need coding solution for " How to add a user to portal group with help of webdynpro"
    Any usefull link will also do.
    Pls anyone have any solution ??
    Thnks in advance.
    Rewards r waiting for u .

    Hi,
    Use UME api to add user to portal group.
    Using UME API:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40d562b7-1405-2a10-dfa3-b03148a9bd19
    Regards,
    Naga

  • Creating User in Portal and SAP Backend simultaneously?

    Is it possible when you create a new user for the portal (in my case, active Directory is used as central user storage) for SSO, that this user will also be created simultaneously in different SAP Backends without creating it manually everytime? Or is it perhaps possible to connect Active directory to these SAP backends as central user storage, too? My Problem is that everytime I must create manually the users in portal and all belonging SAP backends but I think it's not very comfortable.
    Regards,
    Frank

    Hi Frank,
    There are ways to integrate complete User Management where either SAP or the local LDAP (i.e. MS ADS) drive as the central store for users.  Ultimately, the CUA concept can be entirely driven by SAP including the MS ADS ID's for the network.  It involves a proposal that is uploaded into the ADS which includes the SAP required schema.  When populated (or if configured as such) they can be applied as user properties for the backend systems.  There is a tool within R/3 called LDAPSYNCH that allows the replication (either direction) of user data.
    This concept is referred to as Identity Management.  Start at http://service.sap.com/security.  Then go to "Security in Detail" ==> "Secure User Access" ==> "Identity Management".  There you can find info/docs on the CUA concept within the SAP landscape as well as the integration into the corporate LDAP.
    I have seen most customers use separate R/3 backend User Management from the ADS.  I assume that this is due to the complexity of adopting a whole new global user management process with existing "cultured" processes.  However the SAP systems can support the entire corporate user management driven from within the R/3 core (HR).
    I hope that this helps,
    Regards,
    Judson

Maybe you are looking for