History of services entry

Please share with us how to find History of Services entry which T code use please suggest.

Hi,
User t code for Service entry sheet history
1 , ML84
2, ME23N
3, ML81N
Tables
Table :
ML_ESLL
ESLL
Thanking you
Regards
mahesh

Similar Messages

VALUE IN PO HISTORY OF SERVICE ENTRY SHEET EXIST EVEN AFTER DELETION OF SES

Respected All,
My client has prepared a down payment request , prepared a service purchase order against that vendor, created service entry sheet.
Later on he came to know that the qty he has entered is wrong ,so he reversed all the goods receipt(done 102 Mvt) , deleted the service entry sheet and now trying to create new SES against the same line through ML81N.
But the Qty column after selection of services is coming blank, i have checked the po history, in that the GR Qty and value is zero and service Qty is zero but service value and down payment column still contains the value, though we have reversed the service entry seet.
please guide me what to do to reflect the qty part in ML81N again.
Thanks and Regards
Abhay Mahodaya

can you see the material document with reverse movement ( 102 ) ,corresponding to your cancelation of SE sheet in the P.O history tab?
also check whether the 'actual quantity' in the Service entry extreme right column shows zero.
check in the deleted SE sheet history tab 'change document' button whether the last row change mentioned is setting deletion indicator

Purchase order history for service entry sheet

Hello All,
I created 3 service entry sheets for service P.O. however I saved it with out accepting them. Why the Purchase order history is not updated after the service entry sheets were saved?
When I created another service entry sheet for the same P.O. and accepted the service entry sheet and then saved it, the purchase order history was updated along with the posting of latest service entry sheet and previous three service entry sheets are also visible.
Why this is happening? Please help.
With regards.
Sanjay

Dear Prashant,
Thanks for the response.
1) Whenever a SES is saved (without acceptance) an entry gets updated in PO history with out posting document number.
2)Material doc. entry gets updated in P.O. history table when SES is accepted and saved.
Sl. no. 1 is not happening when I create SES for the first time. Once 2nd SES is made and accepted and saved. After that all entries including the first one is shown in P.O. history table.
Thanks and regards.
Sanjay

Reports for service entry

Hi Experts,
Can anybody please tell me,
1.Report for Pending PO's those not created Service Entry Sheet.
2.Report those showing Cost Center and GL Ac with entire history for Service Entry Sheet.

Dear,
I give only one answer of your question.
Report for Pending PO's those not created Service Entry Sheet.
ME2N is display only those PO for which service entry sheet is not created.It not display service entry sheet number or any other detail.
Regards,
Mahesh Wagh

Service entry sheet Number shown in PO history but does not exist

Dear Experts,
we use ZML81N : for creation of SES
& use ML81N : For Acceptance ( Release ) of SES
while creating PO , under services tab for a line item , the service has been entered for total Quantity 12 & units as "months"
User tried to create one service entry sheet against the line item with Quantity = 1 & unit = month , but it seems this SES got saved somehow without any line items inside it .
if we we try to open this SES with number shown in PO history , system says SES "Does not Exist"
In the PO history against the PO item in Item Details-PO history tab , one Service entry sheet is showing with "SEnt" in the
short text , but there is no row in PO history for the above with short text as "GRSR" , which also should have been created
automatically by the system . In the column "Amount in LC" , amount for the service is showing .
When a new SES for the same line item is attempted to be created , the system is showing available balance Quantity as "11" ,
that means system is considering the "1" quantity entered in the first SES as consumed .
Please advise how we can delete the first SES which we are not able to see , free-up the budget consumed by this SES &
restore the Balance Quantity shown in the new SES as again "12" as if no SES has been done against the PO line item.
I have tried to search the forum , but could not find solution.
Your Response will be deeply appreciated.
Thanks in Advance .
Regards,
Anil Shanbhag

Dear Sir,
Thanks a lot for your reply.
After checking it is found that there is no data in the tables ESLL, ESLH, etc. stored for the mentioned entry sheet, so SAP can not try to reconstruct the entry sheet based on that data.
Can you please tell from which tables the wrong FI and CO postings (e.g., the referring accounts) must be cleared manually in order to solve the problem ? as we could not find the value of "LC amount mentioned against the Service entry sheet in PO history" in both the tables ESLL & ESLH.
warm Regards,
Anil Shanbhag

Purchase order and service entry sheet

Hi
Is there a way to prohibit modifications on the position of services purchase order when the service entry sheet and the invoice were already entered for that position?
Thanks in advance for your help
Tomas

hi, thanks for your help, but the problem that i have is when the service entry sheet and the invoice are allready entered, the user change the value of the position and the service tab, so the user can enter services for more amounts. So its produce difference on the purchase order history between the values of LERF (WE) and the value of the purchase position. For example
Service Purchase order for 100 dollars.
Tab service: 2 units for 50 dollars
The user enter one service entry sheet for 50 and the invoice for 50 (lerf and WE= 50)
Then the user change the position of the purchase order and increase the value to 100 and modifies the service tab to 1 services for 100.
Then he enter one service for 100 and the corresponding invoice..........so the result is the following:
Service purchase position: 100
LERF-WE: 150
so the purchase order history is inconsistence.
For that reason i whant to know is there is a wat to prohibit modifications on the position of purchase order
Thanks in advnace for your help
Enzo

Service entry sheet - Service PO Problem

gurus
I have a service PO which has "N" number of SES entries in PO history as well as same number of GR and also N number of IR entries..
Can somebody tell me how to consolidate against which SES (GR) which IR is posted?
Any table for PO history or any standard T-code to find the IR against a SES (GR),
thanks
SACHIN

Hi Sachin,
You have to follow below 3 Process for your requirement.
1) In Service Order -
> Item Details ---> Invoice Tab -
> Just Check the SERVICE BASED IV ( If you have checked in the Vendor Master, it will automatically Flow)
2) You post the Vendor Invoice in MIRO by choosing the referance Document as SERVICE ENTRY SHEET
3) While posting the invoice in the above process, you enter the Service Entry Sheet number in the referance Field along with the Vendor Inv. No.
If you follow the above process, then easily you can get the datas from EKBE table.
With Regards
Srinivasan Baskaran

Service entry without an entry date/not linked to goods receipt/invoice?

Dear Gurus,
I created a service entry against line 10 of PO. When viewing the service entryu2019s u201CAccept. Datau201D tab, there is a document date and a posting date.
When viewing the u201CHistory tab,u201D the created dated is 01/12/11...
When viewing the POu2019s u201CPurchase Order Historyu201D tab, the Service Entry does not have an entry date Additionally, when I go to the u201CGR/IR Assgtu201D view, the service entry is at the very top of the view But the goods receipt and invoice processing document are at the bottom, grouped together, but without the service entry.
Please help as why is it happeing like this?

Dear Gurus,
I m creating service PO and later on doing service entry sheet w.r.t the PO...in service entry sheet, i m entring entry date, posting date and all other relevant informations...and saving the SES and later on releasing it...
after this, I am going to PO history tab, there i m seeing the SES number but entry date field is missing...
May i know the reason?
Pls help...

Service entry sheet cannot revoke acceptance

Dear All,
Service PO is created with four line items in Service tab in item details.
All are entered as short text i.e without service master record.
Three Service entry sheets are created for the first three items. But only one material document (with mvmt type 101) has been created for those three service entry sheets.
This material document contains these 3 line items with 3 service entry sheets as reference document.
For fourth line item in services tab of PO, fourth service entry sheet + material doc (101) created.
Also in PO history tab of PO, Three GR line items for first material document and Fourth GR line item for second material document displayed.
In PO history, Only fourth service entry sheet is diplayed.
Now when we want to revoke acceptance of one of the three SES (with common mat doc), system is not allowing. Its giving error message SE025 as below
Not possible to cancel acceptance immediately due to aggregation
Message no. SE025
Diagnosis
It is not possible to revoke acceptance due to aggregation of the PO history records.
Procedure
To revoke (cancel) acceptance of one or more entry sheets, you must first disaggregate the PO history records (report RM06EKBE).
But when report RM06EKBE is run, its not getting executed.
Please suggest how to revoke acceptance of those three SESs.
Thanks & Regards

Hello,
From your description of the problem, I assume this is an inconsistency
problem. Hence, I would suggest you to carry out the 2 steps in solving
the problem.
STEP 1 : RESTORE THE SES IN THE EKBE
STEP 2 : REVOKE THE ACCEPTANCE.
Report ZMO_EKBEUPDATE is used to solve the STEP 1 and this report works
for the all SPs. The report is in the Note 527907.
First run the report in the simulation mode just to realise the missing
SES. After that the Report can be run without simulation mode.
This will do a database Update.
Once the DB Update is done and the SES is in EKBE the you can revoke the
SES.
ABOUT THE REPORT ZMO_EKBEUPDATE
The report in the Note 527907 is a very useful report.
It does 2 things,
1. Restores the Missing SES in the EKBE
2. Solves the inconsistency in the NETWR in ESSR and EKBE.
For us Point 1 is more important than 2.
It is the enhanced version of RMESSRK2 from note 442091.
This Report will solve the current problem and the note that you have
applied will prevent the future occurrence of the problem.
if you are still not able to solve this incoinsistency, I would suggest that you open a ticket at SAP.
Best Regards,
Arminda Jack

Service Entry Sheet Deletion

Hello Friends,
My client is facing a problem while creating a service entry sheet for a PO. In the PO history it is showing a service entry sheet(SES) is created for a line item. But that SES has been revoked and deleted also. But the concern is although the SES is deleted, total values (Amt in LC) is still showing in the PO history. The value is not being changing to zero in PO history.
When user is attempting to make another SES for that line item, as the PO is open now, an error messege displaying which says the entered quantity exceeds the PO quantity. Messege No - SE363.
When i am trying to do the same scenario in development, system is working fine, i am not getting that error. I am able to make futher Service Entry Sheet.
It will be great help if anyone can give me some feedback on this at the earliest.

Dear Frnd,..
This is a std system bug. Which is not reproducable.
Please use SAP note - 126285.
Whice will provide you with Report RMBESTK2.
with following coding. create a report with this coding and assign a T-Code to it. And use it when you face such an issue in future.
Amit P hiran
Njoy SAP...
Njjoy Lyf...
Edited by: Amit P Hiran on Jun 21, 2010 4:59 PM

User names of service entry sheet release strategy

Dear Expert ,
Kindly guide from which table could I get the user names values who done the release strategy for service entry sheet for example I have 3-release codes : 1. Creator
                        2. Verifier
                        3. Approver
So I need to know who has done these 3-actions for respective service entry .
Best Regards

Hi,
The information about the Person who has relesed the entry sheet will be not stored in the change document for the entry sheet.
There is only the information about which release code has released the SES. In an organization a certain user or a group of   users can use the very same release code.
However, if you have also configured a workflow with this release strategy, then it is possible to know who has
released the SES.
You will need to create you own report which reads the change history (CDHDR and CDPOS) and finds out the date when the last release code of the release strategy has been released and to find out based on this data who was the approver.
Regards,
Edit

Service entry sheet - GR quantity is more than confirmed quantity

We have a service based PO with Acct assignment F and Item category D.
We have ticked Goods receipt in delievery tab.
We have ticked 1) invoivce receipt and 2) GR-based IV. ( S-based IV is not ticked)
There is no purchase order history.
While making the service entry sheet and accpeting it , system is throwing an error log "GR quantity is more than confirmed quantity".
But we have not confirmed any quantity.
Please advise how to solve this error or what could be wrong in PO.
Thanks,
Manohar

Hi,
Go to ML81N, put the PO number and find out Is there any service entry sheet with No acceptance(Red Mark) is found there or not for that PO Line Item.
If yes, thenclick on that...go to change and delete that SES ......
Hope Clear U !
Regards,
Pardeep malik

Service entry sheet deleted at header need to be undeleted

Dear Friends,
Pls note my client hv budget allocations & thru this only the procurement activities are happening.
Now in one scenario they had deleted one service entry sheet from header instead deleting thru line items & trying to create new service entry sheet. But the system is now not accepting & giving error as "Budget Exceeded" . By deleting the service entry sheet from header doesn't get deleted totally from system.It still considers those figures at the time of making new service entry sheet & gives error message. Kindly advise how to delete this service entry sheet totally from system. Is their any program to run for this in system??

Hi
If u r creating SES, system will post one material document along with SES. If u revoked or cancel the SES, the system might hv issued a another material document in the amount u reversed.
Check it out both are existed in the PO history tab.
If yes, then clisk on the SES, it should be in no acceptance mode.
Then u can create new SES.
Check it out.
Regards,
Raman

ML81N Service entry sheet and material document

Hello,
Why SAP creates a material document "WE" and another document "Lerf" when you create a service entry sheet using the ML81N transaction?
I have seen too that if you don't set up the "No limit" flag in the purchase order then you can make a lot of entry sheet but SAP doesn't create the same number of material documents.
Therefore, it can be a scenario where you can have a document entry sheet but you don't have the corresponding material document.

Hi,
The GR document is an official document. The system creates the material document automatically when you accept and save the entry sheet (ESSR-KZABN = X).
"Lerf" in the PO history is a service entry sheet, the material document is the same material document which MIGO would create.
Please check the EKBE and MSEG for the entries.
You can save for the same PO several entry sheets and the system automatically creates material documents for these entry sheets when you save and accept the entry sheets. It is not possible to save more than 1 material document for the same entry sheet.
But it is possible to release entry sheets collectively in ML85:
For example you created a PO with service quantity 20 and you can create as many entry sheets as the quantity from the PO service item (20) and the overdelivery tolerance this allows. All of these entry sheets will refer to the same PO item. In ML85 you can release all of these entry sheets in the same step in ML85 and the system will create a material document (just 1 material document) with as many items (BUZEI) as many different entry sheets you saved for your PO item...
Regards,
Edit

POs without service entry-Report

Hai,
I have one requirements for service entry report.
my requirement is I need to take all POs without service entry.
I am taking records all from the table EKBE, but I dont know how to classify these records.
Is it based on fields(table EKBE) vgabe & vgabe?
Is the table EKBE correct?
Any tips?
With Regards,
Jaheer.

> 1) I have a contract Number, how to find the Service Entry sheet and P.O. number?
Go to ME2M select scope of list as RAHM, choose contract in the same screen put the required details execute
select the line item from contract go to release details there you can find the history
Also You can Check it in ME33K, Select the line item and go to item details. In quantity and price tab, you can see Target quantity and Released order quantity.
Selection Parameters Tab---->Press F4 from the drop down you can find list of parameters (WE102 & GUTSCHRIFT)
For PO-GR existing, use ME2N & WE102 combination for existing GR list, pls use ctrl+F8 for the selection field for this.
For PO-Invoice, use ME2N & GUTSCHRIFT combination for existing Invoice list ,
> 2) My user wants a to know how much payment company has made agaisnt the each line item of the service entry sheet. Please suggest me the T. code
This is FI reporting & not MM, but you can check this through T-code FBL1N.

History of services entry

Similar Messages

Maybe you are looking for