Hitting the 20Mb upload limit
Our respondents are hitting the 20MB upload limit: is there any way of increasing the restriction? We are limiting each to one 20MB item per 'question' but we still get problems with uploaded scans being refused. (Ironically, they're Adobe PDFs that are causing the problem)
Hi YTKO,
Forms Central only support files size up to 20 MB and there isn't any way to increase it.
Thanks,
Vikrantt Singh
Similar Messages
-
I cannot authorize my new computer in iTunes because I hit the 5 device limit. However, I cannot deauthorize the old one because it's gone. I also cannot use the deauthorize all computers button because I did last year when I was replacing computers. Is there any other way of deauthorizing computers that no longer exist?
harishassan16 wrote:
... Is there any other way of deauthorizing computers that no longer exist?
If you no longer have, or access to, the computer(s) you want to deauthorise,
Log in to iTunes, go to "view your account info" on the itunes store, deauthorise all five,
(Please Note: this can only be done Once every 12 months)
Then re-authorize your current Computer(s) one at a time..
Authorise / Deauthorise About
http://support.apple.com/kb/HT1420
harishassan16 wrote:
... I also cannot use the deauthorize all computers button because I did last year ...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
Hitting the 32k size limit with Keyword Expansion in packages
Hi!
I am hitting the 32k size limit with Keyword Expansion (KE). It is hardcoded in the procedure jr_keyword.analyze_mlt.
Are there any plans to get rid of this limit, so package bodies with size > 32000 bytes can be expanded?Well, I am making progress. With a combination if utl_tcp.get_line() - to trap the header and utl_tcp.get_text - to get the data at 32K chunks - which I then put into a CLOB or VARRAY of VARCHAR2; I can get as much data as is sent.
The problem now is speed.
It takes over 60 seconds to get 160K (5 32K chunks) of data when I put it into the VARRAY of VARCHAR2, and it takes even longer if I use dbms_lob.write() and dbms_lob.writeappend() to store the data.
Am I doing something wrong? Is there another way?
Thank You for any Help.
Shannon -
Is there a way to disable the 20mb download limit in iOS 5?
I currently have an Iphone 4 which I upgraded to iOS 5. I have an unlimited data plan so I am not concerned with going over any limits. I know you can now enable High Quality video over 3g and was wondering if there is a way to disable the 20mb download limit for things like apps or itunes?
Any help appreciated! Thanks!The 20 mb limit is not technical because
using my iPhone tethering I have downloaded
much bigger files. Apple has done this to protect
users from heavy carrier charges for unintentional
usage. Apple should allow the user to
over rule this limit through a setup option.
I don't subscribe to a broadband service, I use my
3G service for both phone and laptop. Its working
fine for me except for this irritation.
I hope this change comes is in a near release
of ios.
btw the battery life has truly improve after
5.1 -
And will I have to pay for an update storage limit for iCloud because I take iTunes Match?
No, your iCloud storage is seperate. I have 42GB of music in my itunes match account and I still have almost all of the 5GB of storage space free. You only have to pay for itunes match once and as long as you don't have more than 25,000 songs in your itunes, you are good to go.
-
is their any way to stop an iphone 4s from using data when i hit the 2gb limit on verizon wireless this way i dont have to pay the fee for extra data
thank youDon't know of any way for it to happen automatically, but you can still use the phone and send/receive sms with cellular data turned off.
-
Hello, I'm new to this FYI. I recently (tonight) submitted my app using the application uploader. It seemed to go through just fine, but after it was done I was hit with a bunch of error messages from the application uploader. However, I nevertheless recieved a confirmation from Apple saying my app was waiting for review...so does this confirmation mean that the upload was actually successfull? Or do I need to delete the binary and re-submit?
Status is also "waiting for review" along with a yellow circle. the binary details all look ok including the .zip file i uploaded. now that i think about it, maybe the error messages were in response to my second upload. because i thought the first one failed, but now I see the .zip is the proper name.
-
How do I change the attachment size limit in Calendar Server 6.3, UWC, IWC?
How do I properly increase or decrease the attachment size limit with Calendar Server and all supported user interfaces to it such as WCAP, UWC (Communications Express) and IWC (Convergence)? From my experience with the Outlook Connector, there seems to be some limit imposed by cshttpd on the size of a file upload (I believe I actually got an HTTP error code back on the wcap request indicating something was too big, sorry I don't have it handy, I'll have to re-test). Additionally, it seems UWC imposes additional limits (Example: http://docs.sun.com/app/docs/doc/819-4440/6n6jfgcjh?l=en&a=view&q=fileSizeHardLimit) but I can't seem to get those to work at all. I found many different web.xml related to UWC and I'm not sure which one to change, I tried a couple but had no success because UWC would always report this error if I uploaded between 4-5 megs: com.iplanet.jato.util.WrapperRuntimeException
Root cause = [java.io.IOException: Request cancelled because file input field
"importFile" size is over the configurable limit of 4194304 bytes; see filter init
parameter fileSizeHardLimit]
And it would complain about requestSizeLimit I think if it was over 5 megs, claiming that limit was 5242880. IWC gives a generic error when the upload is too big and rejects it.
I fear that a 4 meg limit will be too imposing and of limited value, so I would either like to raise it, or consider lowering it to 0 bytes so attachments cannot be used at all. I have been looking high and low for information on how to do this and all I can find is the UWC examples. I plan to support the Outlook Connector, UWC, and IWC so the limits should ideally be the same across each. Some of the Exchange data we wish to import does have some attachments so it would be good to continue support for that. I did see some other posts about quota RFEs but at this point I am not concerned about the disk consumption. Can anyone help? Thanks. Please let me know if there is any more information I can provide. I am running SCS6u1 on Solaris 10 SPARC.Fred@egr wrote:
Thanks!!! This is working with IWC and I am pretty sure it will work with Outlook. I didn't think to look at config options for mshttpd since I don't have it installed and ics.conf doesn't list the http.service.maxmessagesize and service.http.maxpostsize by default.http.service.maxmessagesize is only relevant to mshttpd, not cshttpd. service.http.maxpostsize applies to both.
UWC is still limiting me though; I'm sure I can reconfigure UWC if I just know which file to edit and if I need to redeploy anything. I'm using the same install paths as the SCS6 Single Host example and I'm not sure which the "uwc-deployed-path" is supposed to be. Again, thanks.If you have deployed UWC/CE to Application Server you would edit the following file and restart application-server:
/opt/SUNWappserver/domains/domain1/generated/xml/j2ee-modules/Communications_Express/web.xml
e.g.
<filter>
<filter-name>MultipartFormServletFilter</filter-name>
<filter-class>com.sun.uwc.calclient.MultipartFormServletFilter</filter-class>
<init-param>
<param-name>fileSizeHardLimit</param-name>
<param-value>15485760</param-value>
</init-param>
<init-param>
<param-name>requestSizeLimit</param-name>
<param-value>15485760</param-value>
</init-param>
<init-param>
<param-name>fileSizeLimit</param-name>
<param-value>15485760</param-value>
</init-param>
</filter>Regards,
Shane. -
HT4863 How can I increase the file size limit for outgoing mail. I need to send a file that is 50MB?
How can I increase the file size limit for outgoing mail. I need to send a file that is 50MB?
You can't change it, and I suspect few email providers would allow a file that big. Consider uploading it to a service like Dropbox, then email the link allowing the recipient to download it.
-
How to deal with Upload limit of Document Library
Hi
We are working on SharePoint Online (Office365). We have a requirement to upload files of 20GB+ size. I have come across a limitation that we can't upload files to document library whose size is more than 2GB. Please provide an clarification on this
limitation.
We want our user to upload files up to 20GB. Can we give him an option to upload file using SP Designer. If we can create a folder an user can open site in SPD then they can upload files. Is there any limitation of file size in folder.
If this is not the feasible option kindly suggest us any other way by which we can fulfill this requirement.
Regards
Vikrant KaushalVikrant,
Please see the SharePoint Online Boundaries and Limits document
http://office.microsoft.com/en-gb/office365-sharepoint-online-enterprise-help/sharepoint-online-software-boundaries-and-limits-HA102694293.aspx#_SharePoint_Online_for_2
The 2Gb file limit is a hard limit that cannot be exceeded in either on-premises or cloud based versions of SharePoint due to a SQL/File system limitation.
The best bet that you can do is look at using a storage location based in perhaps Azure and then linking to this location from Office 365. Unfortunately you can't use search crawl for none Office 365 locations, so I would think about using a links list to
surface the large files in SharePoint as a link item, thus making them available to search etc.
Paul
Please ensure that you mark a question as Answered once you receive a satisfactory response. This helps people in future when searching and helps prevent the same questions being asked multiple times. -
Can anybody provide the SQL query to find the files uploaded in a particular folder?
Hi All,
Can anybody provide the SQL query to find the documents (document name) uploaded in a particular folder? While clicking on folder in
GUI I'm hitting the Timeout error. I would like to find the files uploaded into this folder from SQLPLUS.
Any help is greatly appreciated.
With best regards,
NevinNevin,
Be great if we could know the version of Portal. For Rel. 1, here's the query
select id,masterthingid from wwv_things
where siteid = &site
and cornerid = &corner
&site - Content Area id
&corner - Folder id
if you don't know the folder id, use
select id from wwv_corners where siteid = &site
and name = &folder
Hope this helps. I have run into this situation before. Usually, the culprits were
one of the following:
1. Junk Characters in description of item (caused due to Copy-Paste)
2. Special Characters in the File name
Hi All,
Can anybody provide the SQL query to find the documents (document name) uploaded in a particular folder? While clicking on folder in
GUI I'm hitting the Timeout error. I would like to find the files uploaded into this folder from SQLPLUS.
Any help is greatly appreciated.
With best regards,
Nevin -
Guest wireless in 7.0.98 hitting the splash page
I have set up Guest wireless before with my own customized splash screen for local authentication on version 5.xx on a 4404 controller.
I have the same task again but this time with a 2201 controller and the latest ios.
Try as hard as I can i cannot get a guest wireless user to hit the splash page where it gives the certificate warning or past that to the login box.
Is there some subtle difference in the set up with 7.0.98. I did notice that when setting up the DHCP scope for the 7.0.98 i had to use the DHCP server IP as the managment interface. On my last try with 5.x I used the 192.168.80.1 address (the guest WLAN) So there is a difference right there.
Anyway the clients get an IP address so no issue there but i cannot get the cert warning up let alone the splash page. Eveidently there is a tick box I am missing. I wouldnt mide but having done this a few times before I am really stumped. I have wiped the config and started again going through my old notes step by step plus digging out the cisco documentation.
If there any debugging I can stick on please let me know.
Thanks,
NeilThank you :-) Hopefully I have captured everything you need.
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2011.06.27 09:22:56 =~=~=~=~=~=~=~=~=~=~=~=
(Cisco Controller) >show run-config
Press Enter to continue...
System Inventory
NAME: "Chassis" , DESCR: "Cisco Wireless Controller"
PID: AIR-WLC2112-K9, VID: V05, SN: JMX1520Z02W
Burned-in MAC Address............................ 64:00:F1:91:76:40
Press Enter to continue or to abort
System Information
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.0.98.0
RTOS Version..................................... 7.0.98.0
Bootloader Version............................... 4.0.191.0
Emergency Image Version.......................... 7.0.98.0
Build Type....................................... DATA + WPS
System Name...................................... GB-LON-WLC1
System Location.................................. London GHO
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.828
IP Address....................................... 10.y.y.22
System Up Time................................... 2 days 20 hrs 45 mins 31 secs
System Timezone Location.........................
Configured Country............................... GB - United Kingdom
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +48 C
--More or (q)uit current module or to abort
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 2
Number of Active Clients......................... 0
Burned-in MAC Address............................ 64:00:F1:91:76:40
Press Enter to continue or to abort
Switch Configuration
802.3x Flow Control Mode......................... Disable
FIPS prerequisite features....................... Disabled
secret obfuscation............................... Enabled
Press Enter to continue or to abort
Network Information
RF-Network Name............................. lon
Web Mode.................................... Disable
Secure Web Mode............................. Enable
Secure Web Mode Cipher-Option High.......... Disable
Secure Web Mode Cipher-Option SSLv2......... Enable
Secure Shell (ssh).......................... Enable
Telnet...................................... Enable
Ethernet Multicast Forwarding............... Disable
Ethernet Broadcast Forwarding............... Disable
AP Multicast/Broadcast Mode................. Multicast Address : 239.0.1.1
IGMP snooping............................... Disabled
IGMP timeout................................ 60 seconds
User Idle Timeout........................... 300 seconds
ARP Idle Timeout............................ 300 seconds
Cisco AP Default Master..................... Enabled
AP Join Priority............................ Disable
Mgmt Via Wireless Interface................. Disable
Mgmt Via Dynamic Interface.................. Disable
Bridge MAC filter Config.................... Enable
Bridge Security Mode........................ EAP
Mesh Full Sector DFS........................ Enable
--More or (q)uit current module or to abort
AP Fallback ................................ Enable
Web Auth Redirect Ports .................... 80
Fast SSID Change ........................... Disabled
IP/MAC Addr Binding Check .................. Enabled
Press Enter to continue or to abort
Port Summary
STP Admin Physical Physical Link Link
Pr Type Stat Mode Mode Status Status Trap POE
1 Normal Forw Enable Auto 100 Full Up Enable N/A
2 Normal Disa Enable Auto Auto Down Enable N/A
3 Normal Disa Enable Auto Auto Down Enable N/A
4 Normal Disa Enable Auto Auto Down Enable N/A
5 Normal Disa Enable Auto Auto Down Enable N/A
6 Normal Disa Enable Auto Auto Down Enable N/A
7 Normal Disa Enable Auto Auto Down Enable Enable (Power Off)
8 Normal Disa Enable Auto Auto Down Enable Enable (Power Off)
Press Enter to continue or to abort
AP Summary
Number of APs.................................... 1
Global AP User Name.............................. Not Configured
Global AP Dot1x User Name........................ Not Configured
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
londonap1 2 AIR-LAP1131G-E-K9 00:21:d8:48:2b:96 London GHO 1 GB 1
Press Enter to continue or to abort
AP Location
Site Name........................................ GUEST
Site Description................................. GUEST - WebAuth - London
WLAN ID Interface Network Admission Control
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
Site Name........................................ default-group
Site Description.................................
WLAN ID Interface Network Admission Control
1 london-vlan10 Disabled
2 london-guest Disabled
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
GB-LONdon 2 AIR-LAP1131G-E-K9 00:21:d8:48:2b:96 London GHO 1 GB 1
--More or (q)uit current module or to abort
Press Enter to continue or to abort
AP Config
Cisco AP Identifier.............................. 8
Cisco AP Name.................................... Gb-london
Country code..................................... GB - United Kingdom
Regulatory Domain allowed by Country............. 802.11bg:-E 802.11a:-E
AP Country code.................................. GB - United Kingdom
AP Regulatory Domain............................. -E
Switch Port Number .............................. 1
MAC Address...................................... 00:21:d8:48:2b:96
IP Address Configuration......................... DHCP
IP Address....................................... 10.y.y.12
IP NetMask....................................... 255.255.254.0
Gateway IP Addr.................................. 10.y.y.1
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Enabled
Ssh State........................................ Disabled
Cisco AP Location................................ London
Cisco AP Group Name.............................. default-group
Primary Cisco Switch Name........................ London
Primary Cisco Switch IP Address.................. 10.y.y.22
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
--More or (q)uit current module or to abort
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... Local
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.0.98.0
Boot Version ................................... 12.3.8.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Enabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1131G-E-K9
AP Image......................................... C1130-K9W8-M
IOS Version...................................... 12.4(23c)JA
--More or (q)uit current module or to abort
Reset Button..................................... Enabled
AP Serial Number................................. FCW1244V0FQ
AP Certificate Type.............................. Manufacture Installed
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 2 days, 10 h 19 m 12 s
AP LWAPP Up Time................................. 0 days, 00 h 32 m 36 s
Join Date and Time............................... Mon Jun 27 07:50:18 2011
Join Taken Time.................................. 0 days, 00 h 00 m 31 s
Attributes for Slot 0
Radio Type................................... RADIO_TYPE_80211g
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
--More or (q)uit current module or to abort
Number Of WLANs ........................... 2
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 00:23:5e:4a:f9:b0
Operation Rate Set
1000 Kilo Bits........................... MANDATORY
2000 Kilo Bits........................... MANDATORY
5500 Kilo Bits........................... MANDATORY
11000 Kilo Bits.......................... MANDATORY
6000 Kilo Bits........................... SUPPORTED
9000 Kilo Bits........................... SUPPORTED
12000 Kilo Bits.......................... SUPPORTED
18000 Kilo Bits.......................... SUPPORTED
24000 Kilo Bits.......................... SUPPORTED
36000 Kilo Bits.......................... SUPPORTED
48000 Kilo Bits.......................... SUPPORTED
54000 Kilo Bits.......................... SUPPORTED
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String ............................ GB
--More or (q)uit current module or to abort
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 1
Number Of Channels ........................ 13
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
Tx Power
Num Of Supported Power Levels ............. 6
Tx Power Level 1 .......................... 14 dBm
Tx Power Level 2 .......................... 11 dBm
Tx Power Level 3 .......................... 8 dBm
Tx Power Level 4 .......................... 5 dBm
Tx Power Level 5 .......................... 2 dBm
Tx Power Level 6 .......................... -1 dBm
Tx Power Configuration .................... AUTOMATIC
Current Tx Power Level .................... 1
Phy OFDM parameters
--More or (q)uit current module or to abort
Configuration ............................. AUTOMATIC
Current Channel ........................... 1
Extension Channel ......................... NONE
Channel Width.............................. 20 Mhz
Allowed Channel List....................... 1,2,3,4,5,6,7,8,9,10,11,12,
......................................... 13
TI Threshold .............................. -50
Antenna Type............................... INTERNAL_ANTENNA
Internal Antenna Gain (in .5 dBi units).... 8
Diversity.................................. DIVERSITY_ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 12 dB
Coverage exception level................... 25 %
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
--More or (q)uit current module or to abort
CleanAir Management Information
CleanAir Capable......................... No
AP does not have the 802.11a radio.
Press Enter to continue or to abort
Press Enter to continue or to abort
AP Airewave Director Configuration
Number Of Slots.................................. 2
AP Name.......................................... londonap1
MAC Address...................................... 00:21:d8:48:2b:96
Slot ID........................................ 0
Radio Type..................................... RADIO_TYPE_80211b/g
Sub-band Type.................................. All
Noise Information
Noise Profile................................ PASSED
Channel 1.................................... -91 dBm
Channel 2.................................... -88 dBm
Channel 3.................................... -88 dBm
Channel 4.................................... -86 dBm
Channel 5.................................... -86 dBm
Channel 6.................................... -87 dBm
Channel 7.................................... -84 dBm
Channel 8.................................... -88 dBm
Channel 9.................................... -90 dBm
Channel 10................................... -85 dBm
Channel 11................................... -83 dBm
Channel 12................................... -89 dBm
Channel 13................................... -89 dBm
Interference Information
--More or (q)uit current module or to abort
Interference Profile......................... PASSED
Channel 1.................................... -63 dBm @ 1 % busy
Channel 2.................................... -128 dBm @ 0 % busy
Channel 3.................................... -63 dBm @ 2 % busy
Channel 4.................................... -46 dBm @ 8 % busy
Channel 5.................................... -44 dBm @ 2 % busy
Channel 6.................................... -64 dBm @ 1 % busy
Channel 7.................................... -46 dBm @ 4 % busy
Channel 8.................................... -128 dBm @ 0 % busy
Channel 9.................................... -70 dBm @ 4 % busy
Channel 10................................... -128 dBm @ 0 % busy
Channel 11................................... -65 dBm @ 14 % busy
Channel 12................................... -128 dBm @ 0 % busy
Channel 13................................... -128 dBm @ 0 % busy
Load Information
Load Profile................................. PASSED
Receive Utilization.......................... 0 %
Transmit Utilization......................... 9 %
Channel Utilization.......................... 14 %
Attached Clients............................. 0 clients
Coverage Information
Coverage Profile............................. PASSED
Failed Clients............................... 0 clients
--More or (q)uit current module or to abort
Client Signal Strengths
RSSI -100 dbm................................ 0 clients
RSSI -92 dbm................................ 0 clients
RSSI -84 dbm................................ 0 clients
RSSI -76 dbm................................ 0 clients
RSSI -68 dbm................................ 0 clients
RSSI -60 dbm................................ 0 clients
RSSI -52 dbm................................ 0 clients
Client Signal To Noise Ratios
SNR 0 dB.................................. 0 clients
SNR 5 dB.................................. 0 clients
SNR 10 dB.................................. 0 clients
SNR 15 dB.................................. 0 clients
SNR 20 dB.................................. 0 clients
SNR 25 dB.................................. 0 clients
SNR 30 dB.................................. 0 clients
SNR 35 dB.................................. 0 clients
SNR 40 dB.................................. 0 clients
SNR 45 dB.................................. 0 clients
Nearby APs
Radar Information
Channel Assignment Information
Current Channel Average Energy............... unknown
--More or (q)uit current module or to abort
Previous Channel Average Energy.............. unknown
Channel Change Count......................... 0
Last Channel Change Time..................... Mon Jun 27 07:50:15 2011
Recommended Best Channel..................... 1
RF Parameter Recommendations
Power Level.................................. 1
RTS/CTS Threshold............................ 2347
Fragmentation Tnreshold...................... 2346
Antenna Pattern.............................. 0
Persistent Interference Devices
Classtype Channel DC (%%) RSSI (dBm) Last Update Time
All third party trademarks are the property of their respective owners.
AP does not have the 802.11a radio.
Press Enter to continue or to abort
Press Enter to continue or to abort
802.11a Configuration
802.11a Network.................................. Enabled
11nSupport....................................... Enabled
802.11a Low Band........................... Enabled
802.11a Mid Band........................... Enabled
802.11a High Band.......................... Enabled
802.11a Operational Rates
802.11a 6M Rate.............................. Mandatory
802.11a 9M Rate.............................. Supported
802.11a 12M Rate............................. Mandatory
802.11a 18M Rate............................. Supported
802.11a 24M Rate............................. Mandatory
802.11a 36M Rate............................. Supported
802.11a 48M Rate............................. Supported
802.11a 54M Rate............................. Supported
802.11n MCS Settings:
MCS 0........................................ Supported
MCS 1........................................ Supported
MCS 2........................................ Supported
MCS 3........................................ Supported
MCS 4........................................ Supported
MCS 5........................................ Supported
MCS 6........................................ Supported
--More or (q)uit current module or to abort
MCS 7........................................ Supported
MCS 8........................................ Supported
MCS 9........................................ Supported
MCS 10....................................... Supported
MCS 11....................................... Supported
MCS 12....................................... Supported
MCS 13....................................... Supported
MCS 14....................................... Supported
MCS 15....................................... Supported
802.11n Status:
A-MPDU Tx:
Priority 0............................... Enabled
Priority 1............................... Disabled
Priority 2............................... Disabled
Priority 3............................... Disabled
Priority 4............................... Enabled
Priority 5............................... Enabled
Priority 6............................... Disabled
Priority 7............................... Disabled
Guard Interval .............................. Any
Beacon Interval.................................. 100
CF Pollable mandatory............................ Disabled
CF Poll Request mandatory........................ Disabled
--More or (q)uit current module or to abort
CFP Period....................................... 4
CFP Maximum Duration............................. 60
Default Channel.................................. 36
Default Tx Power Level........................... 0
DTPC Status..................................... Enabled
Fragmentation Threshold.......................... 2346
TI Threshold..................................... -50
Legacy Tx Beamforming setting.................... Disabled
Traffic Stream Metrics Status.................... Disabled
Expedited BW Request Status...................... Disabled
World Mode....................................... Enabled
EDCA profile type................................ default-wmm
Voice MAC optimization status.................... Disabled
Call Admission Control (CAC) configuration
Voice AC:
Voice AC - Admission control (ACM)............ Disabled
Voice max RF bandwidth........................ 75
Voice reserved roaming bandwidth.............. 6
Voice load-based CAC mode..................... Disabled
Voice tspec inactivity timeout................ Disabled
Voice max limit on number of call............. 0
CAC SIP-Voice configuration
SIP Codec Type ............................... CODEC_TYPE_G711
--More or (q)uit current module or to abort
SIP call bandwidth ........................... 64
SIP call bandwith sample-size ................ 20
Voice Stream-Size............................. 84000
Voice Max-Streams............................. 2
Video AC:
Video AC - Admission control (ACM)............ Disabled
Video max RF bandwidth........................ Infinite
Video reserved roaming bandwidth.............. 0
Best-effort AC - Admission control (ACM)...... Disabled
Background AC - Admission control (ACM)....... Disabled
Press Enter to continue or to abort
802.11a Advanced Configuration
AP Name MAC Address Admin State Operation State Channel TxPower
Press Enter to continue or to abort
802.11a Airewave Director Configuration
RF Event and Performance Logging
Channel Update Logging......................... Off
Coverage Profile Logging....................... Off
Foreign Profile Logging........................ Off
Load Profile Logging........................... Off
Noise Profile Logging.......................... Off
Performance Profile Logging.................... Off
TxPower Update Logging......................... Off
Default 802.11a AP performance profiles
802.11a Global Interference threshold.......... 10 %
802.11a Global noise threshold................. -70 dBm
802.11a Global RF utilization threshold........ 80 %
802.11a Global throughput threshold............ 1000000 bps
802.11a Global clients threshold............... 12 clients
Default 802.11a AP monitoring
802.11a Monitor Mode........................... enable
802.11a Monitor Mode for Mesh AP Backhaul...... disable
802.11a Monitor Channels....................... Country channels
802.11a AP Coverage Interval................... 180 seconds
802.11a AP Load Interval....................... 60 seconds
802.11a AP Noise Interval...................... 180 seconds
--More or (q)uit current module or to abort
802.11a AP Signal Strength Interval............ 60 seconds
Automatic Transmit Power Assignment
Transmit Power Assignment Mode................. AUTO
Transmit Power Update Interval................. 600 seconds
Transmit Power Threshold....................... -70 dBm
Transmit Power Neighbor Count.................. 3 APs
Min Transmit Power............................. -100 dBm
Max Transmit Power............................. 100 dBm
Transmit Power Update Contribution............. SNI..
Transmit Power Assignment Leader............... GB-LON-WLC1 (10.y.y.22)
Last Run....................................... 116 seconds ago
Coverage Hole Detection
802.11a Coverage Hole Detection Mode........... Enabled
802.11a Coverage Voice Packet Count............ 100 packets
802.11a Coverage Voice Packet Percentage....... 50%
802.11a Coverage Voice RSSI Threshold.......... -80 dBm
802.11a Coverage Data Packet Count............. 50 packets
802.11a Coverage Data Packet Percentage........ 50%
802.11a Coverage Data RSSI Threshold........... -80 dBm
802.11a Global coverage exception level........ 25 %
802.11a Global client minimum exception lev.... 3 clients
Automatic Channel Assignment
Channel Assignment Mode........................ AUTO
--More or (q)uit current module or to abort
Channel Update Interval........................ 600 seconds
Anchor time (Hour of the day).................. 0
Channel Update Contribution.................... SNI..
CleanAir Event-driven RRM option............... Disabled
CleanAir Event-driven RRM sensitivity.......... Medium
Channel Assignment Leader...................... GB-LON-WLC1 (10.y.y.22)
Last Run....................................... 116 seconds ago
DCA Sensitivity Level.......................... MEDIUM (15 dB)
DCA 802.11n Channel Width...................... 20 MHz
DCA Minimum Energy Limit....................... -95 dBm
Channel Energy Levels
Minimum...................................... unknown
Average...................................... unknown
Maximum...................................... unknown
Channel Dwell Times
Minimum...................................... unknown
Average...................................... unknown
Maximum...................................... unknown
802.11a 5 GHz Auto-RF Channel List
Allowed Channel List......................... 36,40,44,48,52,56,60,64
Unused Channel List.......................... 100,104,108,112,116,120,124,
128,132,136,140
DCA Outdoor AP option.......................... Disabled
--More or (q)uit current module or to abort
Radio RF Grouping
802.11a Group Mode............................. AUTO
802.11a Group Update Interval.................. 600 seconds
802.11a Group Leader........................... GB-LON-WLC1 (10.44.64.22)
802.11a Group Member......................... GB-LON-WLC1 (10.44.64.22)
802.11a Last Run............................... 116 seconds ago
802.11a CleanAir Configuration
Clean Air Solution............................... Disabled
Air Quality Settings:
Air Quality Reporting........................ Enabled
Air Quality Reporting Period (min)........... 15
Air Quality Alarms........................... Enabled
Air Quality Alarm Threshold.................. 35
Interference Device Settings:
Interference Device Reporting................ Enabled
Interference Device Types:
TDD Transmitter.......................... Enabled
Jammer................................... Enabled
Continuous Transmitter................... Enabled
DECT-like Phone.......................... Enabled
Video Camera............................. Enabled
WiFi Inverted............................ Enabled
--More or (q)uit current module or to abort
WiFi Invalid Channel..................... Enabled
SuperAG.................................. Enabled
Canopy................................... Enabled
WiMax Mobile............................. Enabled
WiMax Fixed.............................. Enabled
Interference Device Alarms................... Enabled
Interference Device Types Triggering Alarms:
TDD Transmitter.......................... Disabled
Jammer................................... Enabled
Continuous Transmitter................... Disabled
DECT-like Phone.......................... Disabled
Video Camera............................. Disabled
WiFi Inverted............................ Enabled
WiFi Invalid Channel..................... Enabled
SuperAG.................................. Disabled
Canopy................................... Disabled
WiMax Mobile............................. Disabled
WiMax Fixed.............................. Disabled
Additional Clean Air Settings:
CleanAir Event-driven RRM State.............. Disabled
CleanAir Driven RRM Sensitivity.............. Medium
CleanAir Persistent Devices state............ Disabled
--More or (q)uit current module or to abort
802.11a CleanAir AirQuality Summary
AQ = Air Quality
DFS = Dynamic Frequency Selection
AP Name Channel Avg AQ Min AQ Interferers DFS
Press Enter to continue or to abort
802.11b Configuration
802.11b Network.................................. Enabled
11gSupport....................................... Enabled
11nSupport....................................... Enabled
802.11b/g Operational Rates
802.11b/g 1M Rate............................ Mandatory
802.11b/g 2M Rate............................ Mandatory
802.11b/g 5.5M Rate.......................... Mandatory
802.11b/g 11M Rate........................... Mandatory
802.11g 6M Rate.............................. Supported
802.11g 9M Rate.............................. Supported
802.11g 12M Rate............................. Supported
802.11g 18M Rate............................. Supported
802.11g 24M Rate............................. Supported
802.11g 36M Rate............................. Supported
802.11g 48M Rate............................. Supported
802.11g 54M Rate............................. Supported
802.11n MCS Settings:
MCS 0........................................ Supported
MCS 1........................................ Supported
MCS 2........................................ Supported
MCS 3........................................ Supported
MCS 4........................................ Supported
--More or (q)uit current module or to abort
MCS 5........................................ Supported
MCS 6........................................ Supported
MCS 7........................................ Supported
MCS 8........................................ Supported
MCS 9........................................ Supported
MCS 10....................................... Supported
MCS 11....................................... Supported
MCS 12....................................... Supported
MCS 13....................................... Supported
MCS 14....................................... Supported
MCS 15....................................... Supported
802.11n Status:
A-MPDU Tx:
Priority 0............................... Enabled
Priority 1............................... Disabled
Priority 2............................... Disabled
Priority 3............................... Disabled
Priority 4............................... Enabled
Priority 5............................... Enabled
Priority 6............................... Disabled
Priority 7............................... Disabled
Guard Interval .............................. Any
Beacon Interval.................................. 100
--More or (q)uit current module or to abort
CF Pollable mode................................. Disabled
CF Poll Request mandatory........................ Disabled
CFP Period....................................... 4
CFP Maximum Duration............................. 60
Default Channel.................................. 1
Default Tx Power Level........................... 0
DTPC Status..................................... Enabled
Call Admission Limit ........................... 105
G711 CU Quantum ................................. 15
ED Threshold..................................... -50
Fragmentation Threshold.......................... 2346
PBCC mandatory................................... Disabled
RTS Threshold.................................... 2347
Short Preamble mandatory......................... Enabled
Short Retry Limit................................ 7
Legacy Tx Beamforming setting.................... Disabled
Traffic Stream Metrics Status.................... Disabled
Expedited BW Request Status...................... Disabled
World Mode....................................... Enabled
Faster Carrier Tracking Loop..................... Disabled
EDCA profile type................................ default-wmm
Voice MAC optimization status.................... Disabled
Call Admission Control (CAC) configuration
--More or (q)uit current module or to abort
Voice AC - Admission control (ACM)............ Disabled
Voice Stream-Size............................. 84000
Voice Max-Streams............................. 2
Voice max RF bandwidth........................ 75
Voice reserved roaming bandwidth.............. 6
Voice load-based CAC mode..................... Disabled
Voice tspec inactivity timeout................ Disabled
Voice max limit on number of call............. 0
CAC SIP-Voice configuration
SIP Codec Type ............................... CODEC_TYPE_G711
SIP call bandwidth: .......................... 64
SIP call bandwidth sample-size ............... 20
Video AC - Admission control (ACM)............ Disabled
Video max RF bandwidth........................ 50
Video reserved roaming bandwidth.............. 0
Best-effort AC - Admission control (ACM)...... Disabled
Background AC - Admission control (ACM)....... Disabled
Press Enter to continue or to abort
802.11b Advanced Configuration
AP Name MAC Address Admin State Operation State Channel TxPower
londonap1 00:23:5e:4a:f9:b0 ENABLED UP 1* 1(*)
Press Enter to continue or to abort
802.11b Airewave Director Configuration
RF Event and Performance Logging
Channel Update Logging......................... Off
Coverage Profile Logging....................... Off
Foreign Profile Logging........................ Off
Load Profile Logging........................... Off
Noise Profile Logging.......................... Off
Performance Profile Logging.................... Off
Transmit Power Update Logging.................. Off
Default 802.11b AP performance profiles
802.11b Global Interference threshold.......... 10 %
802.11b Global noise threshold................. -70 dBm
802.11b Global RF utilization threshold........ 80 %
802.11b Global throughput threshold............ 1000000 bps
802.11b Global clients threshold............... 12 clients
Default 802.11b AP monitoring
802.11b Monitor Mode........................... enable
802.11b Monitor Channels....................... Country channels
802.11b AP Coverage Interval................... 180 seconds
802.11b AP Load Interval....................... 60 seconds
802.11b AP Noise Interval...................... 180 seconds
802.11b AP Signal Strength Interval............ 60 seconds
--More or (q)uit current module or to abort
Automatic Transmit Power Assignment
Transmit Power Assignment Mode................. AUTO
Transmit Power Update Interval................. 600 seconds
Transmit Power Threshold....................... -70 dBm
Transmit Power Neighbor Count.................. 3 APs
Min Transmit Power............................. -100 dBm
Max Transmit Power............................. 100 dBm
Transmit Power Update Contribution............. SNI..
Transmit Power Assignment Leader............... GB-LON-WLC1 (10.44.64.22)
Last Run....................................... 530 seconds ago
Coverage Hole Detection
802.11b Coverage Hole Detection Mode........... Enabled
802.11b Coverage Voice Packet Count............ 100 packets
802.11b Coverage Voice Packet Percentage....... 50%
802.11b Coverage Voice RSSI Threshold.......... -80 dBm
802.11b Coverage Data Packet Count............. 50 packets
802.11b Coverage Data Packet Percentage........ 50%
802.11b Coverage Data RSSI Threshold........... -80 dBm
802.11b Global coverage exception level........ 25 %
802.11b Global client minimum exception lev.... 3 clients
Automatic Channel Assignment
Channel Assignment Mode........................ AUTO
Channel Update Interval........................ 600 seconds
--More or (q)uit current module or to abort
Anchor time (Hour of the day).................. 0
Channel Update Contribution.................... SNI..
CleanAir Event-driven RRM option............... Disabled
CleanAir Event-driven RRM sensitivity.......... Medium
Channel Assignment Leader...................... GB-LON-WLC1 (10.44.64.22)
Last Run....................................... 530 seconds ago
DCA Sensitivity Level: ...................... MEDIUM (10 dB)
DCA Minimum Energy Limit....................... -95 dBm
Channel Energy Levels
Minimum...................................... unknown
Average...................................... unknown
Maximum...................................... unknown
Channel Dwell Times
Minimum...................................... 0 days, 00 h 33 m 07 s
Average...................................... 0 days, 00 h 33 m 07 s
Maximum...................................... 0 days, 00 h 33 m 07 s
802.11b Auto-RF Allowed Channel List........... 1,6,11
Auto-RF Unused Channel List.................... 2,3,4,5,7,8,9,10,12,13
Radio RF Grouping
802.11b Group Mode............................. AUTO
802.11b Group Update Interval.................. 600 seconds
802.11b Group Leader........................... GB-LON-WLC1 (10.44.64.22)
--More or (q)uit current module or to abort
802.11b Group Member......................... GB-LON-WLC1 (10.44.64.22)
802.11b Last Run............................... 530 seconds ago
802.11a CleanAir Configuration
Clean Air Solution............................... Disabled
Air Quality Settings:
Air Quality Reporting........................ Enabled
Air Quality Reporting Period (min)........... 15
Air Quality Alarms........................... Enabled
Air Quality Alarm Threshold.................. 35
Interference Device Settings:
Interference Device Reporting................ Enabled
Interference Device Types:
Bluetooth Link........................... Enabled
Microwave Oven........................... Enabled
802.11 FH................................ Enabled
Bluetooth Discovery...................... Enabled
TDD Transmitter.......................... Enabled
Jammer................................... Enabled
Continuous Transmitter................... Enabled
DECT-like Phone.......................... Enabled
Video Camera............................. Enabled
802.15.4................................. Enabled
--More or (q)uit current module or to abort
WiFi Inverted............................ Enabled
WiFi Invalid Channel..................... Enabled
SuperAG.................................. Enabled
Canopy................................... Enabled
Xbox..................................... Enabled
WiMax Mobile............................. Enabled
WiMax Fixed.............................. Enabled
Interference Device Alarms................... Enabled
Interference Device Types Triggering Alarms:
Bluetooth Link........................... Disabled
Microwave Oven........................... Disabled
802.11 FH................................ Disabled
Bluetooth Discovery...................... Disabled
TDD Transmitter.......................... Disabled
Jammer................................... Enabled
Continuous Transmitter................... Disabled
DECT-like Phone.......................... Disabled
Video Camera............................. Disabled
802.15.4................................. Disabled
WiFi Inverted............................ Enabled
WiFi Invalid Channel..................... Enabled
SuperAG.................................. Disabled
Canopy................................... Disabled
--More or (q)uit current module or to abort
Xbox..................................... Disabled
WiMax Mobile............................. Disabled
WiMax Fixed.............................. Disabled
Additional Clean Air Settings:
CleanAir Event-driven RRM State.............. Disabled
CleanAir Driven RRM Sensitivity.............. Medium
CleanAir Persistent Devices state............ Disabled
802.11a CleanAir AirQuality Summary
AQ = Air Quality
DFS = Dynamic Frequency Selection
AP Name Channel Avg AQ Min AQ Interferers DFS
Press Enter to continue or to abort
q
Mobility Configuration
Symmetric Mobility Tunneling (current) .......... Enabled
Symmetric Mobility Tunneling (after reboot) ..... Enabled
Mobility Protocol Port........................... 16666
Default Mobility Domain.......................... lon
Multicast Mode .................................. Disabled
Mobility Domain ID for 802.11r................... 0x209c
Mobility Keepalive Interval...................... 10
Mobility Keepalive Count......................... 3
Mobility Group Members Configured................ 1
Mobility Control Message DSCP Value.............. 0
Controllers configured in the Mobility Group
MAC Address IP Address Group Name Multicast IP Status
64:00:f1:91:76:40 10.44.64.22 lon 0.0.0.0 Up
Press Enter to continue or to abort
Advanced Configuration
Probe request filtering.......................... Enabled
Probes fwd to controller per client per radio.... 2
Probe request rate-limiting interval............. 500 msec
Aggregate Probe request interval................. 500 msec
EAP-Identity-Request Timeout (seconds)........... 30
EAP-Identity-Request Max Retries................. 2
EAP Key-Index for Dynamic WEP.................... 0
EAP Max-Login Ignore Identity Response........... enable
EAP-Request Timeout (seconds).................... 30
EAP-Request Max Retries.......................... 2
EAPOL-Key Timeout (milliseconds)................. 1000
EAPOL-Key Max Retries............................ 2
dot11-padding.................................... Disabled
Press Enter to continue or to abort
Location Configuration
RFID Tag data Collection......................... Enabled
RFID timeout.................................... 1200 seconds
RFID mobility.................................... Oui:00:14:7e : Vendor:pango State:Disabled
Press Enter to continue or to abort
Interface Configuration
Interface Name................................... ap-manager
MAC Address...................................... 64:00:f1:91:76:40
IP Address....................................... 10.y.y.23
IP Netmask....................................... 255.255.254.0
IP Gateway....................................... 10.y.y.1
External NAT IP State............................ Disabled
External NAT IP Address.......................... 0.0.0.0
VLAN............................................. untagged
Physical Port.................................... 1
Primary DHCP Server.............................. 10.y.y.19
Secondary DHCP Server............................ Unconfigured
DHCP Option 82................................... Disabled
ACL.............................................. Unconfigured
AP Manager....................................... Yes
Guest Interface.................................. No
Interface Name................................... guest
MAC Address...................................... 64:00:f1:91:76:40
IP Address....................................... 192.168.x.1
IP Netmask....................................... 255.255.255.0
IP Gateway....................................... 192.168.x.2
External NAT IP State............................ Disabled
External NAT IP Address.......................... 0.0.0.0
VLAN............................................. 80
Quarantine-vlan.................................. 0
Physical Port.................................... 1
Primary DHCP Server.............................. Unconfigured
Secondary DHCP Server............................ Unconfigured
DHCP Option 82................................... Disabled
ACL.............................................. Unconfigured
AP Manager....................................... No
Guest Interface.................................. No
Interface Name................................... london-vlan10
MAC Address...................................... 64:00:f1:91:76:40
IP Address....................................... 10.x.x.149
IP Netmask....................................... 255.255.255.0
IP Gateway....................................... 10.x.x.20
External NAT IP State............................ Disabled
External NAT IP Address.......................... 0.0.0.0
VLAN............................................. 10
Quarantine-vlan.................................. 0
Physical Port.................................... 1
Primary DHCP Server.............................. 10.44.64.19
Secondary DHCP Server............................ Unconfigured
DHCP Option 82................................... Disabled
ACL.............................................. Unconfigured
AP Manager....................................... No
Guest Interface.................................. No
Interface Name................................... management
MAC Address...................................... 64:00:f1:91:76:40
IP Address....................................... 10.y.y.22
IP Netmask....................................... 255.255.254.0
IP Gateway....................................... 10.y.y.1
External NAT IP State............................ Disabled
External NAT IP Address.......................... 0.0.0.0
VLAN............................................. untagged
Quarantine-vlan.................................. 0
Physical Port.................................... 1
Primary DHCP Server.............................. 10.y.y.19
Secondary DHCP Server............................ Unconfigured
DHCP Option 82................................... Disabled
ACL.............................................. Unconfigured
AP Manager....................................... No
Guest Interface.................................. No
Interface Name................................... virtual
MAC Address...................................... 64:00:f1:91:76:40
IP Address....................................... 1.1.1.1
DHCP Option 82................................... Disabled
Virtual DNS Host Name............................ Disabled
AP Manager....................................... No
Guest Interface.................................. No
Press Enter to continue or to abort
WLAN Configuration
WLAN Identifier.................................. 1
Profile Name..................................... corporate
Network Name (SSID).............................. corporate
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
NAC-State...................................... Disabled
Quarantine VLAN................................ 0
Number of Active Clients......................... 0
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 1800 seconds
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ london-vlan10
WLAN ACL......................................... unconfigured
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
--More or (q)uit current module or to abort
WLAN Configuration
WLAN Identifier.................................. 2
Profile Name..................................... Guest
Network Name (SSID).............................. GUEST
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
NAC-State...................................... Disabled
Quarantine VLAN................................ 0
Number of Active Clients......................... 0
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 1800 seconds
CHD per WLAN..................................... Disabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ Guest-network
WLAN ACL......................................... unconfigured
DHCP Server...................................... 10.44.64.22
DHCP Address Assignment Required................. Enabled
--More or (q)uit current module or to abort
Quality of Service............................... Silver (best effort)
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
IPv6 Support..................................... Disabled
Passive Client Feature........................... Disabled
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ Disabled
Accounting.................................... Disabled
Dynamic Interface............................. Disabled
Local EAP Authentication......................... Disabled
Security
--More or (q)uit current module or to abort
802.11 Authentication:........................ Open System
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Disabled
CKIP ......................................... Disabled
Web Based Authentication...................... Enabled
ACL............................................. Unconfigured
Web Authentication server precedence:
1............................................... local
2............................................... radius
3............................................... ldap
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Disabled
H-REAP Local Switching........................ Disabled
H-REAP Learn IP Address....................... Enabled
Client MFP.................................... Optional but inactive (WPA2 not configured)
Tkip MIC Countermeasure Hold-down Timer....... 60
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
--More or (q)uit current module or to abort
Mobility Anchor List
WLAN ID IP Address Status
Press Enter to continue or to abort
Press Enter to continue or to abort
ACL Configuration
Press Enter to continue or to abort
CPU ACL Configuration
CPU Acl Name................................ NOT CONFIGURED
Wireless Traffic............................ Disabled
Wired Traffic............................... Disabled
Press Enter to continue or to abort
RADIUS Configuration
Vendor Id Backward Compatibility................. Disabled
Call Station Id Case............................. lower
Call Station Id Type............................. IP Address
Aggressive Failover.............................. Enabled
Keywrap.......................................... Disabled
Fallback Test:
Test Mode.................................... Off
Probe User Name.............................. cisco-probe
Interval (in seconds)........................ 300
MAC Delimite -
Hi everyone.
In WSE 2012 R2 it is possible to upload up to 2 Gb at once. Is it possible to change this value? Maybe somewhere in registry?
Thanks for help.Hi,
Based on your description, please refer to the following similar question. And check if it’s helpful.
File size upload limit
http://social.technet.microsoft.com/Forums/windowsserver/en-US/0f961d6b-6074-460d-b3db-e71fbc4689ff/file-size-upload-limit?forum=winserveressentials
Hope this helps.
Best regards,
Justin Gu -
Question re how iPlanet Directory Server applies the Look Through Limit.
I have a question on how iPlanet Directory Server applies the lookthrough limit...
I am running an LDAP search on a 4.13 directory. The search filter is:
"(&(rtrdaMaturityDate>=20020128)(rtrdaMaturityDate<=20020130))"
rtrdaMaturityDate is an int, and indexed with pres,eq,sub
There are 244680 entries where rtrdamaturityDate>=20020128
383005 entries where rtrdaMaturityDate<=20020130
484 entries which satisfy both conditions
When the query is run as Directory Manager it just hangs (presumably it would complete eventually).
When run as another user it gives a size limit error. The size limit and lookthrough limit on the directory are both 5000 . As the matching number of entries doesn't exceed the size limit, I think perhaps it is the lookthrough limit causing the problem...
It looks as if it treats each part of the filter separately, building an candidate list for each, giving an error if both reach the look through limit. i.e. it does not realise that both parts of the filter could be treated together.
Is this correct ?
This theory is born out by the fact that if I change the value so the filter would logically return only the highest few values, the search works (i.e. as if the <= filter condition hit LTL, but the >= did not).
Also, if I add another condition to give "(&(rtrdaIssuerBgNid=4403)(rtrdamaturityDate>=20020128)(rtrdaMaturityDate<=20020130))" then the search eventually correctly returns a single entry. (IssuerBgNid=4403 on its own gives 1004 entries).
Can I therefore assume that a seach will only work if at least one condition in the filter gives a candidate list with less entries than the look through limit?
Any advice on how to implement a range search like this would also be much appreciated.
Thanks,
Dave.The lookthrough limit is reached when the resulting candidate list contains more entries than the limit...
Lookthrough limit has been implemented specifically to for Range filters (and OR filters) to avoid consuming too many resources.
For your particular problem, you can increase the lookthrough limit... but it will affect all users and searches.
Note that iPlanet Directory Server 5.x does provide a per User LookThrough Limit (and other limits as well), therefore you could just increase the lookthrough limit for the specific users performing these searches.
Regards,
Ludovic. -
What's with the 20mb cap on 3G downloads?
I just got my 64 gb iPad 3G and when tried to update some of my apps it said "app over 20mb please connect to a wifi network or update application on your computer with iTunes" or something along those lines. I signed up for the unlimited data plan with AT&T and I just would like to know why there is this storage cap when I am paying $30 a month for Internet on my iPad.
Unfortuantly, Apple being Short sited, put this limit into the system, They were a bit Anal on this, due to possible reasons that they needed AT&T to help with their role out and acceptance criteria. They forget that many places have unlimited option on 3G, Like here in Hong Kong, I can stream Gigs of Radio through my 3G, but can I down load a 20meg app store? can I ek.
But there is a work around....
I put the 3G sim in my pocket wifi, and I can download the app. So this stupid limit is mindless. I heard that whe they get the Jailbreak, this limit will be removed, but I won't jailbreak, I prefer the system in its unaltered state. I might even suggest that the limit is applied by the App store and not really an OS limit, so they can remove it at any time, but just like any Typical Amarican Company, They can't think for over seas markets, nore Average users, infact, Apple has become the big brother they originally claimed to be fighting.
Pocket Wifi!
Or Visit a coffee Shop!
Maybe you are looking for
-
Hi, My network went down earlier in the week. Now the network is fine, I can connect through the ethernet cable, but my macbook airport no longer detects it, when prompted, macbook will find it, but I get asked for the WAP. When I put the password
-
Windows 7 home premium won't let me install HP Officejet Pro 8500 A909
I've tried downloading Windows 7 drives from HP but I still get and x saying isn't supported by this OS. Is there anything I can do? Thanks
-
Any way to export table to excel file with leading 0s?
I have to export about 50 excel files from different tables. Some tables contain leading 0s in the columns. If I use bcp to export to xls file, the leading 0s will be missing. If bcp to csv or txt file, there will be no issue at all. But I have t
-
Storage bin 320 902 does not exist (check your entry)
Storage bin 320 902 does not exist (check your entry) Message no. L9009 I have created the new bins in the interim storage area 902. In the table LPAG also the storage bins are visible. I am creating thre GR for the PO in the system but still gettin
-
9.3.1 to 9.3.3 Upgrade - Configuration utility does not start
Hello, I am trying to upgrade my 9.3.1 environment (Tomcat/Oracle DB) to 9.3.3. I was able to upgrade Shared Services without issue. The next step from the upgrade documentation was to upgrade Essbase Client (again no issues), then Essbase server. At