HKEY_LOCAL_MACHINE SOFTWARE\microsoft\window\currentversionrun error

I try installing itunes but an error came out
HKEY-LOCAL_MACHINE SOFTWARE\microsoft\window\currentversionrun
Anyone can help?

are you installing iTunes from inside a user account with administrative privileges?

Similar Messages

  • Problems installing Itunes error message - Hkey_local_machine\software\microsoft\windows\currentversion\run - Verify that you have sufficient access to that key, or contact your support personnel

    Can anyone help? I have been trying to install the new version of Itunes for ages my new iphone wont activate on the old version!! Keep getting the same error message -  Hkey_local_machine\software\microsoft\windows\currentversion\run - Verify that you have sufficient access to that key, or contact your support personnel.
    Please Help!!!!!

    That particular key can sometimes be hit by malware, liam, so just to be on the safe side I think we should try a malware scan first.
    Try downloading and installing the free version of Malwarebytes AntiMalware. Update your MBAM definitions and then run a full scan of the PC. (Takes about 2 hour on my Lenovo.)
    http://www.malwarebytes.org/mbam.php
    Does the scan find any infections? If so, please paste the contents of the log file for the scan in a reply here so we can have a look

  • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\LanguagePack\OpenType

    Can I delete the key as below?
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\LanguagePack\OpenType
    At Windows XP,if I want to run my application,I have to delete the key.But at Windows 7,when I delete the key,notepad.exe can't work.
    Please tell me the use of the key?Many thanks.
    By the way,
    Opening notepad is no problem,but when I input something,there is error dialog with the message of "notepad is stopped,please end it or debug it"
    The application I run is a VC++ program that was developped by visual stuido.Because my application uses peculiar font,without deleting the key,when I run my application,　a ruled line　can't be displayed rightly.That is to say,I got messy code.Would you please tell me how can I use my font without messy code?Many thanks.

    http://msdn.microsoft.com/en-us/goglobal/bb688134.aspx
    i believe that's the font that notepad uses. i wonder whether using the instructions above if you could change the font.
    T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    If someone helped you today, pay it forward. Help Someone Else!
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing\Packages CurrentState

    Can anyone tell me what the possible values are for the CurrentState value of a package under
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing\Packages
    For Example:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing\Packages\Package_1_for_KB2900986~31bf3856ad364e35~amd64~~6.1.1.1
    "CurrentState"=dword:00000070
    I believe that this equates to "Installed", but I am looking for somewhere that documents this.
    I located http://technet.microsoft.com/en-us/library/cc756248%28v=ws.10%29.aspx and the related events pages show values like 0, 4, 5, 6, 7.  Not x00000070 (112) etc
    Thanks In Advance
    Jim

    Hi Jim,
    Thank you for your post.
    From your description, I see that you want to know if there is a related official article which introduces the value of CurrentState (dword:00000070) under
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing\Packages.
    Please let me know if I have misunderstood anything.
    Based on my research, I'm sorry that it appears that there is not a corresponding official document which can meet your requirement. However, according to my knowledge, 99% of the time the value will be 00000070 for CurrentState.
    Currently, I'd like to confirm that if there is any real problem occurs due to the registry value? If so, then we may find another way to help with you.
    Please feel free to let me know if you have any questions. Thank you for your time and understanding.
    Best Regards,
    Sophis Sun
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Key "System" (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon) is legal on Windows 7

    Many infected computers (Windows 7 Home Basic etc.) have different value on System (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon), like this
    System = "C:\Users\user\AppData\Local\Temp\22.exe" - (this infected value)
    Where can I see all legal keys on brach HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon for Windows 7, as I see on Windows  7 Home Basic (not infected) isn't key System (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon).
    Could anyone from Microsoft Support say clearly and precisely if key "System" is legal or not for OS: Windows 7.
    P.S. On Windows XP, I know that key "System" ((HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon))is legal.

    No, the key, System, is not a part of default configuration and has been created by the malware. You can delete the key. Winlogon contains the settings and details of files that needs to be loaded when a user logs in. Malwares usually create a value entry
    here or modify an existing entry to match their custom configuration. The key is important, so kindly keep the same. But as for the entries, check each entry and remove/modify the ones that point to any malware file (usually have strange location, like C:\Users\user\AppData\Local\Temp\22.exe,
    as in your case).
    In addition to Cyber_Defend_Team's suggestion, you can also run MalwareBytes from the following link:
    https://www.malwarebytes.org/mwb-download/
    Before deleting the key, be sure to take a backup of the Registry. Refer the link for more information:
    http://support.microsoft.com/kb/322756/en-us
    Balaji Kundalam

  • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\windows\currentversion\run. error's

    HKEYLOCALMACHINE\SOFTWARE\Microsoft\windows\currentversion\run. error's installing itunes and quicktime (both) it say "HKEYLOCALMACHINE\SOFTWARE\Microsoft\windows\currentversion\run. verify you have sufficient access to that key, or contact your support personnel" i do have access to that key i have full access! its been happening for a long time now?

    does any one els have the problem?

  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer\ Missing in Registry

    I was trying to disable autorun on my labtop using the registry but the following registry folder is missing on my system: 
    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer\
    I am running Windows 7 Home Premium x64. Is this normal? 

    As Frederik pointed out, this is perfectly normal. Also, unless you are extremely familiar with creating/editing registry keys, I recommend not making any changes directly to the Registry Keys.
    If you are proficient, then you can create your own registry key so that you can set the user setting you wanted to.
    BUT BE WARNED a bad registry key can seriously damage your computer
    Thank you for the response. I just want to confirm, since I have the Explorer folder in the HKEY_Local_Machine
    folder but not in the HKEY_Current_User folder I shouldn't have to create a new registry key for the Current User folder, Correct?

  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion

    1402
    HKEYLOCALMACHINE\Software\Microsoft\Windows\CurrentVersion\Unistall\Quicktime keeps coming up as an error message and then 1603.
    I have regedit to the 1402 error and when clicking on Quicktime I get this message "Cannot open Quictime, error while opening key", and I get this message by just clickinking on the folder!!! i have given permissions to the cdda folder as suggested on other links and cleared my temp folder and also used windows cleaner in which no Quicktime appears, PLEASE HELP ME!!
    Now all I get is this ERROR 3 Message that everyone else is experiencing

    Hi Umesh
    Going into the Registry and opening up HKEYLOCALMACHINE > SOFTWARE, I can go to the folder for my Local History program, and I can right click on it to look at “Permissions”. This opens a Permissions for Family History window, and if I click on the Advanced button in that window, I go into Advanced Settings for Family History. If I now click on the “Owner” Tab, I can see that the “Current Owner of this item” is Paul(MYCOMPTER\Paul Baines), and this gives me power to grant Full Control to other users of the computer as I see fit. I only looked in this folder for the first time 2 days ago, so the settings are exactly as they were when created by the original program setup.
    Checking on a large and representative number of other program files in the registry, I find that the owner is set to either Paul (MYCOMPUTER\Paul Baines) or Administrators (MYCOMPUTER\Administrators), but when I first attempted to check permissions in QuickTime and iTunes program folders, I had to break the door down to get in. Unfortunately, I am unable to recite the precise sequence, but it went something like this:
    Right click on the file to be greeted with something like “You can’t meddle with settings in here”, Then on a second right click, “Well you can look at Permissions, but you can’t change them”. Then, once I could get to the Advanced tab in Permissions, I could see that the “Current Owner of this item” is “CREATOR” or something like that. I clicked on OK to get back to the Settings window, and then clicked on ADD, and put in “Paul Baines”. I then did another ADD for “Administrators”, just to give me options. I then went back to the “Advanced” and “Owner” windows, clicked on my name in the “Change owner to” part of the window, and clicked on “Apply”. Job done, but is it any wonder that I had such a struggle?
    To sum up: the evidence is that other programs set the registry to acknowledge my existence as Administrator, so why don’t Apple programs. I'm convinced that there must be an issue here.
    Keep trying to get in, and I hope this helps.

  • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Quic

    ahhhh please help HKEYLOCALMACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\QuickTime and when i found it on regedit i tried deleting it but its resricted to me why ?? and how can i delet this

    http://discussions.apple.com/thread.jspa?threadID=688433&tstart=30

  • "Could not open key: HKEY_Local_Machine\SOFTWARE\Microsoft\Windows\CurrentV

    What is the next step for this installation problem? I have no idea what "key" this message is talking about or how to address it. Please help. I can't download the latest iTunes and now I can't use the iTunes store through my old iTunes either.

    Basically I have the same message.
    Could not open key:
    HKEYLOCALMACHINES\Software\Classes\QuickTimePlayerLib.QuickTimePlayerApp\CLSID
    Verify that you hace sufficient access to that key, or contact your support personnel.
    I am the administrator. I have no idea what this is or where it is at. I have tried installing iTunes latest update and uninstalled everything else trying to get this to work. No iTunes now. HELP!!!

  • Exchange BPA Errors (Exchange server is a virtual machine but the additional tools are not installed and The 'Services' string type value located in 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup\Services' registry key is missing)

    Hi,
    I am running BPA on My Exchange 2010 VM (Server 2008 R2 VM on Hyper-V) and get the following errors:
    The 'Services' string type value located in 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup\Services' registry key is missing or inaccessible. The Microsoft Exchange Information Store service won't start. As a result, all services that depend
    on this service won't be able to start
    Exchange server [Exchange Server FQDN] is a virtual machine but the additional tools are not installed. This configuration is not supported. Install Virtual Machine Additions for this guest.
    Problem is that, for the first, that Key exists and the service is actually running fine. And for the second my VM tools are already installed.
    Hopefully someone out there has had the same issue and can assist.
    Pete

    Hi Pete,
    For the first error message, please try the following steps:
    Make sure the Information Store service is in Starting status,
    Automatic startup type and works well, as a test we can try to
    restart the Infroamtion Store service and verify the service works well.
    Start
    Registry Editor, find the registry key “Services” under “HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup”, its value is “C:\Program
    files\Microsoft\Exchange Server\v14”(default install location), please check your registry, make sure the key “Services” exist and value is the Exchange Server install location and the
    location is accessible;
    Start
    Registry Editor, and locate the following registry key:
    HKEY_LOCAL_MACHINE\Software\Microsoft\Exchange\Setup
    Use the
    Permission option under the Security tab to check the permission setting on this key. Make sure
    System is in the list with Full Control permissions if the service account is Local System. If you are not using Local System as the service account, check the existence of the corresponding account in the list and ensure that
    it has Full Control permissions. Please refer to this article:
    Title: Exchange Store Does Not Start: Errors 7024, 1026, 9542, and 5000
    Link:
    http://support.microsoft.com/kb/285116
    Start
    ADSI Edit, and then browse to the following location:
    Domain.com/Configuration/Services/Microsoft Exchange/Org/Administrative Groups/AdminGroup/Servers/Server Name
    Right-click the
    server name, and then click Properties.
    Click the
    Security tab, make sure this own server’s server object have
    full control permission on its own server.
    If not or the object is missing, please modify the permission or click
    Add, locate the computer account for the Exchange Server computer, add it to the Permissions list with full control.
    Click OK, and then close ADSI Edit.
    Use
    Active Directory Users and Computers to add the current affected
    Exchange Server computer account to the Exchange Servers(previous version should be “Exchange Domain Servers”) group in the
    Microsoft Exchange Security Groups( or Users) OU. Refer to this article:
    http://support.microsoft.com/kb/297295.
    Restart the Exchange Server computer, then rerun the ExBPA.
    For the second error message, Microsoft don’t recommend to install Exchange Server on virtual machine without additional tools, so the error message occurs. We can just ignore
    this message, it will not affect the Exchange servers.
    Regards, Eric Zou

  • Someone please post their HKEY_LOCAL_MACHINE\Software\Classes\Local Settings\Software\Microsoft\Windows\CurrentVersion\AppModel\Repository from their registry.

    The title says it all somehow my HKEY_LOCAL_MACHINE\Software\Classes\Local Settings\Software\Microsoft\Windows\CurrentVersion\AppModel\Repository got deleted so i need someone to send me theirs (windows 8 only please!) This has
    caused all apps to be disabled so please HELP. Thanks in advance!

    I fixed it myself.
    You have to create a new user account. Now you might say that this is impossible due to the fact that the "PC Settings" app is disabled, but you can use the command prompt an a workaround. 
    1st step: right-click the bottom left of your screen and select "Command Prompt (Admin)"
    2nd step: type "net user /add NEWUSERNAME NEWPASSWORD" without the quotes and hit enter
    3rd step: if you get the success message type "net user NEWUSERNAME /active on
    Now Logoff and go to your new account and apps should work!
    You might to remove your old account from control panel and user accounts.  There is an option to save the files from your old account to the desktop of your new account.  Hope this helps you.

  • ERROR: Error 1406.Could not write value  to key \SOFTWARE\Microsoft\Windows\CurrentVersion\Run.   Verify that you have sufficient access to that key, or contact your support personnel.

    ERROR: Error 1406.Could not write value  to key \SOFTWARE\Microsoft\Windows\CurrentVersion\Run.   Verify that you have sufficient access to that key, or contact your support personnel.
    ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
    MSI Error message: Error 1406.Could not write value  to key \SOFTWARE\Microsoft\Windows\CurrentVersion\Run.   Verify that you have sufficient access to that key, or contact your support personnel.

    Error 1402 | Error 1406 | Acrobat, Reader
    Error 1603: A fatal error occurred during installation

  • Error 1406. could not write to value Adobe ARM to key \Software\Microsoft\Windows\CurrentVersion\Run

    Had reinstalled Windows 7. Trying out Acrobat and keep getting this error: Error 1406. could not write to value Adobe ARM to key \Software\Microsoft\Windows\CurrentVersion\Run
    tried a few of the discussions and haven't been able to fix it

    Hi richardt4827,
    Please let me know if you have tried out the solutions given in this KB doc link:
    Error 1402 | Error 1406 | Acrobat, Reader
    Hope to hear from you.
    Regards,
    Anubha

  • Hi, i have problem when installing itune. it said:  Could not open key HKEY_LOCAL_MACHINE32\SOFTWARE|Microsoft\Windows\CurrentVersion\Run. Verify that you have sufficient access to that key, or contact your support personnel. please help me!

    hi,
    i have problem when installing itune. it said: 
    Could not open key HKEY_LOCAL_MACHINE32\SOFTWARE|Microsoft\Windows\CurrentVersion\Run. Verify that you have sufficient access to that key, or contact your support personnel.
    Please help me i can't do anything without itune

    For "Could not open key/write value" errors when reinstalling try b noir's user tip:
    "Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\
    [LongStringOfLettersAndNumbers]" error messages when installing iTunes for Windows.
    The technique can be applied to the branch of the registry mentioned in the error message.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

Maybe you are looking for

  • SMS app on iphone

    I am using Skype App to send international SMS. However, it sometimes sent via carrier instead of skype so I got charged expensive fee. Is there any way that I can set on the app only send via skype? Thanks

  • Backing up Tiger for Install of Leopard

    Ok, I've got Leopard and it should be arriving monday. My plan is this: I have a new Seagate Freeagent 500gig external USB hard drive. I want to save a backup of Tiger (Bootable if possible) so that if anything goes wrong with the install I don't hav

  • Dreamweaver file manager

    I connect to my client old ftp server using dreamweaver file manager.  When i connect remotely, i see all the files on the server in the file list. I want to have what is on the server to my local drive. so i click get. But the dreamweaver filemanage

  • Iphoto always crashes when importing pictures

    Hello, I tried several times to install and update iphoto 9 to iphoto 11. I experienced the same problem as many people (corrupted library needing repairs, impossible to import pictures). Of course i had installed the update (9.1). I decided to insta

  • Cannot sell a material in VA01

    In VA01, when I try to enter a plant, system pop up an error: <Material Number XX> is not defined for sales from <Country YY> The document type is OR. Item Cat. is TAN. In OVK1 and OVK4, the relevant tax country and tax category are already defined.