HL Physical Inventory: Control data for storage type  is missing

Dear experts,
When performing an ad-hoc HL inventory in EWM, I'm facing following issue after I try to save the countet inventory document:
This is how my storage type where the inventory will be performed looks like:
What could be a reason for such a behaviour?
Thank you in advance
BR
Denis

Hi Denis, you need to have the parent object in the counted item list. That means it is necessary to count the HU with parent object as Storage Bin and then you can count HU content with the parent object as HU.
When I deleted the parent object I was able to simulate your error:
Brgds,
Petr

Similar Messages

  • Control data for storage type  is missing Message no. L3006

    Dear Mates
    i am trying to create a transfer order from delivery. the moment i click on save in LT03 its giving me the error message as
    Control data for storage type  is missing
    Message no. L3006
    i have explored every thread regarding the same issue and also implemented some measures like
    -> extending the material to particular warehouse and maintaining stock removal and stock placement strategies in it(i created new one from MM01 itself)
    -> going to spro path SPRO->Logistics Execution->shipping->picking->Lean WM->Define storage type. and assigned storage type.
    but still i am getting the same message in LT03
    can you please help me out on this.

    Please take a look at the following links and see if they will help at all.
    Error on creating a TO - Control data for storage type  is missing
    "control data for storage type is missing"
    Kind Regards,
    Jason

  • "control data for storage type is missing"

    Hi Guys
    I am trying to create a goods receipt for an inbound delivery.
    I created the inbound delivery VL31N - sucessfully
    But when trying to create a putaway LT0F - error
    control data for storage type is missing. msg no. L3006
    Do i maiantain this control data for storage type in the Material master?
    is there anything Im doing wrong?
    Can someone help please.
    Thanks in advance for the help.
    Ahmad Yahya

    Hi,
    Check in SPRO > Logistics Execution > Warehouse Management > Master Data > Define storage type, here for your warehouse and storage type check stock placement and stcok removal control is configured.
    Regards,
    Prabu

  • Transfer Order : Data for storage type search is not defined (A   )

    Dear Experts ,
    While trying to use the Transfer Order and trying to determine the storage type this error appears :
    Data for storage type search is not defined (A   )
    Message no. L3007
    Diagnosis
    Information on the storage type search has not been defined.
    How ever , I have already configured the search and here is the Storage Type search's data in OMLY
    1. Warehouse number : W10
    2. Operation : A "Stock Removal"
    3. Indicator :   E
    4. Stock Category : Blank
    5. Special Stock Category : Blank
    6. Storage Location Ref :10
    7. Storage Type : 10E
    Please Advice
    Edited by: Sap Sap on Feb 24, 2011 10:54 AM

    Hello,
    The storage type in which you want to place the material or pick the material from has not been defined in the storage type search sequence.
    You need to define the search sequence in customization so that storage type is determined automatically when the transfer order is created;
    SPRO>>Logistics Execution>>Warehouse Management>>Strategies>>Activate Storage Type Search
    In this go to determine search sequence and then
    for warehouse number W10, operation as stock removal 'A' and in this maintained the relevant the storage type (10E) so that it is determined automatically.
    I hope this helps.
    BR,
    Tushar

  • CONTROL DATA FOR ACTIVITY TYPE NOT MAINTAINED

    dear all
    i get this error when calculating production order cost
    control data for activity type 1000\4230\1420 not maintained for fiscal year 2007
    i hv maintained data in kp26
    can any one pl help. i am learnign sap pp and hv 4.7 version
    thanks and regards

    Dear Anshuman
    my prob. started during cost cal. in prod. order first error was version 0 not maintained for fiscal year 2007, THEN i maintained it in the path as told by you T code OKEQ.
    but after that error changed to CONTROL DATA FOR ACTIVITY TYPE NOT MAINTAINED ( 1000/4230/1420)
    i maintained data in kp26, but the error is still coming
    pl. suggest some solution as i am not able to proceed further.
    Thanks and regards
    Raj

  • Data for storage type search is not defined (E FC1  ) in WM module

    Hi friends,
    I m working in Ware house management.I have created material document and using the matertial document number in LT06.
    I am getting the following error while creating transfer order for material document in T-code LT06.
    Data for storage type search is not defined (E FC1  )
    Message no. L3007
    Diagnosis
    Information on the storage type search has not been defined.
    Procedure
    Contact your system administrator. Note down the values that are within parentheses in the error message.
    Please advise me how to solve this error.
    Thanks in advance.
    Regards,
    William

    SAP does not know where to put the material.
    You usually enable SAP by defining storage type indicators, that you maintain at the putaway and picking indicator fields in material master.
    then you setup the storage type search based on this indicators.
    SAP can then know in which storage type it shall search for a space to store your material.
    As a first step check whether you missed to enter this indicator in your matrial master WM view

  • Multiple physical inventory document active for same material-storage locat

    hi experts,
    I am using transaction code MI31 for creating physical inventory document for all materials at a particular warehouse(storage location). User is selecting direct generation of of PI documents in the transaction. If by mistake he presses execute button more than once system is creating as many copies of physical inventory documents. As per ERP system logic it sound very wrong to have multiple physical inventory document active for same material-storage location ( no batches or special stocks exist ).
    Is there a message number or some standard setting to prevent such occurrence.
    regards
    Avinash

    Hi,
    Syetem won't create again physical inventory document, if allready PI is active for the same part number,  plant, storage location & batch/valuation type.
    Check your PI documnets
    Regrads
    KRK

  • Change in Transfer Order for Storage Type & bin

    Hi,
    I want to change destination bin change during TO Creation. Steps are given below.
    a) SPRO : Storage type setting: Two options are t there in stock placement section
                     Storage bin cannot be changed during confirmation
    1     Storage bin can be changed during confirmation
    I set it to 1.
    b) LT06 : TO Created.
    c) LT12: TO Confirmation: TO lines are coming grayed out. We can not change Destination storage bin, storage type , and section.
    Could you please advice me how to change TO Bins change during confirmation.
    Clients requirement: System will pick bin automatically. Print will be taken for this. Once placement is done & some of material are not kept as per TO Bin number. its a different bin,. Now User want to change bin number during TO Confirmation.
    Thanks ,
    Gupta

    Hi Gupta,
    In WM customizing - master data - storage type - in the detail data of     
    the relevant destination storage type you set the flag                     
    'Dst bin ch. during confirm.' from space to 1. Then the destination        
    storage bin "in general" can be changed at confirmation time.                                                                               
    Additionally you need to setup for the movement types that you are using   
    that you work with the new confirmation list, see detail of the movement   
    types, box screen control. (Try changing this setting to '1').                                                                               
    Please also read in the R/3 library - logistics - logistics execution -    
    warehouse management - warehouse movements - transfer orders - transfer    
    order confirmation - confirming transfer orders.                                                                               
    Here it is described when the destination bin can't be changed even        
    with the correct customizing settings.                                                                               
    If you set the indicator for Destination bin change during confirmation    
    for the desired storage type in Customizing for Warehouse Management       
    under Logistics Execution -> Warehouse Management -> Master Data ->        
    Define Storage Type, you will be able to change the destination bin when   
    confirming a transfer order if, for example, the destination bin           
    proposed by the system is damaged.                                                                               
    NO destination bin can be entered during confirmation for:                                                                               
    - dynamic coordinates                                                     
    - return items                                                            
    - Lean WM (if the destination bin is defined in the movement type)        
    - posting change TOs                                                      
    - inventory based on putaway                                              
    - additions to existing stock in storage units                            
    - transaction Confirm single item                                         
    Please check if your TO is related to one of these cases !!!
    Regards,
    Mauro

  • ID Point for Storage Type V.S. Value in Storage Type Search Table.

    I am trying to perform a GR without PO (MVT 501) for material ABC into Plant 1000, Warehouse number 100, Storage Location 0100.
    During creation of Transport Order, the Destinated Storage Type appeared
    is 011  (ID point for st.ty.010). However, the desired Destinated Storage Type should be 015 (High Rack) instead of 011.
    I have checked the following configuration:
    1. At the SPRO->LE->WM->Master Data->Define Storage Type, the value set for Field: Assigned ID (Identification point) for storage type under the Stock Placement Control = 011 (ID point for st.ty.010).
    2. At the Storage Type Search Strategy, 015 is put as the first Storage Type, followed by Storage Type 001 (high Rack Storage)
    3. And I found out that using LX03 (Bin Status Report) that there is no
    Storage Bin created for the combination of the following
    Plant 1000, WN 100, SLOC 0100, Storage Type 015, Storage Section 001
    Since we do not have any Storage Bin created for Storage Type 015, it will display 011 as the destinated storage type during TO creation.
    My question
    After I have manually created a Storage Bin 03-01-01 for storage type 015, during the TO Creation, system still suggests 011 as Destinated Storage Type instead of the 015 I put in the 1st column of the Storate Type Search.
    I already have the Storage Bin created for Storage Type 015, why the system still fails to pick it but suggests 011 from Assigned ID (Identification point) for storage type.

    Dear Karthik
    You are right, I did activated Indicator: Activate Storage Unit Type Check for Stock Placement in SPRO->LE->WM->Master Data->Define Storage Type
    The Indicator: Storage type with storage unit management was also ticked automatically by system when I selected Indicator: Activate Storaget Unit Type Check for Stock Placement.
    Are you trying to say the ID Port defined in Storage Type will have higher priority over the Storage Type value I maintained in the Storage Type Search Table?
    I have already maintained the Storage Bin and I still do not understand why system still go for ID port. As far as I know, system will suggest the Storage Type from ID Port ONLY if storage bin in this storage type as their destination are not maintained in first in the other setting.
    Quoted from SAP HELP
    Identification point for storage type
    Identification point (storage type) of the current storage type.
    All goods movements that do not have a specific storage bin in this storage type as their destination are first directed to the identification point.
    Here the goods are identified and a transfer order is generated for the actual transfer of the goods into the storage type concerned.
    Please help.
    Edited by: Daimos on Nov 4, 2011 3:25 AM

  • RE: IDOC CONTROL DATA FOR ISU_IDOC_INPUT_ISU_EL40

    HI,
    CAN ANY BODY PLEASE TELL ME CONTROL DATA FOR ISU_IDOC_INPUT_ISU_EL40
    THANKS,
    Sarang

    Hi raj,
    i want to pass data to standard function module which genrates idoc.
    function module name is ISU_IDOC_INPUT_ISU_EL40.
    now i want to pass control data to IDOC_CONTRL parameter.
    my itab consist of 4 fields.
    first field is passed to one segment and remaining fields are passed to other segment.
    So I want to know how to pass data to different segments and what should be the control data(like partner type etc.)
    waiting for ur reply
    Thanks,
    Sarang

  • Use of Vendor and Customer in 'Define Shipping Data for Storage Location"

    Under the stock transfer order configuration, there is a IMG step <b>"Define Shipping Data for Storage Location".</b>
    In this at storage location level, we can assign, sales org/distribution channel, division and VENDOR and CUSTOMER to storage location.
    The customer number is used a sold-to-party in outbound deliveries.
    <b>But I am not able to figure out what's the use of VENDOR number we are specifying in this step.</b>
    If I am assiging the VENDOR Number here to every storage location, then when I am creating cross-company code Stock transport order, which vendor code I will select the one assigned to PLANT or one Assigned to Storage location.
    <b>Also I need to know what vendor account group I will use for creating this storage location vendor.</b>  I have more than one storage locations) under one plant. Soif I used account group as "0007" plant, SAP doesn't allow me to assigne one plant code to 2 vendors and in vendor master on 'additional purchasing data' screen I am not seeing storage location field, it has only 'PLANT' field.
    <b>So I need to know-
    1. Which account group to use for creating storage location vendor
    2. What's the ultimaye use of this vendor code
    3. What vendor # I will use while creating cross-company PO (one for plant or one for storage location.</b>
    Thanks

    Hi,
    Define Shipping Data
    Here in this step you maintain the customer number of the receiving plant. This customer number is used in SD shipping processing to identify the goods recipient (ship-to party) if stock transfer to be carried out with an SD delivery
    A goods receipt can be planned in the receiving plant.
    You can enter a vendor (transport vendor) in the stock transport order
    In IMG step "Define Shipping Data for Storage Location".
    You can assign sales org/distribution channel, division and VENDOR and CUSTOMER to storage location through Plant only.Means this Vendor is created for entering in the STO .This vendor is created for the the Plant (Supplying Plant)so as u can create STO.
    Rewards If usful
    Regards
    Sanjay L

  • Issue loading Meta Data for IDoc Type WPUKSR01 in XI Integration Repository

    Hi,
    I want to load the Meta Data for IDoc Type WPUKSR01 in XI Integration Repository out of BI. Unfortunately, this IDoc is not available in the IDoc List. I checked in BI and the IDoc Type is available in WE60 and WE30. Also, I can load the Meta Data for the Idoc in XI ABAP (IDX2).
    Can someone tell me why the IDoc doesn't show up in XI Integration Repository Import Object List?
    Thanks in advance.
    Best Regards.
    Alex

    Hi Aamir,
    The Idoc is released since Release 30A. I also tried to load the IDoc Meta Data from ERP with the same result: it does not show up in the list.
    Thanks anyway.
    Alex

  • Sorting for  storage type in LM12

    LM12 - change sort display so that alpha storage types with bin info displayed before numeric storage type and bin info.
    The standard LM12 shows sort order for storage type as  numeric storage types first then alpha storage types.
    But User is requesting that alpha storage types are displayed first along with relevant info in alpha order. Standard SAP displays numeric storage type first and then alpha storage types.
    Plz can any one help us to give solution for above  issue.

    Hi VIk,
    SAP help of the customizing node (sPRO > LE > WM > Strategies > Activate Storage type Search):
    If you want the system to search through the entire warehouse number for stock pick, enter "***" (stands for strignent FIFO) as the storage type. The system then will search the entire warehouse for the oldest stock of the material. The entry "+ + +" means that the system branches to the user exit to the stringest FIFO process (MWMT0013).
    Regards,
    Csaba
    Edited by: Csaba Szommer on Jul 27, 2009 8:54 AM

  • Control indicator for PO type

    the field BSAKZ in table EKKO represent the control indicator for PO type.what is control indicator and from which field in the PO,value is stored in BSAKZ

    Hi
    this field (length - 1) takes only two values either (T - transport or R - purchase requisiton for outline agreement)

  • Storage bin for storage type

    Hi ,
    How to maintain storage bin for storage type in WM
    Regards
    RB

    Hi
    Check it in LS01N.
    This will do
    Regards,
    Raman

Maybe you are looking for

  • Weblogic.httpd.defaultWebApp  & weblogic.httpd.webApp. name : PROBLEM!!!

    i have a client that give this error: --------------------------------------------- javax.naming.CommunicationException. Root exception is java.lang.ClassNotFoundException: class com.dat.abs.ejb.GenClassSessionEJBHomeImpl_WLStub previously not found

  • Import tnsnams.ora in SQL developer on Mac OS

    Hi, I am moving from PC to Mac and am installing SQL developer on Mac OS. I want to import tnsnames.ora ( that I used in toad ) to SQL developer. I looked it up and everyone seems to say drop tnsnames.ora to /etc, sql developer will pick it up. Howev

  • Can't find the beatles ringtones

    on the front page of the itunes store it says exclusive beatles ringtones are available, yet when i click on it i'm taken to the beatles albums. there is then a picture there talking about the ringtones but no way to click on that and i don't see the

  • MDM Java API guide

    Do any other guides about MDM Java API exist (except MDM_API_Tutorial and MDM 5.5 SP05 - Java API Migration Guide.pdf) ? Especially MDM Search Java API interesting.

  • I have trouble connecting. Please help.

    I plug my iPod Nano, the second generation into my laptop. It works fine for a couple of months. Then I tried to plug it in this week but my iPod seems to be charging, but I can't edit my songs. Anotherwards, I can't add songs, delete, etc. because m