HL7 message to SAP system

Hi all,
     What are different ways to send HL7 message to SAP system. I am thinking about conversion agent, java proxies, iway adapter. Please help me what are the different advantages and disadvantages and any other techniques.
    Your help is reward able.
Thanks
Deviprasad Pothireddi.

Hi,
Its better u use Conversion Agent,i have done some POC on Conversion Agent,in that HL7 format can be selected it will come with the software defaultly, u can easly convert the HL7 data into XML format.
Regards,
phani
Reward points if Helpful

Similar Messages

  • Sending HL7 Message from ISH system to External System

    Hello Friends,
    I am trying do configure our SAP ISH system to send HL7 messages to External 3rd party system. I did my research on SAP HCM module.
    I am trying to send HL7 message using SAP XI system. Any help on what version of XI is required and SAP ISH is required would be great help to me. If there is any help document on setup required would also be great help to me.
    Thanks for the help.

    Hello Vasu
    What is the format of message your 3rd part system request and on what protocol?
    To my knowledge the Healthcare applications and laboratory information systems require HL7 message format over MLLP protocol.
    If this is your requirement then you should use SAP PI 7.1 EHP or PI 7.3 and request to SAP for IAH Adapter. To know more about IAH and its usage in healthcare integration please refer to my blog at http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a00aabd6-a7f8-2d10-1c9e-bdaf085ab075.
    Good Luck
    Vj

  • How to setup  workplace message in SAP system

    Hi Experts,
    how to setup  workplace message in SAP system.
    when am logon SAP GUI i am getting mesage of Document workplace. ( you have one new document)
    saying that in Inbox i have 1 document.
    my client they dont want Receive that pop up message. thy want receive document but no pop up message .
    where can i do customize thia i hope there was a T-code for this.
    Thank INadvance,
    Anthyodaya.

    Hi,
      Go to transaction SBWP  and Click Distribution list and choose the list where you can find one check box send express. you just deselect the check box and save it. After that you will not receive any express note . but you will get messge to your inbox.
    Regards,
    abi

  • How to do disply logon message on SAP systems

    HI all,
    How to do Display log on message on SAP system.?
    system is SAP r/3 4.6
    what is the procedure?
    is there any transaction code for this?
    Kind Regards
    Jagadish Palagiri

    Hello,
    if you want to display a message test after the user has been authenticated, have a look at transaction SM02.
    Best regards
    Rolf-Martin

  • Handling HL7 messages in SAP EP

    Hi all,
    In our requirement we have to communicate from EP to external system, which follows HL7 standards.
    We found two alternatives these are as follows:
    1.HL7 Iway adapter
    2.SAP conversion agent.
    Is it possible to make our own adapter to convert hl7 to xml?
    If yes,
    What will be the required resources for that?
    Can we handle this approach (without SAP XI) with help java/j2ee?
    Please provide required information (any pdf, conversion tools, and sample code) and also guide us how to handle this scenario. Your help will be great for us.
    Thanx in advance.
    Prashant Krishen &
    Deviprasad.

    Hello,
    Before I answer your question, I want to give you our (SAP) understanding of an HL7 adapter.
    An HL7 adapter shall provide the communication among healthcare applications based on healthcare HL7 standard, this means 1) HL7 message conversion e.g. HL7 message v.2.x format to HL7-XML, and 2) all the required protocols to transport the HL7 messages, e.g. MLLP, TCP/IP.
    The following information which I can give you is based on SAP knowledge on the Netweaver Process Integration (PI/XI) technology.
    So, generally you can do your own HL7 conversion tool. The required resource would be:
    1: Person who has HL7 message structure, you may get available HL7-XML from www.hl7.org,
    2: HL7 transport knowledge which could be learned from www.hl7.org,
    3: Java, J2EE
    All these 3 are required even you don't use SAP PI/XI.
    I can provide you detailed information based on SAP technology and the one from SAP partner. Here are the link:http://service.sap.com/netweaver
    On the left side from there please go to SAP NetWeaver>SAP NetWeaver in Detail>Process Integration>SAP Exchange Infrastructure>SAP XI in Detail>connectivity>Conncetivity SAP Netweaver 7.0 (2004s)/SAP NetWeaver 2004-->
    You will then find details about SAP HL7 options e.g. from iWAY, SAP Conversion Agent powered by Informatica.
    Again, all these are SAP and Partner's technology are on SAP Netweaver PI.
    If you want one without PI, you may also use these 2 options.
    I hope this could help you a little bit.
    Best regards
    Jing

  • Backup message error -SAP system is running or SAP user is connected to dat

    Hello ..
    when the backup started i got this message error ..before starting the backup, the shell shutdown the sap system but below message was showed
    BR0262I Enter database user name[/password]:
    BR0055I Start of database backup: bedvugxg.aff 2010-08-08 05.31.48
    BR0484I BRBACKUP log file: /oracle/AAA/sapbackup/bedvugxg.aff
    BR0477I Oracle pfile /oracle/AAA/102_64/dbs/initAAA.ora created from spfile /oracle/AAA/102_64/dbs/spfileAAA.ora
    BR0068E SAP system is running or SAP user is connected to database AAA - database cannot be shut down
    BR1025I Please shut down SAP system first or use the 'offline_force' option
    BR0056I End of database backup: bedvugxg.aff 2010-08-08 05.31.48
    BR0280I BRBACKUP time stamp: 2010-08-08 05.31.49
    BR0054I BRBACKUP terminated with errors
    [Major] From:  "OMNISAP" Time: 08/08/10 05:31:49
    BRBACKUP /usr/sap/AAA/SYS/exe/run/brbackup -t offline -d util_file -c -m all -u hpbkup/******* returned 3
    i am new on this, what should i review into the db?
    Regards and thanks in advance
    Dma.

    Hello Daniela,
    you try to perform an offline backup (which is a very uncommon way nowadays) and your SAP system is not down.
    This is also described in the official documentation:
    http://help.sap.com/saphelp_sm32/helpdata/en/0d/d309664a0c11d182b80000e829fbfe/content.htm
    offline: Database backup in offline mode, in other words, the database is shut down during backup. When you select this parameter, BRBACKUP checks that no SAP system users are connected to the database. If an SAP System is active, the database is not shut down and BRBACKUP terminates the process with an error message (message number BR0068E).
    Regards
    Stefan

  • How can we get the message from sap system to 3rd party system

    it is related to XI only .if yes u can configure Java proxi-XI-BAPI or call the bapi directly in synchronous mode which can give u return message in BAPIRET.
    can u give the proceser step by step.. plz..
    thanks and regards,
    suresh

    Hi,
    Aout Proxy , you can go thru these-
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a068cf2f-0401-0010-2aa9-f5ae4b2096f9
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d
    http://help.sap.com/saphelp_nw04/helpdata/en/87/5305adc23540b8ac7bce08dbe96bd5/content.htm
    Regards,
    Moorthy

  • Enable WSRM (Web Service Reliable Messaging) in sap system

    Hi All,
    Can any one provide document to enable wsrm in sap pi system.
    your help is much appreciated
    Thanks,
    Narendar.

    Hi,
    Please check below link it will help you.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/107256c4-d4c4-2d10-fca1-d1676081892b?QuickLink=index&…
    Best Regards,
    Atul

  • SAP System Message: Syntx error or generation error in a screen

    dear sap basis gurus,
    i am currently having problems signing on to our DEV server. i get this error message:
    <SID>: SAP System Message
    Syntx error or generation error in a screen.
    it won't let me log on.
    there were no changes made on the server (i.e., profile parameters) lately. it was working really fine after our support package level upgrade about 5 months ago.
    have you encountered this problem before? please help me as there we have two imminent go-lives.
    thank you very much in advance.
    best regards,
    albert

    hello nick, ashok,
    thank you very much for your responses.
    i have already resolved this issue by just freeing up some space from our disks. not one of them was full though.
    i hope i would no longer encounter the error message.
    again, thank you.
    best regards,
    albert

  • Send IDOC from SAP system to IX but can't see any message in SXI_MONITOR

    Hi all,
    I have built up an XI system and configured an IDOC to IDOC scenario between two SAP Systems. After completed all configuration necessary:
    1. Configuration on Source Side (SAP System that send IDOC) and on Target Side (SAP System that receive IDOC) is OK.
    2. SLD is OK: Technical System and Business System are correct for these two SAP System.
    3. Integration Repository: all designed Object is OK.
    4. Integration Directory: all configuration is OK. "Test Configuration" Function is OK.
    5. Runtime WorkBench: is OK. "Test Message"  Function of "Integration Server" is OK.
    In general, it is all OK.
    But when i send an IDOC from SAP System Sour Side (Outbound IDOC from Source Side is OK), on the XI server i can't see any message in Tcode SXI_MONITOR. In this case, my XI server didn't receive any IDOC Message from  this Source Side, and so that my XI server can't process and exchange any IDOC sent from Source Side.
    Anyone can please help me to explain this problem: why my XI server can't receive any IDOC message from SAP System Source Side when all configuration is OK? Do anyone see the same case as this case?
    Thanks a lot for all in advance,
    Best regards,
    Vinh vo

    Hi,
    Possible checks
    At R/3 side
    1) Check in SMQ1 and SM58
    At XI Side
    1) Check in SMQ2 and IDX5
    Check this
    http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/frameset.htm
    Regards
    Seshagiri

  • Unable to send mails to outlook from sap system through workflow

    Hi ,
    Iam unable to send mails to outlook from sap system through work flow .Actually we r able to send mails from sap inbox to outlook successfully.But when trying with workflow we r not able to send.Please guide me that is  there any configurations required from BASIS side for work flow.Actually we configured everything like default domain .
    Please find the errors belows that  traced from sost t code
    02/13/2012     17:50:12     0380 MIME_MESSAGE_GENERATE     G     Error when generating MIME flow
    02/13/2012     17:50:12     0382 MIME_MESSAGE_GENERATE     G     Required 'From' header is initial
    02/13/2012     17:50:12     0167 SO_OBJECT_MIME_GET     G     Error during MIME Generation
    02/13/2012     17:50:12     0777 UPDATE_SOSC     G     Cannot process message in SAP System
    Regards
    RAGHAVENADAR

    Hello,
    Actually i checked the mail ID for WF-BATCH  using su01 .But i didnt find any mail ID for WF-BATCH then i added the email address of the user.Then we tried sending mail it was successfull.
    But later i removed the email address what i entered in WF-BATCH user .Even after removing the email address also iam able to send the mails through workflow.
    So iam confused whether it needs an mail address or not.But now we are able to send a mail to outlook through work flow but not able to send mails to GMAILor yahoo.For that we need to do any settings.
    ABAPer is sending mails through work flow.
    Regards
    RAGHAVENDAR M

  • Couldn't log into SAP System (message 00264) after SAP_BASIS update

    Hello,
    we performed SAP_BASIS update to SAPKB70023 and get a problem with logon into a SAP system with message 00264 (Status &2 of the user interface &1 missing).
    We have a 64-bit non-Unicode system on Solaris/SPARC/Oracle and Kernel level 333.
    We tried to import MENUSYST program from note 1285869, but nothing happened at all. The parameter abap/unicode_check we set to "on" but this didn't help us.
    So after selecting system record in SAP Logon now we get the initial logon screen with no "new password" button and error 00264 (Status 0020 of the user interface SAPMSYST missing.) and couldn't log into the system.
    We have no idea why correct and existing statuses are not working.
    Please suggest us what to do to fix this problem.
    Thanks in advance!

    Check this,
    http://forums.sdn.sap.com/thread.jspa?threadID=835278
    it may be useful.
    Regards,
    Ravi

  • Unable to Log-in *SAP System Message : Error while reading a Dynpro*

    Hi,
    We are facing issues while logging-in through SAP logon 710.
    The system throws an error dialog box with the below message:
    SAP System Message : Error while reading a Dynpro
    At the OS level Java process  server0 is in stop status with exit code -11113. In ABAP WP Table all processes are in wait status.

    Hi Please find the contents of std_server.out below.
    stdout/stderr redirect
    node name   : server0
    pid         : 4124
    system name : KEC
    system nr.  : 01
    started at  : Mon Jul 27 15:44:57 2009
    [Thr 5656] MtxInit: -2 0 0
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    SAP J2EE Engine Version 7.00   PatchLevel 110760.44 is starting...
    Loading: LogManager ... 250 ms.
    Loading: PoolManager ... 0 ms.
    Loading: ApplicationThreadManager ... 47 ms.
    Loading: ThreadManager ... 16 ms.
    Loading: IpVerificationManager ... 0 ms.
    Loading: ClassLoaderManager ... 16 ms.
    Loading: ClusterManager ... 93 ms.
    Loading: LockingManager ... 32 ms.
    Loading: ConfigurationManager ... 1032 ms.
    Loading: LicensingManager ... 0 ms.
    Loading: CacheManager ... 93 ms.
    Loading: ServiceManager ...
    Loading services.:
      Service runtimeinfo started. (16 ms).
      Service cross started. (31 ms).
      Service file started. (31 ms).
      Service memory started. (31 ms).
      Service timeout started. (16 ms).
      Service trex.service started. (32 ms).
      Service userstore started. (0 ms).
      Service jmx_notification started. (15 ms).
      Service p4 started. (62 ms).
      Service classpath_resolver started. (16 ms).
      Service deploy started. (3722 ms).
      Service MigrationService started. (31 ms).
      Service bimmrdeployer started. (0 ms).
      Service log_configurator started. (5177 ms).
      Service locking started. (0 ms).
      Service http started. (126 ms).
      Service naming started. (157 ms).
      Service failover started. (16 ms).
      Service appclient started. (31 ms).
      Service javamail started. (47 ms).
      Service ts started. (47 ms).
      Service jmsconnector started. (47 ms).
      Service licensing started. (15 ms).
      Service connector started. (93 ms).
      Service iiop started. (94 ms).
      Service configuration started. (16 ms).
      Service webservices started. (265 ms).
      Service dbpool started. (1204 ms).
      Service UT started. (0 ms).
    Jul 27, 2009 3:45:09 PM         com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_54] Fatal: Initialization of ABAP data source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: "     Error while reading a dynpro                                        ". This message is critical if it appears during the startup of the AS Java.
    Jul 27, 2009 3:45:09 PM  ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_54] Fatal:
      service com.sap.security.core.ume.service ================= ERROR =================
    Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
    com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro                                       
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
         at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
    Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro                                       
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
         at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
         ... 6 more
    com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro                                       
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
         at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
    Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro                                       
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
         at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
         ... 6 more
    [Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
    Jul 27, 2009 3:45:09 PM             com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_54] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.

  • File to RFC - error while processing message to remote system:com.sap.aii.

    Hi
    i m working on File to RFC scenario. the records are getting displayed in sender CC and receiver CC. But in receiver CC i m also getting the following error:
    Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE:      Screen output without connection to user.    
    Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE:      Screen output without connection to user.   
    It was working fine few hours earlier but showing this error now. i was giving a SUBMIT program , but stopped that now.
    But still facing the same problem. and in SXMB_MONI its showing recorded for Outbound processing.
    could anyone help.

    Hi
    I am Facing  Following Error When I am trying to call SAP Screen through JCO.jar
    com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user
    Please Guide Whethere it is possible to call SAP screen Through JCO.jar  ot NOT
    Please HELP if it is possible to Call SAP screen through JCO.jar with step and Code
    Thanks
    Vivek

  • ERROR MESSAGE sap system manager:work process restarted, session terminated

    Hi,
    i am a beginer in SAP administration, users are getting this error message and i have done all my research and not able to resolve this issue. Here are the details
    SAP Version :ideas 4.7
    Database :Oracle
    OS : windows 2003
    Module user is working on MM
    user working on it is a Super user with all the permissions
    SAP is configure to run under the  European date and decimal format.
    I have never done any database administration on it, it is a new install and has been rarely used.
    User creates a RFQ and when he tries saving it , seems like for the first time after either restarting the macine or restarting the service it might work and at time it might not, this is a very sporadic error and most of the times it crashes out with the message "sap system manager:work process restarted, session terminated" and kicks the user out of the session.
    Below are the details of the error message from ST22 :
    name of the runtime error : system_core_dumped
    below are the details of the error message and its resoltion as suggested by sap help :
    ========
    Runtime Errors         SYSTEM_CORE_DUMPED           
           Occurred on     01.02.2008 at 07:52:19
    Process terminated by signal " ".                                             
    What happened?
    The current ABAP program had to be terminated because the                     
    ABAP processor detected an internal system error.                             
    The current ABAP program "SAPLCLSC" had to be terminated because the ABAP     
    processor discovered an invalid system state.                                 
    What can you do?
                                                                                    Make a note of the actions and input which caused the error.                                                                               
    To resolve the problem, contact your SAP system administrator.                                                                               
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer      
    termination messages, especially those beyond their normal deletion           
    date.                                                                               
    Error analysis
    An SAP System process was terminated by an operating system signal.           
                                                                                    Possible reasons for this are:                                                
    1. Internal SAP System error.                                                 
    2. Process was terminated externally (by the system administrator).           
               Last error logged in SAP kernel                                    
                                                                                    Component............ "Taskhandler"                                           
    Place................ "SAP-Server server1_DEV_00 on host server1 (wp 1)"      
    Version.............. 1                                                       
    Error code........... 11                                                      
    Error text........... "ThSigHandler: signal"                                  
    Description.......... " "                                                     
    System call.......... " "                                                     
    Module............... "thxxhead.c"                                            
    Line................. 9555                                                                               
    How to correct the error
    The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often             
    contains a file called 'core'.                                                                               
    Save this file under another name.                                                                               
    If you cannot solve the problem yourself, please send the                     
    following documents to SAP:                                                                               
    1. A hard copy print describing the problem.                                  
       To obtain this, select the "Print" function on the current screen.         
                                                                                    2. A suitable hardcopy prinout of the system log.                             
       To obtain this, call the system log with Transaction SM21                  
       and select the "Print" function to print out the relevant                  
       part.                                                                               
    3. If the programs are your own programs or modified SAP programs,            
       supply the source code.                                                    
       To do this, you can either use the "PRINT" command in the editor or        
       print the programs using the report RSINCL00.                                                                               
    4. Details regarding the conditions under which the error occurred            
       or which actions and input led to the error.                                                                               
    System environment
    SAP Release.............. " "                                                                               
    Application server....... " "                                                 
    Network address.......... " "                                                 
    Operating system......... " "                                                 
    Release.................. " "                                                 
    Hardware type............ " "                                                 
    Character length......... " " Bits                                            
    Pointer length........... " " Bits                                            
    Work process number...... " "                                                 
    Short dump setting....... " "                                                                               
    Database server.......... " "                                                 
    Database type............ " "                                                 
    Database name............ " "                                                 
    Database owner........... " "                                                                               
    Character set............ " "                                                                               
    SAP kernel............... " "                                                 
    Created on............... " "                                                 
    Created in............... " "                                                 
    Database version......... " "                                                                               
    Patch level.............. " "                                                 
    Patch text............... " "                                                                               
    Supported environment....                                                     
    Database................. " "                                                 
    SAP database version..... " "                                                 
    Operating system......... " "                                                 
    User, transaction...
    Client.............. " "                                                      
    User................ " "                                                      
    Language key........ " "                                                      
    Transaction......... "ME41 "                                                  
    Program............. "SAPLCLSC"                                               
    Screen.............. "SAPMM06E 0320"                                          
    Screen line......... 71                                                       
    Information on where termination occurred
    The termination occurred in the ABAP program "SAPLCLSC" in "EXECUTE_SELECT".  
    The main program was "SAPMM06E ".                                                                               
    The termination occurred in line 131 of the source code of the (Include)      
    program "LCLSCF2G"                                                           
    of the source code of program "LCLSCF2G" (when calling the editor 1310).      
    =============
    i even tried increasing the dialog processes but with no use.The same error occurs.
    I appreciate every one of help i can get, i am working on a deadline which is tomorrow evening to resovle this issue, any kind of help is highly appreciated.
    thanks
    mudessir.

    Hi
       follow correction method suggested in this dump,
    " The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
    contains a file called 'core'.  Save this file under another name."
    have you done this?
    with regards,
    raj.
    <i>pls, award points</i>

Maybe you are looking for