Hlep required for setup of playbook

plz plz plz some body help me in compliting my intial setup of my new pplay book i cant go further than id agreement i m trying to select country and language but its not saving

Maker sure you have a Wi-Fi connection available, without a proper connection you won't be able to continue with setup. Also, it may sound silly but don't forget you have to use the swipe gesture in order to move onto the next page.
"Lost in space in search of a cosmic gate"
Momo

Similar Messages

Installing Windows 7 RC on T400 -- drivers required for setup

When Windows 7 RC was released, I immediately installed it with no issues.
I have since returned to Vista as there was a lack of W7 drivers initially.
Now that this has been overcome with Lenovo releasing beta drivers, I tried installing it again this week to no avail. W7 setup points me to install a driver after choosing "Install now" at the first screen. I have attempted to install the Intel SATA driver but it still says the driver is incorrect.
This has never occurred to me before -- whether installing Vista or Win 7 beta 1 or Win 7 RC. I have attempted to install from DVD, USB HDD and USB thumb drive. All three media have returned this same error message which I cannot get through. Anyone else experience these difficulties?

Finally managed to resolve this problem by re-downloaded Windows 7 RC DVD ISO.
To spot whether the problem is going to apply to you, when booting to Windows 7 RC setup, check whether the "progress bar" is the Vista green scrolling nub or Windows 7 "Starting Windows" flower. If the former, then the installation source is broken. Re-downloading and copying to whatever medium you're installing from (USB thumb drive, USB HDD, DVD) would solve the problem.

STEP BY STEP Configuration require for setup SLD Connections

hi I have installed the sneak preview 7.0 netweaver.
I would like to set up the SLD connection for R/3 system.
kindly provide the step by step configurations requied to set upd the SLd connection to R/3 server
Regards
Vijay

Hi,
Refer to this document - [SLD Configuration guide for SAP NW7.0|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50924080-0627-2a10-2b89-8cb87b972fb1]
For more info on SLD refer to this link - [SLD|System Landscape Directory (SLD)]
Regards
Srikanth KV

Resource Requirement for a global zone

Hi All,
We are going to deploy Solaris container in our environment. However, we hope know if there any guideline for the resource requirement for setup the global zone. In other words, what are the min cpu / memory should be set assigned to the global zone?
Thanks in advance.
Regards

You don't need to worry about defending the global zone. The design of the pool_default pool includes safeguards that prevent starvation by other pools. The most obvious is the zone strategy itself; there's no way to allocate all the physical memory to a zone before the kernel itself has pinned down what it needs.
I think it would make better sense to allocate some (large) percentage of memory to the Oracle container and adjust as needed, rather than try and lock every bit of it. Maybe 14 GB and see how that works. I can think of any number of annoyances you might encounter by trying to lock down more memory than is actually available.

List of Manual Setup required for iSetup to work

Hi All,
This is Mugunthan from iSetup development. Based on my interaction with customers and Oracle functional experts, I had documented list of manual setups that are required for smooth loading of selection sets. I am sharing the same. Please let me know if I anyone had to enter some manual setup while using iSetup.
Understanding iSetup
iSetup is a tool to migrate and report on your configuration data. Various engineering teams from Oracle develop the APIs/Programs, which migrates the data across EBS instances. Hence all your data is validated for all business cases and data consistency is guarantied. It requires good amount of setup functional knowledge and bit of technical knowledge to use this tool.
Prerequisite setup for Instance Mapping to work
·     ATG patch set level should be same across all EBS instances.
·     Copy DBC files of each other EBS instances participating in migration under $FND_SECURE directory (refer note below for details).
·     Edit sqlnet.ora to allow connection between DB instacnes(tcp.invited_nodes=(<source>,<central>))
·     Make sure that same user name with iSetup responsibility exists in all EBS instances participating in migration.
Note:- iSetup tool is capable of connecting to multiple EBS instances. To do so, it uses dbc file information available under $FND_SECURE directory. Let us consider three instances A, B & C, where A is central instance, B is source instance and C is target instances. After copying the dbc file on all nodes, $FND_SECURE directory would look like this on each machine.
A => A.dbc, B.dbc, C.dbc
B => A.dbc, B.dbc
C => A.dbc, C.dbc
Prerequisite for registering Interface and creating Custom Selection Set
iSetup super role is mandatory to register and create custom selection set. It is not sufficient if you register API on central/source instance alone. You must register the API on all instances participating in migration/reporting.
Understanding how to access/share extracts across instances
Sharing iSetup artifacts
·     Only the exact same user can access extracts, transforms, or reports across different instances.
·     The “Download” capability offers a way to share extracts, transforms, and loads.
Implications for Extract/Load Management
·     Option 1: Same owner across all instances
·     Option 2: Same owner in Dev, Test, UAT, etc – but not Production
o     Extract/Load operations in non-Production instances
o     Once thoroughly tested and ready to load into Production, download to desktop and upload into Production
·     Option 3: Download and upload into each instance
Security Considerations
·     iSetup does not use SSH to connect between instances. It uses Concurrent Manager framework to lunch concurrent programs on source and target instances.
·     iSetup does not write password to any files or tables.
·     It uses JDBC connectivity obtained through standard AOL security layer
Common Incorrect Setups
·     Failure to complete/verify all of the steps in “Mapping instances”
·     DBC file should be copied again if EBS instance has been refreshed or autoconfig is run.
·     Custom interfaces should be registered in all EBS instances. Registering it on Central/Source is not sufficient.
·     Standard Concurrent Manager should up for picking up iSetup concurrent requests.
·     iSetup financial and SCM modules are supported from 12.0.4 onwards.
·     iSetup is not certified on RAC. However, you may still work with iSetup if you could copy the DBC file on all nodes with the same name as it had been registered through Instance Mapping screen.
Installed Languages
iSetup has limitations where it cannot Load or Report if the number and type of installed languages and DB Charset are different between Central, Source and Target instances. If your case is so, there is a workaround. Download the extract zip file to desktop and unzip it. Edit AZ_Prevalidator_1.xml to match your target instance language and DB Charset. Zip it back and upload to iSetup repository. Now, you would be able to load to target instance. You must ensure that this would not corrupt data in DB. This is considered as customization and any data issue coming out this modification is not supported.
Custom Applications
Application data is the prerequisite for the most of the Application Object Library setups such as Menus, Responsibility, and Concurrent programs. iSetup does not migrate Custom Applications as of now. So, if you have created any custom application on source instance, please manually create them on the target instance before moving Application Object Library (AOL) data.
General Foundation Selection Set
Setup objects in General foundation selection set supports filtering i.e. ability to extract specific setups. Since most of the AOL setup data such as Menus, Responsibilities and Request Groups are shipped by Oracle itself, it does not make sense to migrate all of them to target instance since they would be available on target instance. Hence, it is strongly recommended to extract only those setup objects, which are edited/added, by you to target instance. This improves the performance. iSetup uses FNDLOAD (seed data loader) to migrate most of the AOL Setups. The default behavior of FNDLOAD is given below.
Case 1 – Shipped by Oracle (Seed Data)
FNDLOAD checks last_update_date and last_updated_by columns to update a record. If it is shipped by Oracle, the default owner of the record would be Oracle and it would skip these records, which are identical. So, it won’t change last_update_by or last_updated_date columns.
Case 2 – Shipped by Oracle and customized by you
If a record were customized in source instance, then it would update the record based on last_update_date column. If the last_update_date in the target were more recent, then FNDLOAD would not update the record. So, it won’t change last_update_by column. Otherwise, it would update the records with user who customized the records in source instance.
Case 3 – Created and maintained by customers
If a record were newly added/edited in source instance by you, then it would update the record based on last_update_date column. If the last_update_date of the record in the target were more recent, then FNDLOAD would not update the record. So, it won’t change last_update_by column. Otherwise, it would update the records with user who customized the records in source instance.
Profiles
HR: Business Group => Set the name of the Business Group for which you would like to extract data from source instance. After loading Business Group onto the target instance, make sure that this profile option is set appropriately.
HR: Security Profile => Set the name of the Business Group for which you would like to extract data from source instance. After loading Business Group onto the target instance, make sure that this profile option is set appropriately.
MO: Operating Unit => Set the Operating Unit name for which you would like to extract data from source instance. After loading Operating Unit onto the target instance, make sure that this profile option is set if required.
Navigation path to do the above setup:
System Administrator -> Profile -> System.
Query for the above profiles and set the values accordingly.
Descriptive & Key Flex Fields
You must compile and freeze the flex field values before extracting using iSetup.
Otherwise, it would result in partial migration of data. Please verify that all the data been extracted by reporting on your extract before loading to ensure data consistency.
You can load the KFF/DFF data to target instance even the structures in both source as well as target instances are different only in the below cases.
Case 1:
Source => Loc1 (Mandate), Loc2 (Mandate), Loc3, and Loc4
Target=> Loc1, Loc2, Loc3 (Mandate), Loc4, Loc5 and Loc6
If you provide values for Loc1 (Mandate), Loc2 (Mandate), Loc3, Loc4, then locations will be loaded to target instance without any issue. If you do not provide value for Loc3, then API will fail, as Loc3 is a mandatory field.
Case 2:
Source => Loc1 (Mandate), Loc2 (Mandate), Loc3, and Loc4
Target=> Loc1 (Mandate), Loc2
If you provide values for Loc1 (Mandate), Loc2 (Mandate), Loc3 and Loc4 and load data to target instance, API will fail as Loc3 and Loc4 are not there in target instance.
It is always recommended that KFF/DFF structure should be same for both source as well as target instances.
Concurrent Programs and Request Groups
Concurrent program API migrates the program definition(Definition + Parameters + Executable) only. It does not migrate physical executable files under APPL_TOP. Please use custom solution to migrate executable files. Load Concurrent Programs prior to loading Request Groups. Otherwise, associated concurrent program meta-data will not be moved even through the Request Group extract contains associated Concurrent Program definition.
Locations - Geographies
If you have any custom Geographies, iSetup does not have any API to migrate this setup. Enter them manually before loading Locations API.
Currencies Types
iSetup does not have API to migrate Currency types. Enter them manually on target instance after loading Currency API.
GL Fiscal Super user--> setup--> Currencies --> rates -- > types
Associating an Employee details to an User
The extract process does not capture employee details associated with users. So, after loading the employee data successfully on the target instance, you have to configure them again on target instance.
Accounting Setup
Make sure that all Accounting Setups that you wish to migrate are in status “Complete”. In progress or not-completed Accounting Setups would not be migrated successfully.
Note: Currently iSetup does not migrate Sub-Ledger Accounting methods (SLA). Oracle supports some default SLA methods such as Standard Accrual and Standard Cash. You may make use of these two. If you want to use your own SLA method then you need to manually create it on target instances because iSetup does not have API to migrate SLA. If a Primary Ledger associated with Secondary Ledgers using different Chart of Accounts, then mapping rules should be defined in the target instance manually. Mapping rule name should match with XML tag “SlCoaMappingName”. After that you would be able to load Accounting Setup to target instance.
Organization API - Product Foundation Selection Set
All Organizations which are defined in HR module will be extracted by this API. This API will not extract Inventory Organization, Business Group. To migrate Inventory Organization, you have to use Inventory Organization API under Discrete Mfg. and Distribution Selection Set. To extract Business Group, you should use Business Group API.
Inventory Organization API - Discrete Mfg & Distribution Selection Set
Inventory Organization API will extract Inventory Organization information only. You should use Inventory Parameters API to move parameters such as Accounting Information. Inventory Organization API Supports Update which means that you can update existing header level attributes of Inventory Organization on the target instance. Inventory Parameters API does not support update. To update Inventory Parameters, use Inventory Parameters Update API.
We have a known issue where Inventory Organization API migrates non process enabled organization only. If your inventory organization is process enabled, then you can migrate them by a simple workaround. Download the extract zip file to desktop and unzip it. Navigate to Organization XML and edit the XML tag <ProcessEnabledFlag>Y</ProcessEnabledFlag> to <ProcessEnabledFlag>N</ProcessEnabledFlag>. Zip it back the extract and upload to target instance. You can load the extract now. After successful completion of load, you can manually enable the flag through Form UI. We are working on this issue and update you once patch is released to metalink.
Freight Carriers API - Product Foundation Selection Set
Freight Carriers API in Product Foundation selection set requires Inventory Organization and Organization Parameters as prerequisite setup. These two APIs are available under Discrete Mfg. and Distribution Selection Set. Also,Freight Carriers API is available under Discrete Mfg and Distribution Selection Set with name Carriers, Methods, Carrier-ModeServ,Carrier-Org. So, use Discrete Mfg selection set to load Freight Carriers. In next rollup release Freight Carriers API would be removed from Product Foundation Selection Set.
Organization Structure Selection Set
It is highly recommended to set filter and extract and load data related to one Business Group at a time. For example, setup objects such as Locations, Legal Entities,Operating Units,Organizations and Organization Structure Versions support filter by Business Group. So, set the filter for a specific Business Group and then extract and load the data to target instance.
List of mandatory iSetup Fwk patches*
8352532:R12.AZ.A - 1OFF:12.0.6: Ignore invalid Java identifier or Unicode identifier characters from the extracted data
8424285:R12.AZ.A - 1OFF:12.0.6:Framework Support to validate records from details to master during load
7608712:R12.AZ.A - 1OFF:12.0.4:ISETUP DOES NOT MIGRATE SYSTEM PROFILE VALUES
List of mandatory API/functional patches*
8441573:R12.FND.A - 1OFF:12.0.4: FNDLOAD DOWNLOAD COMMAND IS INSERTING EXTRA SPACE AFTER A NEWLINE CHARACTER
7413966:R12.PER.A - MIGRATION ISSUES
8445446:R12.GL.A - Consolidated Patch for iSetup Fixes
7502698:R12.GL.A - Not able to Load Accounting Setup API Data to target instance.
Appendix_
How to read logs
·     Logs are very important to diagnose and troubleshoot iSetup issues. Logs contain both functional and technical errors.
·     To find the log, navigate to View Detail screens of Extracts/ Transforms/Loads/Standard/Comparison Reports and click on View Log button to view the log.
·     Generic Loader (FNDLOAD or Seed data loader) logs are not printed as a part of main log. To view actual log, you have to take the request_id specified in the concurrent log and search for the same in Forms Request Search Window in the instance where the request was launched.
·     Functional errors are mainly due to
o     Missing prerequisite data – You did not load one more perquisite API before loading the current API. Example, trying to load “Accounting Setup” without loading “Chart of Accounts” would result in this kind of error.
o     Business validation failure – Setup is incorrect as per business rule. Example, Start data cannot be greater than end date.
o     API does not support Update Records – If the there is a matching record in the target instance and If the API does not support update, then you would get this kind of errors.
o     You unselected Update Records while launching load - If the there is a matching record in the target instance and If you do not select Update Records, then you would get this kind of errors.
Example – business validation failure
o     VONAME = Branches PLSQL; KEY = BANKNAME = 'AIBC‘
o     BRANCHNAME = 'AIBC'
o     EXCEPTION = Please provide a unique combination of bank number, bank branch number, and country combination. The 020, 26042, KA combination already exists.
Example – business validation failure
o     Tokens: VONAME = Banks PLSQL
o     BANKNAME = 'OLD_ROYAL BANK OF MY INDIA'
o     EXCEPTION = End date cannot be earlier than the start date
Example – missing prerequisite data.
o     VONAME = Operating Unit; KEY = Name = 'CAN OU'
o     Group Name = 'Setup Business Group'
o     ; EXCEPTION = Message not found. Application: PER, Message Name: HR_ORG_SOB_NOT_FOUND (Set of books not found for ‘Setup Business Group’)
Example – technical or fwk error
o     OAException: System Error: Procedure at Step 40
o     Cause: The procedure has created an error at Step 40.
o     Action: Contact your system administrator quoting the procedure and Step 40.
Example – technical or fwk error
o     Number of installed languages on source and target does not match.
Edited by: Mugunthan on Apr 24, 2009 2:45 PM
Edited by: Mugunthan on Apr 29, 2009 10:31 AM
Edited by: Mugunthan on Apr 30, 2009 10:15 AM
Edited by: Mugunthan on Apr 30, 2009 1:22 PM
Edited by: Mugunthan on Apr 30, 2009 1:28 PM
Edited by: Mugunthan on May 13, 2009 1:01 PM

Mugunthan
Yes we have applied 11i.AZ.H.2. I am getting several errors still that we trying to resolve
One of them is
===========>>>
Uploading snapshot to central instance failed, with 3 different messages
Error: An invalid status '-1' was passed to fnd_concurrent.set_completion_status. The valid statuses are: 'NORMAL', 'WARNING', 'ERROR'FND     at oracle.apps.az.r12.util.XmlTransmorpher.<init>(XmlTransmorpher.java:301)
     at oracle.apps.az.r12.extractor.cpserver.APIExtractor.insertGenericSelectionSet(APIExtractor.java:231)
please assist.
regards
girish

HT1926 when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?

when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?

Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR,

What are the versions required for JBOSS,JDK and ORACLE to setup the ATG 10.2.

Hi Folks,
Could you please share, What are the versions required for JBOSS, JDK and ORACLE to setup the ATG 10.2.
Thank you.

In case you don't have access to MOS :
JBOSS : 5.1.2 EAP
JDK : 1.6.0_38
ORACLE :
Oracle Exadata5
Oracle 10gR2 (10.2.0.3)
Oracle 10gR2 RAC (10.2.0.3)
Oracle 11gR2 (11.2.0.2.0)
Oracle 11gR2 RAC (11.2.0.2.0)

Setup Requirement for BIS(FI)Implementation

Hi
I am trying to implement FI in a new Test instance that has absolutely no data. How much hazard does this fact have to the creation of business views and imports of biseul.eex?
1.Should i have to necessarily setup oracle financials,general ledger etc BEFORE proceeding with FI implementation?
2. Should i also ensure that data exists in the Financials modules before setup of FI?
3.Can I (atleast)perform the Discoverer post installation steps before these modules are set up completely? Isnt the biseul file only a default one that creates the default business views required for standard FI reports?
4. However when i tried to import the biseul command i get a series of messages or warnings(like:Could not locate the Folder with display name 'Balance Values' in the target End User Layer), but the import was succesful. Can i proceed or have my GL setup complete first?
regds,
Sheena.

Hi,
Create datasources using KEB0 tcode by taking operating concerns(S_GO, S_CP & customized ). COPA datasources are delta enabled.
Pls Check this docs.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
COPA Extractions - Steps to follow!
Copa extraction
what is the difference between copa and other extraction
Regards.
CSM Reddy

Im having a problem updating my itunes. Im able to download the setup but it keeps on giving this message: there is a problem with this windows installer package. a program required for this install this to complete could not be run. can anyone help?

Im having a problem updating my itunes. Im able to download the setup but it keeps on giving this message: there is a problem with this windows installer package. a program required for this install this to complete could not be run. can anyone help?

Im able to download the setup but it keeps on giving this message: there is a problem with this windows installer package. a program required for this install this to complete could not be run
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

Authorizations Required for Accessing WAD and setup an Active RFC

Hi All,
I an having problems for accessing WAD. It says 'You are not authorised to run WAD'. Does any one have idea of what authorizations are required to access WAD. I need to do the set up for information Broadcasting.
Also some help is need for setting up an active RFC server. Can any one specify what attributes are required to setup an active RFC Server.

Hi,
will you be able to provide more specific information.... regarding it........
I need the information as I need to Broadcast a web template...

Hardware required for RAC setup at home

Hi All,
Could you please suggest the Hardware required for practicing RAC at home.
Regards,
VN

Hi, "user7202581",
For practicing purposes, you could consider a VBox / OVM based setup at home. We have used those for Hands On Labs in the course of Oracle Open World more than once. I recommend you use a machine with at least 8GB memory and dual core (HT enabled) processors. Some configuration examples: Lenovo Laptop, ThinkPad, 8GB, 320GB HDD, i5 dual core, 2.5 GHz, Win 7 or a Mac Mini, latest version, i5 dual core, 2.3GHz and 8GB memory would do the trick for a two node cluster. Note that I mention the hosting OS in case you use VBox. For OVM based setups you either have to use a dual boot system or use a dedicated machine. You will be somewhat restricted with respect to the hardware failures you can impose on this system obviously (due to the VM setup), but for practicing purposes, you should find those environments sufficient, I think. Also see: RAC on OVM templates: http://www.oracle.com/technetwork/server-storage/vm/rac-template-11grel2-166623.html
Hope that helps. Thanks,
Markus

Minimum requirements for OEM 12c setup in VMware

All,
I am planning to setup OEM 12c Grid in my personal laptop vmware workstation for practice purpose.
Can anybody list me the minimum requirements for the OEM 12c setup i.e. min RAM size required, swap space, disk space etc..
Thanks in advance,
Mahipal

Aman.... wrote:
It took a minute over Google to get this,
http://www.oracle.com/technetwork/oem/framework-infra/em12c-sizing-1590739.pdf
Aman....Ha, I beat you with 48 seconds !!!
LoL
Edit: http://docs.oracle.com/cd/E24628_01/install.121/e22624.pdf

What are the setup requirements for QTP to recognize objects in Macro Media Flash?

What are the setup requirements for QTP to recognize objects in Macro Media Flash? I have already installed Flex plug-in 4.6 in QTP 11 but QTP still could reconize any objects in the application.

Over_Nyquest
Have you enabled the Remote Panel Server in the Web Server options on the server?
Kyle B | Product Support Engineer | ni.com/support

Hardware requirements for Fusion Applications Setup

Hi,
I want to provision Oracle Fusion Applications CRM domain as a reference implementation to understand the CRM functionality and for other R&D purposes.
For such an implementation with no high traffic, no load balancing/high availability and just setting up just an FA CRM product offering-- Please help me in understanding the minimum hardware requirements for provisioning this set up.
(Raising this thread in this forum in reference to few other FA threads being addressed in this forum.
Please suggest me the most appropriate forum if this is not the right place)
Thanks,
Srikanth.

Hi!
I hope all the things are ok with you, well i have a trouble, i'm installing Oracle Applications 11i (Oracle DB 10g) on RHEL4, i have all the requirements to install and i followed the steps to install on
the manual r115102ins-1, i begin the installation with the displays screen but one of this check progress bars (Monitor Installation Progress), during the installation, Rapid Install displays a main progress bar and an individual progress bar.
When i enter the correct path for Oracle Applications Rapid Install -RDBMS Disk3, the porcentage stops in 86% and not go on, why? Is there a solution?
Is there anyone for help me!!
Best Regards!!

Questions on SETSPN syntax and what is required for MANUAL AD auth

I'll preface this by stating that I don't need to do all the extra stuff for Vintela SSO, SSO to database, etc. I just need to know precisely what is necessary to do to get AD authentication working. I managed to get it working in XIr2 previously but it's been so long and I'm not 100% sure that everything I wound up doing was absolutely necessary that I wanted to sort it out for good as we look at going to XI 3.1 SP3.
In the XI 3.1 SP3 admin guide, page 503, the SETSPN command which is
used as part of the setup process to establish a service account to
enable AD authentication is outlined as follows:
SETSPN.exe -A <ServiceClass>/<DomainName> <Serviceaccount>
The guide suggests that the <ServiceClass> can be anything you want to
arbitrarily assign. If I choose something other than the
suggested "BOBJCentralMS" value, is there anywhere else I have to
specify this value to allow the service account to function properly?
The guide suggests that the <DomainName> should be the domain name on
which the service account exists however I've seen many posts online which seem to
indicate this <DomainName> should actually be the FQDN of the server
running the CMS service instead of the general domain name.
Clarification there would be very helpful if anyone has some insight.

The CMS account can have an SPN of spaghetti/meatballs, there are no requirements (cept 2 characters on each side of the / I believe). The SPN created should be the value entered in the CMC > Authentication > Windows AD
The account must run the SIA and it therefore must have AD permissions. Now if you are using IIs or client tools you don't even need an SPN. The SPN is for kerberos only which is required for java app servers.
The vintela SSO white paper in the this forums sticky post explains the roles of a service account.
Regards,
Tim

Hlep required for setup of playbook

Similar Messages

Maybe you are looking for