HMMM...NOT SURE

there was no misc. catagory, so i'll ask here. two of my friends say that they have seen 30" iMacs, not the 30 inch display hooked up to a comp., but an actual 30" in iMac...i told them there is no such thing, but who's right...please don't delete this, i'm not speculating about future products, just being curious

that's what i thought...i know about all Macs, so it sounded suspicious...thanks

Similar Messages

  • Macbook purchased in June acting possessed, not sure what else I can do.

    SPECS:  MacBook Pro, 2.5GHz Intel Core i5  4gb 1600MHx DDR3 RAM, 500gb HDD running OS X 10.9.4
    Okay, so my family purchased me a new MacBook back in June, after my other one died after nearly 5 years. Right out of the box I had problems with it. When I first booted it up, it froze and crashed. After I finally was able to reboot it and get it up and running, it was extremely slow and would constantly freeze. I immediately contacted Apple Support. Unfortunately, I was stuck home after knee surgery and couldn't get it to the store, so they remotely checked my computer out and deemed it was "fine". Okay. They informed me about the warranty, yadda yadda.
    So the problems continued, I re-contacted them and they instructed me to take it in for service as soon as I could. I had to wait a bit for my knee to heal up before I could get myself over to the mall. I went, they ran some tests and also declared everything was fine. By this point, my computer was routinely crashing, failing to start up properly, and started just doing.. strange things. They recommended I back all my photos up to an external HD (which I did), bring it back another time and have them completely wipe and reset it. Did that about 3-4 weeks ago.
    I've essentially left everything alone besides putting some of my photos back on from the external HD. Not long after they reset it, it's back to doing all sorts of crazy things. I haven't even been able to use this thing besides being a thousand dollar Facebook and email machine.... try and do anything else and it crashes or freezes. I can't even use iPhoto to edit photos because it immediately locks up and I sit there for 5 minutes per photo watching the dang pinwheel go round and round. Now the computer overheats and the mousepad has become possessed. I've started recording some of the bizarre things it does, and showed them at the Apple store and just get a "hmmm..." from them... I can be sitting here watching Netflix and besides barely loading half the time, the mouse just spazzes out and goes all over the screen clicking on things. Trying to type this out is already a nightmare because the mouse just shoots all over the place, clicks on things, highlights things, erases things and goes over to the other dashboard screen... so I'm constantly having to sit here clicking ESC to come back to where I was. The brightness will change from time to time too, and the plugging in/unpluging the power adapter instantly sends the computer into a frenzy (yes, I am using the charger that came with the computer, and it is plugged into a surge protector). When I try to regain control of the mouse, it still shoots all over the place and clicks on things.
    I don't know what to do. I've deleted everything, reset everything, put on a firewall, etc. I tried to boot in Safe Mode and it won't work. The computer has a mind of its own. I think there has got to be some sort of problem with the logic board, I don't know what else it could be. I find myself having to hold down the power button to shut it down because it absolutely refuses to shut down if I click on the shut down option on screen.. it pretty much just tells me NOPE.
    Please help. The Apple Store/Support said there is nothing more they can do for me because my family apparently purchased it through Best Buy, so they said they don't cover things bought through 3rd party. I wasn't aware of it and not sure if I should try going through Best Buy? I am on the other side of the state from my family now, and none of them are particularly gifted with computers, so not sure if how I would get the receipt from them if that's what I need for Besy Buy, or do I just go there ? I've never dealt with Besy Buy before, but can only imagine how awful that's going to be....
    Thanks so much.

    Thank you for your reply. I figured I had the one year Apple care warranty regardless, but when I expressed wanting the laptop to be replaced since it seemed defective out of the box, they told me it was pretty much my problem to go deal with Best Buy and do an exchange through them. My last MacBook really had no major issues until it died after 5 years.. very disappointed in how Apple has been handling it this time around. I have another Genius Bar appointment for this Thursday, I guess I will try yet again to see if they can make this right.

  • Background job - not sure if its executed in BG

    Hi,
    I wanted to submit my program in background and have used
    Job_open, Job_sumbit, Job_close FM's.
    I have passed following parameters.
    Job_open - jobgroup, jobname,sy-datum, sy-timlo
    job_submit- sy-uname, jobcount,jobname,sy-langu, sy-repid
    Joc_close-jobcount,jobname,sy-datum,sy-timlo.
    My program doesn't show any error.
    But I am not sure if it's really executing in background....how to find out?
    I have checked in SM37 and my
    duration time is 0 
    delay time is 25 secs
    status - released
    startdate & time is empty.
    Does this mean it never ran in background?
    Plz help

    Hei ....
    After passing immediate start in job_close.....
    In SM37 i have
    Status as : canceled.
    have start time
    have start date.
    duration as 567
    delay as 60 secs.
    which is better that what i have done previously....Now i get the duration time, start date, start time.
    How can i escape from "canceled"?
    thanks

  • I tried updating my iPod 5th gen to iOS 8 but it only shows me a picture of the iTunes logo and a charger at the bottom, I'm not sure what this means or what I need to do. Can someone please help me?

    I tried updating my iPod 5th gen to iOS 8 but it only shows me a picture of the iTunes logo and a charger at the bottom, I'm not sure what this means or what I need to do. Can someone please help me?

    After restoring to factory settings/new iPod you will then have to restore from backup
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:                         
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • Trying to create a new movie.  It tells me to name my movie, and the only event choice is the last movie I made.  I don't want it there.  I'm lost and I'm just starting.  Not sure I like the new version.  Any help out there?

    I'm trying to create a new movie.  It tells me to name my movie, and the only event choice in the drop down menu is the last movie I made. IMovie Library is greyed out. I'm lost and I'm just starting.  Not sure I like the new version.  Any help out there?

    peggy818 wrote:
    … I'm lost and I'm just starting.  Not sure I like the new version.  …
    have a read in the Manual:
    http://help.apple.com/imovie/mac/10.0/?lang=en#mov755717b21

  • Have been a Verizon customer since I got my first cell phone in my 30's - I am 50 now! A year ago, I stupidly opted to get a new phone on the EDGE program because I was trying my first Samsung device and was not sure I would like it having been an IPhone

    have been a Verizon customer since I got my first cell phone in my 30's - I am 50 now! A year ago, I stupidly opted to get a new phone on the EDGE program because I was trying my first Samsung device and was not sure I would like it having been an IPhone user for years.I was right! Or so I thought.... The Note 3 has been horrible. I am on my second phone(replaced it under warranty) and it still freezes, shuts off on its own, and will not come back on for long periods of time. Having had enough, I decided to EDGE Up to another device. On March 16th I tried to edge up my device online but was unable to. I immediately called to figure out what the problem was. Back in October I had a mix up in my billing where I had set up a payment. It was not done properly by customer service and as a result my line was cut off. I called the EXACT day it went off, filed a complaint about the lack of follow through for my arranged payment, and thought I had it straightened out as the payment was made that same day. That incident, although it was a Verizon error, caused my Edge Contract to be "hotlined". I spent an hour on the phone on March 16th clearing the whole mess up. When the conversation ended, the Verizon representative admitted it was a Verizon error, documented everything, and then told me she was filing a release for the hotline hold that would take a couple of days. Her name was Linda and I stupidly trusted what she said.
    The days passed as I prepared to have a major foot surgery and to get my classroom straight before I would be out recovering for 3 weeks. All the time, my Samsung continued to glitch out like it has since I got it! While sitting on the couch recovering, I decided to deal with the phone issue again and EDGE UP. I figured 10 days latter, Linda would have taken care of the issue. Unfortunately, I faced the same problem and was told it was not eligible to edge up at this time. BACK on the phone again, 2 supervisors, 3 customer service reps. ( JOE from New York being the rudest customer service rep. I have EVER worked with) and 4 frustrating HOURS latter, Jason, the equally rude supervisor from Rochester, New York, informed me that Linda gave me BAD information, there was NOTHING he could do, and I am NOT eligible until April 14th!!!!! The WORST experience I have EVER had with a company. They were completely inept, rude, and not concerned about my time, my frustration, or the problems I was facing with their product in the LEAST. I have 4 LINES on Verizon that I am going to talk to Sprint about buying out. It was a horrible experience, and I can NOT believe I have no recourse or anyone to talk to....

    Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
    I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

  • Help needed I have a canon 40D. I am thinking of buying a canon 6D.But not sure that my len

    Hi all help needed I have a canon 40D. I am thinking of buying a canon 6D.
    But not sure that my lenses will work.
    I have a 170mm/ 500mm APO Sigma.
    A 10/20 ex  Sigma   HSM  IF.
    And a 180 APO Sigma Macro or do I have to scrap them and buy others.
    ALL Help will be greatly received. Yours  BRODIE

    In short, I love it. I was going to buy the 5DMark III. After playing with it for a while at my local Fry's store where they put 5DMII, 5DMIII and 6D next to each other, using the same 24-105L lens, I decided to get the 6D and pocket the different for lens later.
    I'm upgrading from the 30D. So I think you'll love it. It's a great camera. I have used 5DMII extensively before (borrowing from a close friend).
    Funny thing is at first I don't really care about the GPS and Wifi much. I thought they're just marketing-gimmick. But once you have it, it is actually really fun and helpful. For example, I can place the 6D on a long "monopod", then use the app on the phone to control the camera to get some unique perspective on some scenes. It's fun and great. GPS is also nice for travel guy like me.
    Weekend Travelers Blog | Eastern Sierra Fall Color Guide

  • When I click on an email address on a web page, a page no longer opens in my email program. Not sure if this is a problem due to Firefox or due to recent installation of Office 2010. I use a PC with Vista.

    When I click on an email address embedded in a web page, a page would open in my email program with this address in the "To" line. I recently installed Microsoft Office 2010 and now when I click on an email address nothing happens. I am not sure if this is due to Office 2010 or a Firefox problem. I use a PC with Vista.

    https://support.mozilla.org/en-US/kb/change-program-used-open-email-links

  • Lircd keeps segfaulting? Not sure if update causing it....

    Hi,
    I'm not sure if this is due to an update or an update to libraries however when trying to run lircd I keep getting segfaults; with the same commands it was working previously without any issues.
    The current installed versions are:
    extra/lirc 1:0.9.1.a-2 [installed]
    Linux Infrared Remote Control kernel modules for stock arch kernel
    extra/lirc-utils 1:0.9.1.a-2 [installed]
    Linux Infrared Remote Control utils
    and the commands I'm running are:
    systemctl stop lirc
    lircd --driver=devinput --device=/dev/input/event14 --pidfile=/var/run/lirc1.pid --listen=9988;
    lircd --driver=devinput --device=/dev/input/event15 --pidfile=/var/run/lirc2.pid --connect=localhost:9988;
    I'm using an MCE remote to control XBMC.
    Bus 005 Device 002: ID 05a4:9881 Ortek Technology, Inc. IR receiver [VRC-1100 Vista MCE Remote Control]
    As stated everything worked fine earlier but after doing a "pacman -Syu" things started to go funny.
    I even had issues with XBMC not starting due to libGLEW being updated but I think it's fixed now as there have been 2 XBMC updated within the last few days.
    Does anyone have any suggestions or do I just need to wait for an update to lircd?
    Thanks.
    [EDIT]
    Since the event codes changed I used this to find out the new event numbers:
    cat /proc/bus/input/devices
    However I still get this:
    lircd --driver=devinput --device=/dev/input/event13 --pidfile=/var/run/lirc2.pid --connect=localhost:9988;
    Segmentation fault
    Last edited by JohnnySSH (2014-08-19 14:04:05)

    Well.... an update came in today which fixed the issue.
    Thanks to whoever updated/fixed the package :-)

  • I have an iPhone 4 which is synced with a non apple laptop and wish to sync it with my new iMac.  I have backed the phone up with the laptop and am not sure how to sync it with the iMac without loosing any contacts, emails or photos from my phone.

    I have an iphone 4 which is currently synced with a non apple laptop and I wish to sync it with my new imac.  I have just backed the phone up on my laptop but am not sure what I need to do now.  I do not want to loose any contacts, emails or photos from my phone when I change sync computers.  Can anyone assist with a step by step guide as to how to achieve this oucome?  Thanks in advance.

    Have you read this?
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/HT4527
    The Apple web site has lots of other guidance, for example if you are migrating from Windows to Mac, read this.
    Switch 101: Migrate your Windows files or system to your Mac
    http://support.apple.com/kb/HT2518

  • HT1386 I have an older iPhone (3gs) and need to upgrade to a newer phone (4S).  I need to get my NOTES, CALENDAR, CONTACTS, PICTURES, etc backed up on iTunes so I can get that data loaded onto the new phone.  But not sure how to do that.

    I have an older iPhone (3gs) and need to upgrade to a newer phone (4S).  I need to get my NOTES, CALENDAR, CONTACTS, PICTURES, etc backed up on iTunes so I can get that data loaded onto the new phone.  But not sure how to do that.  When I open iTunes it has a button that say "Back Up iPhone", but I'm not sure what that does.  When I go into the sync options it say I have another user account and asks me if I want to merge of replace. I'm assuming it's trying to tell me I have an older iTunes Library, but don't know that.  Geez, maybe people over 60 shouldn't have iPhones, iTunes just bafles me.

    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • Battery not charging, dim green light on Magsafe. Stuck at 37% battery life. Not sure the issue, so I need some help.

    Yesterday, my Magsafe power adapter/battery was working fine. I had  unplugged the machine last night to do some work, and I left it  unplugged all night. It held a good 90% charge over the night, and after  using it for a few hours I wanted to plug it back in. I noticed the  normally bright amber light on the Magsafe did not come on, but a faint  green light.
    The machine says "Battery is not charging", but no "Service Battery  Warning has shown up. I also attached an image of my results from  Coconut Battery, just not sure what the numbers mean.
    Any ideas?

    I reset the SMC, nothing changed, I took out the charger to clean, but there wasn't anything dirty.
    BUT as soon as I plugged the MagSafe out, the power percent jumped from 37% to 47%. Still not charging, I am very confused on how it charged??

  • TS1702 My iPhone 4s didn't do it until the latest update so imnpretty sure it's on the apple server some sort of bug maybe? Not sure. But whatever it is I really would like to download apps. It won't let me download any apps and my phone is brand new

    My iPhone 4s didn't do it until the latest update so imnpretty sure it's on the apple server some sort of bug maybe? Not sure. But whatever it is I really would like to download apps. It won't let me download any apps and my phone is brand new.

    Sorry guysy iPhone says unable to download application at this time and I try all day and it still won't let me download no matter how hard I try.

  • I'm trying to install iTunes on my computer running Windows 7 Home Premium.. I'm not sure if iTunes is compatible with it because when I try to install it, it says the installation is complete but it says there was an error so I can't get it! Please help!

    Hellooo Apple Community!
    I'm trying to install iTunes on my computer running Windows 7 Home Premium. I'm not sure if iTunes is compatible with my computer operating system because when I try to install it, it says the installation is completed but it says there was an error so it won't let me get itunes! Can someone please tell me if iTunes can be downloaded and installed on "Windows 7 Home Premium" and if so, how?! I need iTunes asap, I have an iphone 4 running ios 6.1.3. Please get back to mee!!
    Thankyou thankyou thankyou!
    Natalie.

    I just tried running the Lenovo Hard Drive Quick Test both in normal mode and in safe mode.  Both times it indicated a failed read test on the HDD. The last two tests also failed.  I forget what those tests were called.
    I am really beginning to think I have a bad HDD and the problem just happens to be in the reserved partition where my factory system software resides.

  • When i go to sing into apple id it says "We apologize but we are unable to verify your account information online". When i go to "Not sure if you have an Apple ID?" It says "We apologize but we are unable to verify your account information online"

    When i go to sign into apple id it says "We apologize but we are unable to verify your account information online". When i go to "Not sure if you have an Apple ID?" It says "We apologize but we are unable to verify your account information online" When i try to sign in with my email it says "you already have an account????

    Might I suggest a password reset?
    Maybe you can click on the Reset Password link instead of trying to log in at appleid.apple.com.
    I'm not sure if that would work, but its worth a try.
    ~Lt. Leviathan

  • Not sure why line break is not working

    Hi all,
    Here is part of my simple Swing application:
    String text1 = "hello";
    String text2 = "world";
    String text3 = text1+"\n"+text2;
    // have also tried (String text3 = text1+"\n\r"+text2;)
    displayField.setText(text3);I supposed that the text3 in the label field (displayField) would display like this:
    hello
    world
    But not, the text3 just displayed in the same line like this instead: helloworld.
    I am not sure why the line break is not working.

    Use HTML for a multiline JLabel.// String text3 = text1+"\n"+text2;
    String text3 = "<html>" + text1 + "<br/>" + text2 + "</html>";db

Maybe you are looking for