HND not blocking MSN access.

I have used "Configure Home Network Defender" to set up a rule for my teen's computer.
The internet blocking is working, but he still has access to msn outside of the specified hours.
How do you block ALL internet activity?
I have the Linksys WRT310N Router. Can it be configured with HND or directly?
Thanks
Message Edited by PeskyPete on 01-15-2010 11:43 PM

The long way to do this might be.......
Set Timed Access temporarily back to Unlimited Access as the default.
Power off the Mac and all but one PC
Connect with the PC to the AirPort Extreme
Open AirPort Utility - Click Manual Setup
Click directly on Wireless Clients about 2/3 of the way down the page
The xx:xx:xx:xx:xx:xx number that you see is the ID that you need to use for the PC wireless
Turn off the PC that is on and power up another PC and connect
Do the same check to find the ID of the next PC, etc.
When you have the ID numbers that you need, go back and setup Timed Access again.

Similar Messages

  • WRT1900AC does not block internet access in Parental Control

    Hi,My router does not block internet access on my other PC. I tryed "Always" tryed specific addresses, tryed IP addresses and everything tech support suggested. I even replaced the router at their advise. Nothing helped. I realize that the problem is not the router but probably my home network configuration, but I can't figure out what is it. To my defence, so couldn't they Does anybody have or had such a problem?Thank you

    What Firmware version is currently loaded?Can you post screen shots of how you have the controls configured?Does the User Manual give any configuration help?  Internet Service Provider and Modem Configurations  
     What ISP Service do you have? Cable or DSL?
     What ISP Modem Mfr. and model # do you have?  Router and Wired Configurations  
      Setup DHCP reserved IP addresses for all devices ON the router. This ensures each devices gets its own IP address when turned on and connected, eliminates IP address conflicts and helps in troubleshooting and maintain consistency for applications that need to connect as well as mapped drives. 

  • I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc. I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting fo

    I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc.
    I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting for it to work.
    Can you please help me with this?
    Thanks Matthew.

    Hello,
    The services you listed in your post will require a data plan which is provisioned by your wireless provider. You may want to contact your wireless provider to see if you have the correct plan.
    Cheers,
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

  • HT3576 how can i verify that the network or firewall is not blocking access to port 5223.

    how can i verify that the network or firewall is not blocking access to port 5223?

    Talk to someone who knows something about networking and/or firewalls on an appropriate forum.
    Configuring your network and/or firewall is beyond the scope of this forum, which is devoted to issues using the iPhone.

  • HT3576 How do you, verify that the network or firewall is not blocking access to port 5223.

    How do you, verify that the network or firewall is not blocking access to port 5223.

    Maybe:
    http://answers.yahoo.com/question/index?qid=20110606132954AAZH4Tc
    http://forum1.netgear.com/showthread.php?t=48533

  • Access Keys not blocked when popup is open

    Hi,
    We are using Jdeveloper 11.1.1.4 and we have the requirement to add access keys on specific buttons in our application.
    When a popup is open the background page is disabled and the user cannot click on buttons outside the popup.
    If however a button in the background has an access key and the user uses it, the action gets executed.
    Is this a bug? does anyone know of a workaround in order to block the access keys in the background when a popup is open?
    Gabriel.

    Hi,
    We got an answer from Oracle support... not the one we were hoping for though:
    "the Development team confirming that _the issue is not a defect_. We have an Enhancement Request 10170506 logged for the issue to be _considered_ by Development in the future releases......."
    The access keys functionality is a high priority for our clients and this is going to be a serious issue for us.

  • I would like to canceal an Update since I do not have an access to a wifi network and the up is kind of blocked

    I would like to canceal an Update since I do not have an access to a wifi network and the up is kind of blocked

    What is showing you have an update?
    How do you know if you have an update if you do not have a wifi connection?
    and the up is kind of blocked
    What is the "up"?

  • How do I replace someone else's Mac ID with my own? Bought iPhone second hand. Previous owner re-set the phone but his ICloud account stayed on now my phone. He uses his macID on his new iPhone now?? Any ideas, as this issue is blocking my access to iTune

    How do I replace someone else's Mac ID with my own?
    Bought iPhone second hand on TradeMe.
    Previous owner re-set the phone but his ICloud account stayed on now my phone. He uses his AppleID on his new iPhone now and, understandably, does not want to give me his password. Any ideas?? Please.
    This issue is blocking my access to iTunes and any other file from my home computer. It keeps on telling me that I have to autorise my computer to pass on files, yet, it seems, for all this to happen, I need to get logged in through the phone's Apple ID. This of course is different to my one on my computer - and I have no password for it.
    This phone is not stolen!! I payed still a fair bit for it. Am still in contact with the previous owner. He doesn't know how to fix the problem either.
    Would appreciate any suggestion ????
    Thanks
    SamSings

    Settings>general>resets>erase all content and settings.
    That will put it back to its out of the box state. Set it up with your own apple Id.

  • Error: You do not have sufficient access to perform a lock on this database

    Hi,
    Can anyone help on this.
    When user try to load data through Excel it throws the following error "You do not have sufficient access to perform a lock on this database"
    We are using Essbase 6.5.
    We have tried following options
    FIX1:
    In Microsoft Excel, under ESSBASE -> OPTIONS, under the MODE tab, the check box UPDATE MODE is checked.
    When the UPDATE MODE check box is selected retrievals will automatically lock the corresponding database area with each retrieval. Disable Update Mode to stop locking blocks automatically. In update mode, the Send command (which updates the server with data values from the spreadsheet) does not automatically unlock data after the send.
    1. Launch Microsoft Excel
    2. Select ESSBASE -> OPTIONS
    3. Select the MODE tab
    4. Uncheck "Update Mode" to return to normal mode
    This error is seen when trying to lock and send data via the Hyperion Essbase Spreadsheet Add-in into that fall within a replicated target partition definition
    1. Go to HYPERION APPLICATION MANAGER -> DATABASE -> PARTITIONMANAGER
    2. Select the relevant partition
    3. Select EDIT
    4. On the CONNECT TAB, select SETTINGS and tick the option THETARGET PARTITION CAN BE UPDATED
    Also gave write access to that user.
    Can anyone give another possible solutions.
    With thanks,
    babu

    Hi Raja,
    Check this out../
    Weird problem regarding Essbase Excel plug in
    It might help
    Regards
    Amarnath

  • Win 8.1 domain workstation. Block all access, except for a fews users/groups and domain controller information/date.

    Hi!
    Win 8.1 pro, domain workstation. How Block all access, except for a fews users/groups and domain controller information/date.
    Nuance:
    From domain AD is locked Workstation Firewall "Domain profile" edit.
    Possible?
    cenubit

    Hi GirtsR,
    I am not sure the command to use the SID to accomplish what you want to achieve, if you only know the SID, you could take use Powershell to find the related information, more information, please check:
    Working with SIDs
    And a similar thread for reference:
    How to find user/group known only SID
    More reference: Default local groups.
    Best regards
    Michael Shao
    TechNet Community Support

  • Issue with UAG/TMG communication to published SharePoint application is blocked by access policy settings

    We have a UAG/TMG server set up with SharePoint published. The UAG is also doing load balancing for the SharePoint farm. We have an MDM application that is trying to connect to our SharePoint but our SharePoint is routed through the UAG. The MDM application
    does not need to be published neither is there any component that can be accessed directly by end users. It is more of a proxy to relay content to mobile devices. It is using 443 and two other secondary ports.
    On the TMG logs, we can see requests hitting the TMG over port 443 from the MDM application server. We can also see that it is trying to be routed to our SharePoint but we get the following error in the TMG log:
    “Filter information: A request from source IP address xx.xx.xx.xx, user to trunk portal; Secure=1 for application SharePoint of type SharePoint15 failed. The endpoint device does not comply with access policy settings ([%PolicyId%]) for session [%SessionId]”
    The source IP is the internal IP of the host running the MDM application. In the UAG side, under the SharePoint publishing rule, for Access Policy Settings we have tried selecting the 'Always' option but that had no effect. It appears like there is a policy
    blocking communication to SharePoint. Does anyone have a suggestion on which policy or where the policy that is controlling this is located so that we can try to resolve this issue? Thanks.

    Looking at the UAG Web Monitor, it says that the access policy is 'Hybrid_Default_Session_Access' and the URL is /_vti_bin/Webs.asmx. 
    We can't find a 'Hybrid Default Session Access' policy. In the Endpoint Policy Settings tab, we tried using 'Always' for the Access Policy for the published SharePoint application but that did not make any difference. 

  • BlackBerry Curve 9320 not able to access BlackBerry App World

    Hi All,
    I am new to Using BlackBerry.I have got a BlackBery Curve 9320 also as it requires 3G Net Connection for accessing internet i have put Vodafone's 3G internet pack as my network provider is Vodafone.But still i am not able to access my BlackBerry App World and many other stuff.But when i connect to my friend's mobile internet with Wifi i am able to access BlackBerry App word.Also when i try to access BlackBerry App it says " we cannot connect you to Blackberry App World.Please ensure that your devide is connected to the wireless network and try again"
    Please Help and Guide...
    Have a Rocking Day ahead!
    Thanks and Regards,
    Sushma Ramakrishnan Iyer (PS No. 298028),
    SalesForce.Com Team,
    HiCE Business Unit,
    Old Building - Block 1,
    Plot No.EL - 200 | TTC Electronic Zone,Shil - Mahape Road,
    Mumbai - 400710.
    Mobile : +91 96 6515 6328 | Work : +91 22 6795 4111
    E-mail id : [email protected]

    Hello Sushu
    Welcome to BlackBerry Support Forums
    If you want to access most BlackBerry Application over your Mobile Network then a  normal 3G data plan will not allow us, for that you have to activate BIS / BlackBerry Data Plan from our Carrier . However currently many application may work over a WiFi network .
    So if you want to use those applications over your Carrier Network then call Vodafone and activate BIS  on your account. 
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • I am running windows xp home edition on my netbook. I have Kaspersky virus protection. Your new 6.0 blocks my access to Kaspersky. How do I get the older level that works with it?

    It blocked the access to Kaspersky and corrupted my Kaspersky database. I had to reload. Not much of a good "upgrade" experience

    See Kaspersky for a Firefox 6 compatibility update.

  • "the firefox application is not allowed to access the graphics hardware"

    I would like to ask for help the following phenomenon:
    "the firefox application is not allowed to access the graphics hardware"
    This error message appears, at times, and then restart the browser once in a while it's all good.Do not use any accessory.Operating system: Win 8.1 64 bit Oh, even so much that the virus and malware search engine does not find anything.
    Any idea?Thank you very much.

    Strange, I mostly found this error happening for game software: http://www.tomshardware.com/answers/id-1877769/error-program-blocked-accessing-graphics-hardware-update.html
    In 8.1 there is a way to block applications from using the graphics hardware acceleration. Opening up the device manager [http://pcsupport.about.com/od/windows-8/a/device-manager-windows-8.htm]

  • Is it Possible to Block MSN Accounts on the New MS...

    So, being as I had to roll back my laptop to a fresh start today, I had to redownlaod Skype Desktop. Seeing as the end of MSN was nigh I decided to merge the two. To my surprise I've discovered that I cannot block 'messenger' class contacts. My favourites, which are all Skype, can be. So is there a way to block 'messenger' class contacts or is the only option to remove them? I know I could just live in appear offline mode but, that really does not solve this problem long term. Nor does removing my whole MSN contact list as occassionally these people are useful; I just don't want to be pestered all the time.
    Skype Verison: Desktop - 6.1.0.129
    Operating system: Win 8 64bit
    Thanks in advance and my apologies if this end up in the wrong board!
    Solved!
    Go to Solution.

    To block MSN contacts you can use People website
    Regards,
    Tamim
    Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
    If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

Maybe you are looking for