Ho can I use left / right dock position when using two screens?
OSX 10.9 makes a big thing about having the Dock on the active screen. This certainly works when the Dock is at the botom of the screen, although it does seem sluggish at times before it appears. I have tended to have my Dock on the left of the screen as I was getting annoyed at losing the bottom part of the screen on my MBP 13".
Mavericks doesnt seem to like this and regardless on how I configure the second screen I can't get the Dock to jump away from the MBP screen, apart from closing the lid on my laptop. Still happening when I put the two screens vertically rather than horizontally (so that the left side of the screen is not a transition zone between the two).
This is quite frustrating. I have tried using Dock at bottom again and am just going to struggle with that having not used it for many years now.
I wonder whether they have just assumed that most people have the Dock at the bottom and functionality has been built around that.
Any ideas out there? Apple, any comments?
Hello again Kirby, I was able to find a workaround that prevents colors from looking overly vibrant on the external display. It seems the "Swap Displays" option under Aperture's monitor configuration drop-down is the culprit. When this is disabled, colors on both monitors match in vibrancy (as much as one can expect given how different the two screens are). But as soon as you enable "Swap Displays", colors on the external display become twice as vibrant. So then the question becomes, how does one show the thumbnail viewer on the laptop screen while viewing the fullscreen image on the external display?
The workaround is along the lines of what you posted. In dual-monitor mode, Aperture places the thumbnail viewer by default onto whichever screen holds the system menubar. So by placing the system menubar on the laptop screen, I'm able to work in fullscreen mode in the configuration I want without having to activate "Swap Displays", thereby avoiding the boosted colors bug.
I'll be sending the issue to Apple Feedback now that I have a better understanding on what exactly causes the issue and how to replicate it. Thanks again Kirby for your assistance.
Similar Messages
-
How can I use two screens to display one window
Before Mavericks, MAC OS allowed you to use two screens (next to each other) in order to display one (big) window of one application.
That would mean that a window would start on your left screen en would continue on the right screen.
With Mavericks, however, this not possible any more. The window of the application can only be seen on ONE of the screens (i.e. the left one).
Can any one tell me whether I've missed certain options or how to adjust my settings in order to get this feature back?Hey CGNL,
First, if you haven't already, set up the displays as an extended desktop:
Choose Apple menu > System Preferences, click Displays, then click Arrangement.
Follow the onscreen instructions.
Then, use Mission Control preferences to uncheck/turn off the option for "Displays have separate Spaces":
Choose Apple menu > System Preferences, click Mission Control
Uncheck "Displays have separate Spaces"
That should enable you to stretch whatever window you want across multiple displays.
via: OS X Mavericks: Connect multiple displays to your Mac
http://support.apple.com/kb/PH13814
and
OS X Mavericks: Mission Control preferences
http://support.apple.com/kb/PH13925
Welcome to Apple Support Communities!
Have a good one,
Delgadoh -
I currently have a 30" cinema display connected to my MBP, just wondering, can I also hook up my 23" (Plastic casing) cinema display too? is this possible and what cable do I need - where do I plug it in?
If you want to extend your desktop across both external displays, you need more than just a cable. You'll need additional hardware, such as one of the Matrox graphics modules.
-
Grey color cover the screen and can't use touch screen when trying to open the internet.
Pleas help, yesterday when I tried to open an website on my I pad 2 and there was a grey color cover the screen and I can't use touch screen, i still can see the internet is working in the back ground of the screen and the webpage was opend but I just can't make the grey color screen disappear. Thanks million.
Go to Settings>Safari>Clear History, Cookies and Cache. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If that doesn't work, reset the iPad. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Last thing to try is quit the app and restart the iPad. Go to the home screen first by tapping the home button. Quit Safari by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on the Safari icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. -
Can I use two airport extreme base station on the same network
Can I use two airport extreme base station on the same network
Here is my network setup:
D-Link DCM-202 simple cable modem (DOCSIS 2.0 compliant)
attached via ethernet to
5th generation AirPort Extreme Base Station - Main (Bought last week)
attached via ethernet to
4th generation AirPort Extreme Base Station - Remote (Bought about 11 months ago)
The main AEBS is set to:
AirPort Section:
Base Station Tab -> Allow setup over WAN is CHECKED
Wireless Tab -> Wireless Mode: Creat a Wireless Network, Radio Mode: 802.11a/n - 802.11b/g, Radio Channel Selection: Automatic, Wireless Security: WPA2 Personal
Internet Section:
Internet Connection Tab -> Connect Using: Ethernet, Ethernet WAN Port: Automatic (Default), Connection Sharing: Share a public IP address
TCP/IP Tab -> Configure IPv4: Using DHCP
DHCP Tab -> DHCP Beginning Address: 10.0.1.2, DHCP Ending Address: 10.0.1.200, DHCP Lease: 24 hrs
NAT Tab -> The box following 10.0.1. is left blank, Enable NAT Port Mapping Protocol box is CHECKED.
The remote AEBS is set to:
AirPort Section:
Base Station Tab -> Allow setup over WAN is CHECKED
Wireless Tab -> Wireless Mode: Creat a Wireless Network, Radio Mode: 802.11a/n - 802.11b/g, Radio Channel Selection: Automatic, Wireless Security: WPA2 Personal
Internet Section:
Internet Connection Tab -> Connect Using: Ethernet, Ethernet WAN Port: Automatic (Default), Connection Sharing: Off (Bridge Mode)
TCP/IP Tab -> Configure IPv4: Using DHCP, IP Address: 10.0.1.2, Subnet Mask: 255.255.255.0, Router Address: 10.0.1.1, DNS Server(s): 10.0.1.1 (Everything else under this tab is blank)
Hope this helps with info needed. -
Can we use two separate apple ids on one laptop to upgrade apps
can we use two separate apple ids on one laptop to upgrade apps
Welcome to the Apple Community.
Only if you use two separate user accounts. -
Can I use two or more Apple ID accounts on the new Apple TV? Everyone in my family has a seperate account.
Of my 7 Apple TV's only one is connected by ethernet, they all work as expected, more often than not at the same time (I probaly haven't had 7 running at the same time, it depends on who's using what))
-
Can i use two apple tvs with one itunes account?
can i use two apple tvs with one itunes account?
yes and you can use more then 2
just don't give them the same name -
If I have set up my Mac with two different users, can I use two different Apple IDs on the same Mac?
Each user account may have its own Apple ID.
-
Can i use two icloud accounts on the same computer?
can i use two icloud accounts on the same computer?
You can have content from two iTunes Store accounts in one library, and multiple libraries on a computer.
(98306) -
Can I use two different devices with different apple ID for backing up data on one machine without losing any data that was backed up with one device earlier?
The link is to a discussion started on 12/18 in the FiOS Internet forum. Here's the link I get now, however it is different than the link I pulled a few hours ago. If this system changes the link again, it may not work.
http://forums.verizon.com/t5/FiOS-Internet/Frustration-and-just-confused-with-internet-help-please/t...
You can also look for the topic, "frustration and just confused" in the FiOS Internet forum.
Here's a link that is in the thread that gives more detail.
https://secure.dslreports.com/faq/15984
Good Luck!
P.S. "Copper Contributor" is my "rank." gs0b is my user name.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. -
Can I use two different itune accounts on one computer?
Can I use two different itune accounts on one computer?
1. Give her a separate user account on your computer. If you have a backup copy of the library, you can restore it.
2. If you encounter a 90-day waiting period, click here and ask the iTunes Store staff if they'll remove it.
(125941) -
How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.
How To Using Two Different Public IP Address on My DMZ with ASA 5520
Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
Hi everyone out there.
can any one please help me regarding this situation that im looking for a solution
My old range of public ip address are finished, i mean (the 41.x.x.0 range)
So now i still need to have in my DMZ another two servers that will bring some new services.
Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
on Cisco ASA 5520 v8??
How my configuration should look like?
I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
attached is my network diagram for a better understanding
I thank every body in advance
JorgeHi,
So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
Now you have gotten a new public IP address range from the ISP and want to get it into use.
How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
Of the above ways
The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
- Jouni -
How can I use two differant iphones on one itunes
I can i use two differant iphones on one itunes, and keep the content seperate?
You can sync as many iphones/ipod/ipads as you like to one computer.
Each is different and is recognized as such -
How can I use two accounts (mine and my wife's) to PhotoStream to my mac? I have to turn off photo stream for one or the other...can't I just leave two accounts logged on so that the photos from my iphone and hers both go to my mac?
Photostreaming across machines requires to use the same Apple-ID on all of these machines or devices. Share all of iclouds account stuff or nothing at all . No way around as icloud is designed that way. Photostream is not designed as a sort of gallery to share with outsiders. It is for your personal entertainment .
Maybe you are looking for
-
Hi all. I have create a FM ZRFC_FILENUMBER on R/3 side. Then i created webservice in the R/3 itself for this RFC. It gave me WSDL file. I have loaded this WSDL file in XI external definitions. In the receiver adpater configuration i am using the URL
-
I need some advice on SharePoint 2013 Search site collections best practices. After setting up my Search Service Application, I created an Enterprise Search center on my application (Central Admin) server. I then created an Enterprise Search Collecti
-
A big headache going on here. I am trying to output some information to a file. Now the problem is that I am getting unrecognised symbol errors from BlueJ and I am not sure why. I have looked through the API and as far as I can see all the methods ar
-
Hello All, Please tell me how to show table control in display mode, My requirement is , whenever ill put T-code for table maintainace it should be appear in display mode. Thanks, Gaurav
-
How do I cut a circle into equal parts?
I have a circle but I want to cut it into 5 equal parts and have each part on a seperate layer - kind of like a pie chart. Is there a quick and easy way to do this in CS6?