Ho to add external phone number to Cisco 7911 or extension

We have CCM 8.2 and need to add external phone number from the list to one of extension. I added the phone number to External Phone Number Mask under line configuration on the phone. Additionally I created translation pattern and still no luck. I used the phone that was assigned to some else, I can hear like two busy signal and drop. 
I copied settings from another extension configuration that has external number assigned.
Thank You! 

Thank you I have already figure it out: I agree I did not provide enough info. For external DID redirected to specific extension you use Translation Patterns - right?
But then (its up to the provider) you use last 3 digits of your available from list DID you purchase from that provider - right? Then you specify extension number in the CALLED PARTY TRANSFORM MASK -
make sense? There are other way to do it, but this one works at least for me. I am not an expert but at least after whole day of fighting it worked for me. So please understand people starting journey with call manager. Thank You

Similar Messages

  • External Phone Number Mask Question

    We have several phones with NonDID number on them.  Our route pattern is setup to use an external phone number mask of the sites main number (1112223333).  However on two of the phones, we would like to have a different number displayed (1112224444). We have tried to do this by entering this number (1112224444) into the extranal phone number mask of the DN on the 2 phone.  This did not work, the main number (1112223333) is still being displayed (caller ID).
    We know that we can just remove the external phone number mask from the route pattern and then enter one (external phone number mask) into every dn.  But, is there an easlier way to accomplsish this (there are currently 50 phones at this site)?

    Unless the checkbox for use the external calling party number is checked in the RP it's useless to set it on the phone.
    You're sending the main number because most likely the checkbox is unchecked and as you mentioned you have hardcoded that mask.
    Other than copying the RP, creating new partition and modifying CSS from those 2 phones, I would just check the checkbox on the RP and use BAT to change the external calling party mask on the DNs.
    HTH
    java
    If this helps, please rate
    www.cisco.com/go/pdihelpdesk

  • Use External phone Number mask * Calling party Transform Mask @ Route patt

    Having an issue with CLID at RP level. Lets say I have two phones. One phone is configured with an External phone number mask of 1112223333 and the other one does not have an external number mask set. When a call is placed to the PSTN, Phone one needs to display its external phone number mask. Phone two since nothing has been added under external phone mask needs to be 1112224444.
    I configured the RP to "Use External Phone Number mask" and set the Calling Party Transform mask to 1112224444. I figured that if an external phone number mask was specified under the DN that it will route it to the PSTN and if nothing specified under the DN it will default to 1112224444 according to the setting in the RP.
    When I configured this, no matter what I do the calling party transform mask takes priority and the external phone number mask is never used. Is there a way around this? I tried it at the RL level and it does the same thing.
    Does anyone have any other ideas other than adding an external phone number mask for every phone.

    Thats what I thought. Why can't they add that as a feature in the next release of CM? It seems like it could be simple to do. Check for External Phone number mask, if nothing is specified, then check for calling party transform mask. If true set Calling Party transform Mask as CLID and route to RL or something like that..
    thanks

  • My iPad is getting iMessages from a past user and won't let me add my phone number. Help!

    Hello,
    I recently was gifted an iPad 3 from my boyfriend to use as I please, since he got a new one.  I also recently got an iPhone 5.  He had the ipad set up to his phone number, and when I logged his apple ID out of setting>apples&itunes and put mine in, and also went to settings>messages>and added my apple account info, it only gives me a check mark for my email, and not one for my phone number.
    When it was logged into his account, he had a checkmar I next to his email and his phone number, so he would receive all his iMessages through his ipad. I don't see anywhere to add a phone number.  Anyone have any ideas why this isn't working?
    I hope that made sense.
    Thank you!!!

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
     Cheers, Tom

  • HT1212 how do i add a phone number to my ipod touch?

    hello, i have ipod touch 4g version 6.1.5 and can i add a phone number because my emails for some reson dont work on imessage or on facetime but i was thinking maybe my phone number would work and when i typed in my phone number i said invaild email. so please help me!!!! and is it possilbe to download IOS 7 on ipod 4 cuz my friend has it on his ipod 4 ?

    The only way is to get an iPhone with iOS 6 or later and use the same Apple ID for Settings>Messages
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    As Apple said in June, iOS 7 is not compatible with the 4G iPod.
    All the iOS devices compatible (iPhone 4 and later, iPad 2 and later, and 5G iPod touch) with iOS 7 have at least 512 MB of memory (RAM). The 4G iPod only has 256 MB

  • How can i add one phone number to my macbook pro application imessage

    how can i add one phone number to my macbook pro application imessage

    Make sure that the iPad is using the same Apple ID as your iPhone. If the phone number still doesn't appear, log out of iMessage on both devices, log back in on the iPhone, wait until it activates, then log into iMessage on the iPad with the same Apple ID.

  • My Canadian iPhone will only show my US iPhone number on my Apple ID. How do I add a phone number so I can iMessage with my Canadian number? To

    How do I add a phone number so I can use either my US or Canadian number (depending on where I am) with iMessage and Facetime on both my iPhones?

    Tdalso wrote:
    How do I add a phone number so I can use either my US or Canadian number (depending on where I am) with iMessage and Facetime on both my iPhones?
    You need to log out of iMessage and Facetime, make sure your number is correct in Settings/General/About, then log back in again to send a new activation request.

  • How do I add a phone number to my Ipad air in imessage

    how do I add a phone number to IMessage on my iPad ai?

    Make sure that the iPad is using the same Apple ID as your iPhone. If the phone number still doesn't appear, log out of iMessage on both devices, log back in on the iPhone, wait until it activates, then log into iMessage on the iPad with the same Apple ID.

  • How do I add a phone number to Favorites?

    How do I add a phone number to Favorites?

    Here's How:  Tap the phone icon from the iPhone's the home screen. Tap the Favorites icon at the bottom left. Click the "plus" icon at the top right to add favorites. This will bring up your full contacts list. Scroll through it or jump to a letter to find the contact you want. When you've found the name, tap it. This will bring up the contact's information, including all their phone numbers. Tap the phone number you want to make a favorite. That name and phone number are now listed in your "Favorites" menu. Next to the person's name is a small note indicating whether the number is work, home, mobile, etc. To rearrange the order of your Favorites, go to the phone app and tap the "Edit" button in the top left. This will bring up a screen with red icons to the left of the favorites and an icon that looks like a small stack of three lines on the right. Tap the three-line icon and hold it. The Favorite you've selected will become active (when active, it appears to be slightly above the other Favorites). Drag the Favorite to the position in the list you want it to have and let it go. Click "done" in the top left and your favorites will be reordered.

  • Basic - I guess. how do i add a phone number to an exisiting account or edit type of number - for example busines as oppopsed to cell.

    How do I add a phone number to an exisiting contact or edit a numnber to change it from, for example, cell to business

    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • How do I add my phone number to iMessage on iPad

    How do I add my phone number for my iPhone to my iPad for iMessage. On the settings on iMessage it only gives the options for an email. I have tried typing my mobile no in there but it doesn't accept it and there doesn't seem to be any other way to add it.
    I was getting iMessages for my mobile number on my iPad until I recently logged out and then back into my apple ID. Now the mobile number has disappeared on my iPad for both FaceTime and iMessage.

    Use a free email address like gmail.com.
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • TS2755 My Facetime and imessage are set up to be used by my email address only and I can't add my phone number to either. Does anyone know how to resolve this? I would be grateful for any help.

    I cannot add my phone number to Facetime or imessage. The number is listed but not ticked and is greyed out. Does anyone know how to add the phone number? Thanks for any help.

    Adobe Reader is a FREE program, so you would not enter a credit card
    If you have a subscription to a PAID program, removing your credit card information would cause that program to stop working when you stop paying for your subscription
    If that is what you want, here is the information on how to cancel
    Cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • Is it possible for a person to add your phone number into their imessage on an ipad without a notification popping up on your number?

    I have a suspicion that someone has added my phone number into their imessage and can read all my texts with no notification sent to my phone.  Is it possible to add a phone number to your imessage without that device getting a notification?

    I use multiple iOS devices at my house, on my two (phone and ipad) I have my family AppleID we use for all purchases as my iMessage userid, on my wifes iPad we made a new ID Just for her messaging and installed that.
    When she sends me an IM I get it on both devices. When i send to her its only her ipad.
    Jason

  • External Phone Number Mask issue in CUCM 8.6

    I'm having an issue with External Phone Number Masks in CUCM 8.6
    Until recently our DID ranges were all in the 301-713-nnnn range.  Using the EPNM worked successfully providing CallerID.    We have now added some DIDs with the prefix 301-427.
    I have set the Route List Detail Configuration to:
    Use Calling Party's External Phone Number Mask*  Off
    Calling Party Transform Mask   3014279999
    However, when I run debug isdn q931 on the gateway the Calling Party Number = '3017139999'.
    It appears that the mask 3014279999 is being changed to 3017139999 by Call Manager,  but I do not know where this is happening.   
    I do not have any translation  or transformations set.

    Here is my understanding of the Caller ID.  You can set or change the ID in 4 places:
    1.  The DN - set the External Phone Number Mask on the DN on the phone device e.g. if the DN is 1234 and the EPNM is 301713XXXX , the caller ID becomes 3017131234
    2. The Route Pattern - you can check the box to use the EPNM set in 1 or leave unchecked and set a mask here in the same way as 1.   A mask set here will overwrite the mask in 1. In my case I want to use the EPNM and I have the option unchecked and no transformation
    3. The Route List (Route List Detail) - you can set Use Calling Party's EPNM to ON or OFF or Default.  ON means use the DNs EPNM.  If set to OFF you can set a mask here and this will overwrite the mask in 1. and 2.   I my case I have this set ON to use the DNs EPNM
    4. On the Gateway - on the endpoints you can set Caller ID DN in Call Routing Outbound Calls.  This setting overwrites the masks from 1., 2. and 3.   You need to reset the gateway (not just the endpoints) for changes to take effect.   In my case this is blank.  It did have a value of 301713XXXX.  When I removed this I failed to reset the gateway to the setting was still active causing my issue

  • I have original ipad and however I cant add my phone number to lmessage it will only take an email address . Is this correct ?

    I have original ipad and however I cant add my phone number to lmessage it will only take an email address . Is this correct ?

    I copied this from an Apple Support article.
    If your phone number is not listed on an iPod touch or iPad, follow these steps:
    Update to the latest version of iOS.
    Verify that you're using the same Apple ID that you are using on your iPhone.
    On your iPad or iPod touch, sign out of your Apple ID in the following locations:
    Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
    Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
    Sign in to your Apple ID with FaceTime and iMessage.
    If your phone number is still not listed, follow these steps:
    Sign out of your Apple ID on all iOS devices, including your iPhone, in the following locations:
    Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
    Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
    Sign in to your Apple ID on your iPhone.
    When activation is complete, your Apple ID and all verified email addresses should be visible in Settings > Messages > Receive At and also in Settings > FaceTime.
    Now sign in to your Apple ID on your other iOS devices.
    This is the website for the support article.
    http://support.apple.com/kb/HT5538

Maybe you are looking for

  • Group and Workspace are detached

    Hi there, I created a group "LMS-EMEA-JPE-DE" at that time the policy did not add automatically the ending Workspace to each auto-created workspace to a group. How can we get all current and future users for the Workspace and Group in sync. We also w

  • Write to measurement file note: x values only guaranteed for one data signal?

    Hi everyone, Attached is a vi I have developed... When I save the data my .lvm file has a note in the header than says" X values only guaranteed for Power (Filtered)".... Power is one of 9 signals... I am not sure what this note means, but I assume t

  • Unable to edit photo imported from iphone 4S

    Hello, After I imported photos from my iPhone 4S to my PC (with Windows 7) every picture that I try to edit (rotate) I receive an error: "Windows Photo Viewr can't save the changes to this picture because there's a problem with the picture's file pro

  • Can I give a down-payment before financing using the Barclaycard?

    I am looking to buy a mac of about $2000. I know the barclay card as an 18 month 0 APR on purchases over $1600. I am wondering if I can give a $400 downpayment on $2000 mac then finance the remaining $1600? This way I have a lower monthly  payment, i

  • Parse time for OLAP SQL statements

    Hello! I have built ROLAP cube and now trying to analyse performance. Most of problems are coming from SQL statements which are prepared by BI beans (Disco or Excel). These statements have a very big parse time because they use IN predicates with a l