Ho to fix Oxc18a0001 error message
Upon replacement of one ink cartridge, the error message "Oxc18a0001" appears indicating Ink System Failure. Suggests to "Refer to printer documentation" which has nothing concerning this problem.
Now what?
I did lots of research before posting this, and found quite a few people have experienced the same problem.
So after posting, I decided to phone Apple iBooks support too, and one remark in the conversation we had led me to the solution. It might work for you too:
"...have you double-checked the names of all the files to see if there are characters in there that might mess things up" (not word for word, but you know what i mean).
I did, and there were. I got rid of an asterisk, and a hyphen (both in just one file name) and tried again - and the upload went smoothly straightaway.
It's something you might know, but easily overlook.
Thanks to Sara at Apple for reminding me - and hope it works for you too.
Similar Messages
-
how to fix this error message The backup disk image “/Volumes/AirPort Disk/FARES DEL VALLE’s iMac.sparsebundle” could not be accessed (error -1).
The troubleshooting C17 is the specific article.
http://pondini.org/TM/Troubleshooting.html
This is generally a Lion error.. and you will need 5.6 utility to get access to the disk area.
So download the real utility. Run it instead of v6 toy version.
http://support.apple.com/kb/DL1482
Go to the manual setup, disk page and click on disconnect all users.. that will unmount all users connected to the disk and allow it to start working. But there are a number of other issues that are possible cause. Pondini lists some of them. -
How do I fix -50 error message when syncing phoneon Windows 7?
How do I fix -50 error message when syncing phone on Windows 7?
Quit Mail. Back up all data.
Triple-click the line of text below to select it, then copy to the Clipboard:
/Library/Mail/Bundles
In the Finder, select Go ▹ Go to Folder from the menu bar. Paste into the box that opens, then press return.
A folder may open. If it does, move the following item in that folder to the Trash:
UnsubMailPluginMailAppOSX.mailbundle
You may be prompted for your password when you do this.
Launch Mail. -
How do I fix this error message??
How do I fix this error message
"This message could not be delivered and will remain in your Outbox until it can be delivered.
The SMTP server "smtp.mac.com" doesn't support TLS (SSL) on port 25. Please check your account settings and try again."
ThANK YOU!!!
RichMail Help has some articles devoted to sending problems, e.g. “I can't send email” or “I can't send email because the connection to the server on port 25 timed out”. You may want to take a look at them in case there is something there that applies to you.
Something that usually works if you’re trying to use an outgoing (SMTP) server different from the one provided by your ISP (and in the case of .Mac in particular) is changing the outgoing server port to 587 instead of 25 in Preferences > Accounts > Account Information > Outgoing Server Settings. -
How to find remedy to fix STUBBORN Error message: U43M1D204
I am not able to find a way to fix this error message. Apparently corrupted file:
Ps CC (2014) Update Failed
Ae CC (2014) Update Failed
Flash Pro/Mobile Package (2014) Update Failed
Bridge CC Update Failed
Operating the latest version of Mac OS X Yosemite 10.10.3 on Mac Pro and Macbook Pro 17 inches.
Very disappointed. I also researched other sources available on Adobe website with pertaining workaround solution. I see that there is NO solution to fix
U43M1D204 corrupted file(s).
I am dealing with massive urgent project and I find that Adobe customer service has been not very helpful, yet worst customer service experience. It is not
what I once knew Adobe being super duper for best customer service experience years ago. What a shame that Adobe shifted all of its customer service
oversea.
Adobe, please have some heart!
I am counting days to move on and forget Adobe for good UNLESS there is a workaround solution. VERY disappointed!
I expect an answer within an hour or two, or the deal is off! Done. Over. Finished. With. Adobe.
Sorry to say, but I just don't have time to spend HOURS trying to fix yet no solution.
Best, BrianThey are all associated with Adobe server, only posted on Prodesign tool site that's it.
Let me show you for example.
After Effect CC 2014 update link :
http://swupdl.adobe.com/updates/oobe/aam20/mac/AdobeAfterEffects-13.0.0-Trial/13.2.0/setup .dmg
Flash Professional CC 2014 update :
http://swupdl.adobe.com/updates/oobe/aam20/mac/FlashPro14.0PR/14.2/setup.dmg
PS CC 2014 :
http://swupdl.adobe.com/updates/oobe/aam20/mac/AdobePhotoshopCC2014-15.0/15.2.2/setup.dmg
Camera Raw :
http://swupdl.adobe.com/updates/oobe/aam20/mac/PhotoshopCameraRaw8-8.0/9.0.592/setup.dmg
Bridge CC :
http://swupdl.adobe.com/updates/oobe/aam20/mac/AdobeBridgeCC-6.0/6.1/setup.dmg
Note : If you get access denied error ,
Just click on the below link and open Photoshop Elements download page , just keep it open and click on above links :
https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html -
how to fix the error message itunes can't sync apps because it can't determine what apps are installed
Hi,
This may be Helpful
AMDS for Windows
http://support.apple.com/kb/TS1567 -
need a fix to error message...AppleSyncNotifier.exe - Entry Point Not Found The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll
Any answers how to fix it? All Im getting is error for the past 3 days!
-
How I can fix this error message in the Windows Server - kCGErrorFailure: No workspace dictionary?
How I can fix this error message in the Windows Server - "kCGErrorFailure: No workspace dictionary"? This occurs after every startup or restart.
You probably don't need the hard drive and optical drive specs, but here they are?
======================
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 1.5 Gigabit
Description: AHCI Version 1.20 Supported
HL-DT-ST DVD-RW GH41N:
Model: HL-DT-ST DVD-RW GH41N
Revision: PQ06
Serial Number: K3D9BH92251
Native Command Queuing: No
Detachable Drive: No
Power Off: No
Async Notification: Yes
Bay Name: Upper
HL-DT-ST DVD-RW GH41N:
Model: HL-DT-ST DVD-RW GH41N
Revision: PQ06
Serial Number: K3D9BH92251
Native Command Queuing: No
Detachable Drive: No
Power Off: No
Async Notification: Yes
Bay Name: Upper
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
Hitachi HDP725050GLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: Hitachi HDP725050GLA360
Revision: GM4OA5CA
Serial Number: GEA534RJ06E63A
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 1
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk1s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk1s1
Content: EFI
OSXLION:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 192.76 GB (192,758,513,664 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s2
Mount Point: /
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk1s3
Content: Apple_Boot
Hitachi HDP725050GLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: Hitachi HDP725050GLA360
Revision: GM4OA5CA
Serial Number: GEA534RJ06E63A
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 1
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk1s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk1s1
Content: EFI
OSXLION:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 192.76 GB (192,758,513,664 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s2
Mount Point: /
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk1s3
Content: Apple_Boot
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
WDC WD2002FYPS-02W3B0:
Capacity: 2 TB (2,000,398,934,016 bytes)
Model: WDC WD2002FYPS-02W3B0
Revision: 04.01G01
Serial Number: WD-WCAVY7048785
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk3
Rotational Rate: 5400
Medium Type: Rotational
Bay Name: Bay 2
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk3s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk3s1
Content: EFI
BU2TB-Time:
Capacity: 2 TB (2,000,054,960,128 bytes)
Available: 1.1 TB (1,096,926,654,464 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk3s2
Mount Point: /Volumes/BU2TB-Time
Content: Apple_HFS
WDC WD2002FYPS-02W3B0:
Capacity: 2 TB (2,000,398,934,016 bytes)
Model: WDC WD2002FYPS-02W3B0
Revision: 04.01G01
Serial Number: WD-WCAVY7048785
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk3
Rotational Rate: 5400
Medium Type: Rotational
Bay Name: Bay 2
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk3s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk3s1
Content: EFI
BU2TB-Time:
Capacity: 2 TB (2,000,054,960,128 bytes)
Available: 1.1 TB (1,096,926,654,464 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk3s2
Mount Point: /Volumes/BU2TB-Time
Content: Apple_HFS
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
WDC WD10EAVS-00D7B1:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD10EAVS-00D7B1
Revision: 01.01A01
Serial Number: WD-WCAU43604330
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Bay 3
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
Data:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 715.55 GB (715,549,786,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /Volumes/Data
Content: Apple_HFS
WDC WD10EAVS-00D7B1:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD10EAVS-00D7B1
Revision: 01.01A01
Serial Number: WD-WCAU43604330
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Bay 3
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
Data:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 715.55 GB (715,549,786,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /Volumes/Data
Content: Apple_HFS
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
WDC WD1003FBYX-01Y7B0:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD1003FBYX-01Y7B0
Revision: 01.01V01
Serial Number: WD-WCAW31850957
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk2
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 4
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk2s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk2s1
Content: EFI
BUOSXLION:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 697.88 GB (697,881,690,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk2s2
Mount Point: /Volumes/BUOSXLION
Content: Apple_HFS
WDC WD1003FBYX-01Y7B0:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD1003FBYX-01Y7B0
Revision: 01.01V01
Serial Number: WD-WCAW31850957
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk2
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 4
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk2s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk2s1
Content: EFI
BUOSXLION:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 697.88 GB (697,881,690,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk2s2
Mount Point: /Volumes/BUOSXLION
Content: Apple_HFS -
how do I fix an error message of "failed to open a session on this devices" for my HP photosmart 6510 scanner?
Hello Kwastfamily,
It sounds like you are unable to print from your computer to your printer. I would run through the troubleshooting steps in this article:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
After years of playing Snood, w/o problems, I started getting this error message, on my iMac, OS 10.5.8,
with 4 GB of memory when opening Snood: Not enough memory {Error # :: 0, in sound.cp@line 101
My MacBook Pro w. Mac OS 10.6.8 did not have this problem.
Initially I thought that Snood raised its minimum requirement to Mac OS 10.6.
I had several correspondences with Snood. Their tech support is great. Quick and thorough responses.
They thought the issue was in Mac's system preferences/ Sound. It was.
I didn't realize that my sound input and output devices were gone.
The fix was resetting the PRAM. I found this advice on MacFixIt.com.
MacFixIt help with volume: http://reviews.cnet.com/8301-13727_7-10415659-263.html
Resetting the PRAM is on Apple support: http://support.apple.com/kb/HT1379
My sound (music!) is back, along with Snood. So glad I reset the PRAM before reinstalling the OS software!
Thank you to Snood, MacFixIt and Apple.
Happy new year all!Good work, nice post/tip, thanks!
-
When I click on a hyperlink in an email (Outlook), I get the error message "This operation has been cancelled due to restrictions in effect on this computer " and it won't open the hyperlink. None of my Outlook settings are blocking the hyperlink. How can I fix it?
When I click on a hyperlink in an email (Outlook), I get the error message "This operation has been cancelled due to restrictions in effect on this computer " and it won't open the hyperlink. None of my Outlook settings are blocking the hyperlink. How can I fix it?
-
Is this an easy fix? Error message:\pre\Libraries\Asl\Foundation\Src\DirectoryRegistry.cpp-174
I have created a slideshow in PSE5 and exporting to Premiere Elements 3. As it was being exported, I received an error message as Premiere tried to open. The message is listed above in title. It has never happened before.
I have no idea what it means. Wondering if I should just replace with Version 9 but would this correct the problem?
All comments welcome. Thanks!Hi Steve: Your questions were very helpful. I am now able to load Premiere
3!! In my travels over the last few days to see if I could fix the problem,
I also downloaded Premiere 9 but it would not let me access it. It now loads
properly too! I did a defragmentation and also ran the system program to
check for memory problems. The memory checker seemed to re-set my computer
back to the beginning and caused a few moments of panic but everything ok
now. So, thanks very much for taking the time to look at my query and
respond. Much appreciated! -
How to fix this error message?
I've just tried uploading my first book, produced in iBooks Author, but get the following error message:
Error ITMS-9000: "Unable to parse opt file: container.xml" at Book
Does anyone know what it means, and how to fix it?I did lots of research before posting this, and found quite a few people have experienced the same problem.
So after posting, I decided to phone Apple iBooks support too, and one remark in the conversation we had led me to the solution. It might work for you too:
"...have you double-checked the names of all the files to see if there are characters in there that might mess things up" (not word for word, but you know what i mean).
I did, and there were. I got rid of an asterisk, and a hyphen (both in just one file name) and tried again - and the upload went smoothly straightaway.
It's something you might know, but easily overlook.
Thanks to Sara at Apple for reminding me - and hope it works for you too. -
I've been getting this error message and it also shows preferences from the error message. How can I make this message stop from appearing?
I don't see a way to delete my question. A simple restart of the browser fixed the problem.
-
How do I fix the error message
Every time Apple update to their programs I get an Error Message, "TextReaderSetErrorHandler". How do I fix the problem
Just wha are you doing? What do you mean by every time?
If installing iTunes try:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Maybe you are looking for
-
GR/IR amount Diffrences between MIRO and MIGO for Document currency
Dear Friends, I have one issue in MIRO Document posting, I will explain the issue by below steps. 1. I have created Purchase Order with option "Exchange rate fixed" and my PO Exchange rate is 1.8700 Purchase order details Quantity - 2, Price - 23,376
-
The project I was assigned is to write a program that takes numbers from a text file (all on one line, separated by spaces) and store them into a 5-element array. The program is supposed to check and see if the array is big enough to hold all the num
-
i have below situation Client has many discount payment terms.and client does not want to take discount, if theyare running paymen program in last two weeks of each quarter end. as there are four quarters inthe year and at the end of each quarter, in
-
Finding most similar values in 2D array
Hello, I have a 2D array of floating point values. Each row represents the profile of an object (the width in a given plane). Each object is sampled about 40 times - so 40 values per row, and we will end up with about 150 profiles. In other words it'
-
2 apple TV's, stream different content
I want to stream pandora to one Apple TV, and Netflix to the other one. I would like to use Remote to do this. any ideas?