Ho to save a project

In HP Photo Creations, I can find how to open a project, how to view saved projects, and how to view recently viewed projects. I cannot, however, find any screen, any button, any field, to SAVE a project. I'm beginning to suspect that the ability to save a project was removed from the software. Is that the case? If not, where the heck is the "Save" button? On what screen? On what part of that screen? Thanks.
This question was solved.
View Solution.

Sorry, I found the solution and should have posted it here.
Even though I don't use IE, the HP software does, and it was an IE (IE = Internet Explorer) setting that I'd played with in the past in an attempt to get an online video to play correctly. The souce of my problem may or may not apply to someone else; it's a bit unlikely, but here goes...
I've re-created and solved the problem several times, and I've determined that ALL of the following steps are requried. Don't skip anything.
Start IE
Tools \ Internet Options
Advanced tab
Un-check the top option: Use software rendering instead of GPU rendering
OK
Exit IE
Reboot the computer
Start IE
Tools \ Internet Options
Advanced Tab
Reset…
No need to check the Personal Settings box
Reset
Close
Exit IE
At this point the Save buttons are present in HP Photo Creations.
Even if you don't have that same option checked, going through the reset process may fix your problem. If resetting doesn't immediately solve the problem, try a reboot afterward.

Similar Messages

VB6 - can't save a project with flash.ocx control - why won't Adobe fix?

After a full day of research, this seems to be an ongling problem for at least a year now.   VB6 developers who have gone in to do maintenance on their applications that call flash.ocx are finding that they can no longer save their projects because of some change that was introduced by Adobe in the release following flash10e.ocx. In another post here http://forums.adobe.com/message/2931807#2931807 a work around is given of uninstalling flash and installing any version on or before 100452. Because the applications still run fine until the developer tries to make a change and save the VB6 project, the scope of this problem has probably not been fully realized. For this reason, this issue will likely only gain momentum in the future.
I spent the morning contacting several people at Adobe and I discovered the only way apparently to get support for this issue is to open a "web case".   From further research, what I understand a "web case" costs around $200 and with that price there is nothing telling me what comes with a "web case". I mean, if I were to buy one, would the problem be fixed or would they research it and say "I am very sorry but we are not going to fix that".   If there is a guarantee that the problem will be fixed, then can Adobe establish a pool where the $200 cost can be shared by everyone who has the issue?   That couldn't be more than a buck or two each because if you google this problem "System Error &H80004005 using flash.ocx" you will find about 5 pages of people reporting the problem.
Microsoft reports that a System Error &H80004005 error can normally be fixed by chaning the OCX in this manner:
http://support.microsoft.com/kb/223152
Sounds like Adobe made a slight change to the flash.ocx in the release following 100452 that removed the couple of definitions descibed by Microsoft in the URL above. All of Microsoft's suggestions for the developer using the bad OCX call fail (simply adding a line to the OCX:
InitCommonControls(void)
, however, since the problem (and the answer) is locked deep inside the flash.ocx source code, only Adobe can resolve it. Let's hope someone reads this and takes action.   In advance - please and thank you Adobe.

There's little chance anyone from Adobe will see your posting here, though they do on occasion find their way here for reasons unknown. What you might try is to submit a bug report. Going that route at least puts it into a system that requires it to be processed... whether or not the processing will lead to a solution that helps you is indeterminable from this end.
Adobe - Wishlist & Bug Report
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Problem with "Save as Project"

Hi!
I recently saved a song "as project" from the file menu. A folder was created on my desck top with the name of the song but it does not contain a .lso file to load it into Logic Express. The folder does contain another folder with audio files but that's it.
Question- how can I get these fles back into Logic and will they load up correctly (in the proper tracks, correctly synchronized etc) ?
I did some digging and found that there is supposed to be options under File>project> but these are greyed out...
I would be very greatful for any help in getting into these files and resuing the work done so far.
Thanks
Dale

I have used that option on every songs I do in LE, and it always gives me the .Iso files in the project folder. Sometimes I'll start a song in GarageBand for the ease of tossing out a drum part to a scratch guitar, and then I open it with LE, save as Project, and it works the same way every time. I have changed very little prefs in LE from the default.

I just downloaded After Effects CS5.5 Trial and can't save my project

Everything appers to work fine. I can add video, images, sound, but when i click save-save as, nothing happens. When I close the project it asks, do you wish to save "untiled project.aep" before closing and I click yes. Nothing happens, AE closes and the work is lost. I've reinstalled AE twice. I redownloaded the installation packet the second time in case something was corrupted. I used the online chat help, but they told me to call tech support. Trouble is, they're closed for 2-3 days depending upon the holiday. If any of you folks have any ideas, please let me know. Also, I use a lot of Adobe products and as a result, I've deleted all of the preferences folders several times to no avail. I know that those can get wonky and cause issues in Adobe products from time to time. By the way, no errors are coming up. Windows Vista 64 bit
Thanks!

Sounds more like a systemic issue where the dialog is not displayed. Any chance you once had a multi-screen setup and didn't reset it properly? This might draw the dialog in an invisible area. Also generally check whether your file dialog may not appear below the application. As a last thing also check whether your file dialog is not reduced to a tiny spec. Strange as it is, but it's possible to resize it that way and it only appears as a random artifact...
Mylenium

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

Non-destructive editing is an important feature of iMovie HD 6.
iMovie preserves the entire copy of every clip you place into your movie in case you change your mind at a later stage.
So, if you have cut out one minute from a 45 minute clip, iMovie will have stored two complete copies of that clip. This is why is helps to set import as 3-5 minute clips rather than one huge chunk. As DV runs at 13GB per hour your project files can get very big.
One workaround is to complete the editing of a section of the movie, then export that to Quicktime: highlight the clip/s, choose Share-Quicktime, turn on Share selected clips only, and choose Full Quality from the pop-ip menu.
Once you have saved the stand-alone clip to your hard drive, you can re-import it into your project using the File/Import command, and delete the original long clip/s from the project.

Unable to save/publish Projects on Project Server 2010() using Project Pro 2007 and 2010

Hi,
Recently we have upgraded from Project Server 2007 to 2010 SP-2 (BCM enabled) environment and from last few days we are getting issue with Project Plans where PMs are not able to update Projects means save and publish the Project using MS Project 2010/2007.
Whenever PMs try to open project using MS Project 2010 SP-2, it gets load successfully but when they hit save and publish no jobs are getting fired up nothing is happening. Only way to get out from MS Project 2010 window is to close the Project window and
and click discard changes. No error and exception windows are popping out in MS Project 2010, no error/problem/issue clue at all from MS Project 2010.
But when I try to update this Project plan for very first time using MS Project 2007 Sp-2 then I am getting below error
for any subsequent save and publish using MS Project 2007-SP2 getting below error
As an alternative I have tried to open this Project Plan using web and there it is getting opened saved and published successfully from PWA absolutely no issue.
Also I have saved this Project locally as XML and saved and published it on Server successfully. But after someday again this project got corrupt PMs started getting same problem again
I have also looked at ULS logs but not getting anything useful there.
So any guesses why this could happen that can give me pointers to find actual root cause, please let me know.
Thanks much !!!
Sachin Vashishth MCTS

Used below steps to fix the Projects on MSP 2010.
1) Open corrupted project in MS Project connected to PS 2010 Prod env.
2) Goto > Resource > Add Resource > Build Team From Enterprise
3) Check is there any local resource who has not replaced with corresponding enterprise resource. If yes then replace all those local resources with enterprise resource. If not then move to next step.
4) Open resource sheet view and sort or filter by local resources.
5) Then add few columns in resource sheet view like "Windows User Account, Email Address , Base Calendar etc".
6) Now check has any local resource having enterprise attribute assigned to it, if yes then delete or assign local value as appropriate.
7) Then GoTo > File > Save & Send > Save as project file > Save for sharing (at local location)
8) Close project plan window and click "Yes" to save changes.
9) Restart MS Project 2010 and open your project from local location.
10) Then Goto > File > Save & Send > "Publish to Project Server". This will open "Import Project Wizard" to validate Resources and Task in Project.
11) Then in Import Project Wizard window at left hand side click "Map Resource" to validate project resources.
12) This will "Map Project Resource to Enterprise Resource " check all the resources highlighted with "Red" font and map "Standard" calendar to local resources.
Note: Don't worry about local resource assigned "Standard calendar" but still highlighted "Red".
13) Then click "OK" and click on "Continue to step 2" at bottom of "Import Project Wizard".
14) Make sure you get number of errors 0 in step 2, else click on validate resource and take proper corrective action as explained in step 6.
15) If you leave at least one resource as a local resource (unmapped to an enterprise resource), you will see the local resource in the Import Resource grid on the right side
of the Confirm Resources page.
Examine the value in the "Import" column (if not able to see this column then insert this as new column) for the local resource .
The default value is "Yes", then change the value in the "Import" column
to "No", else system will import the local resource as an enterprise
resource.
16) Then "Continue to step 3, 4 and 5".
17) Then at Step 5 , Save project to Project Server by clicking "Save as" link.
18) Then publish the project to update the plan at PWA 2010.
Sachin Vashishth MCTS

Received trascode loading error message when I tried to save a project in Encore CS4`

I have Encore CS4 operating on Windows 8 64 bit. I tried to save a project and received the following message: Error loading transcode preset Internal/Blu-ray NTSC SD MPEG-2. The project is to be a DVD not BLU-ray. I opened the original project as administrator....help
Thanks,
Bryan

Yes, it let me create a project. The error came when I tried to save...not save as...also came when I went to build the DVD. It always saves before it begins to build and the same error message came up again. It is a very simple DVD...no menus....just a plug and play. It is a thearter performance that was shot and then edited in Pro and opening titles and credits added. The thought is that the DVD would be put into the player and the timeline begins to play from the opening titles to the end credits...nothing fancy......

"Save as project" crashes 100% of the time on first save

Hopefully this is covered somewhere but I couldnt find it.
Every time I try to save a new and unsaved little scetch to my external firewire 800 GlyphQ HD (or anywhere) it allways crashes Logic after the save is done.
I can then restart logic and load the newly saved project that just crashed. And everything within the project is saved just fine and works.
When I just save it from there it doesnt crash. Only the first save crashes it.
Any advice or links to similar post appreciated.
Thanks in advance.

I can't give you a solution, but the things I'd try to troubleshoot:
- Perform all the standard troubleshooting procedures (preferences, new default song, ProAppSupport and so on)
- Try the Save As Project to different drives to see if the behaviour may be drive related
- Trash the Project manager database and rescan everything from scratch
- Remove any replacement RAM if you have any, or at least run a RAM test utility
- Reinstall Logic
...and see if any of that helps or gives you clues as to where the problem might be.

Takes a Long Time To Save a project

I've noticed recently that it is taking longer and longer to save a project, like more than 2 or 3 minutes. These are very basic projects, like just one recorded track, with no effects. I'm curious if there are some settings that I have configured improperly that I could fix.

The amount of times it takes to save a project under save as................ Just saving a garageband project takes at least 2-3 minutes, which i feel is kinda crazy......

Not able to save any projects to PWA server from MSPS client

HI,
We are not able to save any project to PWA server using MSPS client. It says saving (0%). But not getting processed to pwa.
Thanks!
Shamsuddeen

Hi Shamsuddeen,
Have you correctly configure in MSProject the connection to Project Server?
See reference below:
http://office.microsoft.com/en-us/project-help/connect-log-on-to-project-server-HA010373238.aspx
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Can I save a project on a flash drive with the videos that are in the project and edit on any computer with premiere pro?

I am trying to edit a home and school and need to edit all the time. Can i save my project file on my flash drive with all the videos and use the flash drive for editing on any computer?

IF all computers are on the exact same build of PrPro. Understand of course that if everything of the project is on one flashdrive, performance in playback & etc. with much in the way of effects or tons of cuts is going to be ... s l o w . But perhaps doable on say a school project, which probably doesn't have the total assets of say a season-length tv sitcom.
Neil

How do I save a project I have worked on in iMovie?

This is my first time working on iMovie and I'm used to PCs were you can File>Save something you are working on. So with iMovie, if I want to save a project, how do I do this?

Thanks for replying. I see that my project is saved in a folder that I created. Its still in the ".rcproject" file type. I'm not able to open this file by clicking on it or by importing it to iMovie.
This may seem like a dumb question, but am I suppose to go to "Share > export > export movie" in order to have this file saved so that I can work on it later on?
Or is this ".rcproject" suppose to open in iMovie?
Answering your question - Yes, I've clicked on the "projects" tab and it says "create new project", but there is nothing under this project. It's blank, instead of showing my project that I have created.

My free trial of FCPX will expire today. How do I save my project to work on it later when I purchase it.

my free trial of FCPX will expire today. How do I save my project to work on it later once I can purchase it. Is that what Export XML does?

xml is used to move your project from one application to another.. like from FCPX to DaVinci Resolve or After Effects or Premiere... but at the moment it has a bug, it links the original media and not the optimized media (the prores 422, just in case you use them...)

Is it possible to save a project in cs4 and then open it in cs3

Hi, i would be greatful if anyone knows if there is a solution to this problem.
At home i use cs4 but in university they only have cs3, i know it is possible to open up a cs3 project in cs4 but unfortunatly if i do any further work on this at home in cs4 and save the project it no longer seems compatible with after effects cs3. So, is it possible to open a cs4 project in cs3?
Any help would be extreamly appreciated.
Ryan

No, it's not possible without using hacks. And Adobe can't support or endorse hacks
Bear in mind that not only there are new features in a new version which can't possibly be recreated by an older version - also, there are enhancements to existing features, which would make them render differently in the two versions.
That said, there are people posting such hacks, as Sébastien pointed out.

How to save a project with all its content?

Hello,
I am looking for a feature inside CS5 Premiere which would do something similar to pack in InDesign that not only saves the project file but packs all links into one folder.
Thanks in advance
Wiktor

Thank you very much for your quick response!

User exit or everuthing else at save on project in CJ20N

Hi,
In CJ20N, I must change the value of PROJ-VERNR according to a value of a specific field (also specific field of the table PRPS) in the WBS screen when I save the project.
I would like to know if there's an exit user (or anything else : enhancement point, ...) to add some specific code when I save in CJ20N ?
Thanks in advance for your answers.

Hi,
Thanks for your answers.
The enhancement spot ES_SAPLCNPB_H works only if there's a network in my project. But some project have no network.
Is there an enhancement spot for the project level ?

Ho to save a project

Similar Messages

Maybe you are looking for