Hoa to delete data from the SE11 database table

Hi Friends,
Need some urgent help.
While uploading data to infotype 6 (addresses) in subtype 4(emergency address), I have uploaded the data twice and it has created a duplicate record now in table PA0006.
I have done this in the quality server. Will this effect the user acceptance testing(UAT) in anyway and how can I delete this data from table PA0006
Pls help me urgently.
Bye
Naveen

Hi Naveen ,
1 .Check what is the time constraint for address infotype .
2.If it is 2 , it would have delimited the record , if it is 3 it would have created another record , if it is one there will be no problem as it would have deleted the recored provided u have given the dates into consideration .
3.It will not be a problem for UAT . If it is not required do a scat for deletion of records .
Regards
Gajalakshmi

Similar Messages

How can i save the data from the Oracle database to my local directory

How can i save the data from the Oracle database to my local directory instead Of saving the data file to the Directory created on the Oracle Server ?
I require to design the Procedure which will pull the data from various tables and needs to store the data in the Client's local directory.

Since SQL*PLUS runs on the client, you can use SQL*PLUS to spool data to your local drive.
You could also use the database to write a a specified drive where all users have access to (mapped network drive, e.g.). I wouldn't recommend doing it that way, but it is sometimes useful when the files are created in some nightly batch run.

THE DATA FROM THE ORACLE DATABASE VIEW DATA IS NOT REFERESHED AUTOMATICALLY

THE DATA FROM THE ORACLE DATABASE VIEW DATA IS NOT REFERESHED AUTOMATICALLY IN OBIEE DASHBOARD(ANSWERS)
UNLESS AND UNTILL I OPEN THE ORACLE BI ADMINISTRATOR TOOL AND DO UPDATE ALL ROWCOUNT AND THEN SAVE THE RPD.
WHERE AS ORACLE DATABASE TABLE DATA IS AUTOMATICALLY REFRESHED.
PLS SOMEONE HELP OUT IN THIS ISSUE.

Check whether you have enable cache on that view?

How configure a primavera web service to return data from the second database?

Hi everyone,
We have P6 with first WS deployed on a single server weblogic domain. The first WS return data from the first database instance.
Then deployed advanced second WS on a separate weblogic domain server with a different port. Configured second WS with <WS2_INSTALL_HOME>/bin/dbconfig.sh, creating a new branch of a configuration that specifies a different second instance of the database. However, this configuration is ignored and second web services return data from the first database.
We have one domain, which including next servers:
Name / Host / Port / Deployments
P6 / localhost / 0001 / P6(v8.3), p6ws1(v8.3)
p6ws2 / localhost / 0002 / p6ws2(v8.3)
Now we have two different file BREBootstrap.xml.
P6 BREBootstrap.xml:
<Database>
<URL>jdbc:oracle:thin:@db1:1521:db1</URL>
<UserName>pubuser</UserName>
<Password>anycriptopass1</Password>
<Driver>oracle.jdbc.OracleDriver</Driver>
<PublicGroupId>1</PublicGroupId>
</Database>
<CfgVersion>8.330</CfgVersion>
<Configurations>
<BRE name="P6 Config_DB1" instances="1" logDir="anydir/P6EPPM/p6/PrimaveraLogs"/>
</Configurations>
p6ws2 BREBootstrap.xml:
<Database>
<URL>jdbc:oracle:thin:@db2:1521:db2</URL>
<UserName>pubuser</UserName>
<Password>anycriptopass2</Password>
<Driver>oracle.jdbc.OracleDriver</Driver>
<PublicGroupId>1</PublicGroupId>
</Database>
<CfgVersion>8.330</CfgVersion>
<Configurations>
<BRE name="P6 Config_DB2" instances="1" logDir="anydir/P6EPPM/ws2/PrimaveraLogs"/>
</Configurations>
‘P6 Config_DB1’ and ‘P6 Config_DB2’ including Database property for 1 and 2 database respectively.
How to configure a second web service to return data from the second database?
Thanks in advance!
Regards,
Dmitry

OK, so I got this to work this morning with Username Token Profile (with little help from Oracle Support).
I followed your steps 1-4 but in step 2 I didn't add the -Ddatabase.instance=2 because I want to check to see if my code could swap between different instances.
It appears for Username Token Profile to use Database Instance, you need to set it in the soap header.
So my soap request looks like this:
<?xml version="1.0" encoding="utf-8"?>
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" xmlns:u="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
 <s:Header>
 <DatabaseInstanceId xmlns="http://xmlns.oracle.com/Primavera/P6/WS/Authentication/V1">2</DatabaseInstanceId>
 <o:Security s:mustUnderstand="1" xmlns:o="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
 <u:Timestamp xmlns:u='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd' u:Id='uuid-327b6ed1-b26d-4a61-81d5-e326174c1961-3'>
 <u:Created>2014-10-23T04:28:01.152Z</u:Created>
 <u:Expires>2014-10-23T04:29:01.152Z</u:Expires>
 </u:Timestamp>
 <o:UsernameToken u:Id='uuid-327b6ed1-b26d-4a61-81d5-e326174c1961-3' xmlns:u='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd'>
 <o:Username>admin</o:Username>
 <o:Password Type='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText'>password</o:Password>
 <o:Nonce EncodingType='http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary'>vJBQhCc28bAeszej7gOaiC2tVCQ=</o:Nonce>
 <u:Created>2014-10-23T04:28:01.152Z</u:Created>
 </o:UsernameToken>
 </o:Security>
 </s:Header>
 <s:Body xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
 <ReadProjects xmlns="http://xmlns.oracle.com/Primavera/P6/WS/Project/V2">
 <Field>ObjectId</Field>
 <Field>Id</Field>
 <Field>Name</Field>
 <Field>Status</Field>
 <Field>StartDate</Field>
 <Field>FinishDate</Field>
 <Field>DataDate</Field>
 <Filter>Id = 'EC00515'</Filter>
 </ReadProjects>
 </s:Body>
</s:Envelope>
This request pulled the project from the second instance.
V/r,
Gene

How i cen get back deleted data from the bin?

how i cen get back deleted data from the bin?

Not once you have put the data in the trash and pressed the button to delete it.
There may be some hope if you can understand what I am telling you in my first post to you.
Time machine is too complex to explain in this kind of post but I am giving you five links below which should explain quite a lot. There are no formal instruction manuals for Time Machine.
Time Machine Tutorial
Time Machine 101
How to back up and restore your files This in particular
Time Machine Features
Apple - Support - Mac OSX v10.5 Leopard Time Machine

Program or Function module to delete data from Open Hub Destination Table

Hi All,
Can anybody suggest me a Program or Function module to delete data from Open Hub Destination Table.
Thanks & Regards,
Vinay Kumar

You can simply goto t-code SE14 mention the open hub destination table and Delete data by clicking on "Activate and Adjust database" with radio button "Delete Data".
Regards,
Arminder

Update/insert/delete data from xcelsius to Database via web service

Hi,
I need to create dashboard that go function can update/insert/delete data send to Database thru web services, as i know got 2 xcelsius add-on software which support those of function InfoBurst and flynet 
InfoBurst
http://www.infosol.com/azbocug/minutes/4-Writeback%20to%20a%20Database%20with%20Xcelsius.pdf
flynet 
http://www.flynetviewer.com/public/community/Blogs/FlynetXcelsiusServerUser/default.aspx
Except this 2 purchase add-on xcelsius, any other solution ?
Maybe need to write some in MSSQL or C# programming which enable insert, update, delete ...etc ?
*note: i not use Xcelsius Engage Server , i use Xcelsius Engage only
thanks,
regards
s1
Edited by: Leong Pui Kee on Mar 1, 2011 6:06 AM

Hi,
As of now in Xcelsius/Dashboard Design there is no feature or functionality to insert/update/delete data from database.
Solution:
Create a Web service in let’s say C# or Java, which will perform insert/update/delete operation.
In Xcelsius add Web Service connection and user above web service.
Xcelsius Web Service connection provides option to pass input values to a Web Service (Input Pane) and get the result (Output values pane).
We can pass values to be written to the database as a input to Web Service via Web Service connection from Xcelsius and write data to the database.
Note:
Performing delete operation from Xcelsius Dashboard could be risky and may delete important data from database. I would not prefer giving delete option/functionality in Xcelsius dashboard.
Hope this helps!
Thank you.
Regards,
Vinay Mhaske

How do you get deleted data from the app Tote M'Notes back on iPad ????

How do I get deleted data from app Tote M'Notes back???...Not displaying in my notebook anymore...also how do i retrieve data from apps stored in Icloud?

Why don't you use the fully-qualified-domain-name (FQDN) of your GW and perform a re-direct to this ?
This should be known (and everytime the same), addtionally you won't have any problems if there's any load balancer in between or in fron of the GWs.
Secondly you'll have problems to get the IP -address if there's any proxy server involved.
/ulf

How to delete data from Open Hub DB table when the DTP is inactive..

Hi Gurus,
I am transporting some 2LIS extractors to QA with some enhancements.
The data goes to an OHD ( third party ) pulled by a process outside SAP enabled by a BAPI.
Now , By mistake , I imported the OHDs with still some old left in the DB table of OHD ( /bic/oh<>)
It's not allowing to me do manual activation and also DTP is inactive ( cannot do a delta DTP and make no of records zero )
I want to delete the data in the OHD DB tables ..any clues....
Thanks,
Chetan

Hi Chetan,
The OHD table name is usually /BIC/OH<OHD-name> . You can find it in the OHD definition.
Go to transaction se14, give the table name and say edit.
Select Delete Data and say Activate and adjust database.
This will delete the entire contents of the OHD DB table.
Regards,
Uma Maheswari

In a PrC, how to delete data from the PSA that have been loaded in Prcs Chn

Hello,
In a process chain, how can I delete the data from the PSA that have been loaded within that process chain. I don't want to delete data that belongs to other business units that use the same datasource.
Thanks,
Andre

I dont think so you can achieve that, PSA is actually datasource dependent.
One you load from a datasource to PSA.That is accesible by multiple DTPs if you have created so.
As you said "I don't want to delete data that belongs to other business units that use the same datasource."
If you delete the PSA, you may have to repull the data from source system again and if thats delta it wont work out.
As said by above ppl you can include the "Delete PSA" in process chain but choose some 15 days buffer.
Hope this helps.

Frequency migrate data from the operational database SCOM 2012 SP1

What is the frequency with which
information is migrated from the operational database
to the data warehouse database,
are in separate servers and should perform
maintenance tasks such as defragmentation to optimize
disk space, this is recommended?
thank you very much

Hi
Refer below link for data sync from DB to DW
http://blogs.technet.com/b/jonathanalmquist/archive/2010/01/24/how-and-when-is-data-written-or-synchronized-to-the-data-warehouse.aspx
Dataware house
http://blogs.technet.com/b/stefan_stranger/archive/2009/08/15/everything-you-wanted-to-know-about-opsmgr-data-warehouse-grooming-but-were-afraid-to-ask.aspx
Regards
sridhar v

Deleting Data from the cube

Is there any function module which drops all the data from the cube?
Or is there a function module which deletes all the requests from the cube?
Thanks.

Hello,
Check one of the foll:
RSAPO_DELETE_CUBE
RSAPOADM_CLEANUP_CUBE
RSAR_DELETE_ICUBE
RSAU_INFOCUBE_CONTENT_DELETE
RSDG_CUBE_DELETE
RSDPC_DROP_CUBE
RSDPM_DB_CLEANUP_CUBE
RSDPTEST_MOLAP_CUBE_CLEANUP
RSDPW_INFOCUBE_DELETE_ALL_DATA
RSDPW_INFOCUBE_DELETE_DATA
RSDPW_INFOCUBE_DROP
RSDP_MDMETA_ICUBE_DROP
Regds,
Shashank

How to delete data from the table PA0007

Hi Friends,
Thank you for your kindly help.
When I upload data to infotype 0007(planed working time),
there is something wrong with the infotype 2011. So I want
to delete the data of infotype 0007. While using the program RPUREOPN to delete the data, the system will say:0007 cannot be deleted because of time constraint 1/A.
Now how can I delete the data from table PA0007?
Pls help me urgently.
Best wishes
Anne

Hi Sikindar,
Thank you for your help.
There is another question. There are five clients (Client 300,310,320,330,350) in my HR DEV system. I just want to delete the data of infotype 0007 in client 350. When I change the the time constraint and delete the data in client 350, the data of infotype 0007 in other clients will be safe or not?
Thank you again for your help!
Best wishes
Anne

HTTP post data from the Oracle database to another web server

Hi ,
I have searched the forum and the net on this. And yes I have followed the links
http://awads.net/wp/2005/11/30/http-post-from-inside-oracle/
http://manib.wordpress.com/2007/12/03/utl_http/
and Eddie Awad's Blog on the same topic. I was successful in calling the servlet but I keep getting errors.
I am using Oracle 10 g and My servlet is part of a ADF BC JSF application.
My requirement is that I have blob table in another DB and our Oracle Forms application based on another DB has to view the documents . Viewing blobs over dblinks is not possible. So Option 1 is to call a procedure passing the doc_blob_id parameter and call the web server passing the parameters.
The errors I am getting is:
First the parameters passed returned null. and
2. Since my servlet directly downloads the document on the response outputStream, gives this error.
'com.evermind.server.http.HttpIOException: An established connection was aborted by the software in your host machine'
Any help please. I am running out of time.
Thanks

user10264958 wrote:
My requirement is that I have blob table in another DB and our Oracle Forms application based on another DB has to view the documents . Viewing blobs over dblinks is not possible. Incorrect. You can use remote LOBs via a database link. However, you cannot use a local LOB variable (called a LOB locator) to reference a remote LOB. A LOB variable/locator is a pointer - that pointer cannot reference a LOB that resides on a remote server. So simply do not use a LOB variable locally as it cannot reference a remote LOB.
Instead provide a remote interface that can deal with that LOB remotely, dereference that pointer on the remote system, and pass the actual contents being pointed at, to the local database.
The following demonstrates the basic approach. How one designs and implements the actual remote interface, need to be decided taking existing requirements into consideration. I simply used a very basic wrapper function.
SQL> --// we create a database link to our own database as it is easier for demonstration purposes
SQL> create database link remote_db connect to scott identified by tiger using
2 '(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521))(CONNECT_DATA=(SID=dev)(SERVER=dedicated)))';
Database link created.
SQL> --// we create a table with a CLOB that we will access via this db link
SQL> create table xml_files( file_id number, xml_file clob );
Table created.
SQL> insert into xml_files values( 1, '<root><text>What do you want, universe?</text></root>' );
1 row created.
SQL> commit;
Commit complete.
SQL> --// a local select against the table works fine
SQL> select x.*, length(xml_file) as "SIZE" from xml_files x;
 FILE_ID XML_FILE SIZE
 1 <root><text>What do you want, universe?</text></root> 53
SQL> --// a remote select against the table fails as we cannot use remote pointers/locators
SQL> select * from xml_files@remote_db x;
ERROR:
ORA-22992: cannot use LOB locators selected from remote tables
no rows selected
SQL> //-- we create an interface on the remote db to deal with the pointer for us
SQL> create or replace function ReturnXMLFile( fileID number, offset integer, amount integer ) return varchar2 is
2 buffer varchar2(32767);
3 begin
4 select
5 DBMS_LOB.SubStr( x.xml_file, amount, offset )
6 into
7 buffer
8 from xml_files x
9 where x.file_id = fileID;
10
11 return( buffer );
12 end;
13 /
Function created.
SQL> --// we now can access the contents of the remote LOB (only in 4000 char chunks using this example)
SQL> select
2 file_id,
3 ReturnXMLFile@remote_db( x.file_id, 1, 4000 ) as "Chunk_1"
4 from xml_files@remote_db x;
 FILE_ID Chunk_1
 1 <root><text>What do you want, universe?</text></root>
SQL> --// we can also copy the entire remote LOB across into a local LOB and use the local one
SQL> declare
2 c clob;
3 pos integer;
4 iterations integer;
5 buf varchar2(20); --// small buffer for demonstration purposes only
6 begin
7 DBMS_LOB.CreateTemporary( c, true );
8
9 pos := 1;
10 iterations := 1;
11 loop
12 buf := ReturnXMLFile@remote_db( 1, pos, 20 );
13 exit when buf is null;
14 pos := pos + length(buf);
15 iterations := iterations + 1;
16 DBMS_LOB.WriteAppend( c, length(buf), buf );
17 end loop;
18
19 DBMS_OUTPUT.put_line( 'Copied '||length(c)||' byte(s) from remote LOB' );
20 DBMS_OUTPUT.put_line( 'Read Iterations: '||iterations );
21 DBMS_OUTPUT.put_line( 'LOB contents (1-4000):'|| DBMS_LOB.SubStr(c,4000,1) );
22
23 DBMS_LOB.FreeTemporary( c );
24 end;
25 /
Copied 53 byte(s) from remote LOB
Read Iterations: 4
LOB contents (1-4000):<root><text>What do you want, universe?</text></root>
PL/SQL procedure successfully completed.
SQL> The concern is the size of the LOB. It does not always make sense to access the entire LOB in the database. What if that LOB is a 100GB in size? Irrespective of how you do it, selecting that LOB column from that table will require a 100GB of data to be transferred from the database to your client.
So you need to decide WHY you want the LOB on the client (which will be the local PL/SQL code in case of dealing with a LOB on a remote database)? Do you need the entire LOB? Do you need a specific piece from it? Do you need the database to first parse that LOB into a more structured data struct and then pass specific information from that struct to you? Etc.
The bottom line however is that you can use remote LOBs. Simply that you cannot use a local pointer variable to point and dereference a remote LOB.

Any way to extract data from the "Organizer" database?

I asked a similar question in the Lightroom forum but I'm asking it here as well. I'm thinking of either getting Lightroom or Elements but my only concern is being able to access to all of the meta-data that I tag my photos with in the "Organizer". Most likely I'll spend hours organizing my photos and I want to be able to access this data from outside the organizer for read-only purposes.
I realize that from inside of orgainizer all of this is available to me but I want to be able to use other tools and apps (that I'll write myself when needed) to get access to my photo catalogs.
Does Adobe have any sort of API or library that 3rd party apps can use to access the data in Organizer? I searched the Adobe web-site but didn't find anything. Ideally I could run a SQL query against the database to get what I want.

This idea intrigued me, so a did a Google search on "extract photo metadata", which resulted in some interesting links.
You might want to investigate some of these further.
One which looked quite interesting along the lines of the read/write of metadata can be found here:
http://devzone.zend.com/article/4025
Good Luck...

Hoa to delete data from the SE11 database table

Similar Messages

Maybe you are looking for